WBPWD/EE/KED/NIT_23/2019_20/1

Amount

Supply ,Fitting & Fixing of Table Main Desk + ERU+Pedestal (Model: Godrej make Finesse 5026+ERU 3616+Pedestal or Similar make equivalent model) from ISO 9001:2015, ISO 14001, OHSAS 18000, BIFMA,AIOTA,Greenguard Certified Manufacturers and as per approved drawing & design / specification. Table Top is 25 MM THICK PLAIN PARTICLE BOARD (PPB) CLAD WITH 0.6MM THICK POST FORMED LAMINATE AND 1MM THICK BACKING LAMINATE (BDL). FLAT EDGE DULY SEALED WITH 2MM THICK PVC BEADING. Modesty Panel is of 18MM THICK PLAIN PARTICLE BOARD (PPB) CLAD WITH 1.0MM THICK DECORATIVE LAMINATE (DL) ON BOTH SIDES. EDGE SEALED WITH 2MM THICK PVC BEADING.ERU Top is 25 MM THICK PLAIN PARTICLE BOARD (PPB) CLAD WITH 0.6MM THICK POST FORMED LAMINATE AND 1MM THICK BACKING LAMINATE (BDL). FLAT EDGE DULY SEALED WITH 2MM THICK PVC BEADING. Modesty Panel is of 18MM THICK PLAIN PARTICLE BOARD (PPB) CLAD WITH 1.0MM THICK DECORATIVE LAMINATE (DL) ON BOTH SIDES. EDGE SEALED WITH 2MM THICK PVC BEADING.25 MM THICK PLAIN PARTICLE BOARD (PPB) CLAD WITH 0.6MM THICK POST FORMED LAMINATE AND 1MM THICK BACKING LAMINATE (BDL). FLAT EDGE DULY SEALED WITH 2MM THICK PVC BEADING. Modesty Panel is of 18MM THICK PLAIN PARTICLE BOARD (PPB) CLAD WITH 1.0MM THICK DECORATIVE LAMINATE (DL) ON BOTH SIDES. EDGE SEALED WITH 2MM THICK PVC BEADING.

Supply ,Fitting & Fixing of Main Desk 6' (Godrej Make Impress Main Desk 6' or Similar make equivalent model) from ISO 9001:2015, ISO 14001, OHSAS 18000, BIFMA,AIOTA,GREENGUARD Certified Manufacturers and as per approved drawing & design / specification . All dimensions are in mm with variation upto +/-10%. MAIN TOP: MDF + VENEER + PU Coating of Size : 1800 W * 900 D * 750 H. TOP THICKNESS – 65 mm.A leather pad on the desk adds class as well as segregates the main work area.It has an in-built KBPT . MODESTY : Size : 1640 X 600 X16 MM , MDF + Veneer + PU Coating. MOBILE PEDESTAL: MDF/PLB + Veneer + PU Coating , Size :510W * 635H * 445D mm. ERU TOP : MDF + VENEER + PU Coating, Size : 1200 W x 445 D x 660 H. TOP THICKNESS – 25 mm.offers space for storage as well as CPU.

Supply ,Fitting & Fixing of High Back Chair ( Model : Godrej Make Marvel or Similar make equivalent model) from ISO 9001:2015, ISO 14001, OHSAS 18000, BIFMA,AIOTA,GREENGUARD Certified Manufacturers and as per approved drawing & design / specification.The Cushioned seat is made of Injection moulded Plastic outer & inner. Plastic Inner is upholstered with leatherette and moulded High Resilience (HR) Polyurethane foam of Density 45±2 kg/m3,and hardness load 16 ± 2 kgf as per IS:7888 for 25% compression. *Seat SIZE : 47.0 cm. (W) x 48.0 cm. (D) BACK ASSEMBLY: The Cushioned back is made of PU Foam with in-situ moulded MS E.R.W Round Tube of size 1.9±0.03cm x 0.16 ±0.0128cm. It upholstered with Leatherette. *MID BACK SIZE: 47.7 cm. (W) x 60.1 cm. (D) The armrest top is moulded from polyurethane(PU) and mounted on to a drop lift adjustable type tubular armrest support made of 03.81±0.03 cm x 0.2±0.01 cm thk M.S. E.R.W tube having chrome plated finish.The armrest height adjustable up to 6.5±0.5cm in 5 steps. The adjustable tilting mechanism is designed with the following features:360' revolving type.Front-pivot for tilt with feet resting on ground and continuous lumbar support ensuring more comfort.Tilt tension adjustment can be operated in seating position.5-position Tilt limiter giving option of variable tilt angle to the chair.Seat/back tilting ratio of 1: 2The mechanism housing is made up of HPDC Aluminium black powder coated. Seat depth adjustment is integrated in the seat through a sliding mechanism. Seat depth adjustment range is of 6.0±0.5 cm. Back Frame is connected to the Up/Dn mechanism housed in Plastic T spine. It can be adjusted in the range of 7.42±0.5 cm for the comfortable back support to suit individual need. The pneumatic ht adjustment has an adjustment stroke of 10.0±0.3 cm. The pedestal is High Pressure Die cast polished Aluminium and fitted with 5 nos. twin wheel castors. The pedestal is 65.0 ± 0.5cm. pitch-center dia.(75.0 ± 1.0cm. With castors.

Supply ,Fitting & Fixing of High Back Chair (Model : Godrej make Beat High Back chair or similar make Equivalent model)) from ISO 9001:2015, ISO 14001, OHSAS 18000, BIFMA,AIOTA,GREENGUARD Certified Manufacturers and as per approved drawing & design / specification.1. SEAT/BACK ASSEMBLY: The seat & back is made up of 1.2 ± 0.1cm thk. hot pressed plywood upholstered with knitted fabric , over moulded High Resilience Polyurethane foam.* HIGH BACK SIZE: 51.8 cm. (W) x 75.2 cm. (H)* SEAT SIZE : 49.0 cm. (W) x 51.4 cm. (D)2. HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam is moulded with density = 55+/-2 kg/m³ and hardness 16 ± 2 kgf as per IS:7888 for 25% compression.3. ARMRESTS : The adjustable armrest is designed with the following features : • Up-Down adjustment– 8 steps (8.0±0.5 cm range) • Height adjustable armrest structure which is powder coated & fitted with an armrest top. • Fixed Armrest Top is PU molded over metal insert.4. (A) FRONT PIVOT SYNCHRO MECHANISM: The adjustable tilting mechanism is designed with the following features.• 360° revolving type. • Single point control. • Front-pivot for tilt with feet resting on ground ensuring more comfort. • Tilt tension adjustment. • 4-position locking with anti-shock feature. • Seat/back tilting ratio of 1:2. (B) BACK HEIGHT ADJUSTABILITY: Back can be adjusted in 5 positions by manuallySeat can be slide horizontaly as per user convienience. Stroke of seat slide is 5 cm. Stroke of height adjustable spine is 7 cm. Back height adjustability is applicable for for High back and Mid back chair.5. PNEUMATIC HEIGHT ADJUSTMENT: The pneumatic height adjustment has an adjustment stroke of 10.0 ± 0.3 cm.6. PEDESTAL ASSEMBLY WITH CASTORS: The pedestal is injection moulded in black 30% glass-filled Nylon and fitted with 5 nos. twin wheel castors. The pedestal pitch-centerdia is Ø66.1 ± 0.5 cm. (76.1 ± 1.0 cm. with castors).7. TWIN WHEEL CASTORS: The twin wheel castors are injection moulded in black Nylon.

Supply & placement of Visitor chair (Model : Godrej make Bravo Visitor Chair or Similar make equivalent model) from ISO 9001:2015, ISO 14001, OHSAS 18000, BIFMA & GREENGUARD Certified Manufacturers and as per approved drawing & design .Dimension 61.4 cm. (W), 64.5 cm. (D), 89.5 cm (H) , 46.5 cm. (SH) .Greenguard certified 100% VOC free powder coating, Knock-down design reducing transportation emissions, Designed for long life and easy part replacement 99% recyclable. The seat and back are made up of 1.2 plus / minus 0.1 thick hot -pressed plywood measured as per QA method described in OCP-QLTA-P14-18 and upholstered with fabric upholstery covers and moulded polyurethane foam. The back foam is designed with contoured lumbar support for extra comfort. The seat has extra thick foam on front edge to give comfort to popliteal area. The HR polyurethane foam is moulded with density = 45 plus/minus 2 kg/m3 and hardness load 16+_ 2kgf as per IS:7888 for 25% compression. The one -piece armrests are injection moulded from black Co-polymer Polypropylene. The powder coated (DFT 40-60 microns )tubular frame is cantilever type & made of 2.54 plus /minus 0.03cm. X 0.2 plus /minus 0.016cm. Thk. M.S.ER.W.Tube The manufacturer should be having certifications like; BIFMA, ISO 9001:2008, ISO 14001:2004, ISO 18001:2007 and should have Green Guard Certification for few of its products.

Supply ,Fitting & Fixing of Table (Model : Godrej Make Enterprise 1350 Table or Similar make equivalent model) from ISO 9001:2015, ISO 14001, OHSAS 18000, BIFMA,AIOTA,GREENGUARD Certified Manufacturers and as per approved drawing & design / specification .Enterprise 1350 Table without CPU Hanger size shall be 1350 Width mm x 750 Depth mm x 728 Height mm . Top shall be 18 mm thick Pre laminated particle board all work surface edges shall be having duly sealed with 2 mm thick PVC edge banding. Understructure Modesty Panel 18 mm thick Pre laminated particle board . The Rectangular frame shall be fabricated component in 1.2 mm thick CRCA , Finish : powder Coat( epoxy polyster) . Leg shall be fabricated component in 38 mm x 25 mm 1.2 mm thick MS ERW ATube ,finish powder coat ( epoxy polyster).The plastic cap for cable travel shall be injection moulded polypropylene and leveler glide for shall be nylon 6 & MS bolt. The storage shall be having shell and drawer tray 0.6 mm thick CRCA Finish powder coat (epoxy polyster) plus the drawer front shall be 0.8 mm thick CRCA Finish powder coat (epoxy polyster) plus lock with 10 lever and handle and leveller. The wire management shall be horizontal wire carrier 0.7 mm thick CRCA Finish powder coat (epoxy polyster) and vertical wire carrier 0.8 mm thick CRCA Finish powder coat (epoxy polyster).

Supplying and placement of Midback Chair (Model: Godrej Make 7002D Chair or Similar make equivalent model) from ISO 9001:2015, ISO 14001, OHSAS 18000, BIFMA Certified Manufacturers and as per approved drawing & design / secification of Engineer-in-charge. The seat/back shall be made up of 1.2 ±0.1cm thick hot pressed plywood measured and upholstered with fabric and moulded Polyurethane foam together with moulded seat and back covers. The back foam shall be designed with contoured lumbar support for extra comfort. The dimensions of back shall be-50.0 cm (W) x 72.0 cm (H) and of seat shall be-50.0 cm (W) x 46.5cm. (D). The HR Polyurethane foam shall be moulded with density 45±2kg/m3-and Hardness load 16 ±2 kgf as per IS:7888-for 25% compression. The seat cover shall be injection moulded in black co-polymer polypropylene and back cover is vacuum formed from ABS sheets. The one-piece armrests shall be made of black integral skin polyurethane with 50-70 Shore 'A' Hardness and reinforced with M.S. insert. The armrests shall be scratch and weather resistant. The armrests shall be fitted to the seat with seat/armrest connecting strip assembly made of 0.5 ±0.05-cm. thick HR steel.The center tilt mechanism shall be designed as-360° revolving type, 17° ±2° maximum tilt on pivot at center, Upright position locking, Tilt tension adjustment. The tubular frame shall be cantilever type & made of dia 2.54 ±0.03cm. x 0.2 ±0.016cm.thk M.S. E.R.W. tube and black powder coated (DFT 40-60 microns). The pneumatic height adjustment shall have an adjustment stroke of 12.0 ±0.3cm. The bellow shall be 3 piece telescopic type and injection moulded in black Polypropylene. The pedestal shall be injection moulded in black 33% glass-filled Nylon-66 and fitted with 5 nos. twin wheel castors. The pedestal shall be 66.3 ±0.5cm.(76.3±1.0 cm with castors). The twin wheel castors shall be injection moulded in Black Nylon. Overall Dimensions of Chair shall be Seat Height - min 44.2 to max 54.2cm, Height - min78.5 to max 90.5cm, Width & Depth of Chair as measured from pedestal - Width-76.3 cm and Depth-76.3 cm.

Supply ,Fitting & Fixing of Almirah (Model : Godrej make almirah model Storwel or Similar make equivalent model) from ISO 9001:2015, ISO 14001, OHSAS 18000, BIFMA,AIOTA,Greenguard Certified Manufacturers and as per approved drawing & design / specification . 1. Product Size 916mm(W) x 486mm(D) x 1980mm (H) (variation upto +_ 10%) Excluding Leveller in Welded construction. 2. 0.7mm thk (±0.07mm) CRCA* for shelf , 0.8mm thk High yield strength CRCA for doors and back & 0.9mm thk CRCA for all other components.CRCA D' grade as per IS:513, CRCA'D' grade high yield strength as per IS:513 3. Locking & handle Brass handle Two way locking mechanism with shooting bolt 5 Shelving Height wise adjustable shelf mounting Uniformly Distributed Load Capacity per each full shelf is 40 Kg maximum 4.Nos. of adjustable full Shelf. Box file A4 size (85Wx345Hx285D) can be stored vertically on three shelves and the clear space above fourth shelf is 240mm. 5. Leveller M10 screw type leveller with hex plastic base.

Godrej And Boyce Mfg.Co.Ltd.

WELL DECOR