SPECIAL REPAIRS TO FLOOR, JOINERY AND ROOF OF QTR NO P-84/5 AND P-84/7 AT AJAY BAUGH, MINNIEBAY, PORT BLAIR

Amount

Demolition of reinforced cement concrete of any description and in any position not otherwise specially provided for.

Dismantling of plain or corrugated steel sheeting any gauge thickness or similar pattern roof coverings complete all as specified

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as manufacturers instruction and as directed.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as in ridges, hips, valley gutter, drip, and straight flashing all as specified and as directed.

S & F Mild Steel work as in Tubular Trusses, Posts etc including special shaped washer etc complete using ERW or induction butt welded tubes confirming to IS - 1161, Grade St - 240, Medium Grade of any dia complete all as specified and as directed.

M&L Roof trusses (framed), trussed, purlings, crane gantries, rails and fastenings and heavy bracket framing(Beam,tee,angle,Channel or flat sections) including distance pieces, cleats etc complete all as specified and as directed..

S & F Plates ( plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment confirming to Fe-410 W (Grade E-250) quality A complete all as specified and as directed..

S & F Mild steel screw bolts (machine made) 5 to 10 mm dia with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm but n.exc. 10 cm long complete all as specified and as directed

S&F aluminium flat as wind tie fixed with 50mm / 75mm aluminium self tapping screws complete all as specified and as directed.

M & L for providing cement concrete type B1 (1:2:4) using 20 mm graded stone aggregate as in copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed

M&L for preparing new steel or iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed..

S&F in repair Rotational moulded polyethylene water storage tanks of 1000 ltrs (cylindrical vertical with closed top) hoisted and fixed in position all as specified complete.

S&F in gun metal gate valves with iron wheel head screwed both ends for iron pipe of dia 25mm complete all as specified and as directed..

S&F CPVC ball valve / gate valve of 25 mm dia all as specified and as directed complete all as specified and as directed.

S&F Ball brass valve high pressure of polyethylene float and fly nut complete screwed for iron pipe and fixed, cast copper alloy with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule etc and fixed of 25mm bore complete all as specified and as directed..

M&L for coloured non-skid /matt finish ceramic tiles 7 to 8 mm thick exc. 0.06 Sqm but n.exc 0.11sqm area of each tiles in floor/ steps etc set and jointed in neat cement slurry and pointed in coloured cement to match as in floor over and including 15mm thick screed bed in CM (1:4) complete all as specified and as directed.

M&L for glazed ceramic tiles 450 x 300 x 7-10 mm thick in vertical surface set and jointed in neat cement slurry and pointed in white or colour cement to match over 10mm thick backing in cement mortar (1:3) all as specified and directed

M&L for joint free coloured ceramic tiles edge to edge joint 7 to 8 mm thick area of each tiles exc 0.18 Sqm but n exc 0.38 sqm in floors etc colour as approved set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM (1:4) all as specified.

M&L for ceramic tiles edge to edge joint 7 to 8 mm thick on vertical surfaces set and jointed in neat cement slurry and pointed in coloured cement to match tiles including 10 mm thick backing plaster in CM (1:3) all as specified and directed.

Demolition of cement concrete including tiles and mortar if any in floors and pavings n exc 15 cm thickness (above or below GL) all as specified and directed

M & L for PCC 1:3:6 , Type C-2, using 40mm graded stone aggregate as in sunken floor complete all as specified and as directed.

M & L for applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sq.m including cleaning surfaces complete all as specified and as directed.

M & L for rendering 15 mm thick in cement mortar 1:3 on concrete or brick masonry surfaces including mixing water proofing compound as per manufacturers instructions and finishing the top surface even and fair complete all as specified and as directed. Note: Water proofing compound will be measured and paid separately.

M & L for 25 mm thick, PCC 1:2:4, Type B-0, using 12.5mm graded stone aggregate as in sub base for flooring/leveling coarse, sunken floor etc complete all as specified and as directed.

Demolition of Precast Concrete work/ precast concrete block built in Cement Mortar including all quoins arches pillars etc complete all as specified and as directed.

M&L precast cement concrete block masonry with solid block, exc 10cm in width in PCC type C-1, 1:3:6 (using 20mm graded stone aggregate) set in CM (1:6) all as specified.

S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and as directed.

Demolition of tiles of any description or thickness in floor, hearth or wall including cement mortar laid bedded and pointed in any mortar , removing debris off the premises complete all as specified and as directed.

M&L Granite (of any type) 16 to 20 mm thick machine cut fixed on slab, window cill etc , bedded & jointed with grey cement slurry & pointed with white cement with admixture of pigment to match the shade of granite stone including cutting, moulding & polishing over and including 20 mm thick screed in CM (1:4) complete all as specified and as directed.

M & L for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and as directed.

Taking down Cement Plaster of any description on brick or stone walls or concrete surfaces including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed..

M & L for rendering 5 mm thick in cement mortar 1:4 over a backing coat of 10mm thick in CM 1:6(Total 15 mm thick) on concrete or brick masonry surfaces including mixing water proofing compound as per manufacturers instructions and finishing the top surface even and fair complete all as specified and as directed. Note: Water proofing compound will be measured and paid separately.

Supply only Integral water proofing compound.

M&L for preparation of newly plastered wall surfaces and applying two coats of acrylic emulsion based premium quality exterior antifungal paint over a coat of alkali resistant primer all as per manufacturer's instructions complete all as specified and as directed

M & L for rendering to concrete or block masonry surfaces or surfaces other than fair faces of brick surfaces, 10mm thick in Cement Mortar 1:6, surfaces finished even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering 5mm thick in CM (1:3) on ceiling surfaces finished even & smooth without using extra cement complete all as specified and as directed.

M&L for preparing newly plastered surfaces of wall and applying two coats of oil emulsion distemper over a coat of 3 mm wall putty and primer complete all as specified and as directed.

M&L for preparing newly plastered surfaces of ceiling and applying two coats of oil emulsion distemper over a coat of 3 mm wall putty and primer complete all as specified and as directed.

M & L for complete removal of existing treatment and preparation of plastered wall surfaces and applying two coats of acrylic emulsion based premium quality finish exterior antifungal paint over a coat of alkali resistant primer all as per manufacturer's instructions complete all as specified and as directed

Taking down Steel / CPVC tubing 15 mm dia and connections complete all as specified and as directed

All as per item No 41 above but 20 mm dia

All as per item No 41 above but 25 mm dia

Supply and laying of CPVC pipes 20 mm outer diameter SDR 11 &plain CPVC SDR 11with all special fittings on walls /ceilings or laying in floors complete all as specified.

Supply and laying of CPVC pipes 25mm outer diameter SDR 11 &plain CPVC SDR 11 with all special fittings on walls /ceilings or laying in floors complete all as specified.

S&F 20mm outer dia CPVC Male Brass Threaded Adaptor (MTA/MBTA) complete all as specified and as directed

S&F 25 mm outer dia CPVCMale Brass Threaded Adaptor (MTA/MBTA)complete all as specified and as directed

S&F 20 mm outer dia CPVC pipes brass Elbow complete all as specified and as directed

S&F 20mm outer dia CPVC pipes brass Elbow (3/4 X1/2) complete all as specified and as directed

S&F 20mm outer dia CPVC female brass adaptor (FTA/FBTA) complete all as specified and as directed

S&F 25 mm outer dia CPVC female brass adaptor (FTA/FBTA) complete all as specified and as directed

S&F 32mm outer dia CPVC female brass adaptor (FTA/FBTA) complete all as specified and as directed

S&F 20 mm outer dia Brass Tee complete all as specified and as directed

S&F 32 mm outer dia tank Adaptor complete all as specified and as directed

S&F 25 mm outer dia tank Adaptor complete all as specified and as directed

S&F 20mm outer dia union complete all as specified and as directed

M&L for Cutting chases in concrete block walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 for concealed water tubing etc., and making good, cutting not ecx 10 cm girth complete all as specified and as directed

M&L for removing loose and broken concrete/ masonry surface by chiseling/ mechanically etc from the roof slab, column, beam and similar structural members cutting edges, cleaning the dismantled portion with wire brush etc to make the reinforcement naked and remove dust, dirt and other foreign particle etc and removing to debris 50 Mtr from site complete all as specified and as directed

M/L for applying one coat of epoxy bonding coat as per manufacture's instruction to bind with old concrete / wall surfaces of soffit of slab, column, beam and similar structural members for new cement surface complete all as specified and as directed

M&L for applying polymer modified cement mortar rendering 15mm average thick in CM 1:3 on concrete surface duly mixing polymer modifier Nitobond AR complete finished even and smooth without using extra cement all as specified and as per manufacturer's instructions complete all as specified and as directed.

M & L for complete removel of existing treatment on wall & finishing the surface with wall care putty & applying two coat of oil bound distemper along with primer complete all as specified and as directed

M & L for complete removal of existing treatment on ceiling and applying two coats of oil emulsion distemper over a coat of wall putty and primer all as specified & directed

M&L for preparation of old wooden surfaces exc. 10cm width and girth and applying one coat of synthetic enamel paint, all as specified.

M&L for preparation of old steel surfaces exc. 10cm width and girth and applying one coat of synthetic enamel paint, all as specified.

Taking down chowkats or frames not exceeding 1.5 Sqm (with shutters &grill (if fixed) without taking off shutters from the frame) complete all as specified and as directed .

Taking down chowkats or frames exc 1.5 Sqm and not exceeding 4 Sqm (with shutters and grill (if fixed) without taking off shutters from the frame) complete all as specified and as directed

S&F Solid PVC Door frame of size 50mm x 47mm made out of 5mm rudraksh colour PVC sheet reinforced with MS square tube, in opening complete all as specified and as directed

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Paneling of rudraksh colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement in the frame at site as per specification & drawing complete all as specified and as directed

S&F Anodized Aluminium frames for Partition, Door, Windows ,sliding shutters and Ventilators with one or more rebates inch jointing cleat for fixing etc and aluminium anodized skelton windows & ventilator shutter fixed with glass or gauge, side hung type without sash bars using standard aluminium section incl necessary Aluminium grill, jointing cleats, glazing clips, rubber packing anodised aluminium snap beadings screws, anodised aluminium fittings such as handles stainless steel adjustable friction stay hinges etc complete all as specified incl aluminium grills fixed to window frame aluminium anodised wire cloth fixed to aluminium frame all as specified and directed NOTE: (i) Payment under this item will be make only for the cost of aluminium section. However unit rate quoted shall deemed to include cost of rubber beading, fittings such as handles, SS friction stay hinges and fixing of 5mm thick glass etc complete all as specified and as directed. (ii) Supply only 5mm thick sheet glass and aluminium wire cloth be measured and paid separately. (iii) Weight of aluminium handle & SS hinges shall not be accounted for payment purpose .

Supply only 4.8 mm Plain glass ordinary quality ,in square exc 0.5 sqm each complete all as specified and as directed .

Supply only Aluminium anodised XPM 1.50mm x3 .00mm size for mosquito proofing 22 gauge thick complete all as specified and as directed.

Supply only Figured glass 5 mm,pin head type and glazing with oil putty in squares n exc 0.5 sqm in each pane complete all as specified and as directed .

S& F Aluminium anodised XPM 1.50mm x 3.00mmsize for mosquito proofing 22gauge thick complete all as specified and as directed.

S & F butt hinges of stainless steel 100 mm long ISI marked fixed with brass screws complete all as specified and as directed

S & F second class hard wood, plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue, pinned at joints complete all as specified and directed.

S&F 2nd class hard wood plain framed paneled shutters (any number of panels), 35mm thick with panels of plywood flats complete all as specified and directed.

S & F second class hard wood 35 mm thick glazed and skeleton shutters open rebated and prepared to receive glass, gauge etc divided in to squares with plain, chamfered or rounded, mitred and rebated sash bars fitted with cut and mitred beads for securing glass etc complete all as specified and as directed.

M&L for preparation of new wood/wood based surfaces of exc. 10cm width or girth of any description and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed

M&L Second class hard wood clean sawn in scantlings framed and fixed complete all as specified and as directed

S&F Aluminium anodised sliding door bolts 250 mm long with hasp and staple complete all as specified and as directed .

S&F Aluminium anodised sliding door bolts 300mm long with hasp and staple complete all as specified and as directed

S&F aluminium anodised barrel tower bolt of extruded section 150mm long complete all as specified and as directed .

S&F extruded aluminium alloy handle fabricated type anodised 100mm long complete all as specified and as directed .

S&F extruded aluminium alloy handle fabricated type anodised 150mm long complete all as specified and as directed .

S & F butt hinges of stainless steel 150 mm long ISI marked fixed with brass screws complete all as specified and as directed

S & F mild steel medium weight butt hinges of 50 mm size fixed all as specified and as directed

S&F in repair stainless steel sink with drainage board made out of 1.00 mm thick sheet with plug, washers, MS angle cantilever brackets for suitable size and connecting union to pipe of overall size 1140 mm x 500 mm and bowl size 510mm x 400 mm x 190 mm complete all as specified and as directed

S&F in repairs vitreous china wash basin, white flat back of size (mm)160x600x470 with half pedestal excluding tap incl bracket complete all as specified and as directed.

S & F to Bib Taps with flange, cast copper alloy, 15 mm dia, Chromium Plated, Fancy Type with crutch or butterfly handle, screwed down for iron pipe and fixed etc complete all as specified and as directed

S&F stop valves cast copper alloy chromium plated with long shank and cup (concealed type) fancy type screwed down high pressure screwed both ends for pipe or union fixed for 15mm bore, including necessary cutting and making good wall or floor tiling to match existing(tiles to be paid supplied only rates) etc complete all as specified and as directed.

S & F Angular cock 15 mm dia, cast copper alloy with capstan head, screwed down high pressure with long shank and cup fancy type for iron pipe etc complete all as specified and as directed.

S & F Two way Bib Taps, cast copper alloy, 15 mm dia, Chromium Plated, Fancy Type with crutch or butterfly handle, screwed down for iron pipe and fixed etc complete all as specified and as directed.

S & F Bib Taps,long boby with flange cast copper alloy, 15 mm dia, Chromium Plated, Fancy Type with crutch or butterfly handle, screwed down for iron pipe and fixed etc complete all as specified and as directed.

S&F in repairs brass chromium plated telescopic hand shower (Health Faucet) (ABS Body) with 1 Meter long Easy Flex Tube in Chrome Finish & wall Hook complete all as specified and as directed

S&F brass chromium plated shower rose with 150mm long CP shower arm 125 mm size revolving type suitable for 15 mm bore pipes complete all as specified and as directed.

S & F Soap Dish, Vitreous China, White of approximate size 160 x 160 x 90 mm with screws complete all as specified and as directed.

S & F PVC body cabinet box mirror of size 350mm X 450mm X 100mm in PTMT alloy of approved design and pattern complete all as specified and directed

S&F in Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long of approved quality complete all as specified and as directed.

S & F Pillar Taps, cast copper alloy, Chromium Plated, Fancy Type, 15 mm dia, with capstan head, screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and as directed.

S&F in repairs vitreous china Anglo Indian WC with normal closing seat cover, white with P or S trap, front or back inlet and foot rest complete including provision of PCC (1:5:10) bedding if required, all as specified.

S & F in repairs 10 Liters capacity, PVC Valve less, Symphonic action type, low level flushing cistern, white, with inlet ball valve, float, handle, flush pipe of polyethylene of low or high density of PVC, 32mm dia including brackets and connections to pipe complete all as specified and as directed.

S&F in repairs PVC / UPVC flexible connection, of 15mm dia and 600mm long with brass unions and rubber washers on either side, for connecting water supply line to WHB, flush tank ,Geyser etc, all as specified.

S & F in repairs 75mm bore PVC [SWR] pipes single socketed, in any length with rubber ring joints, fixed to walls including necessary brackets, clamps as in down pipes complete all as specified and as directed.

S & F in repairs 75mm bore PVC [SWR] pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

S & F in repairs 75 mm bore PVC [SWR] Bends of any radius including jointing with solvent cement complete all as specified and as directed.

S & F in repairs 75 mm bore PVC [SWR] Bends of any radius with Access Door including jointing with solvent cement complete all as specified and as directed.

S & F in repairs 75 mm bore PVC [SWR] Junction Single [Single "T"] equal or unequal with access door including jointing with solvent cement complete all as specified and as directed.

S&F in repair PVC (SWR) T bends with access door 75mm dia complete all as specified and as directed

S&F in repair 75mm bore PVC [SWR] Vent Cowl including jointing with solvent cement complete all as specified and as directed.

S & F in repairs 75mm dia out let, PVC (SWR) Floor Trap with SS grating including jointing to waste pipe fixed in cement concrete 1:2:4, Type B-1 complete all as specified and as directed.

S & F in repairs 110mm bore PVC [SWR] pipes single socketed, in any length with rubber ring joints, fixed to walls including necessary brackets, clamps as in down take pipes complete all as specified and as directed.

S & F in repairs 110 mm bore PVC [SWR] Bends of any radius including jointing with solvent cement complete all as specified and as directed.

S & F in repairs 110 mm bore PVC [SWR] Bends of any radius with Access Door including jointing with solvent cement complete all as specified and as directed.

S & F in repairs 110 mm bore PVC [SWR] Junction Single [Single "T"] equal or unequal with access door including jointing with solvent cement complete all as specified and as directed.

S&F in repair PVC (SWR) T bends with access door 110mm dia complete all as specified and as directed

S&F in repair PVC (SWR) gully trap 125/110mm setting and jointing with solvent cement complete all as specified and as directed

S&F in repair 110mm bore PVC [SWR] Vent Cowl including jointing with solvent cement complete all as specified and as directed.

S & F in repairs Brass Chromium Plated Tubular Towel Rail, 20mm dia, D Type, 600 mm long between flanges complete all as specified and as directed.

S&F in repairs 18 mm plywood, grade BWP, type BB fixed in cup board shutters, shelves & partition complete all as specified and as directed

M&L for 0.9mm thick Decorative laminates type I surface finish, colour and pattern as approved incl all necessary cutting to the size and pasting to the wood surface with and including approved synthetic adhesive as per manufacturer's instructions complete all as specified and as directed.

S&F 30mm width continuous (piano) hinges mild steel finish or electro galvanised complete all as specified and as directed

S&F 100mm long hasp and staples mild steel wire type stove enameled black including bolt to hinge plate and fixed with screws complete all as specified and as directed.

S & F in repair fancy type curtain rod /Harrison rails mild steel, chromium plated 25 mm dia with stops, rollers etc complete all as specified and as directed.

S & F in repair brass brackets chromium plated suitable for curtain Rod 25 mm dia complete all as specified and as directed.

S & F Stainless Steel plate rack of size 910 mm X 960 mm of super deluxe model, suitable for 12 plates made with 22 gauge sheet and weight not less than 5.5 Kg, complete all as specified and as directed.

M & L for 75 mm thick PCC 1:3:6 type C-2 using 20 mm graded stone aggregate as in sub base, plinth protection etc complete.

M & L for RCC 1:2:4 type B1 using 20 mm graded stone aggregate as in slab supported on walls, beams and columns in floors, roofs, landings, deck slab, shelves and like complete all as directed.

Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work horizontal or sloping etc complete.

M&L for precast cover slab with 1:2:4 type B1 using 20mm graded stone aggregate incl cost of use and waste of clean sawn wooden form work but excl cost of reinforcement all as specified incl removal of existing unserviceable cover slab.

M&L for TMT bars 10mm dia and over cut to length, bent to shape required incl cranking and hooking ends and binding with MS wire (annealed) of dia not less than 0.90mm all as specified and directed.

Cutting holes exc. half brick but not exc one brick in brick walls built in CM or cement lime mortar & stone walls built in lime mortar for inserting holdfasts & making good dismantled portion in CM(1:3) or PCC(1:2:4) Type B-1 as required all as specified and directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. and making good disturbed surfaces of walls, floors, etc complete all as specified and as directed

M & L for point wiring with 1.5 Sqmm (Nominal Area) FRLS PVC insulated sheathed multi stranded copper conductor, 1100 Volts drawn through and including rigid non metalic concealed conduit medium grade ISI marked minimum 20mm size and its accessories complete along with 1.5 sqmm cable but in green colour as continuous earthing wire and connecting to common earth dolly completely concealed, in walls/ ceiling/ roofs with and including 1.2mm thick MS sheet terminal boxes duly fabricated flush mounting in the wall for mounting switches, switch socket combinations , fan regulators etc, as required with 3mm thick plastic laminated sheet top cover all as specified and as directed for the following points :-

one light point controlled by one switch.

one ceiling / exhaust fan point controlled by one switch

one three pin socket out let 5 amps on independent board complete.

one three pin socket out let 5 amps on Same board complete.

one call bell point controlled by one bell switch.

M & L for point wiring with 2.5 Sqmm (Nominal Area) FRLS PVC insulated sheathed multi stranded copper conductor, 1100 Volts drawn through and including rigid non metalic concealed conduit medium grade ISI marked minimum 20mm size and its accessories complete along with 2.5 sqmm cable but in green colour as continuous earthing wire and connecting to common earth dolly completely concealed, surface in walls/ ceiling/ roofs with and including 1.2mm thick MS sheet terminal boxes duly fabricated flush mounting in the wall for one 3 pin socket out let 15 amps on independent board with 3mm thick plastic laminated sheet top cover all as specified and as directed.

M & L for point wiring with 4 Sqmm (Nominal Area) FRLS PVC insulated sheathed multi stranded copper conductor, 1100 Volts drawn through and including rigid non metalic concealed, conduit medium grade ISI marked minimum 20mm size and its accessories complete along with 4 sqmm cable but in green colour as continuous earthing wire and connecting to common earth dolly completely concealed, surface in walls/ ceiling/ roofs with and including 1.2mm thick MS sheet terminal boxes duly fabricated flush mounting in the wall for one 3 pin socket out let 15 amps on independent board with 3mm thick plastic laminated sheet top cover all as specified and as directed. Note for Sr. No 134.00 to 136.00 : Necessary PVC,rigid,concealed type junction boxes for identifying junction as required on site directed by Engr-in-charge for point wiring work with PVC dummy plates shall deemed to be included in the quoted.

S&F in repairs Switch Piano type 6A 240 Volts complete all as directed.

S&F in repairs bell push switch piano type 5 Amps SP complete all as directed

S&F in repairs ceiling rose surface type Bakelite 65 x 50 mm with three terminals complete all as directed

S&F in repairs Switch Socket Combination, 5/6A - 2/3 pin complete all as directed

S&F in repairs Socket outlet Combination , 15/16A - 2/3 pin complete all as directed

S&F in repairs Socket outlet 2 in 1, 3 pin, 5 and 15 amp flush type complete all as directed

S&F Ceiling in repairs Fan socketed step type regulator, complete all as directed

S&F Lamp holder, PVC/Polycarbonate angular type complete all as directed

S & F in repairs LED base B12 (holder type) 7 watts complete all as directed

S & F in repairs bell socket buzzer,ding dong AC 230 Volts, single phase complete all as directed

Taking down ceiling fan / Exhaust fan ceiling cable end, dismantling blades and removing fan and each blades to E/M store yard complete all as directed

S&F Energy efficient (5 Star rated) ceiling fan 1200 mm sweep single phase 230 volts AC with necessary fitting with down rod canopy suitable for ceiling complete and connecting up including provision of three core flexible PVC cable with stranded copper conductor of size 1.5 Sqmm from ceiling rose to connector of ceiling fan all as directed and as specified.

S&F Metallic Heavy duty Exhaust fan continuous duty with louvers, with fixing arrangements & making hole of suitable size if necessory for 300 mm sweep, 1400 rpm, 240V complete all as specified and as directed

S&F Single pole and neutral enclosure with a two pin and earth with single pole MCB 20 Amp complete all as specified and as directed

Taking down energy meter of any capacity including connection and deposit to E/M store yard complete all as directed

S&F AC single phase static energy meter of accuracy class 1.0, 240 V, 50 Hz with Backlit LCD display of rating 10-60A, (measures and displays KWH ,V, Current I, KW, pf last month history of KWH, MD in KW) with special features like TOD, temper logging, optical communication port display in absence of power with transparent hinge type box complete all as specified and as directed

S&F in repairs decorative Ultra Slim linear LED lighting fixture with extruded Polycarbonate environmentel friendly energy effcient 20W LED 6000K, 2000 lm in a compact batten (57.5 cm), decorative mushroom profile LED lighting fixture with extruded aluminium channel complete all as specified and as directed

S&F in repairs decorative Ultra Slim linear LED lighting fixture with extruded Polycarbonate environmentel friendly energy effcient 09W LED 6000K, 2000 lm in a compact batten (57.5 cm), decorative mushroom profile LED lighting fixture with extruded aluminium channel complete all as specified and as directed

M & L for sub main wiring with FRLS PVC insulated. 1100 volts grade single core multistranded copper conductor cable conforming to IS specifications with 3 runs of 6 sqmm single core multistranded copper conductor FRLS PVC insulated cable as earth continuity conductor drawn through & including PVC conduit of 20mm dia. size and conduit accessories concealed in wall connecting to common earth dolly all as specified and directed. Note: (i)Three runs of cable and one run of conduit with necessary accessories will be measured as one unit length. (ii) The wiring shall be done in proper colour coding using red, yellow or blue for phase, black for neutral and green for earth leads.

M & L for sub main wiring with FRLS PVC insulated. 1100 volts grade single core multistranded copper conductor cable conforming to IS specifications with 3 runs of 4 sqmm single core multistranded copper conductor FRLS PVC insulated cable as earth continuity conductor drawn through & including PVC conduit of 20mm dia. size and conduit accessories concealed in wall connecting to common earth dolly all as specified and directed. Note: 3 runs of cable and 1 run of conduit with necessary accessories will be measured as one unit length.

S&F Sheet steel factory made, powder coated MCB DB with bus bar 200Amps.Neutral link, Earth bar, double door SPN 8 way 230 volts complete all as specified and as directed

S&F MCB Single pole 240 volts 6-32 Amps, 10KA complete all as specified and as directed

S&F MCB SPN 240 volts 0- 32 Amps, 10KA complete all as specified and as directed

S&F in replace sheet metal enclosure powder coated ,MCCB DB, 'G' frame TPN vertical D/D, 4 way IP 54 - Metal Door including Provision for one number MCCB as incomer suitable for 3 Pole & 4 Pole 100A, 25 KA for incoming bus bar, neutral links, blanking plates etc, all as specified and directed

S&F 25 liters capacity electrical geyser white copper container inner tank with fiber reinforced body (FRB) puff insulation for both inner tank & for hot outlet copper connection pipe with all in built in safety accessories like thermostat/automatic thermal cut out with ON /OFF /CUT out indicators all pre-wired and additional safety accessories like pressurer release valve/presure reducing valve, non return valve, including new PVC heavy duty pipe with brass ferrule fitting for HOT and COLD water connections as per manufacturers instruction with suitble size nuts & bolts, making necessary connection & testing complete all as specified and as directed

M&L for in replacement of earthing complete with Galvanized steel earth plate electrode 600 x 600 x 6 mm thick buried directly in ground (earth pit not less than 2.25 mir deep below GL) with top edge of earth plate not less than 1.5 Mtr below normal ground level, earth plate surrounded from all sides by 15cm thick and packed layer of charcoal dust and common salt filling in alternate layers and electrode connections by using Galvanized earth strip 32x6 mm size connected by means of bolts, nuts, check nuts and washer of galvanized iron or steel, provision of 15 mm dia GI pipe medium grade for protection of G1 earth wire and 20mm dia GI pipe medium grade for watering arrangement and PCC (1:3:6) , type CI chamber. MS funnel, wire gauge. 50 mm thick RCC 1:2:4, type B1 earth pit cover with 6 Nos. 8 mm dia high strength deformed steel TMT bars on both ways including necessary excavation in any type of soil, returning, filling in, removal of surplus soil to distance n exc 50 mtr, provision of charcoal and salt complete all as shown in electrical plate No 3 of schedule Part-I. Note: (i) Cost of GI earth wire and GI protection pipe upto 7.5mtr length shall be deemed to be included in the rate quoted for this item. (ii) The unit rate shall also includes for Wire mesh, funnel, excavation, returninng & filling, PCC chamber pit, RCC cover & test point. (iii) PCC pit shall be provided at least 500mm away from the earth pit and not just on the earth pit. (iv) All accessories required for galvanised steel plate electrode required, as specified and as directed.

S&F in replacement energy efficient LED security light fittings 25 Watts Green Line Range with high power LED lamp and unique peanut lens to ensure uniform distribution, AC, 230 Volts, 50 HZ supply single phase including connection with PVC insulated three core flexible copper conductor of suitable size complete all as specified and as directed

AMR TRADERS

GAYATRI ENTERPRISES

Allied Trading Company

Kathir Marketing Services

M/s Pooja Enterprises

ICON AGENCIES