REPAIR/ MAINT OF APFC PANELS, LIGHTENING ARRESTORS, JUNCTION BOXES, ST LIGHT PANELS AND SUBMAIN WIRING AT DIFFERENT MD/ OTM ACCNS INSIDE VIJAY DURG UNDER GE (FW) KOLKATA

Amount

M&L for Opening & Disconnecting LT Cable Connections with carefully from Automatic Power Factor Panels of 125 KVAr capacity, checking of the panels installed at Main Power House & OTM Power House and testing their operation and mechanical system including detection and replacement of the unserviceable parts/ accessories required at site to make the Power Factor Panel completely functional including cleaning/ servicing of complete unit and re-connection of the panel complete all as specified and directed. Note :- Provision of new spare parts as required shall be measured and paid separately.)

M&L for Opening & Disconnecting LT Cable Connections with carefully from Automatic Power Factor Panels of 50 KVAr to 75 KVAr capacity, checking of the panels installed at MES IB Sub Stn, Area Drainage, Cinema hall & ASCON Sub Stn and testing their operation and mechanical system including detection and replacement of the unserviceable parts/ accessories required at site to make the Power Factor Panel completely functional including cleaning/ servicing of complete unit and re-connection of the panel complete all as specified and directed. Note :- Provision of new spare parts as required shall be measured and paid separately.)

S&F of capacitor Heavy duty cylindrical type, 5 KVAr Rating @ 440V, 3Ph, 50Hz including taking out old unserviceable, complete all as specified and as directed. MAKE : EPCOS/ L&T/ SCHNEIDER

S&F of capacitor Heavy duty cylindrical type, 10 KVAr Rating @ 440V, 3Ph, 50Hz including taking out old unserviceable, complete all as specified and as directed. MAKE : EPCOS/ L&T/ SCHNEIDER

S&F of capacitor Heavy duty cylindrical type, 15 KVAr Rating @ 440V, 3Ph, 50Hz including taking out old unserviceable, complete all as specified and as directed. MAKE : EPCOS/ L&T/ SCHNEIDER

S&F of capacitor Heavy duty cylindrical type, 20 KVAr Rating @ 440V, 3Ph, 50Hz including taking out old unserviceable, complete all as specified and as directed. MAKE : EPCOS/ L&T/ SCHNEIDER

S&F of capacitor Heavy duty cylindrical type, 25 KVAr Rating @ 440V, 3Ph, 50Hz including taking out old unserviceable, complete all as specified and as directed. MAKE : EPCOS/ L&T/ SCHNEIDER

S&F of capacitor Heavy duty square(box) type, 5 KVAr Rating @ 440V, 3Ph, 50Hz including taking out old unserviceable, complete all as specified and as directed. MAKE : EPCOS/ L&T/ SCHNEIDER

S&F of capacitor Heavy duty square(box) type, 10 KVAr Rating @ 440V, 3Ph, 50Hz including taking out old unserviceable, complete all as specified and as directed. MAKE : EPCOS/ L&T/ SCHNEIDER

S&F of capacitor Heavy duty square(box) type, 15 KVAr Rating @ 440V, 3Ph, 50Hz including taking out old unserviceable, complete all as specified and as directed. MAKE : EPCOS/ L&T/ SCHNEIDER

S&F of capacitor Heavy duty square(box) type, 20 KVAr Rating @ 440V, 3Ph, 50Hz including taking out old unserviceable, complete all as specified and as directed. MAKE : EPCOS/ L&T/ SCHNEIDER

S&F of capacitor Heavy duty square(box) type, 25 KVAr Rating @ 440V, 3Ph, 50Hz including taking out old unserviceable, complete all as specified and as directed. MAKE : EPCOS/ L&T/ SCHNEIDER

S&F of capacitor Heavy duty square(box) type, 30 KVAr Rating @ 440V, 3Ph, 50Hz including taking out old unserviceable, complete all as specified and as directed. MAKE : EPCOS/ L&T/ SCHNEIDER

S&F of capacitor Heavy duty square(box) type, 50 KVAr Rating @ 440V, 3Ph, 50Hz including taking out old unserviceable, complete all as specified and as directed. MAKE : EPCOS/ L&T/ SCHNEIDER

S&F of Automatic Power Factor Controller Relay type Voltage 230 Volt 8 Step with 3 Phase / 3 CTs, connecting Single Phase and Three Phase Capacitors, compensation of each Phase, Measures Power Factor with RS-485 including taking out old unserviceable, complete all as specified and as directed. MAKE : SCHNEIDER/ HPL/ L&T/ EPCOS

Isolating the device and checking of LT ACBs 630-800 Amps capacity and testing its operation and tripping devices and mechanical system and setting it right clearing/servicing complete unit and recharging complete in position for Air Circuit Breaker complete all as specified and as directed. Make- GE , L&T, Crompton Greaves, Legrand or Schneider.

Supply and fixing in repair Motorised Changeover switch open execution type, 415V, 3 phase 4 pole 400 Amps with AST Controller with wire harness to be fixed on existing panel board all as directed by Engr-In-Charge Make : L&T Cat Part No. CK90161B000 + CK901920000 or equivalent make specified in tender.

Supply and fixing GI tubing 50mm bore (Medium grade) in trenches/floor/fixed along pole for cable/earth strip protection with proper size of clamp, nuts and bolts or for fixing lightening conductors etc all as specified and as directed .

Material and labour for PCC (1:2:4) type B-2 using 20 mm graded crushed stone aggregate as in coping of poles / pipes / strip alignment etc using necessary formwork and finishing the exposed surfaces even and smooth without using extra cement, as directed by the Engineer-in-Charge.

Material and labour for Earth continuity conductor fixed to wall or on batten or recess or chases or burried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required of 25 x 3.15 mm alluminium strip all as specified and as directed by Engineer-in-Charge.

Supply and fixing Copper strip 20mm x 3.15mm with saddles and fixing screws etc. for roof conductors and down conductors above ground complete all as directed by Engineer-in-Charge.

Supply and fixing Air termination single pointed, aluminium rod 12mm dia and 300mm long fixed on Galvanised iron pipes with copper/aluminium/GI strip for earth conductivity to ground complete all as directed by Engineer-in-Charge.

Supply and fixing Air termination single pointed, copper rod 12mm dia and 300mm long fixed on Galvanised iron pipes with copper/aluminium/GI strip for earth conductivity to ground complete all as directed by Engineer-in-Charge.

Supply and fixing test point terminal block made of gun metal or phosphorous bronze size 75mm x 75mm x 25mm, drilled and screwed including 3 Nos, 8mm dia and 25mm long hex head screw complete all as directed by Engineer-in-Charge

M&L in replacement Earthing complete with Galvanised iron earth plate electrode 600mm x 600mm x 6mm thick, burried directly and preferably vertically in ground, earth pit not less than 2.25 Mtr deep below ground level with top edge of the plate not less than 1.5 Mtr below ground level connected with GI wire 4.00 dia connected with nuts, bots, check nuts and washers made of galvanised iron or steel earthing lead to be protected by galvanised iron pipe 25mm bore (medium grade) and other end connected to earthing test point or lightening arrestor or main controlling switch as directed including providing funnel with 20mm bore galvanised iron pipe (light grade), wire mesh, charcoal or coke and common salt in alternate layer of 15cm (compacted thickness) all round the earth electrode, concrete earth pit in PCC (1:3:6) type C-1 (with 20mm graded aggregate), 50mm thick precast RCC (1:2:4) cover slab (reinforced with 8mm dia TMT bar @ 15 cm C/C both ways and suitable handle made of 10mm dia) including necessary earth work in excavation, returning filling and removal of surplus earth upto a distance not exceeding 50 Mtr etc all as shown on electrical plate No.3 of MES Schedule Part-I complete including taking down and testing on completion complete all as specified and as directed by the Engineer-in-Charge.

M&L in replacement Earthing complete with Galvanised iron earth plate electrode 600mm x 600mm x 6mm thick, burried directly and preferably vertically in ground, earth pit not less than 2.25 Mtr deep below ground level with top edge of the plate not less than 1.5 Mtr below ground level connected with galvanised earthing strip of size 32mm x 6mm by means of nuts, bots, check nuts and washers made of galvanised iron or steel earthing lead to be protected by galvanised iron pipe 40mm bore (medium grade) and other end connected to earthing test point or lightening arrestor or main controlling switch as directed including providing funnel with 20mm bore galvanised iron pipe (light grade), wire mesh, charcoal or coke and common salt in alternate layer of 15cm (compacted thickness) all round the earth electrode, concrete earth pit in PCC (1:3:6) type C-1 (with 20mm graded aggregate), 50mm thick precast RCC (1:2:4) cover slab (reinforced with 8mm dia TMT bar @ 15 cm C/C both ways and suitable handle made of 10mm dia) including necessary earth work in excavation, returning filling and removal of surplus earth upto a distance not exceeding 50 Mtr etc all as shown on electrical plate No.3 of MES Schedule Part-I complete including taking down and testing on completion complete all as specified and as directed by the Engineer-in-Charge.

Supply & Installation and testing on commissioning of Advance conductive compound based chemical compound technology with upgraded high tensile low carbon steel rod as per UL 467 and as per BS 7430 with copper Coating 250 microns. Earthing system confirming to IS:3034. The ROD should 17.2 mm & 3 Meter length with rod to tape clamp, CR 125 (type A) additional protection of the terminal. Chemical compound should be The highly Conductive Compound as per BSEN 50164-7with 25kg each bag & resistivity should be 0.05 ohm meter. The job includes digging the pit and refilling the same by fursecem Back Fill Compound (Ground Enhancer), the BFC should be eco friendly it should not contain environmentally hazardous material/metal having mixed with 3:1 cement , a conductive concrete is formed. The earth pit should provided with a light weight inspection pit cover PT -205 for protection and safe guard of terminals. In areas where soil condition is bad Good earth is to be arranged to fill the excavated pits by mixing fursecem a convenient and permanent solution by adding with 3:1 ratio chemical compound with the earth electrode is the main component of the earthing system which is in direct contact with the ground and thus provides a mean of releasing or collecting earth leakage currents. The material should have good electrical conductivity and anti corrosion property in wide range of soil conditions. Make : ABB FurseCEM as per RB 336. Each earth pit should contain:- 1.) 1 no. copper bonded high tensile low carbon steel, 17. 2 mm dia , 3 meter length. 2.) Rod to tape clamp (type A). 3.) 25kg chemical compound as per BSEN 50164-7 4.) Light weight inspection pit cover with 5000kg weight load capacity Complete all as specified and directed by Engr-in-charge.

M & L for Cross arms, bracings, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of paint complete all as specified and directed

Excavation in trenches in any type of soil not exceeding 1.5 meter wide and not exceeding 1.5M in depth for laying of Cables, poles, stay and getting out of excavated material complete all as specified and directed by Engineer-in-Charge

Excavation in Trenches exc. for each additional 1.5m or part thereof in depth beyond the first 1.5 m for laying of steel tubular pole/Stays, etc., getting out including forming bottom surface to required level and gradient in Soft/ Loose Soil and getting out, complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick each, excavated soil in trenches after the cables have been laid and tested complete all as specified and directed by Engineer-in-Charge

Removal of surplus soil to a distance not exc. 50m and deposited where directed at a level not exc. 1.5 m above the starting point all as specified and as directed.

M&L for sand cushioning as per para 19.75 of SSR Part-I(2009) in trenches for underground cable protection and consolidated and compacted with clean dry sand complete all as specified and directed by engineer-in-charge. NOTE: Punned thickness only shall be measured for payment.

M&L for Brick protection with subclass ‘B’ bricks old size, laid dry, flat over cable perpendicular across the cable in trenches complete all as specified.

Laying Only Serviceable Bricks after cleaning by wire brush obtained from taking out unserviceable LT cable in connected items here-in-after.

Taking out of interlocking paver block, any shape or size and Re-laying the same after removing all vegetation, algae, grass etc, laid to proper slope & gradient over sand cushioning complete all as specified and directed. (NOTE: Sand, if required for correction of cushioning level will be measured and paid separately. Replacement of broken paver block shall be paid separately as "Supply only")

Material and labour for machine pressed precast concrete interlocking paver block with grey cement and pigment of any shape and size as approved by GE conforming to IS 15658-2006 of 60 mm thickness, M-35 grade complete all as specified and directed.

Taking down unserviceable 10 sqmm 4 core to 16 Sqmm, 4 Core LT cable for repair/ replacement etc (from cable duct/underground trench / pole), stacking properly (cable, pipe and bricks) complete all as directed by the Engr-in-Charge of the following cross - sections :- (Note :- Necessary earth work to be measured and paid separately.

All as per item No 38.00 above but 25 Sqmm to 35 Sqmm, 3.5 core

Relaying of 10 sqmm 4 core to 16 Sqmm, 4 Core XLPE insulated, screened PVC bedded, galvanised steel strip or wire armoured electric power cable 1100 Volts grade with stranded aluminium conductor cable, laid in trench or fixed to wall / passing through pipe/ pole. (retrieved against item No 1 above) incl necessary aluminium thimbles, jointing and testing complete all as specified and directed for the following sizes and cross sectional area :- (Note :- Necessary earth work to be measured and paid separately.

All as per item No 40.00 above but 25 Sqmm to 35 Sqmm, 3.5 core

Supply, Laying, jointing and testing XLPE insulated, screened PVC bedded, galvanised steel strip or wire armoured electric power cable 10 Sqmm, 4 core 1100 Volts grade with stranded aluminium conductor cable, laid in trench or fixed to wall/passing through pipe/pole incl necessary thimbles complete all as specified and directed for the following sizes and cross sectional area :- (Note :- Necessary earth work to be measured and paid separately.

All as per item No 42.00 above but 16 Sqmm, 4 core

All as per item No 42.00 above but 25 Sqmm, 4 core

All as per item No 42.00 above but 35 Sqmm, 3.5 core

M&L for replacement of electronic driver with input voltage 220 to 240 volts and output voltage suitable for 35W to 120W street light LED luminaire, complete all as specified and directed for the following types and capacities:-. (NOTE: Make of driver shall be as OEM or any other make as specifically approved by GE)

All as per item No 47.00 above but 50 W to 250W flood light luminaire

All as per item No 47.00 above but 8 W to 20W bollard

All as per item No 47.00 above but 20W to 40Wpost top lantern

Supply and fixing in repair of Glow sign board of electrical driver including LED of 2W to 10W with input voltage 220 to 240 volts and output voltage suitable for different LED of luminaires, complete all as specified and directed for the following types and capacities:-. (NOTE: Make of driver shall be as OEM or any other make as specifically approved by GE)

Material and labour for brick work with locally available sub class ‘B’ old size best quality bricks straight or curved on plan exc 6 m mean radius built in cement mortar (1:6) all as specified and directed.

M&L for replacement of Pole Mounted Junction Box 254 x 180 x 111mm, having insulated and made out of thermoplastic Polycarbonate with glass fibre reinforced, rated for Degree of Ingress Protection IP 66 in accordance with IEC 60529, IK 07, weather proof for outdoor installation (with knockouts for cable entry) having Gasket Material shall be Polyurethane and the Gasket shall be internally embedded, Tested at 650°C, with Plastic Mounting Bracket, Din Rail, Mild Steel Flat Iron Clamp, Nuts, Bolts and Washers, with MCB SP 6 Amps, 'B' Curve, 10 KA, complete all as specified and as directed. MAKE: CAPE Electric Model No. TKPS 2518 - 11M or HENSAL cat Pt No. KF 2525B or equivalent SPELSBERG/RITTAL/ SCHNEIDER

S&F in replacement of PVC insulated multistranded copper conductor wire, 1.5 Sqmm 3 Core, round flexible for connection of light fittings, complete all as specified and as directed.

Material and labour for 15 mm thick rendering in cement mortar (1:4) on other than fair face of brick or concrete surface finished even and fair all as specified and directed.

S&F in repairs LED Street Light fitting, of 72 Watt Street Light Luminaire in high pressure die cast aluminium housing with prismatic polycarbonate modular secondary lens optics with integrated constant current electronic driver, top opening driver cover, IP66 ingress protection, impact resistance of IK07 complete all as specified and directed and complying with the following specifications:-. (a) minimum system efficacy 120 lumen/watt (b) CRI not less than 70, (c) THD < 10% (d) Power Factor not less than 0.90 (e) having in built short circuit and surge protection upto 4 kV (f) having 10 KV external surge protection (for 45 watt & above) (g) colour temperature not less than 5700 degree K (h) life not less than 50000 hours of operation Make :SURYA CAT NO- SLE UL 72 IP66 LXN/ HAVELLS CAT NO- ENDURASUNDOWNSL72WLED765PASYBOTG / Philips CAT NO- BRPO32 P LED75 CW SLR,PSU GR SPD or equivalent make specified in tender.

