Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹23.3 LAccepted-AOC | L-1 | Accepted-AOC Contract value is excluding GST | |
| 2 | L-2₹26.4 L+₹3.1 L (13.1%)Rejected-Finance AT KALINGA VIHAR VIA PATRAPADA DIST KHURDA ODISHA | KHORDHA | ODISHA | 751001 | L-2 | Rejected-Finance Quoted amount excluding GST |
Tender Value
Refer Docs
Closing Date
5 Dec 2022, 5:00 pmClosed
GM(M), E AND M, OCCL, Rasulgarh, Bhubaneswar
Office of GM(M), E AND M, OCCL, Rasulgarh, Bhubaneswar
Refurbishment of twelve nos of Under Sluice Gate no 13 to 24 of left spillway of Hirakud Dam at Hirakud, Sambalpur.
2022_OCCL_83546_1
e-Procurement Notice No.22/OCCL/2022-23 (on-line)
Open Tender
Mechanical Works
Item Rate
121 days
HIRAKUD
Please refer Tender documents.
3 documents required · 3 mandatory
₹11,800
Exempted
Office of GM(M), E AND M, OCCL, Rasulgarh, BBSR
23 May 2023
25 Nov 2022
6 Dec 2022
25 Nov 2022
5 Dec 2022
25 Nov 2022
25 Nov 2022 - 30 Nov 2022
30 Nov 2022
Amount
Separation of Upper Tier & Lower Tier segments of Under Sluice gates inside the gallery. Segments shall be shifted to maintenance workshop by manually operated trolley. All components such as wheels, Axle, Rubber Seal, Nut- Bolts, Joint plate, Connecting Plate etc. shall be dismantled prior to sand blasting of the gate segments. After sand blasting and painting, all the components shall be fitted to the gate segments. After fitting and checking of all components, the gates shall be shifted back to the gate grooves and shall be inserted into the gate grooves. The entire work shall be in turnkey basis as per direction of the Engineer-in-charge.
Painting of D/S side of Gate after blast cleaning process, performed with sand as per requirements and class ‘A’ of IS14177:1994. After blast cleaning, the surface should be cleaned from loose dust and debris by air blast with help of blower. Over the prepared surfaces, two coats of zinc rich primer should be applied to give a total dry film thickness of 70 ± 5 microns followed by two coats of solvent less Yellow Epoxy Paint applied at an interval of 24 hours between each coat. Each coat should give a minimum dry film thickness of 150 ± 5 microns. The total dry film thickness of all the coats including primer coating should not be less than 350 microns as per IS: 14177:1994 including hire charge of compressor, painting equipments, sand, labour, other machinery, scaffolding etc.
ANANTA CONSTRUCTIONS
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .