Loading
Loading…
Loading…
Tender Value
Refer Docs
Closing Date
29 Dec 2025, 2:30 pmClosed
Single Packet
Normal Tender
No
Not Applicable
Itemwise/Consigneewise
Lowest to Highest
CONSIGNEE
Not Applicable
60 days
Expenditure
General
LP
4 conditions
The Railway reserve the right to procure full or bulk quantity of tendered item is restricted to be procured from RDSO/ICF/RCF/MCF approved sources only.
Trading Enterprises and authorized agent/dealers of OEM will not be extended any MSE benefits.
Land Border Criterion : This tender is governed by RB L/No.- 2020/RS(G)/779/2 dtd. 06.08.2020
In case of Authorised dealer, Firm should upload the valid tender specific authorization certificate of the OEM, falling which their offer will be summarily rejected.
28 conditions · 1 needing a document upload
Validity of the offer shall not be less than 60 days.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
1 location across Assam · 5 Numbers total
ELECTRONIC TOE LOAD MEASURING DEVICE As Per RDSO Specification no TM/SM/ETLMD/218(Fourth Revision - 2022 or Latest Date effect from 01.06.2022). TECHNICAL DATA: 1. Capacity of Load Cell -: 2000K.g, 2. Type of Load Cell -: Compression Type / Stainless Steel, 3. Accuracy -: + 20K.g, 4. Operating Voltage -: 5.5V to 5.65V, 5. Resolution -: 1.0K.g, 6. Display -: 16-character alpha numeric LCD display, 7. Sensitivity -: Fast return to zero, 8. Calibration -: Micro controller based auto calibration INTRODUCTION: - Electronic Toe Load Measuring Device is an efficient tool in the hands of Permanent Way Engineers to determine the actual toe load of any Elastic Rail Clip. This Unit gives direct reading of the toe load in terms of Kilograms on its alphanumeric LCD Display. The whole unit is Safe to Handle, compact, rugged, and its light weight is an additional advantage over its Mechanical Counterpart. The device is provided with a Spring Loaded Gap Sensing Device which automatically freezes the required peak value of the toe. A set of Link Hanger, Balancing Legs, and Thrust Bearing & Tongs is provided for pulling the Clip in a uniform and balanced manner. Only 4-5 minutes time is required for installation of device on track, Measurement of reading and removal of device from the line.
TS255587A~NFR
TS255587A
Open - Indigenous
Goods
Assam
₹0
Exempted
29 Dec 2025
17 Dec 2025
1 item · 5 Numbers total
ELECTRONIC TOE LOAD MEASURING DEVICE As Per RDSO Specification no TM/SM/ETLMD/218 (Fourth Revision - 2022 or Latest Date effect from 01.06.2022). TECHNICAL DATA: 1. Capacity of Load Cell - : 2000K.g, 2. Type of Load Cell -: Compression Type / Stainless Steel, 3. Accuracy -: + 20K.g, 4. Operating V oltage -: 5.5V to 5.65V, 5. Resolution -: 1.0K.g, 6. Display -: 16-character alpha numeric LCD display, 7. Sen sitivity -: Fast return to zero, 8. Calibration -: Micro controller based auto calibration INTRODUCTION: - Electr onic Toe Load Measuring Device is an efficient tool in the hands of Permanent Way Engineers to determine the actual toe load of any Elastic Rail Clip. This Unit gives direct reading of the toe load in terms of Kilogram s on its alphanumeric LCD Display. The whole unit is Safe to Handle, compact, rugged, and its light weight i s an additional advantage over its Mechanical Counterpart. The device is provided with a Spring Loaded Ga p Sensing Device which automatically freezes the required peak value of the toe. A set of Link Hanger, Bala ncing Legs, and Thrust Bearing & Tongs is provided for pulling the Clip in a uniform and balanced manner. Only 4-5 minutes time is required for installation of device on track, Measurement of reading and removal o f device from the line. [ Warranty Period: 12 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SSE/PW/PNT, NFR | Assam | 5.00 Numbers |
| Total | 5 Numbers | |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
5633305.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .