Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹25.2 LAccepted-AOC | L1 | Accepted-AOC Lowest Tenderer | |
| 2 | L2₹27.0 L+₹1.7 L (6.93%)Rejected-AOC | L2 | Rejected-AOC Second Lowest Tenderer |
Tender Value
₹25.3 L
EMD Value
₹23,000
Closing Date
3 Jan 2025, 3:00 pmClosed
Superintending Engineer, PWD
O/o. The Superintending Engineer, PWD., Building Maintenance Circle, Chepauk, Chennai-5
Provision of 1 No. 6 Persons Passenger Lift to the Local Library Authority Buildings in Anna Salai, Chennai
2024_PWD_513436_1
PWD/BMC/26-2/2024-25
Open Tender
Electrical Works
Lump-sum
Anna Salai
Please refer Tender documents.
8 documents required · 8 mandatory
₹0
₹23,000
24 Apr 2025
31 Dec 2024
3 Jan 2025
31 Dec 2024
3 Jan 2025
31 Dec 2024
Amount
Supply and Erection, Testing, Commissioning and Handing over of 1 No. 6 persons capacity passenger Lifts (408 Kgs) as per following technical specifications. Technical Specifications : 1. Elevator Type : Passenger elevator PWI06/10-19 2. Product : IMonospace 3.No of Units : 1 4.Load & Capacity : 408 kg or 6 persons 5.Speed : 1 m/s 6. Stops & Openings : 5 stops & 5 openings, Single entrance car 7.Total no of opening : 1 entrances 8. Travel height : 14.8 m 9. Elevator Grouping : Simplex Full Collective Control 10. Well Dimension : 1650 mm width and 1650 mm depth (required after plastering) 11. Head Room height : 4000 mm (required) 12. Pit Height : 1600 mm (required) 13.MAP Floor Position : Topmost floor (TOP) 14.Car dimensions : 950 mm wide x 1150 mm deep x 2200 mm high 15. Door dimensions : 800 mm wide x 2000 mm internal height
16.Door type : Two-panel side opening Plain Panel 17.Car design : SS silver hairline Car Panel Finish : SS silver hairline 18. Handrail : Round Bend Handrail Silver brushed stainless steel at Rear Wall 19.Ceiling & Lighting : Integrated roof RS60 Stainless Steel Round spot LED light 20. Flooring : 20 mm recess by KONE. Granite & fixing by customer Car skirting material: Stainless steel Hairline 21.Car Door Finish : Stainless steel Hairline 22. Car operating panel : 1 Full Height Stainless Steel Face Plate Silver brushed StSt Segmented LCD display Square surface mounted Buttons with braille KDS90 23. Landing Signalization : Stainless Steel 7 segment display Flush Mounted Silver brushed StSt Square,surface mounted with braille KDS90 24. Standard : Correction drive to next level Emergency Alarm @ Main Floor Car Call backwards Overload function, constant indication/Buzzer Bypass load Function Auto Cut off Fan and Light Manual Rescue Operation Centralized Hoisting for lesser vibration and smooth travel Pit Ladder
Micro movement Led Based Buttons L.W.D. (Load Weighing Device) Direction & Position Indicator In Car & Landing Advanced Car Position Indication Automatic Brake Test function every 11hours Every run brake supervision Phase reversal functioning Signal Fixtures +10% to –10% Voltage Fluctuation Withstanding Capacity Door Close Button Door Open Button Car Emergency Light Fireman Drive Curtain of Light 169 Beams Accurate Relevelling, Automatic, Closed Door E, With emerg.opening device 25. Additional Emergency Rescue Device with audio announcer 2 Way Dedicated Intercom Attendant Service Dummy floors Round spot LED light A, 1 Hour Fire rated.
Rewiring with 2 x1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with Module Plastic surface mounting switch box on wall with 6A one way module switch with module front plate with painting of Suitable colour for Open PVC Light point / fan point (for electronic regulator) ( 6 points / Coil).
Supply and fixing of Havells make PLUTOSURFACE 1X1PLS15W LED 857S fitting on ceiling with necessary connections.( Philips / Havells/ Equivalent make).(Lift Head room)
Supply & Fixing of Havells make surface mounted bulk head fitting HEXAF T10 WLED 857SSY MBOPC for lift shaft.
Supply & Fixing of 400mm sweep Wall mounted fan on the wall.
Supply and fixing of 2 nos.6/16A two module socket , 2 nos. 16A one module switch on suitable module surface mounting Box ( Plastic ) with module cover plate (plastic) on wall with connections.
Supply and fixing of 8 way Vertical Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 63A 4P MCB switch as incoming and 3 nos. 32A 3P MCB, 15 nos. 6A to 32A SP MCB as outgoing on wall with earth connection only
Supply and fixing of 12 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 40A DP MCB Isolator as incoming and 10 nos. 6A to 32A SP MCB as outgoing on suitable angle iron frame on wall with earth connection only.
Supply and Run of 2 of 4 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection by 4 sq.mm. PVC insulated SC unsheathed FRLS copper wire with painting of suitable colour.
Supply and Run of 2 of 6 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection by 6 sq.mm. PVC insulated SC unsheathed FRLS copper wire with painting of suitable colour.
Supply and Run of 4 of 10 sq.mm. (140/0.3) PVC insulated SC unsheathed copper conductor of 1100 V grade in suitable PVC rigd pipe on wall and ceiling with continuous earth wire connection by 4 sq.mm. PVC insulated SC unsheathed copper wire with painting of suitable colour.(From TPN to Vertical DB).
Supply and clarnping of 3-1/2 x 50 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamp.
Supply and providing cable end termination of 3-1/2 x 50 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete.
Supply and fixing of brass cable gland for 3-1/2 x 50 sq.mm. PVC LTUG aluminium armoured cable with earth Connection.
Earthing as per the ISI specification with an earth electrode of 2.10 metre Class'B' GIpipe of dia not less than 40mm with copper earth plate of size 125mmx50mmx 6mm with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry.
Supply and run of 25mm x 3mm tinned copper flat with necessary clamps / supports on wall / floor / ground for earth connection.
U.S. ELECTRICALS (BID ID -1224400)
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_613546.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .