REPAIR TO FLOORING PLASTERING PLINTH PROTECTION BRICK WORK ROOF SHEET AND TILING IN CERTAIN BLDGS OF OTM ACCN OF MH DEOLALI IN THE AOR OF AGE B/R HAIG LINE UNDER GE DEOLALI

Amount

Demolition of stone slabs and tiles laid, bedded and pointed in any mortar of any description or thickness in floors, aprons, walls etc complete all as specified and as as directed.

M&L for Machine cut kota stone slab flooring 18-20 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab inclunding rubbing and polishing complete including screed bed 15mm thick in CM (1:6) complete all as specified and as directed.

All as per item No 02 above, but as in skirting over 10mm thick backing coat in CM (1:4).

M&L for non skid joint free ceramic coloured tiles of size 600 mm x600 mm 7 to 8mm thick (coloured) (Square/rectangular) as in floors, set & jointed in neat cement slurry and pointed in coloured cement over 15mm thick screed bed in CM (1:6) complete all as specified and directed.

All as per Sl item No 4 above but in skirting over 10mm thick backing coat in CM (1:4) complete all as specified and directed.

M&L for 8mm thick (square/rectangular) Vitrified ceramic tiles (GVT) area of each tile exc 0.36 sqm but n exc 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM (1:6) complete all as specified and directed.

All as per Sl item No 6 above but in skirting over 10mm thick backing coat in CM (1:4) complete all as specified and directed.

S & F in repair 15 mm bore, fancy type, bib taps, long body, cast copper alloy, 15mm bore with fancy chromium plated screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed by Engr-in-Charge. Make : Cat Part No FLR- 5047 N of Jaquar or equivalent in kohlar, grohe and Roca

S & F in repair 15 mm bore, fancy type, angular valve, cast copper alloy, screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for unions complete all as specified and as directed by Engr-in-Charge. Make : Cat Part No FLR-5053 N of Jaquar or equivalent in kohlar, grohe and Roca

M&L Glazed ceramic coloured tiles of size 600x300x7 mm/ 450x300x7mm thick on vertical surfaces of walls such as skirting dado etc over 10mm thick cement plaster backing coat as in CM 1:4 and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as spd and directed.

M&L for non skid ceramic tiles of size 6-7mm thick (coloured) (Square/rectangular) area of each tile exc 0.11 sqm, but n exc 0.18 sqm in floors/skirting , set & jointed in neat cement slurry and pointed in coloured cement over 15mm thick screed bed in CM (1:6) complete all as specified and directed.

M & L for chequered cement concrete tiles 30cm x 30cm x 20mm thick Rouber moulded glossy finish with coloured cement and pigment, including 15mm thick screed in CM 1:6, set jointed & pointed in neat cement slurry in floors complete all as specified and as directed.

M&L for precast cement concrete interlocking tiles 60 mm thick Rouber moulded, prepolished with strength 35 N/sqmm as in floor/pavement laid on 30 mm thick stone dust cushioning laid dry to the profile complete all as specified and as directed.

M&L for precast cement concrete interlocking tiles 80 mm thick Rouber moulded prepolished with strength 40 N/sqmm as in floor/pavement laid on 30 mm thick stone dust cushioning laid dry to the profile complete all as specified and as directed.

M&L for Granite Ist Quality Z black 18-20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone work as in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. including including cutting and polishing types including 15mm thick screed bed in CM (1:6), complete all as specified and as directed.

M & L for Machine cut cudappa stone slab 20-22 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations all as specified.

Taking up or down steel tubing and connections, including cleaning for re-fixinf and removal to store 15 mm dia pipe complete all as specified .

Taking up or down steel tubing and connections, including cleaning for re-fixinf and removal to store 20mm dia pipe complete all as specified .

Taking up or down steel tubing and connections, including cleaning for re-fixinf and removal to store 25mm dia pipe complete all as specified .

S & F 15 mm dia tubes medium grade galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors including cutting chases in stone,concrete block or slab wall pinning in making good to facing where required the sufraces for concelled water supply fitting complete all as specified.

S & F 20 mm dia tubes medium grade galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors including cutting chases in stone,concrete block or slab wall pinning in making good to facing where required the sufraces for concelled water supply fitting complete all as specified.

S & F 25 mm dia tubes medium grade galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors including cutting chases in stone,concrete block or slab wall pinning in making good to facing where required the sufraces for concelled water supply fitting complete all as specified.

S & F in repairs 15 mm dia CP Stop valves/angle valve, cast copper alloy, screwed down, high pressure, fancy type, chromium plated screwed both ends for iron pipe or for unions and fixed complete all as specified.

S & F in repairs 15 mm dia CP bib taps, cast copper alloy fancy type with chromium plated, screwed for iron pipe or for brass ferrule and fixed complete all as specified.

S & F in repairs 15 mm dia CP Pillar taps, long braide cast copper alloy, with capstan heads, chromium plated with fancy type, screwed down high pressure, with or without lettered 'Hot' or ' Cold' with long screwed shanks and flynuts, screwed for iron pipe and fixed complete all as specified.

S&F in repairs CP Sink mixer with regular swinging spout ( wall mounted model ) 15mm dia, with connecting legs and wall flange complete all as specified.

S&F in repairs glazed earthen ware viterous china wash basin white coloured (flat back or angle back type), size 550x400 mm and including CI brackets, outlet of 32 mm bore HDPE outlet pipe with necessary fittings, 32 mm bore brass CP waste couplings and bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed etc complete all as directed.

S & F in repairs Vitreous China wash basin, white, flat back, size 580 x 480 mm with pedestal including brackets / fasteners bolt etc with 32 mm dia CP Waste fittings, brass, chromium plated with PVC waste pipe complete all as specified and directed.

S & F 32 mm dia Low density polyethylene pipes ( LDPE) of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc complete all as specified.

S & F in repair brass chromium plated Tubular towel rail, 20 mm dia, D type, 60 cm long between flanges complete all as specified.

S&F in rep vitreous china squatting Pan “Orissa” Pattern, of size 580mm x 440mm white with integral foot rests and trap (excluding flushing cistern and flush pipe) including provn of cement concrete bedding complete as fixed complete all as specified.

S & F in repairs 10 Litrs PVC valveless,low level flushing cistern, low level, white with inlet, ball valve, float and handle including brackets with 32 mm dia flush pipe of polyethylene of low or high density or PVC, for low level cistern complete all as specified.

S&F in rep vitreous china wash down water closet pan (pedestal pattern), EWC white including connection to drain (or outgoing pipe) and to flushing pipe with and including plastic water closet seat, white closed pattern with flat bottom, cover and mild steel hinges device complete all as specified.

S & F in repairs Plastic water closet seat, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified.

S & F in repair 75 mm dia PVC ( SWR ) floor trap, plain with grating including jointing with solvent cement complete all as specified.

S & F PVC connections15 mm size with PTMT nuts of length 450 mm complete all as specified.

Dismantling water tanks any type ( RCC/PVC) incl disconnecting all connection of capacity exc 250 & not exc 500 ltrs.

Dismantling water tanks any type ( RCC/PVC ) incl disconnecting all connections of capacity exc 500 & not exc 1000 ltrs.

Supply and fixing, hoisting PVC water storage tank of 1000 ltr capacity including Supplied and fixed 20mm dia PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed.(Minimum weight 15mm-142 gms/20mm-210gms/25mm-455 gms/40mm-690 gms float valve assembly complete all as specified and directed including tank nipple etc.

Supply and fixing, hoisting PVC water storage tank of 500 ltr capacity including Supplied and fixed 20 mm dia PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed.(Minimum weight 15mm-142 gms/20mm-210gms/25mm-455 gms/40mm-690 gms float valve assembly complete all as specified and directed incl tank nipple etc.

S&F in repairs Centre hole basin mixer with Popup Waste System with 450 mm Long Braided Hoses fixed complete all as specified.

S&F in repair Vitreous China Urinal, Half stall type, white, complete including providing and fixing plus, bedding urinal against wall in cement mortar 1:2 securing urinal to plus with and including 60mm long brass screws, sprinkler etc pointing around urinal back in cement, including waste pipe, CP urinal spreader complete all as specified and as directed.

S&F in repair soap dish chromium plated and type fixed to plugs with CP brass screw fixed in repairs.

S & F in repairs ball valve high pressure of PTMT wiyh epoxy coated , aluminium rod & high density plastic ball complete screwed for iron pipe or brass ferrule 20 mm bore complete.( 210 gms weight ) complete all as specified.

S&F in repairs CP Sink mixer with regular swinging spout ( wall mounted model ) 15mm dia, with connecting legs and wall flange Cat Pot No FLR-5309N of Jaquar or equivalent in kohlar, Grohe and Roca complete all as specified.

S&F in repairs Centre hole basin mixer with Popup Waste System with 450 mm Long Braided Hoses 20 mm cartridge size mm dia, Cat Pot No FLR-5167NB of Jaquar or equivalent in kohlar, grohe and Roca complete all as specified.

S&F in repairs CP wall mixer with provision for overhead shower with 115 mm Long Bend Pipe on upper side connecting Legs & wall flange Cat Pot No FLR-5273UPR of Jaquar or equivalent in kohlar, grohe and Roca complete all as specified and directed.

S & F in repair floor door stopper of aluminium alloy and tongue, anodised with hard drawn steel overall length of cover plate 140mm.as in repairs complete all as specified.

S&F in repairs chromium plated shower roses with swivel joints 125 mm dia size incl fixing to GI pipe/union fixed in repairs.

S&F Health faucet(ABS body mild steel chromium plated suitable for 15mm dia pie with 1.25m long flessible pipe & ABS hook including making connection and fixed in repairs complete all as specified and as directed.Make-Somany,Jaquar,Hindware,Cera

S&F in repairs CP wall mixer with provision for overhead shower with 115 mm Long Bend Pipe on upper side connecting Legs & wall flange complete and fixed complete all as specified and directed.

Dismantling of asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings including ridges etc complete all as specified and directed.

S & F 16mm dia (internal dia) CPVC pipes with all fittings SDR 11 & Plain CPVC SDR 11 fixed to walls and ceilings with adequate nos of clamps or laid in floors including cutting chases in stone,concrete block or slab wall pinning in making good to facing where ever required to the sufraces for concelled water supply including CPVC brass fitting such as elbow, socket, nipple required for fixing of plumbing items complete all as specified and as directed. (Note : No extra payment shall be made for cutting chases & CPVC fittings)

S & F 20mm dia (internal dia) CPVC pipes with all fittings SDR 11 & Plain CPVC SDR 11 fixed to walls and ceilings with adequate nos of clamps or laid in floors including cutting chases in stone,concrete block or slab wall pinning in making good to facing where ever required to the sufraces for concelled water supply including CPVC brass fitting such as elbow, socket, nipple required for fixing of plumbing items complete all as specified and as directed. (Note : No extra payment shall be made for cutting chases & CPVC fittings)

Dismantling of Single layer Mangalore pattern or similar tiles in roofing including ridge complete all as specified.

Dismantling of battens for tiles, singles etc, of any size including tiling fillets exc 15 cm complete all as specified.

Dismantling unframed work of timber scantlings 40 sqcm and over in any section, in any position complete all as specified.

M & L for Clean sawn 2 nd class hard wood in scantling as a post and rafter, purlins etc complete all as specified.

S & F for steel work in tubular trusses/MS hollow pipe including special shaped washer etc. complete using ERW or induction butt weided tubes conforming ti I.S 1161-1998 grade St 240 complete all as specified.

Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and as directed.

S & F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping screws as specified incl filling of gaps between wall and sheet with PCC 1:2:4 ( 20 mm graded agg)/ brick work CM 1:4 and plastering the surfaces with CM 1:4 on both side where required cost of the same shall be deemed to be included in quoted rate complete all as specified and directed.

S & F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping screws as specified.

M & L for Preparing surface of wood and wood based materials, new or old, of any descripion and girth, not otherwise described and treated with two coats of creosote complete all as specified.

M & L Two coats of synthetic enamel paint over priming with red oxide over preparation of new iron surfaces of any description over 10 cm width or girth complete all as specified and as directed.

Dismantling of wall and ceiling board(fiblre, pulp, insulation etc) any thickness including cover fillets complete all as specified and as directed.

S & F powder coated aluminum alloy interlocking snap grid 600mm x 600mm consists of Min Tee runners of size 38mm x 38mm x 1.5mm and cross Tee of size 38mm x 38mm x 1.5mm, spaced between the main Tee at 600mm centre to centre to form a grid of 600mm x 600mm complete all as specified and as directed.

M & L for 4mm thick non asbestos fibre cement building boards of make 'E board classic designer board (Cascade or Occenic) of M/S Everest industries Ltd or equivalent as approved, fixed or laid/ inserted to timber/GI/Aluminium framework with complete all as specified and as directed.

M&L of false ceiling in step(s) comprising of 12mm thick Gyp board including GI frame work for seamless ceiling made of GI perimeter channel 0.55mm thick with two unequal flange of 20 to 30 mm and web of 27mm fixed to surrounding wall using nylon sleeves and screw at 450 mm centre to centre intermediate channel 0.9mm thick having two equal flange of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleats and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55 mm thicknesshaving kurledweb of 50mm and flangeof 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre with and including two coats of plastic emulsion paint complete all as directed. Make-India Gypsum/Gyproc/Lafarge.(Note:- The measurement shall be made flat from wall to wall without considering step(s).

Taking down cement mortar plastering on brick or stone walls, etc. including raking out joints,hacking for key,scrubbing down with water, etc complete all as specified and as directed.

M & L for rendering 10 mm thick with ready mix plaster of Brick/stone masonary surface or concrete surfaces complete all as specified and as directed.

M & L for rendering 15 mm thick with ready mix plaster of Brick/stone masonary surface or concrete surfaces complete all as specified and as directed.

M&L for rendering 5mm thick ceiling plaster with ready mix plaster on concrete surfaces, complete all as specified and as directed.

M&L for two coats of cement base paint over chalk whitening newly plastered surfaces of walls including preparation of surfaces all as specified and directed.

M&L preparation of new plastered surface of walls and applying two coats of oil bound distemper over 1.5mm thick wall care putty over one coat of interiour wall primer complete all as spd and directed.

M & L for preparation of new plastered surfaces of walls and applying three coat of white wash complete all as specified and directed.

M&L for Preparation of new plastered surfaces as in ceilings and applying three coats of white wash complete all as specified and as directed.

Demolition of concrete in ground floors & paving not exc 15cm thickness (below or above ground level) complete all as specified.

M&L for 75 mm thick PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) as in plinth protection finished even and fair and laid in alternate bays complete all as specified and directed.

Demolition of brick work or stone/boulder masonary, laid in cement mortar or cement lime mortar complete all as specified and directed.

M&L for Brickwork with fly ash old size bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified and as directed.

S&F framed work such as grills, gratings, etc with ends of bars, shouldered and /or riveted, or forged into spicks, framed guard bars, ladders, framed balusters, walk ways, railings, framework of water tankd and similar work conforming to Fe 410-O all as specified.

M & L for preparation of old distempered surfaces of wall including washing rubbing down and stopping distempered surfaces incl filling of holes cracks with POP putty and applying one coat of oil bound distemper (White or tinted) on walls complete all as specified.

M & L for preparation of old distempered surfaces of wall including washing rubbing down and stopping distempered surfaces incl filling of holes cracks with POP putty and applying two coat of oil bound distemper (White or tinted) on walls complete all as specified.

S&F for 5 to 8 mm thick interlocking PVC hollow wall panelling fixed with self tapping screw of approved colour and design complete all as specified and directed by Engr-in-Charge incl dismantling of old unserviceable board any tyupe .

S&F for 0.50mm thick GI channel sheet of width 35-45mm for wall panelling channel inclusive of fixing on to wall to make level complete all as specified and directed.

M&L for preparation of old painted wood & wood based surfaces of any description, not otherwise described over 10cm width or girth and evenly applying one coat on synthetic enamel paint of any height complete all as specified and as directed.

M&L for preparation of old painted iron and iron based surfaces of any description, not otherwise described over 10cm width or girth and evenly applying one coat on synthetic enamel paint of any height complete all as specified and as directed.

S&F powder coated aluminium sections for doors, windows, partition including fabrication of frame and shutters and fixing with necessary lugs, cleats, rollers, handles, locking arrangement etc. including all accessories such as glazings clips, provn of AC opening and rubber beadings for fixing glass panes in frame complete all as specified by Engr-In- Charge. Note : (i) Glass panes/wire cloth will be measured & paid separately . (ii)The quoted rate shall be inclusive of cost of rubber beading and glazing clips, hinges, handle, aluminium snap on bidding for fixing of glass panes/partical board in frame. However it will be not be weighed and not paid separately. (iii) All other minor details including cost of locking arrangement shall be included in the quoted rate.

M&L for 4.8 mm thick black tinted sheet glass, of any size etc in square in each pane complete all as specified and as directed.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire stapples complete all as specified and as directed. and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) n exc 1.5 sq. m complete all as specified and directed.

Taking down chowkhats or frames (without taking off shutters from the frame) exc 1.5 Sqm and n. exc 4.00 Sqm incl making good all disturbed portion complete all as specified and directed.

S&F powder coated aluminium sliding window, three track shutters with sash bars, locking rails, locking arrangements including necessay joinery cleats, glazing clips, rubber packing, chowkhats aluminium snap beading, screws, suitable handle etc with and including 4.00 mm thick black tinted sheet glass and stainless steel wire loth 0.36mm nominal dia of wire and average width of aperature 1.20mm, size of side rails, top rails , bottom rail 30x10mm and size of three track chowkat frame 90 x 30mm and thickness of aluminium member shall be 1.20mm thick complete all as specified in MES SSR, Part-I clause 10.37 all as specified and as directed.

S&F for powder coated aluminium ventilator shutters, half bottom portion fixed with 4mm thick glass with fixed type shutter and top half portion lower type with 4mm thick frosted glass and outer side fixed with stainless steel wire mesh 0.36mm nominal dia of wire and average width of aperature 1.20mm, including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, necessary aluminium fittings etc complete all as specified and directed.

M & L for providing 12mm thick toughened glass openable door,sliding door, fixed glass and two leaf glass up to 11 feet High ,glass partition (2.1 pvb interlayer bondede between two glass piles using heat and pressure) including SS handle locking arrangement (glass to floor,glass to glass,glass to wall junctions and as directed by Engr-in-charge incl eatching/frosting of glass ,SS jointing clip, fasteners, heavy duty floor spring,SS L type lock and fastener etc locking arrangement complete etc deemed to be included in quoted rates complete all as spd and directed.

S&F in repairs vitreous china rimless single piece WC of Size: 395X710X730 mm, Single Piece WC with UF Soft close Seat cover, Hinges, Fixing Accessories, Accessories Set, and Cistern fittings, VGS WHT 81853S300UF S trap of Jaquar or equivalent in kohlar, grohe and Roca complete all as specified and directed.

M&L for special treatment to floor/wall sunken portion with demolition of PCC with plaster of entire sunken area (bottom & sides upto dado level) including removal of demolished material exc 250m and n exc 500m, prepration of surface by cleaning to remove loose particles, dust, latance etc, replacement of floor trap of size 75 mm bore PVC SWR , and applying 10mm thick plaster in CM (1:4) with WPC liquid Conplast 421,and applying one coat each of Nitoproof 100 priming coat @1Ltr/5Sqm, after the priming coat applying Nitoproof 120 on plastered surfaces @1Ltr/2.5Sqm, filling the sunken floor with PCC (1:5:10) using brick bat and WPC Conplast - 421, rendering again 40mm thick in CM (1:4) mixed with WPC Conplast - 421, area of floor upto 2.50 Sqm complete all as specified and as directed.

M&L for special treatment to floor/wall sunken portion with demolition of PCC with plaster of entire sunken area (bottom & sides upto dado level) including removal of demolished material exc 250m and n exc 500m, prepration of surface by cleaning to remove loose particles, dust, latance etc, replacement of floor trap,of size 75 mm bore PVC SWR and applying 10mm thick plaster in CM (1:4) with WPC liquid Conplast 421,and applying one coat each of Nitoproof 100 priming coat @1Ltr/5Sqm, after the priming coat applying Nitoproof 120 on plastered surfaces @1Ltr/2.5Sqm, filling the sunken floor with PCC (1:5:10) using brick bat and WPC Conplast - 421, rendering again 40mm thick in CM (1:4) mixed with WPC Conplast - 421, area of floor/kitchen upto 0.5 Sqm complete all as specified and as directed.

Providing and fixing factory made single extruded WPC (Wood polymer composite) solid decorative both side flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder, rick husk, wheat husk) and on toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50N/ mm2, modulus of elasticity 850N /MM2 and resistance to spread of flame of Class A category with property of being termite/ bore proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S. screws, all as per direction of Engineer-in-Charge. (Note : Stainless steel butt hinges and necessary SS screws shall be paid separately) .

S & F Aluminium alloy, anodised,sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as spd and directed.

S & F floor door stpper of aluminium alloy body and tongue anodised with hard drawn steel spring 140mm overaii length of cover plate complete all as specified.

S&F for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x100 mm single rebate comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with and incl MS hold fast/ lugs/SS dash fasteners bolt of required dia and length complete as per direction of Engineer-in-Charge. Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made Make : ECHON/Sintex/Rajshree/Navaratan

S&F for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x125 mm double rebate comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with and incl MS hold fast/ lugs/SS dash fasteners bolt of required dia and length complete as per direction of Engineer-in-Charge. Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made Make : ECHON/Sintex/Rajshree/Navaratan

S&F 28-30 mm thick moulded WPC factory made 100% solid door (conforming as per IS-4020) made from 100% lead free single extruded with 2, 4 or 6 raised panel design on the front side with 10 mm deep mould on single side with wood grain texture and back side palin with density not less than 600 Kg/cum. Manufactured by an ISO : 9001-2015 certified company. The door should be water proof, termite proof, fire etardant and having screw holding capacity complete all as specified

S&F 100 mm long butt hinges stainless steel complete fixed with full body threaded Star headed counter sunk SS screws all as specified and as directed.

S & F Aluminium handles, cast type, anodised handle 150 mm complete all as specified.

S & F Aluminium handles, cast type, anodised handle 100 mm complete all as specified.

S & F Aluminium, anodised, barrel tower bolts, of extruded section and fixed 150 mm complete all as specified.

Taking down shutters of any description exc 1 sq.m and n.exc 2 sq.m each store complete all as specified and as directed.

M&L for cement concrete (1:4:8) type D2 using 40mm graded stone aggregate in foundations, filling and mass concrete complete all as specified and as directed.

Taking down carefully existing unserviceable bitumen felt (any number of layers) including plaster of any thickness, wire brushing and cleaning of the surface of roof terraces including flashing and junctions of parapets kerb wall,PCC fillets,benching etc and removing of the rubbish to a distance not exceeding 500 mtr from the building and depositing where complete all as specified and directed.

M&L for rendering 10mm thick CM (1:4) on roof slab top and sides finished even and smooth without using extra cement, mixed with water proofing liquid complete all as specified.

M &L for plain cement concrete 1:2:4 type B-1 (using 12.5 mm graded stone aggregate) Finishing cement concrete surface even and smooth using extra cement for filleting, benching,coving of chajjah top/junctions,padding concrete below roof treatment etc slightly rounded or chamfered on edges wherever required including necessary form work / moulds etc complete all as specified and as directed .

M&L for cleaning the newly plastered surfaces of concrete (roof etc) with wire brushes and applying water proofing treatment as under :- i) Apply one coat of oil bound bituminous primer @ 0.70 kg/Sqm. ii) Providing and laying 3mm thick APP modified water proofing membrane weighing not less than 3.60 Kg/Sqm reinforced with non woven polyester mat weighing not less than 160 gm/Sqm all as specified procured from any one of the approved manufacturer's. iii) Apply one coat of solar reflective bituminous aluminium paint @ 0.15 Kg/Sqm over membrane over non assesible roof surfaces complete all as per manufacturer's instructions and as directed .

S&F factory made 100 % solid wood plastic composite (WPC) flush type shutter/shelf/ of 18 mm thickness one side laminate consisting of panel of PVC profile of 18mm (+ 0.7mm) thick of denisity 600 kg per cum manufactured by ISO-9000 certified company using for shutter cillicia ply 18mm thick and fixed as in cupboard/shelf/kitchen shelf etc . The thickness of shutter is edges painted by matching colour of PVC lining of prelim coloured PVC sheet using etc incl dismantling/taking out old unsv board any type and fixed in any position complete as per manufacture specification.Make : ECHON/Sintex/Rajshree/Navratan

S&F factory made 100 % solid wood plastic composite (WPC) flush type shutter/shelf/ of 18 mm thickness both side plain consisting of panel of PVC profile of 18mm (+ 0.7mm) thick of denisity 600 kg per cum manufactured by ISO-9000 certified company using for shutter cillicia ply 18mm thick and fixed as in cupboard/shelf/kitchen shelf etc . The thickness of shutter is edges painted by matching colour of PVC lining of plain coloured PVC sheet using etc incl dismantling/taking out old unsv board any type and fixed in any position complete as per manufacture specification.Make : ECHON/Sintex/Rajshree/Navratan

S&F Stainless steel Z type hinges 100 mm long medium weight fixed with SS star headed screw complete all as spd and directed as in Kitchen cabinet cupboard shutters all as spd and directed.

S & F double action floor spring hydraulically regulated made up of aluminium alloy sheet foundation box main body with stainless steel cover governing pivot made of brass other parts made of mild steel heavy duty complete all as spd and and directed.

S & F in repair Door closer hydraulically regulated aluminium die cast body universal type suitable for 851 to 1000 mm in width and weight between 61 to 80 kg complete all as spd and directed.

S & F 30 mm continious ( piano) width of flap ( when open), hinges stainless steel complete all as spd and directed.

S&F 2nd class H.W. glazed & skeleton shutter 35mm thick factory made open rebated & prepared to receive glass gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass,gauge etc size of members of shutter as specified in SSR part-I , section 8, clause 8.24 (a) complete all as specified and as directed.

S & F 125 mm long Hasp and staple safety type aluminium anodised with mildv steel hinge pin incl bolt to hinge plate and fixed with SS star screwe complete all as spd and directed.

M&L for preparation of new wood & wood based surfaces of any description, not otherwise described over 10cm width or girth and evenly applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

M & L for rolled mild steel work angle iron as in door frame (Chowkhats) confirming to Fe-290 or Fe-330 including preparing back of chowkhat and applying two coats tar and sanding newly tarred surfaces with clean sharp sand complete all as specified and directed.

M&L for Prelaminated particle board of 9mm thick, interior grade prelaminated both sides with decorative choice laminations with teak wood leaping fixed with screws as in cupboard shutters, bed room, kitchen, aluminium partition and internal shelves complete all as specified.

S&F Plain, solid, straight chowkhats and frames of 2nd class Hard Wood wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed all as specified and as directed.

Dismantling of PVC Pipes with fittings upto 75mm to 110mm dia complete all as specified and as directed.

S&F for 110mm bore of PVC (SWR) pipes single socketed in any length with rubber ring joints laid on wall complete all as specified and as directed.

All as per item No 132 but except pipe complete all as specified and directed.

S&F for 75mm bore of PVC (SWR) pipes single socketed in any length with rubber ring joints laid on wall complete all as specified and as directed.

All as per item No 134 but except pipe complete all as specified and directed

S&F PVC (SWR) bend any radius 110mm complete all as specified and directed.

S&F PVC (SWR) bend any radius 75mm complete all as specified and directed.

S&F for 110mm bore PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and directed.

S&F for 75mm bore PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and directed.

S&F auto closing hinges 35 mm of 0 crank( KH-001) OR 8 crank (KH-002) openable at 110 degree for kitchen cabinet shutters Make :Hexa, Hettich, Hafele

S&F Ball bearing runners 45 mm Telescopic channel (KTS-20) full extension load capacity 50 kgs, Make :Hexa, Hettich, Hafele

M&L for non abrasive paving (Rectified Endura) cement conrete coloured tiles 8-10mm thick area of each tile exc 0.11 sqm but n exc 0.18 sqm machine pressed, set and jointed and pointed in neat cement slurry as in floor/skirting mixed with grey cement and pigment match the colour as in pavements, including 15mm thick scred in CM 1:6, set jointed & pointed in neat cement slurry in floors complete all as specified and as directed.

S&F in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire stapples complete all as specified and as directed. and directed.

M&L for complete removal of existing treatment from walls/fins/facia/RCC surfaces of any description with mechanical means and preparation of old decorated plastered or unplaster surfaces of walls/fins/facia and applying two coats of exterior emulsion paint of any colour/shade @ 4.65 sq.m/litre/2 coats by using roller over a coat of exteriour primer on external walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc surfaces including filling of cracks/holes by crack filler complete of any height complete all as specified and directed.

M&L for preparation of old decorated plastered or unplaster surfaces of walls of existing treatment and applying one coat of exterior emulsion paint @ 9.30 sq.m/litre by using roller to prepared external walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc surfaces including filling of cracks/holes by crack filler complete all as specified and directed.

S&F 18 mm thick Plywood BWR type BB, fixed with screws to timber frame work on wall all as specified and directed.

M&L for decorative laminate type I,of surface finish ,colour and pattern as approved fixed with approved adhesive as per maker's instruction, 0.9mm thick laminate

S & F extruded Brass handles, fabricated type polished 150 mm long complete all as specified.

S & F brass , barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed 200 mm complete all as specified.

S & F Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed 250mm complete all as specified.

S & F floor door stpper of brass , body and tongue with hard drawn steel spring 140mm overaii length of cover plate complete all as specified.

S&F in repair 25mm dia 1 to 1.5mm thick stainless steel curtain rod with fancy type incl brackets, stops, rollers, sides knobs /glove funnel etc. complete all as specified and directed by Engr-in-charge.

S&F for 30mm thick flush shutter, solid core construction, with particle board core and plywood face panels, commercial type on both faces including teak wood beading 6mm thick all around complete all as specified and as directed.

M&L for complete removal of existing treatment of walls with mechanical means/grinders etc and applying two coat of cement based wall putty (JK/Birala wall care putty) to make surface smooth including rubbing and sanding with sand paper and appling one coat of interioe primer over two coats of distempering with distemper oil emulison (any tint) complete all as specefied and directed.

S&F in repair sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes coupling including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm, complete all as specified and directed.

S&F in repair sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs,washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm complete all as spd and directed.

S & F stainless steel L button for kitchen cabinet and cup board shelf and fixed with SS star headed screw complete all as spd and directed.

M & L for fabrication & fixing to horizontal & vertical shelves/ partations /sides/ top/ bottom/back sides etc for Modular kitchen cabinate/ wardrobe/ cupboard/drawers made out of 17/18 mm thick HDHMR boards (Water/termite proof) with white laminated colour on both sides, of approved quality including paste to all exposed edge by edge Banding Tape including provision of cabinet for keeping baskets/ drawers etc and including taking down existing shutter/panel/partition and all other accessories in any type and any position complete all as specified and as directed. (Make :Action tesa/kitply or Archid)

M & L for Fabrication & fixing to front side /all exposed sides of Modular kitchen cabinate/ wardrobe/ cupboard/drawers made out of 17/18 mm thick HDHMR UV, glossy/maat finish boards front side and other side white UV boards edges duly bonded with PVC taping to match the colour of UV boards all around including provision of cabinet for keeping baskets/ drawers etc and including taking down existing shutter/panel/partition and all other accessories in any type and any position complete all as specified and as directed. (Make :Action tesa/kitply or Archid)

S & F 25mm dia (internal dia) CPVC pipes with all fittings SDR 11 & Plain CPVC SDR 11 fixed to walls and ceilings with adequate nos of clamps or laid in floors including cutting chases in stone,concrete block or slab wall pinning in making good to facing where ever required to the sufraces for concelled water supply including CPVC brass fitting such as elbow, socket, nipple required for fixing of plumbing items complete all as specified and as directed. (Note : No extra payment shall be made for cutting chases & CPVC fittings)

Note: Amount of sch of credit of Rs.111010/-will be deducted from total amount of BOQ.

M/s M R MAHANA (BID ID -3446954)

Alpha Construction (BID ID -3446455)

Rehoboth Buildcon (BID ID -3446454)

J Sams Contructions (BID ID -3445079)

M/S SAMEER SUBHASH PATANI (BID ID -3452701)

M/S R.K.S. CONSTRUCTION (BID ID -3452688)