Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹36.2 LAccepted-Finance | L1 | Accepted-Finance L1 | |
| 2 | L2₹44.4 L+₹8.2 L (22.8%)Rejected-Finance | L2 | Rejected-Finance L2 |
Tender Value
₹45.5 L
EMD Value
₹90,911
Closing Date
15 Feb 2024, 11:00 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
The Registrar
Works and Estate Section, IIT Ropar
Providing and fixing of interior fit out works at TBIF of IIT Ropar
2024_IITRP_793043_1
IIRPR/EE/T/24/292
Open Tender
Civil Works
Item Rate
90 days
IIT Ropar
Please refer Tender documents.
2 documents required · 2 mandatory
₹1,180
Payable To IIT Ropar Revenue Account
₹90,911
12 Apr 2024
1 Feb 2024
16 Feb 2024
1 Feb 2024
15 Feb 2024
1 Feb 2024
1 Feb 2024 - 7 Feb 2024
TRIANGULAR PLY PANELING over column and table , made in wooden ply framework with 18mm ply over wooden/ ply framework. Measurement to be done for area of Exposed Surface of PLY (Area of planes A to N). No extra payment for framing to be made. All Planes named A to N as marked in Drawing No. I-107 ,F-113 to be referred to for details. Laminate to be paid separately. Compile work to be executed as per methodology in 1.02
Production of fabrication drawings for item no. 1.01 and seeking approval and execution methodology.
Supply and Installation of Factory Made Modular pantry as per drawings. The item includes cost of material delivered at site, installation, any and all accessories but not limited to soft close hardware, SS screws, all tools and tackles, for all leads, lifts and levels, provision of shop drawings, etc. all complete. as per directions of Engineer-in-charge. Carcass : 18mm pre-laminated HDHMR edge banded Shutters & Visible Panels : HDHMR 18mm finished in PVC Membrane 0.3 - 0.4 mm (as per approved shade) or Laminate Finish (edge-banded) Hardware : As per approved make Skirting : PVC Black Matte Under Counter Size - Depth 600 mm Undercounter Board: 18mm PVC Board Working Counter Height: 910 mm Worktop thickness with nosing: 40mm Carcass Finish Light Grey/caspani (As per approval) Undercounter Depth : 600 mm Overhead Cabinets Depth : 340 mm Laminate : Decorative textured laminate. Handleless shutters with Black Matte finished 'J' profile As per Drawing No. I-104. Rates inclusive of Shop Drawings to be Prepared by Vendor and Approved by Engineer-In-Charge. Items included: Undercounter cabinets, Overhead Storages & Open shelves (if any) Items excluded: Counter-Top Stone works, Lighting/ Electrical works, Backsplash tiling, Parition Framing, Ply Panelling and Finishing in Laminate to be paid separately.
60mm wide edge detail made of Edge banding and HDF(HDMR) with duco finish as per design. Paint cost will be extra as per details. (Refer Dwg I-103 c, Detail-X)
Providing and fixing of frameless partition consisting of 12mm clear toughened glass of approved make and fixing with WCP channel on top and bottom of glass and all the necessary fittings upto all height including silicon filling (in Glass to Glass joints and wherever required) complete job in all respects and as per the direction of Engineer-in-charge.
Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing requried door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc. to be paid separately)
glass door hardware as per approved make)
Patch Lock
Providing & Fixing GI metal framework for Panelling/ Parition with grid of not larger than 600mm x 600 mm. All inclusive to make the panelling structurally sound. Rate shall be also inclusive of additional members to be provided at the junction of skirting / cut outs etc. All complete as per instruction of Engineer In-charge
Steel work in built up tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. :
Hot finished welded type tubes.
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.
Welding by gas or electric plant including transportation of plant at site etc. complete
Providing and fixing steel levelling sctrews of appropriate strength below furniture/ and or whereever specified. Fixed in Ms. Or wood with requisite hardware/screws etc. (M 10 x 15)
Providing and fixing BWP grade plywood with ISI mark of make Greenply / century / or equivalent used for panelling above framework cutting and fixing in necessary shapes with all the required hardware (nail, screws etc.)
8 mm Ply
12 mm Ply
Extra for creating Access Panels of size mentioned in drawings in Ply Panelling using same material (Ply + Laminate as specified) and finish using Head-capped screws
Providing and fixing of Water resistant HDF (HDHMR) board of density 850kg/m3 of Action tesa make or equivalent for panelling above any surface fixed with screws/ nails or adhesive:
Providing and fixing of cement board of approved make for panelling above aluminium framework/ wooden framework/ wall fixed using screws or proper joining mechanism:
PU Solid paint (of approved shade)
PU Solid Paint (over Metal)
Providing and finishing of texture paint of approved make & shade as required complete in all respect.
Providing three or more finishing coats of Plastic Emulsion paint on wall & ceiling of approved make & shade as required complete in all respect .
Providing and application of textured laminate of approved make pasted above Ply/ any smooth surface as specified. Groove pattern to be approved by E-in-C. Assume 30% wastage for areas, where laminate is pasted on triangular planes, or diagonal grooves are proposed in Ribbon Structure.
1.0 mm textured laminate
1.0 mm Decorative Laminate
0.8 mm laminate
Flooring work
Dismantling of existing Tile Floor . All inclusive (debris disposal , cleaning , etc). Including disposal of the debris off the campus.
Dismantling of existing tile Skirting. All inclusive (debris disposal , cleaning , etc). Including disposal of the debris off the campus.
Laying of new Tile Floor in 600mm x 600 mm polished vitrified tile of same shade as per exisiting tiles laid in the similar pattern. Including base preparation of required.
Dismantling / cutting / repairing / reinstalling new tiles to make provision for electrical/plumbing/civil work including skirting complete as per the direction of Engineer-in- Charge. Complete in all respects, measured in running length.Including disposal of the debris off the campus.
Dismantling of exisiting partition, column panelling, as and where specified in the drawings and/or as per the direction of Engineer-in- Charge. Including disposal of the debris off the campus.
False Ceiling Work
Providing and Fixing New False Ceiling Mineral Fibre 595 x 595 mm Tiles in the existing Grid Ceiling wherever the existing tile/ tiles have been damaged or emptied (measured in SQM, Only Tiles to be provided and fixed). Including disposal of the debris off the campus.
For making provision of New points (Electrical, FF, Plumbing, ceiling supports, etc.) in GRID Ceiling including cutting, finishing etc. (measured in per point basis)
For making provision of New points (Electrical, FF, Plumbing, ceiling supports, etc.) in Gypsum Board Ceiling including cutting, finishing etc. (measured in per point basis)
Repairing of gysum board false ceiling with New gypsum Board wherever required as per the drawings. Complete in all respects. Including disposal of debris off the campus.
Gypsum Board False Ceiling with 12.5 mm thick tapered edge gypsum board conforming to IS: 2095 - part I.
Plumbing & Firefighting Works
Providing and laying of waste water drain point with PVC pipes (of approved make and specifications to connect with existing waste water drain line) as per the direction of Engineer-in- Charge as per the location given in the drawings. (Refer Drawing No. A-101a for sink provisioning) (Per point basis)
Providing and laying of water Supply lines with CPVC pipes (of approved make and specifications to connect with existing water supply line) as per the direction of Engineer-in- Charge as per the location given in the drawings. (Refer Drawing No. A-101a for sink provisioning) (Per point basis):
Electrical Works
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required.
For Lighting Circuit/ Sub Main Wiring
3 x 1.5 sqmm
3 x 2.5 sqmm
3 x 4.0 sqmm
Supplying and fixing of following sizes of conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required, including required junction-boxes
25mm dia Steel Conduit
25 mm dia PVC Conduit
Supplying and fixing suitable size GI box in fornt on surface or in recess (12 module)
Providing and Fixing (making connections) Modular Siwtches and Sockets, alongwith their respective Switch Plates and Covers, as per desired shade and size
3 pin 5/6 A modular socket
5/6 A modular switch (For Sockets and Light Points)
3 pin 15/16 A modular socket
15/16 A modular switch
Fan Regulators
Supply & fixing of following size (GI RACEWAY Fabricated from 1.6 mm thick GI Sheet) race ways for electrical & LV wiring including Fixing Bracket, Coupler, neoprene gasket in joints, bends, sockets cutting the floor & jaming the race way/ hanging in ceiling, supporting arrangement as approved by consultant/ architect with all necessary hard ware (including civil work) as per site requirement. The thickness of raceway & cover shall be as per technical specification.
150 mm wide x 38 mm deep. (1 Compartment)
300 mm wide x 38 mm deep. (3 Compartments)
Providing & Fixing after making neccessary fixing provisions of metal concealed switch boxes with metal flap fitted with brush for wires access on worktop surface. Model no. DeskPort 154 Manual (8 Module), Make: Innofitt Or any equivalent model of equivalent make.
Supplying and drawing of UTP 4 pair CAT 6 LAN cable in the existing surface/ recessed Steel/ PVC conduit as required.
Supply and installation of plug -in type data socket RJ-45 Connector outlet along with modular base and cover plate as per desired layout, color and Size of plate
Providing and fixing of all light fixtures
Supply of 12W +/-1W Deep Inset COB LED Reccess Mounted Downlighter having minimum system lumen efficacy of 90 lm/W with minimum system lumen output of 1080 lumens with Pressure Die cast aluminium housing with White Finish Trim and High transmittivity diffuser with chrome Finish reflector with deep inset White and silver bezel having P.F.>0.95 with THD<10% ,CCT 4000K ,CRI 80.The LED Fixture have minimum life of 50000 Hrs at L70.The Input voltage range shall be 100V to 265V with surge protection 2.5KV.
