Design, Fabrication and Installation of new gates, replacement of winch machines, connected parts at Gates At Kathar Minor Of D16 Distributory, Escape Channel D15 Of Mrc Near Ditch and other locations on Main Ranbir Canal and its Distributaries along

Design, Fabrication and Installation of new gates, replacement of winch machines, connected parts at Gates At Kathar Minor Of D16 Distributory, Escape Channel D15 Of Mrc Near Ditch and other locations on Main Ranbir Canal and its Distributaries along with allied works.

Cross Gate no 1(45 inches x 36 inches) :-Fabrication of head gate on distributary D 16 canal to stop the water towards Kaku de Kothey. Fabrication of leaf structure of size 45 inch x 36 inches(approx) using the ISMC 75 channel size with vertical &horizontal cross members for support by way of cutting as per required size and then welding using superior quality electrodes. The leaf is to be fabricated with 3 number horizontal supports and 3 number vertical supports at equidistance from each other. The supports should be fabricated out of ISMC 75 channel.Providing and welding the MS sheet of 5mm thickness on the frame of fabricated from MSchannel. Fabrication of L shaped clamps attaching stem rod attachment during up and downward moment of gate. Fabrication and fitting of 1 no. stem rod from MS bar and then turning, threading, finishing to the original size.Fabrication, providing & fitting of 03 Ton capacity manually operated, worm gear type winch machine along with base plate of 5 mm thickness. Oiling and greasing the gear and bearings mechanism before fitting. Providing and fitting of rain pipe over the winch machine to secure the stem rod and machinery. Loading the gate structure along with winch machine on the mechanical transport for carrying to site of installation. Unloading the gate structure at road side then shifting to the site of installation. Fabrication of outer structure of the gate by cutting MS channels ISMC 100 using gas cutting and welding to form the frame. Providing, fitting and welding of 2 lengths of ISMC 100 channels over the canal to support the winch machine. The channel should be welded and grouted over and inside the groves fabricated in the civil structure. The height for installation of winch machine should be about 6 ft from bottom for easy operation and maintenance of the gates. The job includes required civil work for installation and grouting of frame on the structure with M15 grade concrete. Installation of gate structure by way of lowering the leaf structure into the sliding grooves using skilled manual labour using crane. Drilling requisite no. of holes in hoisting channels at site. Fitting of winch machine on the supporting channel and connecting the stem rod to the leaf structure after ensuring the proper alignment/gravity of the gate structure. Complete painting of gate structure with one coat of red oxide primer and superior quality enamel paint ( Asian paints/ Kansai Nerolac paints/ Berger paints). Gate no 2 ( 45 inches x 36 inches) :-Fabrication of escape gate on distributary D 16 canal to divert water in defense ditch located at Pindi Kathar . Fabrication of leaf structure of size 45 inch x 36 inches (approx) using the ISMC 75 channel size with vertical &horizontal cross members for support by way of cutting as per required size and then welding using superior quality electrodes. The leaf is to be fabricated with 3 number horizontal supports and 3 number vertical supports at equidistance from each other. The supports should be fabricated out of ISMC 75 channel. Providing and welding the MS sheet of 5mm thickness on the frame of fabricated from MS channel Fabrication of L shaped clamps attaching stem rod attachment during up and downward moment of gate. Fabrication and fitting of 1 no. stem rod from MS bar and then turning, threading, finishing to the original size.Fabrication, providing & fitting of 03 Ton capacity manually operated, worm gear type winch machine along with base plate of 5 mm thickness. Oiling and greasing the gear and bearings mechanism before fitting. Providing and fitting of rain pipe over the winch machine to secure the stem rod and machinery. Loading the gate structure along with winch machine on the mechanical transport for carrying to site of installation. Unloading the gate structure at road side then shifting to the site of installation. Fabrication of outer structure of the gate by cutting MS channels ISMC 100 using gas cutting. Providing, fitting and welding of 2 lengths of ISMC 100 channels over the canal to support the winch machine. The channel should be welded and grouted over and inside the groves fabricated in the civil structure. The height for installation of winch machine should be about 6 ft from bottom for easy operation and maintenance of the gates. The job includes required civil work for installation and grouting of frame on the structure with M15 grade concrete. Installation of gate structure by way of lowering the leaf structure into the sliding grooves using skilled manual labour using crane. Drilling requisite no. of holes in hoisting channels at site. Fitting of winch machine on the supporting channel and connecting the stem rod to the leaf structure after ensuring the proper alignment/gravity of the gate structure. Complete painting of gate structure with one coat of red oxide primer and superior quality enamel paint ( Asian paints/ Kansai Nerolac paints/ Berger paints). Gate no 3 ( 45 inches x 36 inches) :- Fabrication of escape gate on distributary of D 16 canal to divert water towards the other side in defense ditch located at Pindi Kathar. . Fabrication of leaf structure of size 45 inch x 36 inches (approx) using the ISMC 75 channel size with vertical & horizontal cross members for support by way of cutting as per required size and then welding using superior quality electrodes. The leaf is to be fabricated with 3 number horizontal supports and 3 number vertical supports at equidistance from each other. The supports should be fabricated out of ISMC 75 channel. Providing and welding the MS sheet of 5mm thickness on the frame of fabricated from MS channel. Fabrication of L shaped clamps attaching stem rod attachment during up and downward moment of gate. Fabrication and fitting of 1 no. stem rod from MS bar and then turning, threading, finishing to the original size.Fabrication, providing & fitting of 03 Ton capacity manually operated, worm gear type winch machine along with base plate of 5 mm thickness. Oiling and greasing the gear and bearings mechanism before fitting. Providing and fitting of rain pipe over the winch machine to secure the stem rod and machinery. Loading the gate structure along with winch machine on the mechanical transport for carrying to site of installation. Unloading the gate structure at road side then shifting to the site of installation. Fabrication of outer structure of the gate by cutting MS channels ISMC 100 using gas cutting. Providing, fitting and welding of 2 lengths of ISMC 100 channels over the canal to support the winch machine. The channel should be welded and grouted over and inside the groves fabricated in the civil structure. The height for installation of winch machine should be about 6 ft from bottom for easy operation and maintenance of the gates. The job includes required civil work for installation and grouting of frame on the structure with M15 grade concrete. Installation of gate structure by way of lowering the leaf structure into the sliding grooves using skilled manual labour using crane. Drilling requisite no. of holes in hoisting channels at site. Fitting of winch machine on the supporting channel and connecting the stem rod to the leaf structure after ensuring the proper alignment/gravity of the gate structure. Complete painting of gate structure with one coat of red oxide primer and superior quality enamel paint (Asian paints/ Kansai Nerolac paints/ Berger paints). Complete job includes cost of material, transportation, labour, crane, DG set for welding works at site and testing for its smooth operation at site. Note: - The tenderers are requested to visit the site and quote the rate as per site conditions. Any modifications/ alterations of the job, absolutely necessary if required at the time of execution may be done as per actual site conditions. The size of gate and outer frame can vary by +- 10 percent as per the civil structure and site conditions.

Gate no 4( 26 inches x 24 inches) :- Fabrication of gate on distributary D 14 of MRC after extracting out the damaged frame and winch machine. Fabrication and fitting of 1 no. stem rod from MS bar and then turning, threading, finishing to the original size .Fabrication, providing & fitting of 03 Ton capacity manually operated, worm gear type winch machine along with base plate of 5 mm thickness. Oiling and greasing the gear and bearings mechanism before fitting. Providing and fitting of rain pipe over the winch machine to secure the stem rod and machinery. Fabrication of outer structure of the gate by cutting MS channels ISMC 75 using gas cutting. Providing, fitting and welding of 2 lengths of ISMC 100 channels over the canal to support the winch machine. The channel should be welded and grouted over and inside the groves fabricated in the civil structure. Loading the gate structure along with winch machine on the mechanical transport for carrying to site of installation. Unloading the gate structure at road side then shifting to the site of installation. The height for installation of winch machine should be about 6 ft from bottom for easy operation and maintenance of the gates. The job includes required civil work for installation and grouting of frame on the structure with M15 grade concrete. Installation of gate structure by way of lowering the leaf structure into the sliding grooves using skilled manual labour using crane after extracting out the old frame structure ,supports and winch machine. Drilling requisite no. of holes in hoisting channels at site. Fitting of the new winch machine on the supporting channel and connecting the stem rod to the leaf structure after ensuring the proper alignment/gravity of the gate structure.The job includes rebate on old frame ,supports and winch machine .Then complete painting of gate structure with one coat of red oxide primer and superior quality enamel paint (Asian paints/ Kansai Nerolac paints/ Berger paints). Gate no 5( 22 inches x 18 inches) :- Fabrication of gate on distributary D 14 of MRC by proper cleaning of grooves for frame of the gate Fabrication of leaf structure of size 22 inch x 18 (approx) using the angle 45x45x5 size with vertical &horizontal cross members for support by way of cutting as per required size and then welding using superior quality electrodes. The leaf is to be fabricated with 3 number horizontal supports and 3 number vertical supports at equidistance from each other. The supports should be fabricated out of the angle 45x45x5 . Providing and welding the MS sheet of 5mm thickness on the frame of fabricated from MS angle. Fabrication and fitting of 1 no. stem rod from MS bar and then turning, threading, finishing to the original size. Fabrication, providing & fitting of 03 Ton capacity manually operated, worm gear type winch machine along with base plate of 5 mm thickness. Oiling and greasing the gear and bearings mechanism before fitting. Providing and fitting of rain pipe over the winch machine to secure the stem rod and machinery. Fabrication of outer structure of the gate by cutting MS channels ISMC 75 using gas cutting. Providing, fitting and welding of 2 lengths of ISMC 100 channels over the canal to support the winch machine. Loading the gate structure along with winch machine on the mechanical transport for carrying to site of installation. Unloading the gate structure at road side then shifting to the site of installation. The channel should be welded and grouted over and inside the groves fabricated in the civil structure. The height for installation of winch machine should be about 6 ft from bottom for easy operation and maintenance of the gates. The job includes required civil work for installation and grouting of frame on the structure with M15 grade concrete. Installation of gate structure by way of lowering the leaf structure into the sliding grooves using skilled manual labour using crane. Drilling requisite no. of holes in hoisting channels at site. Fitting of winch machine on the supporting channel and connecting the stem rod to the leaf structure after ensuring the proper alignment/gravity of the gate structure. Complete painting of gate structure with one coat of red oxide primer and superior quality enamel paint (Asian paints/ Kansai Nerolac paints/ Berger paints). Gate no 6( 57 inches x 30 inches) :- Fabrication of escape gate on distributary D 14 canal to divert water towards Beaspur Parlah at Moolachak. Fabrication of leaf structure of size 57 inch x 30(approx) using the ISMC 75 channel size with vertical &horizontal cross members for support by way of cutting as per required size and then welding using superior quality electrodes. The leaf is to be fabricated with 3 number horizontal supports and 3 number vertical supports at equidistance from each other. The supports should be fabricated out of ISMC 75 channel. Providing and welding the MS sheet