REPAIR TO MISC BS WORKS

Amount

Note:-S&F new components in lieu of dismantled components including tightening the joints, pinning, screwing nailing,wedging, glueing, providing hinges,applying putty to level the surface, placing every part in-tact and polishing the disturbed portion & Scratching the entire wooden pallets ,filling putty to the bore holes making surface smooth by scratching it with sand emery paper, the Wooden furniture shall be french polished with high gloss finish shade as approved by Engineer In charge. ,after properly cleaned and smoothened the surface.Painting the steel disturbed portion & painting steel surface with two coats of synthetic enamel paint of existing shade with spray gun & apply red oxide primer where ever required after properly smoothening the surface with sand paper Top shall be 18 mm thick pre-laminated particle board both side laminated, duly fixed with half round teak wood beading in matching shade with synthetic adhesive. Make of particle board : Century/Archid /Greenply.All kind of work will be executed where the furniture exist in different User Units of GE Rangia including BSO's Furniture Yard at Rangia, and office hours only as directed by Engineer-in-Charge.(Note applicable for item Srl No-1.01 to 20.01).

Table dining 8 pers :FD-273- S & F of Top as per drg.

S & F of Legs as per drg

S & F of Rails as per drg

Polishing of Table dining 8 pers as per above note.

Table dining 4'x3' : FD/MAP-II/03- S & F of Top as per drg.

S & F of Legs as per drg

S & F of Rails as per drg

Polishing of Table dining 4'x3' as per above note.

Chair writing FD-280- S & F of Arms as per drg.

S & F of Front leg as per drg.

S & F of Rear legs as per drg.

S & F of Rails including hole of canning as per drg.

Polishing of Chair writing as per above Note.

Removing the existing unserviceable cane plastic from the chair and Recanning the chairs with plastic cane as existing size.

Chair Easy FD-229- S & F of Arms as per drg.

S & F of Front leg as per drg.

S & F of Rear legs as per drg.

S & F of Rails including hole of canning as per drg.

Polishing of Chair easy as per above Note.

Removing the existing unserviceable cane plastic from the chair and Recanning the chairs with plastic cane as existing size.

Teapoy FD-382:- S & F of Top as per drg.

S & F of Legs as per drg

S & F of Rails as per drg

S & F of stiffner as per drg

Polishing of Teapoy as per above note.

Table Peg FD-382:- S & F of Top as per drg.

S & F of Legs as per drg

S & F of Rails as per drg

S & F of stiffner as per drg

Polishing of Table Peg as per above note.

Table dressing ladies with mirror FD-251:- S & F mirror of size 1220x366x5.5 mm fixed with the wooden frame as per drg.

S & F of aluminium channel with including 5.5 mm thick dual sliding glass set

Repair of drawer as per drg.

Repair of wooden leg frame as per drg.

Polishing of Table dressing ladies with mirror as per above note.

Table office officer steel FD-1003:- S & F of Top as per drg.

Repair of steel portion by removing denting, welding/grinding and making surface smooth finish.

S & F of lock as per existing pattern.

Painting of table office officer steel as per above Note.

Chair Revolving TP :- S& F of Arms of Chair as per exisitng pattern.

S& F of Pedestal of Chair as per exisitng pattern.

S& F of Hydraulic of chair as per exisitng pattern.

S& F of Chair seat as per existing pattern.

S& F of Chair back as per existing pattern.

S & F of frame of Chair as per existing pattern.

Locker steel 3 Unit : FD-127(M) - S&F of CP handle as per existing pattern.

Repairs to Steel portion by welding/Grinding/applying putty to making surface smooth finish.

S & F of lock as per existing pattern. (make- harrison/godrej/link)

S & F of Leg as per existing pattern.

Painting of Locker steel 3 Unit as per above Note.

Almirah small/medium steel :FD-1032 / FD-243 :- S & F of lock as per existing pattern and shape. Make-Harrison/Godrej/Link

S & F of CP handle as per existing pattern.

Repair of steel portion with welding,grinding and applying putty to smooth the surface.

S & F of Leg as per existing pattern.

Painting of Almirah small/Medium steel as per Note.

Book case steel :FD-1028 :- S & F of handle as per existing pattern and shape. Make-Harrison/Godrej/Link

S & F of lock as per existing pattern and shape. Make-Harrison/Godrej/Link

S & F of glass as per existing pattern and shape.

Repair of steel portion with welding,grinding and applying putty to smooth the surface.

Painting of Book case steel as per Note.

Book Shelf open large steel :FD-69 (M) :- Repair of steel portion with welding,grinding and applying putty to smooth the surface as specified and directed by engineer in charge.

Painting of Book shelf open large steel as per Note.

Rack 6 tier steel :FD-1038 :- Repair of steel portion with welding,grinding and applying putty to smooth the surface as specified and directed by engineer in charge.

Painting of Rack 6 tier steel as per Note.

Trestle store room steel :FD-1043 :- Repair of steel portion with welding,grinding and applying putty to smooth the surface.

Painting of Trestle store room steel steel as per Note.

Charpoy GI Pipe Plytop:- FD-220 :- Taking out existing broken plywood from the charpoy by loosining the nut bolts with washer. S&F of new 12 mm thick BWR grade plywood fixed to Charpoy from with Nut, Bolts, Make of Plywood- Greenply/Century Ply/Archidply

S&F of flat iron of size 40 mmx5 mm, 150mm long, support the plywood on charpoy as specified and directed by Engineer Incharge

S&F of Long rail of 32 mm dia medium grade GI pipe both side threaded as specified in drg and directed by Engineer in charge.

S&F of three way GI elbow as specified in drg and directed by Engineer in charge.

Taking out existing damage short rails, Cutting and threading of rails for converting it into legs duly threaded as specified in drg and directed by Engineer In Charge.

Charpoy iron pipe plytop:- FD/E6/MAP/01: Taking out existing broken plywood from the charpoy by loosining the nut bolts with washer. S&F of new 12 mm thick BWR grade plywood fixed to Charpoy from with Nut, Bolts, Make of Plywood- Greenply/Century Ply/Archidply

Repairs to Steel portion by welding/Grinding/applying putty to making surface smooth finish.

S & F of Hard rubber shoes as per drg

Painting of charpoy iron pipe plytop as per above note

S&F of prelaminated particle board fixed with half round beeding all around the board in various furniture as required as specified and directed by Engineer in Charge.

S&F of BWR grade plywood of 6 mm thick in various furniture as required as specified and directed by Engineer in Charge.

S&F of 0.8 mm thick sunmica with & including 18 mm thick BWR grade plywood all around PVC edging, pasted with good quality of Dendrite as required as specified and directed by Engineer in Charge.

RK STEEL FABRICATORs (BID ID -3092789)

M.G. ENTERPRISE (BID ID -3104806)

M/S NARAYAN ENTERPRISE (BID ID -3093746)