Additional Repair and Mtc. work of administrative building at CID Zone office Sri Ganganagar

Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 m lead With cement mortar 1 :4 ( 1 cement : 4 coarse sand)

Providing and applying white cement based putty over plastered surface to prepare the surface even and smooth complete

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade including all scaffolding: Two or more coats on new work including prepartion of base with primer, putty, lippy etc complete in all respect.

Providing & fixing UV stabilised fiberglass reinforced plastic sheet roofing upto any pitch including fixing with polymer coated ‘J’ or ‘L’ hooks, bolts & nuts 8mm dia. G.I plain/bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% Ultra-voilet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall confoim to IS 10192 and IS 12866.The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified.

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting (height upto 10 m) , fixing in position and applying a priming coat of approved steel primer all complete:

Wall painting with Royal Play paint with various types of designs as approved of approved brand and manufacture to give an even shade including all scaffalding. Two or more coats on New work including preparation of base with primer, putty lippy etc. Complete in all respect.

Supply and Application of Solar IR Heat Reflective Coating System conforming to BIS Std IS 17218:2019 for concrete surface having minor leakage by thorough surface preparation to remove dust, dirt, molds etc. using High Pressure WaterJet / Wire Brush etc, opening of cracks and filling with elastomeric crack filler, then applying one absorption coat of UV resI tan1 elastomeric coating having min. 50% solids (i.e. Thermacool WP 51/or Equivalent), followed by application of "elastomeric clear coating White Cement" waterproofing coat having min. 400% elongation and tensile strength of 2.2 MPa and than top coating with 2 Coats of Solar lR Heat Reflective Coating conforming to BIS Standard IS 17218:2019 (i.e. Therrnacool 0.3C/or Equivalent) of cementitious surfaces, white colour, matt, surface coverage 3.25 sqm/Ltr/2 wat, dft 100- 120microns.The work shall be done as per the directions of Engineer-in-charges.water based pure acrylic, UV resistant, Solar lR Heat Reflective coating with Pull off Adhesion 2.8 Mpa, passes 2000 hrs accelerated durability test, suitable for all types of cementitious surfaces, white colour, matt, surface coverage 3.25 sqm/Ltr/2 wat, dft 100- 120microns.The work shall be done as per the directions of Engineer-in-charges.

Wire mesh (rabbit).