of 5mm thickness on the frame of fabricated from MS channel Fabrication of L shaped clamps attaching stem rod attachment during up and downward moment of gate. Fabrication and fitting of 1 no. stem rod from MS bar and then turning, threading, finishing to the original size.Fabrication, providing & fitting of 03 Ton capacity manually operated, worm gear type winch machine along with base plate of 5 mm thickness. Oiling and greasing the gear and bearings mechanism before fitting. Providing and fitting of rain pipe over the winch machine to secure the stem rod and machinery. Loading the gate structure along with winch machine on the mechanical transport for carrying to site of installation. Unloading the gate structure at road side then shifting to the site of installation. Fabrication of outer structure of the gate by cutting MS channels ISMC 100 using gas cutting. Providing, fitting and welding of 2 lengths of ISMC 100 channels over the canal to support the winch machine. The channel should be welded and grouted over and inside the groves fabricated in the civil structure. The height for installation of winch machine should be about 6 ft from bottom for easy operation and maintenance of the gates. The job includes required civil work for installation and grouting of frame on the structure with M15 grade concrete. Installation of gate structure by way of lowering the leaf structure into the sliding grooves using skilled manual labour using crane. Drilling requisite no. of holes in hoisting channels at site. Fitting of winch machine on the supporting channel and connecting the stem rod to the leaf structure after ensuring the proper alignment/gravity of the gate structure. The job includes rebate on old frame structure ,leaf and winch machine .Then complete painting of gate structure with one coat of red oxide primer and superior quality enamel paint ( Asian paints/ Kansai Nerolac paints/ Berger paints). Gate no 7( 42 inches x 36 inches) :- Fabrication of escape gate on distributary D10 Tanda branch to divert water at MusaChak towards Chakroi. Fabrication of leaf structure of size 42 inch x 36(approx) ISMC 75 with vertical &horizontal cross members for support by way of cutting as per required size and then welding using superior quality electrodes. The leaf is to be fabricated with 3 number horizontal supports and 3 number vertical supports at equidistance from each other. The supports should be fabricated out of ISMC75 . Providing and welding the MS sheet of 5mm thickness on the frame of fabricated from MS channel Fabrication of L shaped clamps attaching stem rod attachment during up and downward moment of gate. Fabrication and fitting of 1 no. stem rod from MS bar and then turning, threading, finishing to the original size.Fabrication, providing & fitting of 03 Ton capacity manually operated, worm gear type winch machine along with base plate of 5 mm thickness. Oiling and greasing the gear and bearings mechanism before fitting. Providing and fitting of rain pipe over the winch machine to secure the stem rod and machinery. Loading the gate structure along with winch machine on the mechanical transport for carrying to site of installation. Unloading the gate structure at road side then shifting to the site of installation. Fabrication of outer structure of the gate by cutting MS channels ISMC 100 using gas cutting. Providing, fitting and welding of 2 lengths of ISMC 100 channels over the canal to support the winch machine. The channel should be welded and grouted over and inside the groves fabricated in the civil structure. The height for installation of winch machine should be about 6 ft from bottom for easy operation and maintenance of the gates. The job includes required civil work for installation and grouting of frame on the structure with M15 grade concrete. Installation of gate structure by way of lowering the leaf structure into the sliding grooves using skilled manual labour using crane after taking out the old structure ,leaf,supports and winch machine . Drilling requisite no. of holes in hoisting channels at site. Fitting of winch machine on the supporting channel and connecting the stem rod to the leaf structure after ensuring the proper alignment/gravity of the gate structure. Job includes rebate on old material frame structure ,leaf and winch machine .Then complete painting of gate structure with one coat of red oxide primer and superior quality enamel paint ( Asian paints/ Kansai Nerolac paints/ Berger paints). Note: - The tenderers are requested to visit the site and quote the rates as per site conditions. Any modifications/ alterations of the job, absolutely necessary if required at the time of execution may be done as per actual site conditions. The size of gate and outer frame can vary by +- 10 percent as per the civil structure and site conditions.

M/S GANPATI ELECTRICAL AND MECHNICAL WORKS

N B Engineering and Electric Works