REPAIR/MAINT OF INTERNAL ROAD OF ILP-1A AND OFFRS ACCN AREA IN THE AREA OF AGE B/R-I UNDER GE PANAGARH

Amount

Surface excavation n-exc 30 cm deep and averaging 15cm deep and getting out soft and loose soil , complete all as specified and as directed.

Removing excavated soil to a distance not exc.50m and depositing where directed at a level not exc. 1.5 m above the starting point ,complete all as specified and as directed.

M&L for moorum or red bajri filling in layer of 10cm thick compact thickness spred levelled and rolled and consolidated with 10-12 ton power roller including watering as in road side berms complete all as specified and directed.

M&L for 7.5cm thick(compacted thickness) WBM, with coarse aggregates (basalt type of aggregate) of grading 2 (63 to 40mm size) or of grading 3 (50 to 20mm size), spread, rolled and consolidated to gradient and camber required with preparing unsurfaced WBM by brushing with wire brushes for removing mud etc, sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc complete all as specified and as directed.

Scarifying or picking gravelled, macadam or bituminous macadam surfaces exc 50 mm and n exc 100 mm deep, in area not exc 400 sqm complete all as specified and as directed.

Repair to pot hole any depth, n-exc 1 sqm each including sweeping free from dust and mud or water ,scoring sunken surfaces in road etc cutting around edges to at least 25mm in depth macking good by applying tack coat @ 5kg per 10 sqm,putting in premixed bitumen macadam, well rammed and sealed with binder 9.8kg /sqm,binded with 0.09cum of stone chipping 6.3mm size and again well rammed (including supply of premixd macadam,binder and chippings)depth of pot holes exc 30mm complete all as specified and directed.

M&L for preparation of existing black top surfaces by brushing with wire brushes for removing caked mud, sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dust or dirt etc. complete all as specified and as directed.

M&L for applying evenly a priming/tack coat with bituminus primer @10kg/10sqm using paving bitumen complete all as specified and as directed

M&L for applying evenly a priming/tack coat with bituminus primer @5kg/10 sqm using paving bitumen complete all as specified and as directed

M&L for bituminous premix semi-dense asphaltic concrete 40 mm consolidated thickness with 5.5% binder content (Paving bitumen any penetration) by weight of total mix (Design mix), by means of self propelled mechanical spreader/paver, rolled and compacted to required camber and gradient by using mechanical power road roller 8 to 10 tonne capacity complete all as specified and and as directed.

M&L for premixed bituminous macadam 50 mm thick over primed surface of road using paving bitumen any penetration,laid/rolled and compacted to required gradient and camber (consolidated thickness 75mm or less) . Binder contents of premixed macadam shall be 4% by weight of total mix complete all as specified and as directed.

Supply and fixing in repair Solar cat eyes made of Aluminium Alloy shell of size 125 X 125 X 25 mm (including shank 60 mm ) both side reflector, battery : 1.2 V 1600 MA, rechargeable Ni CD Battery , Solarpane: 0.3 Wlight source : 6 ps super bright LEDs, LED colours : yellow, red, green and blue working time : 10 hours (flushing mode) after fully charged , waterproof grade : IP >67, bearable weight : over 10 tons and to be fixed with epoxy resin adhesive after cleaning the road surface complete all as specified and directed .

Supply and fix Solar Road Studs aluminium alloy and polycarbonate size 125 mm X 125 mm X 20 mm 6 LED with stem in replacement , complete all as specified and directed .

S & F road safety convex mirror 80 cm dia with stand fixing on ground surfaces using pcc 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in mass cement concrete for foundation filling complete all as specified and as directed.

Supply and fixing for Delinators ABS body fitted with 02 Nos 100 mm dia highly reflective reflectors made out of PMMA and mounted on MS Pipe of 50 mm dia 16 gauge, 900 mm long duly powder coated with anti rust & anti theft steel net in red/white or yellow/white colour combination fixed in position, complete in PCC (1:2:4) type B1 (using 20 mm graded stone aggregate) in foudation concrete including earth work in excavation in soft/loose soil as in post holes, removal of soil, complete all as specified and as directed

M&L for 2mm thick, white/yellow hot thermoplastic road marking paint conforming to BS 3262 with 20 % glass beds (inter mixed) applied with manually operted machine suitable for hot application at desired temperture, painting as in strips (continuos or breaking) complete all as specified and as directed.

M/s Baba kshatrapal Labour Contract And Construction Co-Operative Society Ltd

M/S MODERN CONSTRUCTION

NATIONAL CONSTRUCTION CO

ANIMA ENTERPRISE

M/S AJIT KUMAR KONAR AND SUBHAS CHANDRA KONAR

BABY ENGINEERING ELECTRICAL MECHANICAL STORES

rahul enterprise