Installation of Closed Combustion Cremantion Furnace in Mokshdham of Nagar Parishad Area

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level : 1:1½:3 (1 Cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size).

Providing corrugated G.S. sheet roofing including vertical/ curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete upto any pitch in horizontal/ vertical or curved surfaces) excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 1.00mm thick with zinc coating not less than 275gm/m²

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete:

SITC of Antyesthi Yantra with following specification - (A) Body MS. Sheet size 3mm & 2mm angle structure 50*50*5mm MS (B) Lining Fire bRick alumina 70% with ceramicsboard thickness 50 mm capacity 1260 C. (C) White heat Castable (k) and accost (50) for fire bricks feting (D)Angle 65*65*10 & 35*5 SS 304 grade (E) Rod 30 mm 370 mm SS 304 grade (F)Pipe OD 40mm thickness 5mm SS 304 grade (G) Ceramic Blanket (64D)total bolts & nut MS / SS (H)Thermostat Size 20mm OD *450 mm length (I)Control Panel auto and Manual Both (J) Blower complete wiith fan size 305 mm with air controlled system (K) Motor 1 HP rpm 1440 (L) Chimni Length 3 meter size 350x350mm taper sheet thikness 3 mm with ceramic board lining. (M) Ceramics board fitting 50 mm and 25 mm (N) Both side SS door with lock size - 600 x 550 mm thickness 4 mm SS 304 grade 50 mm ceramic board and ceramic blanket (O) Sliding Trolly alignment bed angle size 50x50mm + 35x35mm + strip, length 4.5 meter Rpe size 75x75mm, 40x40mm & round 40mm ceramic board & ceramic blanket lining. (P) Sliding Trolly cover 1750 x 1 180 x 440 mta sheet size 3 ouo with bearing roller Pipe size 7sx75 mm, 40x40mm & round 40 mm ceramic board & ceramic blanket lining. (Q)Sliding Asthiya & Ash collecting Trey Size 2200 x 350 x 110 mm sheet thickness 3 mm with roller SS 304 grade (R) Coated with heat resistance paint with capacity of 600 degree silver color mm with air controlled system (S) Two step fabricated checker plate and angle size 6'*2'*1' qty 2 including loading, unloading and transportation ele.

SITC of inverter with battries with -o/p voltage-220 V , o/p current 12 amp AC Nominal , I/P current 12 amp AC max, O/p power- 2kva, Power factor-0.8, frequency -50 Hz including 12 V 150 Ah Battrey Rack and Battrey bank comprising SMF/VRLA battries, inter connection wiring etc as requirred complete in all respect.