Liner Profile Recessed
Aluminium Linear Profile for Recess Mounting for 8mm LED Strip Lights, Internal width 11mm (Ref. Profile 1103, Model No. 833.95.722. Make Hafele or equivalent)
Strip to Driver Connector ribbon 8mm /24V/2.0m (Ref. Model No. 833.75.705. Make: Hafele or equivalent)
Flexible Strip Lights, monochrome constant current, 8mm 24V/19.2W/m 40K/CRI90/5m(Ref. Model No. 833.75.252. Make: Hafele or equivalent)
24V, 0-90W, Constant Voltage Driver, Loox (Ref. Model No. 833.77.949. Make Hafele or equivalent)
2 Pin EU open end Primary cable black 2000mm (Ref. Model No. 833.89.009. Make Hafele or equivalent)
Suspended Linear Light
Supply of Linear 8 Feet LED Fixture 40 W+/- 1W Suspended mounted having Extruded Aluminium housing with HET diffuser with minimum system lumen efficacy of 115 lm/W and minimum system lumen output of 4600 lumens, P.F.>0.95 withTHD<10% ,CCT 4000 K, CRI 80.The LED with Useful life of 50000Hrs at L70. The Input voltage range shall be 140V to 300V .Fixture have Surge Protection 3kV .
Surface Magnetic Track Light
Supply of 12W +/-1W Magneto Linear Collimator Track Mounted with system lumen efficacy of 85 lm/W with Black housing with Beam angle of 36 degree having P.F.>0.95 with THD<10% ,CCT 3000K/4000K ,CRI 80s.The LED life of 50000 Hrs at L70.The Input voltage range shall be 150V to 270V.
2 mtr Magnetic Track for Magneto Linear Collimator.
90 Degree Horizontal Connector for Magnetic Track
Relocation of fans with all complete accessories
Providing and fixing Oriental Wall Fans, hi- speed 44, sweep=400mmm and white body colour.
Site Fabricated GI Duct
24 gauge GI Sheet Ducting
XLPE/Nitrile Insulation in Ducting
Supply and Installation of Duct Acoustic Lining
Supply and Installation of Aluminium Grills/Diffuser
Supply and Installation of Volume control Dampers
Providing and Laying Carpet Tiles as per specs. Tufted High & Low loop, Face Yarn - 100% Solution Dyed Universal Nylon 6, Gauge - 1/10 Inch, Stitches - 11 Per Inch, Total Thickness - 7.5 mm (±0.5 mm), Pile Weight - 580 g/m2 (17 oz/yd2), Backing - E-Bac/PVC back, Tile Size - 50cm x 50cm/100cmx25cm
Providing , laying , finishing / chamfering of Wall/floor Tiles. 10 mm thick tiles of approved make and colour , pasted with adhesive above Ply/ Cement Board / wall and joints filled with acid and/or alkali resisting cement as per IS : 4457 or epoxy, complete as per the direction of Engineer-in- Charge.
Ceramic Tiles 300 x 600 mm
Vitrified Tiles 600 x 600 mm
Providing and fixing, including chamfering & polishing of edges of Steel Grey 18mm thick granite including molding of approved shade over ply/cement board/ and other surface with epoxy resin based adhesive including cleaning etc. complete.
Supplying, providing, fixing with silicon toughened lacquered glass of approved shade on Ply surface. The cost is inclusive of necessary hardware. The item includes sealing of edges & joints with silicon sealant The works shall be completed in line and at any level to the satisfaction of Engineer-in-charge
Supplying,providing, fixing on studs toughened glass on vertical surface. The cost is inclusive of necessary hardware. The item includes cost of cutting/ holes etc. The works shall be completed in line and at any level to the satisfaction of Engineer-in-charge
Table made in 18mm ply with 1.2mm thk laminate finished on all exposed surfaces and 1mm laminate finish inside with 12mm thick wooden bending with soft close hafele / hettich fittings as per design. (Refer Dwg F-113 for details)
Seating made in MS structure of 25X50mm of 38 x 50mm pinewood slats @50mm c/c on top with clear PU paint finish. (Refer Dwg F-103 for details)
Planters made in MS structure of 25x50mm with 12mm thick cement board at base and 8mm thick cement board filling covering MS structure and wooden member in top edge with square groove (4x4mm) detail as per design including FRP lining inside the planters and removable water tray underneath and archi concrete (textured paint) on outer surface of cement board. Mode of measurment will be in running length. (Refer Dwg F-103 for details)
Made in 18mm ply with 1.2mm thk laminate finished on all exposed surfaces and 1mm laminate finish inside and 50mm solid wooden skirting with soft close hafele / hettich fittings as per design. Factory fabricated / edge band sides. (Refer Dwg F-105 for details)
E-VERVE DESIGN
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .