CERTAIN REPAIR TO WOODEN AND STEEL FURNITURE IN RESIDENTIAL AREA ( SECTOR 31, 47 AND 28) AT BRD AF STN CHANDIGARH UNDER GE (AF) MC CHANDIGARH

Amount

Table 900x600 mm with/without drawer (Drg No : 233 & FD-224)

Dismantling of unserviceable leg of table 900mm x 600mm with/without drawer and providing and fixing new teak leg of 1st class hard wood (Teak) and polishing to match all as per drawing and as specified by the Engr-in-charge. (Drg No : 233 & FD-224)

Discription all as per Srl item No 1.10 here in before but top side long rail (Drg No : 233 & FD-224)

Discription all as per Srl item No 1.10 here in before but top side short rail (Drg No : 233 & FD-224)

Description all as per Srl item No 1.10 here in before but Drawer completes all as specified and shown in drawings. (Drg No : 233 & FD-224)

Chair Verandah :- (Drg No : FD-359)

Removing the old newar/cane from chair veranda and re-weaving with new 25mm wide white colour virjion Nylon newar complete all as specified and as directed by the Engineer-in-Charge. (Drg No : FD-359)

M & L for painting to frame of chair veranda with white synthetic enamel paint 1st quality including preparation of surface. (After removing the newar) as specified and directed by Engineer-in-Charge. Make: - ASAIN/NEROLACK/BERGER. (Drg No : FD-359)

M & L for Gas welding to frame of chair veranda including preparation of surface and removing the unwanted welding spot all as directed by Engineer-in-Charge. (Drg No : FD-359)

Supply and fixing with gas welding in replacement of unserviceable portions of frame of Chair Veranda with 20mm conduit pipe of wall thickness 1.6mm duly gas welding complete all as directed by Engr-in-Charge. (Drg No : FD-359)

Chair dining :- FD-279

Supply and fixing in replacement of rear leg with new leg to chair dining of 1st class hard teak wood made to shape and size complete including polishing to match all as specified and shown in drg and as directed by the Engineer-in-Charge. (Drg No : FD-279)

All as per Srl item No 3.10 here in before but front leg of chair dining (Drg No : (Drg No : FD-279)

All as per Srl item No 3.10 here in before but front rail of chair dining (Drg No : (Drg No : FD-279)

All as per Srl item No 3.10 here in before but rear rail of chair dining (Drg No : (Drg No : FD-279)

All as per Srl item No 3.10 here in before but side rail of chair dining (Drg No : (Drg No : FD-279)

All as per Srl item No 3.10 here in before but bottom stiffener of chair dining (Drg No : FD-279)

Material and labour for recanning of chair dining with best quality plastic cane 2mm half round in godrej pattern including removal of old cane including 04x PVC shoe for legs, complete all as specified and directed. Make of cane:- Premier/BR/Arihant/Shah (Drg No : FD-279)

Chair writing:-

Supply and fixing in replacement of rear leg with new legs of 2nd class hard wood to chair writing made to shape and complete including polishing to match all as specified and shown in drg and as directed by the Engineer-in-Charge. (Drg No : FD-202, FD-250 & FD-280)

All as per Srl item No 4.10 here-in-before but front legs. (Drg No : FD-202, FD-250 & FD-280)

All as per Srl item No 4.10 here-in-before but arms. (Drg No : FD-202, FD-250 & FD-280)

All as per Srl item No 4.10 here-in-before but side, front & back rail. (Drg No : FD-202, FD-250 & FD-280)

All as per Srl item No 4.10 here-in-before but stiffner (Side & central one). (Drg No : FD-202, FD-250 & FD-280)

Material and labour for recanning of chair writing with best quality plastic cane 2 mm wide half round in Godrej pattern including removal of old cane including 04xPVC Shoe for legs complete all as specified and directed by Engineer-in-charge. Make of cane: PREMIER/B.R/ARIHANT/SHAH (Drg No : FD-202, FD-250 & FD-280)

Chair Easy :- (Drg No : FD-201 & FD-229)

Supply and fixing in replacement of rear leg with new leg to chair easy of 2nd class hard wood made to shape and size complete including polishing to match all as specified and shown in drg and as directed by the Engineer-in-Charge. (Drg No : FD-201 & FD-229)

All as per Srl item No 5.10 here-in-before but front leg. (Drg No : FD-201 & FD-229)

All as per Srl item No 5.10 here-in-before but arms. (Drg No : FD-201 & FD-229)

All as per Srl item No 5.10 here-in-before but front & back rail of seat/back. (Drg No : FD-201 & FD-229)

All as per Srl item No 5.10 here-in-before but side rail of seat/back. (Drg No : FD-201 & FD-229)

Material and labour for recanning of chair easy with best quality plastic cane 2 mm wide half round in Godrej pattern including removal of old cane and including 04xPVC shoe for legs complete all as specified and directed by Engineer-in-charge. Make of cane: PREMIER/B.R/ARIHANT/SHAH (Drg No : FD-201 & FD-229)

Materials and labour for removing denting wherever required making the surface smooth after removing old paint scrubbing with emery paper, removing existing treatment completely , filling putty at required places and spray painting in OG/Grey/white shade (as required) with two coats of 1st quality synthetic enamel paint out of the following makes Asian/Berger/Nerolac.

Almirah Large Steel (Drg No : FD-67/FD-1031)

Almirah medium Steel (Drg No : FD-67/FD-1032)

Material and labour for replacement of lock of following furniture articles with new lock of brass 4 lever with duplicate keys to be fixed with machine screws of required size all as specified and directed by the Engr-in-charge(Make of lock- HARISON/GODREJ):-

Almirah Large Steel (Drg No : FD-67/FD-1031)

Almirah medium Steel (Drg No : FD-67/FD-1032)

Material and labour for replacement of handle of following furniture items with new handle of Mild steel pressed, heavy duty to be fixed with machine screws and bolts of required size all as specified and directed by the Engr-in-charge:-

Almirah Large Steel (Drg No : FD-67/FD-1031)

Almirah medium Steel (Drg No : FD-67/FD-1032)

Material and labour for removing 3 way locking device (excluding lock and handle) and replacement with new 3 way locking device of following furniture articles as per best trade practice and as directed by the Engr-in-charge:-

Almirah Large Steel (Drg No : FD-67/FD-1031)

Almirah medium Steel (Drg No : FD-67/FD-1032)

Chair Computer (Drg No : FD/E6/MAP/01

Supply and fixing in replacement of unserviceable seat of chair revolving with new seat 75mm thick PU foam with tapestry cloth including 12mm thick ply complete all as per sample and directed by Engineer-in-Charge. (Drg No : FD/E6/MAP/01)

All as per Srl item No. 10.10 here-in-before but back of Chair revolving. (Drg No : FD/E6/MAP/02)

All as per Srl item No. 10.10 here-in-before but hydraulic system of Chair revolving. (Drg No : FD/E6/MAP/02)

All as per Srl item No 10.10 here-in-before but base chromium plated with wheels of Chair revolving. (Drg No : FD/E6/MAP/02)

All as per Srl item No. 10.10 here-in-before but PVC arms of chair revolving. (Drg No : FD/E6/MAP/02)

Bed ply top. (Drg No : FD-246)

Material and labour for removing of existing unserviceable head board of bed ply top and supply of new head board throughout teak wood and inner portion of frame made out of deodar wood one side teak face ply of exterior grade, size and thickness as shown in drawings, finish to be french polished.. (Drg No : FD-246)

All as per Srl item No. 11.10 here-in-before but foot board. (Drg No : FD-246)

Material and labour for removing existing unserviceable ply of bed top and supply and fixing new ply of 12mm thick commercial both size (BWR). Make of ply - Centuri/Duro/National. (Drg No : FD-246)

Material and labour for removing existing unserviceable long rail and supply and fixing new long rail made of sal wood, size as per drg, finish to be french polished. (Drg No : FD-246)

Material and labour for removing existing existing stiffener and supply and fixing new TW stiffener of size 40mmx60mm jointing to long rails as per drg . (Drg No : FD-246)

Side Board. (Drg No : FD-241)

Removing old u/s top of side board and supply and fixing new top made out of 19mm thick commercial particle board over which 1.5mm thick plastic laminated sheet is fixed with natural teak face irrespective what is shown in drgs. (Drg No : FD-241)

Removing old u/s back of side board and supply and fixing new side board made out of 6mm thick commercial plywood irrespective what is shown in drgs. (Drg No : FD-241)

Removing old u/s drawer of side board and supply and fixing new drawer. The front of drawer shall have 19mm thick veneer one face particle board side and back of drawer shall be of 12mm thick particle board having commercial ply on both sides. Bottom of drawer shall be made of 6mm thick plywood commercial, irrespective what is shown in drgs. (Drg No : FD-241)

Removing old u/s shutter of side board and supply and fixing new shutter made out of 19mm thick prelaminated particle board 1 face teak veneer. The shutter shall have continuous piano hinges, irrespective what is shown in drgs. (Drg No : FD-241)

Chair Visitor/Chair writing cushioned with arms :-

Supply and fixing in replacement of unserviceable seat of chair visitor with new seat 75mm thick foam with including 12mm thick ply all as per sample and directed by Engineer-in-Charge (TP)

All as per Srl item 13.10 here in before but back of chair visitor (TP)

Supply and stitching in replacement of old/worn out tapestry of seat & back chair visitor/chair writing in dark colour all as per sample and as directed by Engineer-in-charge. (TP)

Supply & fixing in replacement of unserviceable PVC arms of chair visitor /chair writing with new PVC arms all as specified and directed by the Engineer –in- charge. (TP)

M & L for Gas welding to frame of chair visitor /chair writing including preparation of surface and removing the unwanted welding spot all as directed by Engineer-in-Charge. (TP)

M & L for painting to frame of chair visitor /chair writing with black synthetic enamel paint including preparation of surface as specified and directed by Engineer-in-Charge. (TP)

Supply and fixing in replacement of rubber shoes to chair visitor /chair writing all as specified and directed by Engineer-in-Charge. (TP)

Replacement of existing worn out check nuts with new galvanized iron, medium grade, check nuts suitable for 32 mm bore GI Pipe, complete all as specified. (Drg No : FD-220)

Replacement of existing worn out elbows with new galvanized iron elbows, three ways, ISI marked, medium grade suitable for 32 mm bore GI Pipe, complete all as specified. (Drg No : FD-220)

Replacement of existing worn out/damaged long rails of GI Charpoys with new galvanized iron rail, 32 mm bore, medium grade, duly threaded, length as required as per drawing, complete all as specified. Make:- Jindal/Tata (Drg No : FD-220)

Replacement of existing worn out short rails converted from worn out broken long rails by cutting the worn out portion, rethreading on ends, all as directed by Engineer-in-Charge. (Drg No : FD-220)

Replacement of existing worn out legs converted from worn out broken short rails by cutting the worn out portion, rethreading on, all as directed by Engineer-in-Charge. (Drg No : FD-220)

Material and labour conversion of GI Pipe charpoy Nylon Newar unit into hard top by providing 12mm thick plywood, ISI Marked, BWR grade, commercial type on both sides, of size 1950x900mm (corner of ply should be rounded shape) complete supported with three Nos Iron MS Flat 32x5x900mm duly painted with tightning of 13 Nos Nuts, Bolts and 02 washers complete all as specified and directed by Engineer-in-Charge Make of Plywood : NATIONAL/CENTURY/KIT PLY (Drg No : FD-220)

Replacement of Existing unserviceable rubber cushion of 40 density with new foam cushion of size 53cmx55cmx10cm duly covered with tapestry cloth of shade approved by Engineer-in-Charge complete all as directed Make : SLEEPWELL/KURLON/COIRFOAM

Replacement of Existing unserviceable rubber cushion of 40 density with new foam cushion for Chair Dining MAP of size 44cmx39cmx12cm duly covered with tapestry cloth of shade approved by Engineer-in-Charge complete all as directed Make : SLEEPWELL/KURLON/COIRFOAM

Chair dining MAP drg :- FD/E6/MAP/10

Supply and fixing in replacement of rear leg with new leg to chair dining MAP of 1st class hard teak wood made to shape and size complete including polishing to match all as specified and shown in drg and as directed by the Engineer-in-Charge. (Drg No : FD/E6/MAP/10)

All as per Srl item No 22.10 here in before but front leg of chair dining MAP (Drg No : FD/E6/MAP/10)

All as per Srl item No 22.10 here in before but back stiffener of chair dining MAP (Drg No : FD/E6/MAP/10)

All as per Srl item No 22.10 here in before but bottom stiffener of chair dining MAP (Drg No : FD/E6/MAP/10)

Material and labour for cleaning and dusting , removal of unwanted settled dirt from every exposed wooden surface with sand paper, filling the cracks with putty, making the surface smooth and polishing with French spirit polish (Spirit polish mixture of spirit & lakh dana) with fine quality malmal cloth to:-

Bed ply top. (Drg No : FD-246)

Chair easy (Drg No : FD-249)

Chair writing (Drg No : FD-250 & FD-280)

Chair dining (Drg No : FD--279 & 16(R)(MAP)

Table writing (Drg No : FD-275, FD-282, FD-252)

Table peg. (Drg No : FD-277)

Table centre. (Drg No : FD-235 & 274)

Table 900x600x760mm with / without drawer. (Drg No : FD-284)

Chair Dining MAP (Drg No : FD/E6/MAP/10)

Material and labour for removing of existing unserviceable ply of Charpoy GI ply top and supply and fixing new ply of 12mm thick commercial both side (BWR). Make of ply: CENTURY/DURO/NATIONAL (Drg No : FD-246)

Material and labour for removing of existing unserviceable top of the following tables and supply and fixing of new top of any size of 18mm thick pre-laminated particle board (exterior grade) natural teak shade on both side including 4mm teak wood beading all around duly polished complete all as specified and directed. Make: BHUTTAN BOARD/NOVAPAN. ISI marked :-

Table 900x600x760mm WITH/without drawer. (Drg No : FD-283 & 284)

Table centre. (Drg No : FD-235)

Table peg. (Drg No : FD-277)

Table 900x900 steel

Teapoy Varandah MAP

Table centre:- (Drawing No : FD-274)

Dismantling of unserviceable leg of table centre and providing and fixing new 1st class hard wood teak legs including polishing to match all as per drawings and as specified. (Drg No : FD-274)

Description all as per Srl item No 26.10 here in before but top side long rail -ditto- (Drg No : FD-274)

Description all as per Srl item No 26.10 here in before but top side short rail -ditto- (Drg No : FD-274)

Description all as per Srl item No 26.10 here in before but stiffner -ditto- (Drg No : FD-274)

Table peg:- (Drawing No : FD-236/277)

Dismantling of unserviceable leg of table peg and providing and fixing new 1st class hard wood teak legs including polishing to match all as per drawings and as specified (Drg No : FD-236/277)

Description all as per Srl item No 27.10 here in before but top side long rail -ditto- (Drg No : FD-236/277)

Description all as per Srl item No 27.10 here in before but top side short rail -ditto- (Drg No : FD-236/277)

Description all as per Srl item No 27.10 here in before but stiffener -ditto- (Drg No : FD-236/277)

Table Bed Side Map (Drg No. - FD/E6/MAP/15)

Removing of unserviceable top of table bed side map and M&L for fixing of new top made out of 18mm thick prelaminated pastick board having T.W beading all round duly polished all as per drg & as directed by Engr-in-Charge. (Drg No : FD/E6/MAP/15)

Removing of unserviceable back & sides of Table Bed Side (Map) and S&F New back & sides of table Bed Side Map made out of 18mm thick prelaminted partick board all as shown on drg & as directed by Engr-in-Charge (Drg No : FD/E6/MAP/15)

Removing of U/S square pipe and S&F New square pipe (18x18mm thick) of table bed side map and as shown on drg & as directed by Engr-in-Charge. (Drg No : FD/E6/MAP/15)

Telescopic channel for drawer of table bed side map (Drg No : FD/E6/MAP/15)

Handle for table bed side map with screws. (Drg No : FD/E6/MAP/15) NOTE :- All Drawings are not enclosed with these documents . These are available for perusal in the office of BSO GE (AF) MC Chandigarh.

Table dressing ladies (Drg No. - FD-251)

Material and labour for repair/rejointing of mirror frame and supply and fixing new ply at the back alongwith key plates to the mirror complete as shown on drg and as directed by Engr-in-Charge. (Drg No : FD-251)

Material and labour for supply and fixing in replacement of legs of table dressing ladies with new teak wood leg complete as shown on drg and as directed by Engr-in-Charge. (Drg No : FD-251)

Removing of old us drawers of table dressing ladies and supply and fixing new drawers, side and back of drawer shall be of 12mm thick teak wood plank. Bottom of drawer shall be of 6mm thick commercial plywood. Front of drawer shall be of 19mm thick particle board commercial over which 1.5mm thick plastic laminated sheet is fix. 3mm thick teak wood edging shall be provided to all sides complete all as shown on drg & as directed by Engr-in-Charge. (Drg No : FD-251)

Removing of old us back of table dressing ladies and supply and fixing new back made out of 12mm thick particle board with commercial ply on both side, complete all as shown on drg & as directed by Engr-in-Charge. (Drg No : FD-251)

Removing of old us top of table dressing ladies and supply and fixing new top made out of 19mm thick commercial particle board over which 1.5mm thick plastic laminated sheet is fixed, complete all as shown on drg & as directed by Engr-in-Charge. (Drg No : FD-251)

Chair wooden bottom without arms :- (Drg No :FD-285 )

Supply and fixing in replacement of rear leg with new leg to chair easy of 2nd class hard wood made to shape and size complete including polishing to match all as specified and shown in drg and as directed by the Engineer-in-Charge. (Drg No : FD-285)

All as per Srl item No 30.10 here-in-before but front leg. (Drg No : FD-285)

All as per Srl item No 30.10 here-in-before but front rail. (Drg No : FD-285)

All as per Srl item No 30.10 here-in-before but rear rail. (Drg No : FD-285)

All as per Srl item No 30.10 here-in-before but side rail. (Drg No : FD-285)

All as per Srl item No 30.10 here-in-before but bottom stiffener.(Drg No : FD-285)

Replacement of damaged wooden plywood sheet 6mm thick of chair wooden bottom without arms as per existing size and shape including necessary bamboo pins & adhesive etc complete all as shown on drg & as directed by Engr-in-Charge (Drg No : FD-285)

Note:- Amount of credit of Rs. 105700.00 for retrieved materials is mentioned in Schedule of Credit of tender documents in pdf form which will be deducted offline while acceptance of tender.

CITIZEN FURNITURE INDUSTRIES

Daya Nand Jindal

Modern Enterprises

M/s Bhisham Raj and Sons

ASHOKA FURNITURES

M/S Bangali Ram