WELCOME MAINTENANCE TO VARIOUS QUARTERS OF VSV AND MES COLONY AT AF STN TUGHLAKABD AND REPAIRS TO ROOF TREATMENT, STRENGTHENING WORKS AND MISC B/R WORKS AT 7BRD, AF UNDER GE (AF) TUGHLAKABAD

Amount

M&L for preparing old decorated plastered or unplastered surfaces of ceiling by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spot and applying one coat of white wash complete all as specified and as directed by Engr-in-charge.

M&L for preparing of old distempered surfaces of wall, pillasters, cornices etc by washing, rubbing down & stopping etc and applying one coat of oil emulsion distemper complete all as specified and as directed by Engr-in-charge. Note: The rates quoted inclusive for pigments if added. All holes/cracks to be filled with birla putty and making good to old surface

M&L for preparing old distempered surfaces of wall by complete removal of existing treatment and applying two coat of oil emulsion distemper over 1 mm thickness Birla / JK wall putty complete all as specified and as directed by Engr-in-charge.

M&L for removal of old existing treatment of walls surfaces and applying coat of white cement base wall care putty in patches as required and as directed by Engr-in-Charge finished even and smooth with sand paper and applying two coat of exterior weather proof water base emulsion paint (APEX) in white or tinted complete all as specified and as directed by Engr-in-charge. Note:- Quoted rate shall be deemed to be included for work in buildings/structure of any height.

M&L for preparation of old painted wooden surfaces over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed by Engr-in-charge.

M&L for preparation of old painted surfaces of steel and iron work of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed by Engr-in-charge.

S&F in repair 500 Litre capacity of rotational moulded polyethylene water storage tank (Cylindrical vertical with closed tap) hoisted and fixed in position including fittings of GI pipe medium grade and overflow pipe with fittings complete all as specified and as directed by Engr-in-charge.

Description same as per item above but 1000 liter capacity complete all as specified and as directed by Engr-in-charge.

Taking up or down existing steel tubing/PPR pipe and connections including cleaning for refixing or removal to store complete all as specified and as directed by Engr-in-charge for the following sizes:- 15mm dia bore

All as per item No 9 above but 20 mm bore complete all as specified and as directed by Engr-in-charge.

Supply, fixing, jointing and testing galvanized iron tube medium grade with all fittings such as bends, elbow, socket, reducer etc and fixed to wall, ceiling or laid in floors complete all as specified and as directed by Engr-in-charge for the following sizes:- 15mm dia bore

All as per item No 11 above but 20 mm bore complete all as specified and as directed by Engr-in-charge.

S&F 20 mm ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed complete all as specified and as directed by Engr-in-charge.

S&F in repairs fancy type chromium plated cast copper alloy bib taps long shank & cup 15 mm dia bore complete all as specified and as directed by Engr-in-charge. Make - Prayag

S&F in repair PVC PTMT bib tap 15mm dia pipe with crutch or butter fly handle screwed down, screwed for iron pipe or for brass ferrule complete with check nut 15mm bore complete all as specified and as directed by Engr-in-charge. Make - Prayag

S&F in repair 15 mm dia bore stop valve, cast copper alloy, screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipes or for union and fixed complete all as specified and as directed by Engr-in-charge.

S&F in repairs 10 ltrs capacity PVC low level flushing cistern white, ISI marked, make as specified with inlet, float valve and handle including bracket with 32 mm dia PVC pipe 600 mm long complete all as specified and as directed by Engr-in-charge.

S&F in repair vitreous china squatting pan “ORISSA PATTERN” size 580mmx440mm ‘white’ with integral foot rest (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe anti syphonage pipe etc complete all as specified and as directed by Engr-in-charge.

S&F in repair vitreous china wash down water closet pan (pedestal pattern) white (excluding flushing cistern and flush pipe) including connection to drain or outgoing pipe and flush pipe anti syphonage pipe etc complete and making good to floor complete all as specified and as directed by Engr-in-charge.

S&F in repair water closet seat cover, white closed pattern with flat bottom & cover with hinging device complete all as specified and as directed by Engr-in-charge.

S&F Health Faucet with 1.5mtr long SS tube and hook complete all as specified and as directed by Engr-in-charge.

S&F in repair vitreous china wash basin, white, flat back, size 550 mm x 400 mm fixed on and including cast iron cantilever bracket 32 mm dia brass waste coupling and including fixing of tap, waste fitting and union complete all as specified and as directed by Engr-in-charge.

Supply only PVC connection 15 mm dia and 450 mm long with both end brass fly nut complete all as specified and as directed by Engr-in-charge.

Supply and fixed in repair 15 mm dia bore pillar taps cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered ‘Hot’ or “cold’ with long screwed shank and flynuts, screwed for iron pipe and fixed complete all as specified and as directed by Engr-in-charge. Make - Prayag

S&F in repairs 15 mm dia bore cast copper alloy chromium plated fancy type mixer pillar tape for cold & hot water complete all as specified and as directed by Engr-in-charge.

S&F in repair stainless steel kitchen rack plate rack over all size 24" x30" complete all as specified and as directed by Engr-in-charge. Make - Prayag

S&F in repair kitchen sink with drainage board made out of 1mm thick stainless steel with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever bracket and connecting union to pipe over all size 915 mm X 460 mm & bowl size 410 mm X 330 mm X 160 mm complete all as specified and as directed by Engr-in-charge.

S&F in repair brass chromium plated tubular towel rail 20 mm dia D type, 60 cm long between flanges complete all as specified and as directed by Engr-in-charge.

S&F in repair 125 mm fancy type shower roses brass chromium plated with C P arms for15mm bore GI pipe complete all as specified and as directed by Engr-in-charge.

S&F in repair soap dish brass chromium plated fixed to wall with brass chromium plated screw complete all as specified and as directed by Engr-in-charge.

S&F in repair Fancy alumimum powder coated Drapery rod 25 mm dia fancy powder coated including MS bracket, side knob, corner bracket etc complete all as specified and as directed by Engr-in-charge.

Taking down cement plaster including tiles wherever exist on brick or stone wall/floor surfaces including raking out joints, hacking for key and scrubbing down with water complete all as specified and as directed by Engr-in-charge.

M&L for 20 mm granite slab for service counter and platform over and including 15 mm thick screed bed or bedding layer of cement mortar (1:4) laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including making good the edges complete all as specified and as directed.

M&L for glazed ceramic colour tile 300mmx200mmx7mm thick set and jointed in neat cement slurry and pointed in coloured cement on vertical surfaces such as in dado/skirting etc over and including 10 mm thick rendering in cement mortar (1:4) complete all as specified and as directed by Engr-in-charge.

M&L for glazed ceramic colour tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm (300 mmx300mm x 7mm thick) set and jointed in neat cement slurry and pointed in colour cement as in floor over and including 15 mm thick screed bed or bedding layer of cement mortar (1:6) complete all as specified and as directed by Engr-in-charge.

S&F glazed ceramic joint free edge cut coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm (400mmx400mmx8mm thick ) set and jointed in neat cement slurry and pointed in colour cement as in floor over and including 15mm thick screed bed or bedding layer in cement mortar (1:6) complete all as specified and as directed by Engr-in-charge.

Description same as per above item but, as on dado/ skirting incl 10 mm thick rendering in CM (1:4) complete all as specified and as directed by Engr-in-charge.

S&F vitrified ceramic coloured tiles of 7 to 8 mm thick (square/rectangular) area of each tile exc 0.18 Sqm but n.exc 0.38 Sqm in floors, including 15 mm thick screed in CM (1:6) complete all as specified and as directed by Engr-in-charge.

S&F vitrified ceramic coloured tiles of 7 to 8 mm thick (square/rectangular) area of each tile exc 0.18 Sqm but n.exc 0.38 Sqm on vertical surfaces such as skirtings including 10 mm thick rendering etc complete all as specified and as directed by Engr-in-charge.

S&F of corner glass shelf 300 mm complete all as specified and as directed by Engr-in-charge. Make: prayag

Demolition of Cement concrete as in sunken (unreinforced) of any description and in any position not otherwise specifically provided complete all as specified and as directed by Engr-in-charge.

M&L for rendering 15 mm thick wall plaster in CM (1:3) mixed with water proofing compound complete all as specified and as directed by Engr-in-charge.

M&L for wire brushing and cleaning top surface of tiles, cement concrete, including flashings and junction of parapets etc and surface painting with a layer of blown grade bitumen of 85/25 penetration grade @ 1.70 Kg/Sqm and lightly tampered to the surface of roof or sunken etc complete all as specified and as directed by Engr-in-charge.

M&L for 40 cm or less lime concrete with lime mortar (1:2) mix and 40 mm graded brick coarse aggregate in sub floors as in sunken complete all as specified and as directed by Engr-in-charge.

Taking down chowkats or frame with shutter (without taking out shutter from the frame) not exceeding 1.50 Sqm each as doors, windows & ventilators etc. and removal from site complete all as specified and as directed by Engr-in-charge.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specification & drawing and complete all as specified and as directed by Engr-in-charge.

S&F for 30 mm thick factory made solid panel PVC door shutter confirming to criteria of testing as per IS : 4020, consisting of frame made out of MS tube of 19 guage thickness & size 19x19mm for stiles and 15x15mm for top & bottom rails MS frames shall have a coat of red oxide primer of approved make and shall be covered with 5mm thick heat moulded PVC `C' channel of size 30x50mm forming styles and 5mm thick 75mm wide PVC sheets for top rail lock rail and bottom rail on either side and 10mm (5mmx2) thick 20mm wide cross PVC sheet as gap insert for top rail and bottom rail panelling of 5 mm thick PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rail with 30 mm wide x 5 mm thick PVC sheet beading on either side and joined together with solvent cement, adhesive and an additional 5 mm thick PVC strip of 20 mm width is to be struck on the interior side of 'C' channel using PVC solvent adhesive complete as per manufacturers specifications & drawings complete all as specified and as directed by Engr-in-charge.

M&L for PCC (1:3:6) type C-1 using 20 mm graded stone aggregate for filling in bed block of hold fast etc complete all as specified and as directed by Engr-in-charge.

S&F Aluminium anodised 100 mm long Butt hinges with galvanised mild steel screws complete all as specified and as directed by Engr-in-charge.

S&F Aliminium anodised barrel tower bolts, 150 mm long complete all as specified and as directed by Engr-in-charge.

S&F Aluminium anodised handles, cast type anodised 125 mm long complete all as specified and as directed by Engr-in-charge.

Taking down chowkhats or frame exc 1.5 Sqm but n.exc 4 Sqm each with shutters (W/out taking off shutters from the frames) complete all as specified and as directed by Engr-in-charge.

S&F Pressed steel frames of size 125 X 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, (thickness of sheet shall be 1.25mm) and making good the wall with plaster in CM (1:6) complete all as specified and as directed by Engr-in-charge.

S&F for pressed steel frames of size 105 X 60 mm for doors with one or more rebates including necessary fixing lugs hinges, locks strike plate etc, (thickness of sheet shall be 1.25mm) and making good the wall with plaster in CM (1:6) complete all as specified and as directed by Engr-in-charge.

S&F for pressed steel frames of size 75 X 60 mm for Cuboard frames with one or more rebates including necessary fixing lugs hinges, locks strike plate etc (thickness of sheet shall be 1.25mm) and making good the wall with plaster in CM (1:6) complete all as specified and as directed by Engr-in-charge.

S&F rolled section framed work for door/window chowkhats made out of mild steel angle iron of any size including necessary cutting welding etc complete all as specified and as directed by Engr-in-charge.

S&F 2nd class HW 35mm thick local made panelled shutters with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and style as per IS-1003 (Pt-I) kiln seasoned and chemically pressure treated complete all as specified and as directed by Engr-in-charge.

S&F 35 mm thick glazed skeleton shutters open rebated and prepared to receive guage etc (without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc and fitted to chowkats complete all as specified and as directed by Engr-in-charge.

S&F of Continuous (piano) hinges, stainless steel, bright finish complete all as specified and as directed by Engr-in-charge.

S&F of 30 mm thick flush shutter, ISI marked, solid core construction with block board core and plywood face panels commercial face panels, commercial type on both sides complete all as specified and as directed by Engr-in-charge.

S&F of 19 mm thick medium density flat pressed three layer particle board extension grade quality with 5 mm thick teak wood edging on one side bottom and top and other side 10 mm teak wood edging with rebate suitable for cupboard shutters complete all as specified and as directed by Engr-in-charge.

S&F of in repair galvanised mild steel wire cloth 0.36 mm nominal dia of wire and avarage width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staple complete all as specified and as directed by Engr-in-charge.

S&F of 300 mm size mild steel ordinary rat rail rod pattern springs including roller and roller plate complete all as specified and as directed by Engr-in-charge.

S&F of 300 mm long mild steel sliding bolt plate type stove enamelled black with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts four on bolt plate and two on staple plate and fixed complete all as specified and as directed by Engr-in-charge.

S&F of 200 mm long mild steel barrel tower bolts, ISI market stove enamelled block with bright bolt and fixed complete all as specified and as directed by Engr-in-charge.

S&F of 150mm long oval type mild steel pressed handles, ISI marked stove enamelled black complete all as 150mm size complete all as specified and as directed by Engr-in-charge.

S&F of 100 mm long aluminium anodised hasp and staple safety tape including bolts to hinge plate and fixed with screws complete all as specified and as directed by Engr-in-charge.

S&F factory made Steel windows 1.25 mm thick box type (primer coated) ERW hollow P sections of size 60mm X 25mm including grill using 10 mm bar double riveted both gauze and glass shutter comprised gauged glazed skeleton shutters ERW section 50mm X 20mm and 1mm thick with two openable leafs consisting 2 nos sash bar of T section 20mm X 3mm complete welded to frame with one vertical mullion of ERW box type T section of size 60mm X 25mm and 1.25 mm thick including cutting holes and making good dismantled portion in PCC 1:2:4 type B1 four numbers of each window including following fittings welded to frame shutter :- (a) Hold fast, 150 mm long of 12mmX3mm made to shape 04 nos per window (b) handle of Z section 20mmX25mm, 100 mm long -per leaf (c) Mild steel tower bolt 150mm long - 02 Nos per leaf (d) Z section 20mmX25mm, 100 mm long stopper -01 nos per leaf (e) Cleat 55mm long of hollow square 15mm X20mmX63mm welded to hinge -01 Nos per Leaf (f) MS pintal hinges of size 75mmX12mm- 02 Nos per leaf including stainless steel wire cloth, 0.25mm to 0.36mm nominal dia of wire and average width of aperture 1.40mm to 2mm and fixed with aluminium wire staples and glass pan 3mm thick fixed with MS pin and oil putty including two coats of synthetic enamel paint complete all as specified and as directed by Engr-in-charge. NOTE :- (i) During fixing of window surface shall be make good in plumb with existing finishes like cement plaster, similiar wall tile, floor tile etc and as per site requirement .

S&F in repair steel ventilators with top hung shutters including hinges steel peg stay complete all as specified and as directed by Engr-in-charge.

M&L for sheet glass ordinary quality 3.00 mm thick and glazing with oil putty in square n exc 0.50 Sqm in each panes fixed to steel or wooden window frames complete all as specified and as directed by Engr-in-charge.

All as per item No 71 above but pin head type, figured glass complete all as specified and as directed by Engr-in-charge.

M&L for preparation of new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint (for steel surfaces) complete all as specified and as directed by Engr-in-charge.

M&L for preparing wood or wood based new surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and as directed by Engr-in-charge.

Dismantling brick tiles or terracing tiles, single layer on roofs complete all as specified and as directed by Engr-in-charge.

Demolition of mud in roofs any thickness, including plastering, leeping plaster and removing from MD land complete all as specified and as directed by Engr-in-charge.

M&L for applying water proofing treatment with APP modified polymeric membrane centre core of 100 micron HM HDPE, weight not less than 3 Kg/Sqm and clear thickness of membrane not less than 3 mm, on newly prepared surface with torch application as per manufacturer instruction complete all as specified and as directed by Engr-in-charge with the following description :- (a) Apply evenly a coat of bituminous primer conforming to IS -3384 @ 0.40 Kg/Sqm. (b) A coat of bonding bitumen confirming to IS -702 of grade 85/25 @ 1.20 Kg/Sqm as a IInd course. (c) Laying of APP modified polymeric membrane as a IIIrd course. (d) A coat of bonding bitumen confirming to IS -702 of grade 85/25 @ 1.20 Kg/Sqm as a forth course.

M&L for providing cement concrete in roof or mud stops using (1:2:4) type B-1 by using 20 mm graded stone aggregate rounded or chamfered on edges complete all as specified and as directed by Engr-in-charge.

Surface preparation by removal existing roof treatment of tar felt treatment/APP Membrane/PCC/Plaster/ and all foreign material such as grass roots dust etc Removing existing roof treatment and preparing surfaces to the entire satisfaction of Engr-in Charge /GE including taking down existing plaster, cleaning of all foreign material such as grass roots dust etc and roughening the concrete surfaces by wire brushes and washing down to remove dust etc. flushing at junction of parapets complete and removing the dust/mud to the places where directed by Engr-in-Charge.

M&L for plain cement concrete (1:2:4) type B1 using 12.5 mm graded stone aggregate as in roof for maint, the uniform slope etc any thickness at any height and in any position complete all as specified and as directed by Engr-in-charge.

M&L for 10 mm thick screed bed or bedding layer in cement mortar 1:3 set and jointed in neat cement slurry and on brick work or concrete surfaces finished even and smooth without using extra cement using waterproofing compound complete all as specified and as directed by Engr-in-charge. Note :-WPC measured and paid separately.

Supply only water proofing compound complete all as specified and as directed by Engr-in-charge.

M&L for the old roof by making the surface clean thoroughly wire brushed washed, dried up and cleaned of all foreign matter and dust and applying water based UV Resistant elastomeric PU liquid membrane solution minimum two coats over primer coat, as required on ground in patches on area of old broken App membrane/ plastered surfaces using roller as per the manufactures instructions complete all as specified and as directed by Engr-in-charge. Make : Shali urethane BTD of STP or equivalent. Note:- Work to be Carried out by authorised applicator as per manufacturer’s instructions.

Demolition of brick work build in cement mortar complete all as specified and as directed by Engr-in-charge.

M&L for brick work with sub class 'B' bricks, straight of curved on plan exceeding 6M mean radius built in cement mortar (1:6) complete including demolition of brick work built in cement mortar complete all as specified and as directed by Engr-in-charge.

Taking down of cement plaster on brick or stone walls etc. including racking out joints, hacking for key, scrubbing down with water etc. complete all as specified and as directed by Engr-in-charge.

M&L for 10mm thick rendering in cement mortar 1:6 on fair faces of concrete surfaces as on brick work finished even and smooth without using extra cement complete all as specified and as directed by Engr-in-charge.

M&L for 15 mm thick cement plaster with ready mix plaster (as per manufaturer's instruction) on fair faces of brick wall or concrete surfaces finished even and smooth, (without using extra cement) complete all as specified and as directed by Engr-in-charge. Note:- 1. Make of readymix plaster shall be Birla Aerocon/Ultratech readiplast/ACC Accoplast / Fosroc Chemical (India) Pvt Ltd Renderoc and as approved by GE) 2. The ready mix plaster shall be procured directly from the manufacturer or their authorised dealer. 3 The contractor shall produced original purchase voucher alongwith test certificate of ready mix plaster by manufacturer or their authorised dealer while claiming RAR/ Final Bill.

M&L for 10mm thick rendering in cement mortar (1:3) on fair faces of concrete surfaces as in ceilings fair and even complete all as specified and as directed by Engr-in-charge.

M&L for two coats of distemper oil emulsion to newly plastered wall surfaces including preparation of surface including putty on plaster surface complete all as specified and as directed by Engr-in-charge.

M&L for preparation of new plaster surface of ceiling and applying three coats of white wash complete all as specified and as directed by Engr-in-charge.

M&L for two coats of cement based paint over a coat of white wash on new surfaces of walls including preparation of surfaces complete all as specified and as directed by Engr-in-charge.

Demolition of cement concrete in ground floors and pavings not exceeding 15 cm thickness below or above ground level complete all as specified and directed by Engr-in-Charge.

M&L for 75 mm thick PCC (1:3:6) type C-2 using 40 mm graded stone aggregate as in plinth protection complete all as specified and as directed by Engr-in-charge.

M&L for 100 mm thick PCC (1:4:8) type D2 using 40mm graded stone aggregate finishing the concrete surface even and fair complete all as specified and as directed by Engr-in-charge.

M&L for precast machine pressed concrete interlocking paver blocks any shape and size conforming to IS 15658-2006 of 60 mm thickness, M-35 grade with grey cement and pigment laid over and including 50 mm thick sand filling complete all as specified and as directed by Engr-in-charge.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed by Engr-in-charge.

M&L for Use and waste form work to landing & chajjas including edges for rough finished surfaces of concrete flat complete all as specified and as directed by Engr-in-charge.

M&L for providing reinforced cement concrete (1:2:4), type B1 using 20 mm graded stone aggregate as in chajjas and landing complete all as specified and as directed by Engr-in-charge.

S&F MS TMT bar of 10 mm dia and over cut to length bent to shape required including cranking bending etc complete & binding with annealed MS wire not less than 0.9mm dia complete all as specified and as directed by Engr-in-charge.

M&L for making good broken edges of chajjas slabs, facing, fins etc in patches area not exceeding 1 Sqm of each patch, height upto 15 metre, with 15mm thick cement plaster and sand mortar (1:3) or with PCC (1:2:4) type B-0, with necessary form work/scaffolding, finished the surface even and smooth without using extra cement complete all as specified and as directed by Engr-in-charge.

Taking down rain water pipes of (any size or pattern) including all fittings, heads, shoes, bends, swan necks etc. including cleaning or refixing or removal to store etc complete all as specified and as directed by Engr-in-charge.

S&F 110mm bore PVC (SWR) rain water pipes of single socketed in any length with rubber ring joints, jointed with solvent fixed to wall with matching PVC SWR rings including cutting holes and making good the disturbed portion with PCC (1:2:4), type B0 complete all as specified and as directed by Engr-in-charge.

M&L for gunniting to RCC works in column beams, slabs, chajja, facia, landing, balconies etc by removing/ dismantling of RCC (loose concrete) and cutting of steel bar including plaster cleaning of surfaces with wire brushes and applying epoxy, paint anti corrosive coating of minimum 40-50 microns thick with sikatop Armatec 108 or Colusal VL of MC Bauchemie to rusted steel reinforcement after removing cleaning all rust and supply and fixing welded steel wire mesh 75mm x75mm with 4mm dia steel wire as facies/drops and similar works etc and epoxy based or other equivalent suitable bonding against treatment to be carried out on old concrete surface with Sikadur 32 of Sikka. Nito bond EP of fosroc or equivalent (as per manufacturers instruction) to bond old and new concrete mixing @ 2% by weight of cement polycrete and providing gunniting with a minimum pressure of 2 to 2.5 Kg sqcm and applying upto 50 mm thick gunniting in cement mortar (1:2) (one part of cement and two part of ghaghar sand) using ordinary port land cement of 43 grade over wherever required, complete all as specified and directed by Engineer-in-Charge. Note:-(i) After placing the additional reinforcement all concrete surface shall be thoroughly scrubbing with. (ii) Additional reinforced TMT bars where incorporated in work and including 20mm thick cement plaster in (1:4). (iii) Work to be carried out as in patches as directed by Engr-in-charge. (iv) Rate for steel scaffolding as directed to be included in quoted rate. (v) All demolished material removed from MOD land completely.

Dismantling expanded metal of any thickness or mesh, fixed with steel fillets of weight not exc 4 Kg per Sqm, complete all as specified and as directed by Engr-in-charge.

S&F welded steel wire fabric to steel section at any position complete all as specified and as directed by Engr-in-charge.

S&F in repair MS rolled section, MS Pipe, MS Square/circular tube, framed work as in balcony railing doors, railing, chajja, gates or other section fixed with fastener complete all as specified and as directed by Engr-in-charge. Note: Work to be carried out upto 12 Mtr height.

S&F in repairs 6mm thick multi wall clear/bronze/green/ blue polycarbonate sheet with EPDM rubber gasket, silicon sealants, cold forged fasteners etc on steel structure complete all as specified and as directed by Engr-in-charge.

M&L for cutting holes into or through brick wall built in cement mortar and making good in cement mortar (1:3) or cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate as required of superficial area n. exc 150 sq cm complete all as specified and as directed by Engr-in-charge.

S&F in replacement for Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of sheet complete all as specified and as directed by Engr-in-charge.

M&L For Disconnecting existing tanks size 500 to 1000 lit, setting aside etc. and required reconnecting and re-fixing in position without any leakage complete all as specified and as directed by Engr-in-charge.

Taking up or down steel tubing and connection of any size including cleaning with all fitting and refixed complete to walls ceiling or laid in floors complete all as specified and as directed by Engr-in-charge.

M/S AKASH CONSTRUCTION COMPANY

ANAND ENTERPRISES