All as per item No 56.00 above but 90 Watt Street Light Luminaire ( SURYA CAT NO- SLE UL 90W IP66 LXN/ HAVELLS CAT NO- ENDURASUNDOWNSL90W LED765PASYBOTG / PHILIPS CAT NO- BRPO33 P LED90 CW SLR, PSU GR SPD

All as per item No 56.00 above but 120 Watt Street Light Luminaire ( SURYA CAT NO- SLE UL 120W IP66 LXN/ HAVELLS CAT NO- ENDURASUNDOWNSL120 WLED765PASYBOTG / PHILIPS CAT NO- BRPO33 P LED120 CW SLR, PSU GR SPD

S&F in repairs LED Flood Light fitting, of 70 Watt Flood Light Luminaire (PHILIPS CAT NO- BVP1281 LED085 CW FG SY5WB 70W V1 / SURYA CAT NO- SLE FL 70W IP66 LMS NEO N/ HAVELLS CAT NO-JETAALBAFLOODLIGHT70W in high pressure die cast aluminium housing with prismatic polycarbonate modular secondary lens optics with integrated constant current electronic driver and toughened glass cover, IP66 grade ingress protection, impact resistance IK07 complete all as specified and directed and complying with the following specifications:-. (a) minimum system efficacy 120 lumen/watt (b) CRI not less than 70, (c) THD < 10% (d) Power factor not less than 0.90 (e) having in built short circuit and surge protection upto 4 kV (f) having 10 KV external surge protection (g) colour temperature not less than 5700 degree K (h) life not less than 50000 hours of operation

All as per item No 59.00 above but 120 Watt Flood Light Luminaire (HAVELLS CAT NO-JETAIRISFL120W LED757APWBLTG/ SURYA CAT NO-SLE FL 120W IP66 LMS NEO N/CGL CAT NO- TFS-504-70-57-60D-HL2-GL-NSG or equivalent make specified in tender.

All as per item No 59.00 above but 150 Watt Flood Light Luminaire( SURYA CAT NO- SLE FL 150W IP66 LMS NEO N / HAVELLS CAT NO- JETAIRISFLS150WLED757PWBLTG/PHILIPS CAT NO- BUP283LED181CW FG SY5NB 150W V1

S&F in repairs LED Highbay luminaire 200 Watt (with system lumen efficacy 130 lumen /watt), circular shape, of various capacity as mentioned under, in high pressure die cast aluminium/LM6 alloy housing with secondary modular lens optics and toughened glass cover with integrated constant current electronic driver, IP66 ingress protection complete all as specified and directed and complying with the following specifications:-. (a) minimum system efficacy 130 lumen/watt (b) CRI not less than 80, (c) THD < 10% (d) Power factor not less than 0.90 (e) having in built short circuit and surge protection upto 5 kV (f) colour temperature not less than 5700 degree K (g) life not less than 50000 hours of operation (Make :SURYA CAT NO- SLE HB 200W COMET NEO-N/ CGL CAT NO- FFL 1315-200-CDL/60-HB-M/ HAVELLS CAT NO- SAUCERGENXADVHBP200WLED757PWBBORL) or equivalent make specified in tender.

S&F LED Bollard light 8W to10W,Oval/Mushroom type luminaire with soft 360 degree light distribution, with IP 65 grade protection, operating voltage 120-280V, with integrated constant current electronic driver incl all fittings and fixtures complete with PCC work incl taking down existing luminaire complete all as specified and directed. (Make :CGL CAT NO- LBLSR 10-WW/HAVELLS CAT NO-CONENX4BL8WLED PSYM857TOPCM/ SURYA CAT NO- SLE BL 10W-FLR650 NX or Equivalent modal in other Makes specified in the tender)

S&F LED Bollard light 9W, inverted pyramid tripod type luminaire with soft 360 degree light distribution, with IP 65 grade protection, operating voltage 120-280V, with integrated constant current electronic driver incl all fittings and fixtures complete with PCC work incl taking down existing luminaire complete all as specified and directed. (Make :CGL CAT NO- LBLSR 10-WW/PHILIPS CAT NO-BCP400LED09DCW PSU GR S1/ SURYA CAT NO- SLE BL 9W-BLK800or Equivalent modal in other Makes specified in the tender)

S&F LED post top luminaire, 30-35 watt, with die cast aluminium spigot, spun aluminium powder lantern type coated top cover, with high power LED, IP 65 grade protection, designed with indirect symmetrical light distribution, with integrated constant current electronic driver incl taking down existing luminaire complete all as specified an directed. (Make : SURYA, CAT NO: SLE PT 30W-ETPP / HAVELLS-CORALPT 35WLED830PSYMTOPC/ PHILIPS CAT NO-BGP200 LED35 CW PSU GR CPC SPD or equivalent model in other makes specified in particular specifications) NOTE: Wire for connection of luminaire shall be measured and paid separately.

S&F LED post top luminaire, 20-30 Watt, with die cast aluminium spigot, spun aluminium powder ,Heritage type coated top cover, with high power LED, IP 65 grade protection, designed with indirect symmetrical light distribution, with integrated constant current electronic driver incl taking down existing luminaire complete all as specified an directed. (Make : SURYA, CAT NO: SLE PT 30W-HARY / CGL-LPTH-20-WW/ JAGUAR CAT NO-LGTP02X030XW or equivalent model in other makes specified in particular specifications) NOTE: Wire for connection of luminaire shall be measured and paid separately.

M&L for replacement of GI Pipe Bracket made out of Galvanised Iron Tubing 32/40mm bore (dia), light grade, 1.50 Metre long fixed with 02 sets of flat iron clamp of size 25mm x 5 mm, with bolts, nuts and washers of suitable size including applying two coats of aluminium paint over a coat of red oxide zinc chrome primer incl taking down existing bracket complete all as specified and as directed by the Engr-in-Charge.

M&L for replacement of Galvanised Steel Tubing Pipe 40mm bore (dia), light grade, length 0.60 mtr having 50 Cm with long Bends, Each for Incoming and Outgoing Cables, grouting in Cement Concrete, complete all as specified and as directed. NOTE : Cement Concrete will be measured and paid for separately under appropriate Item.

Dismantling of broken/dislodged pre-stressed concrete poles / steel tubular poles, of any description including earthwork for removal of concrete foundation, keeping serviceable poles in safe custody for re-use and removal of unserviceable poles from site, complete all as specified and directed.

Supply and fix Steel tubular swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts & screws fixed with MS clamp 40 x 6 mm and 2 set with nut & bolt as specified type 410 SP-31 (9 Meter long) duly painting with two coats of aluminium paint over a coat of red oxide primer on exposed surface and one coat of black bituminous paint on embedded surface incl writing of Pole Numbers etc., and marking of two black & two yellow strips with synthetic enamel paint upto 1.2 Mtr height and making good disturbed surface complete all as specified and directed.

Erecting of serviceable pre-stressed concrete poles/steel tubular poles (Serviceable steel tubular pole/pre-stressed concrete poles obtained from Item No. 34.00 here-in-before), of any description, with cast iron base plate, finial taper plug, bolts, nuts & screws fixed with MS clamp 40 x 6 mm and 2 set with nut & bolt etc, including demolition of existing PCC foundation and making good disturbed surfaces complete all as specified and directed. (NOTE: PCC foundation for installation of pole shall be measured separately)

S&F Astronomical time switch with USB key 2 module 240 Volt AC, DIN mounting type suitable for street light operation, as in repairs, complete all as specified and directed.

S&F Contractor 40 Amps, 3mdule 2 NO+2NC, type1, DIN mounting type suitable for street light operation, as in repairs, complete all as specified and directed.

S&F MCB TPN 63 Amps, 415 Volts, 10 kA, 'C' curve, as in repairs, complete all as specified and directed. (MAKE: L&T, Cat No: BB40630C or equivalent model in LEGRAND / HAGER / SCHNEIDER / INDO ASIAN)

S&F LED flex strip light 5 watt , 45m to 50m length, IP 65, 5watt/metre, any colour including suitable driver and connecting up with three core flexible copper conductor cable of suitable size, as in repairs, complete all as specified and directed. (MAKE : SURYA Cat No SPARKLE ROPE LIGHT/ PHILIPS CAT NO-MARATHON ULTRA YELLOW ROPE LIGHT/WIPRO CAT NO- GARNET 50 MTR LED STRIP LIGHT or equivalent model in other makes specified in tender)

S&F LED Rope light Tri colours in same length of (Orange+ White+ Green) of 6m length each. IP 65,), including suitable driver and connecting up with three core flexible copper conductor cable of suitable size, as in repairs, complete all as specified and directed. (MAKE : SURYA Cat No SPARKLE ROPE LIGHT/ PHILIPS CAT NO- TRICO AC LED STRIP LHEHCIPIN6F135/ WIPRO CAT NO- GARNET 18 MTR TRICOLOUR LED STRIP LIGHT or equivalent model in other makes specified in tender)

S&F LED statue focus light in die cast aluminium housing with high quality toughened glass diffuser IP 65,), including suitable connecting up with three core flexible copper conductor cable of suitable size, as in repairs, complete all as specified and directed. (MAKE : SURYA Cat No SLE BSL 9W MALLOW/ HAVELLS CAT NO- LYCUS LED SPIKE LIGHT LYCUSSP S9W LED 730PSYMBOTG/ JAGUAR CAT NO- LSPK0 5R112SW or equivalent model in other makes specified in tender)

S&F LED Up down wall light in die cast aluminium housing with high quality toughened glass cover IP 65,), including suitable connecting up with three core flexible copper conductor cable of suitable size, as in repairs, complete all as specified and directed. (MAKE : SURYA Cat No SLE WL15W UP-DOWN / HAVELLS CAT NO-C LYCUS LED SPIKE LIGHT LYCUSSP S9W LED 730PSYMLIOWLS15W LED830PSYMTOTG/ JAGUAR CAT NO- 460LL9X2H. NHG or equivalent model in other makes specified in tender)

S&F LED Bulk head light in die cast aluminium housing with high quality toughened glass cover IP 65,), including suitable connecting up with three core flexible copper conductor cable of suitable size, as in repairs, complete all as specified and directed. (MAKE : MAGIK Cat No HWARO12W /PHILIPS CAT NO-VISTA GLOW-WT 110/ CGL CAT NO- CIS-306-10-57-SL-DP-NBK or equivalent model in other makes specified in tender)

S&F LED 2 Head out door wall lights in die cast aluminium housing with high quality toughened up and down of 4Wglass cover IP 65,), including suitable connecting up with three core flexible copper conductor cable of suitable size, as in repairs, complete all as specified and directed. (MAKE : PHILIPS CAT NO- GAMMA 2HEAD WALL LIGHTMODEL NO 581934 or equivalent model in other makes specified in tender)

S&F LED 3 Head out door wall lights in die cast aluminium housing with high quality toughened up down of 7W glass cover IP 65,), including suitable connecting up with three core flexible copper conductor cable of suitable size, as in repairs, complete all as specified and directed. (MAKE : PHILIPS CAT NO- GAMMA 3HEAD WALL LIGHTMODEL NO 581935or equivalent model in other makes specified in tender)

S&F LED Triangular wall washer out door wall lights in die cast aluminium housing with high quality toughened of 9W glass cover IP 65,), including suitable connecting up with three core flexible copper conductor cable of suitable size, as in repairs, complete all as specified and directed. (MAKE : PHILIPS CAT NO- GAMMA 3HEAD WALL LIGHTMODEL NO 581937or equivalent model in other makes specified in tender)

M&L for preparation of old painted surfaces of steel tubular poles above PCC coping including cross arms, brackets, pole box and applying one coat of aluminium paint including cleaning of wild vegetation growth/ trimming of tree branches in the vicinity, writing of poles number with sentensile measure white Paint in Black base on steel tubular pole and two black and two yellow strip upto 1.20 metre height with synthetic enamel paint complete all as specified and directed.

Demolition of broken/damaged PCC coping of steel tubular/PCC pole and removal of debris from site complete all as specified and directed.

Material and labour for PCC (1:4:8) type D-2 using 40 mm graded crushed stone aggregate as in foundations of poles, as mass concrete, complete all as specified and directed.

Material and labour for PCC (1:3:6) type C-2 using 20 mm graded crushed stone aggregate as in plinth cources, string cources, etc., complete including slightly rounded or chamfered for GI tubing post for ait termination rod etc., including using necessary formwork and finishing the exposed surfaces even and smooth without using extra cement complete all as specified and directed.

Material and labour for PCC (1:2:4) type B-1 using 20 mm graded crushed stone aggregate as in coping of poles / pipes / strip alignment etc using necessary formwork and finishing the exposed surfaces even and smooth without using extra cement complete all as specified and directed.

Taking down geysers any type and capacity (25/50 ltrs) from the existing position in wall and removing to stores for repairs, cleaning and re-fixing the same in original position after repairing including electric and water connection, testing etc complete all as directed by Engineer-in-Charge ( Note : Repairs of item shall be measured and paid separately under relevant item).

Supply and fixing in repair Copper heating element tubular steel type element 1500/2000W (ISI Marked) suitable for 25ltrs capacity as per sample after removing the existing defective element complete all as directed by Engineer-in-Charge.

Supply and fixing in repair thermostat switch ISI marked for geysers of 25-50 ltrs capacity of micro gap steam type thermostat SEA and make as per sample approved by Engineer-in-charge, including testing complete all as specified and directed.

Supply and fixing in repair thermostat switch ISI marked for geysers of 25-50 ltrs capacity of micro gap steam type thermostat TSE and make as per sample approved by Engineer-in-charge, including testing complete all as specified and directed.

Supply and fixing in repair thermal cut switch ISI marked for geysers of 25-50 ltrs capacity, make as per sample approved by Engineer-in-charge, including testing complete all as specified and directed.

Supply and fixing in repair thermostat auto cut off switch ISI marked for geysers of 25-50 ltrs capacity, make as per sample approved by Engineer-in-charge, including testing complete all as specified and directed.

Supply and fixing in repair brass apprature plate complete with pluger pipe, bolts, nuts, and rubber ring complete and all connected components for 25 ltrs capacity geysers including testing complete all as per sample directed by Engineer-in-Charge.

Supply and fixing in repair split plate of 22 SWG MS sheet white stove enamelled suitable for bottom cover of 25 ltrs capacity geysers testing complete all as per sample specified and directed by Engineer-in-Charge.

Supply and fixing in repair high density polythene pipe heavy duty confirming to IS 3075, 15mm dia, 600mm long, including brass coupling at each end (weighting not less than 40gms each) one end secured to inlet of geysers and other end to stop cock all complete with connection complete all as specified and directed.

Supply and fix in repair 20Amp Metal clad socket 3 pin (2P+E), complete all as directed Make : L&T cat No MPS220S or equivalent makes specified in tender

Supply and fix in repair 20Amp Metal clad Plug 3 pin (2P+E), complete all as directed Make : L&T cat No MPS220S or equivalent makes specified in tender

Supply and fixing of rubber/PVC gasket to ensure water tightness of 25 Ltr geyser suitable as per sample complete all as specified and directed.

Supply & Fixing in repairs Air release valve/dead weight Valve ISI mark suitable for 25 Ltr cap geyser specified and as directed by Engr-In-Charge.

Supply & Fixing in repairs Non return Valve brass of 15 mm bore after dismantling old unserviceable NRV of any size all as specified and as directed by Engr-In-Charge.

S & F bolts and nuts and washer 15mm dia 75mm to 100mm long with cement concrete (1:2:4) type B1 (using 20mm graded crushed stone aggregate) including taking out old fixing bolt(set of four) from walls complete all as specified and as directed

S&F Mild steel clamp of flat iron of size (25X6mm ) made to shape 100mm long welded with outer casing of geyser to walls with bolts and nuts complete all as directed

S& F in repair copper sheathed heating element 1.5KW complete all as specified and directed.

S & F in repair copper sheathed heating element 2.0KW complete all as specified and directed.

M&L for replacement of electronic driver with input voltage 220 to 240 volts and output voltage suitable for 35W to 120W street light LED luminaire, complete all as specified and directed for the following types and capacities:-. (NOTE: Make of driver shall be as OEM or any other make as specifically approved by GE)

All as per item No 108.00 above but 50 W to 250W flood light luminaire

All as per item No 108.00 but 8 W to 20W bollard

All as per item No 108.00 above but 20W to 40Wpost top lantern

Note: Schedule of credit (SCHEDULE OF CREDIT) amount of Rs ________ mentioned on Page No ____ shall be deducted from the total quoted amount of BOQ.

RAJ ENTERPRISE (BID ID -3475127)

GHOSH ENTERPRISE (BID ID -3475525)

ARJUN DAS VALECHA (BID ID -3478758)

BHASKAR SUPPLY AGENCY (BID ID -3475818)

DEEPAK KHATTAR (BID ID -3478454)

M/S S. K. SARKAR (BID ID -3478491)

DUTTA & DUTTA (BID ID -3478387)

SINHA ENTERPRISE (BID ID -3477240)