Loading…
Loading…
Tender Value
₹45.6 L
EMD Value
₹91,300
Closing Date
16 Feb 2024, 9:30 pmClosed
Directorate of Municipal Administration
JE VCC
9980525048
Supplying and Fixing of Necessary Furnitures, Sofa sets and other works for new Corporation building. (General Fund)
DMA/2023-24/OW/WORK_INDENT518/CALL-2
DMA/2023-24/OW/WORK_INDENT518/CALL-2
Open
Other Works
Electronic Documents, First(One Cover)
DMA City Corporation Vijayapura
4 documents required · 4 mandatory
₹1,150
₹91,300
7 Feb 2024
7 Feb 2024
15 Feb 2024
Supplying and Fixing of Necessary Furnitures, Sofa sets and other works for new Corporation building. (General Fund)
Providing, fabricating and fixing partition frame work consisting of 50mm x 50mm sal wood frame work at spacing not exceeding 600mm c/c fixed to the bottom and ceiling, the partition shall be skinned ...
Providing and Fixing Veneer Paneling over the 50mm x 35mm sal wood frame work and top covered out of 4mm thick approved veneer fixed over 12mm ply finished in melomine polish, complete including cost ...
Meeting Table- Wooden:- Providing and fixing Meeting Table consisting of 25mm thick PLPB table top edge bounded, 25mm thick PLPB with edge bonded end table,18mm thick PLPB with edge bonded modesty, Ha...
Conference Table - Wooden: Providing and fixing Conference Table consisting of 25mm thick PLPB table top edge bounded, 25mm thick PLPB with edge bonded End table,18mm thick PLPB with edge bonded Modes...
Providing and fixing of 12mm Thick Clear glass (Saint gobain,Modi Float),all sides polished.As per approved by Architect/Client.Including necessary transportation etc., complete and as directed by Eng...
Providing and fixing of storage unit of 0.75m depth made out of 19mm tick commercial ply vertical support finished in approved 1.00 MM laminate with 12mm thick ply backing internally finished wit enam...
Providing and fixing of 3 Seater cusion sofa,frame/form work with 50mm thick wooden section and foam with 40 density of 100mm thick and top finished with approved colour fabric.Including necessary tra...
Supplying of Tea Tables/ Ceneter Tables With Top 8MM thick siant gobain clear glass and bottom with Ply sections with 1 MM tick laminate finished.Designs As per approved by Architect/client.with finis...
Providing and fixing of VIP Chair in cusion sofa,frame/form work with 50mm thick wooden section and foam with 40 density of 100mm thick and top finished with approved colour fabric.Including necessary...
Supplying of moveable (weels) meeting chairs with hydrolic arjustments ,high back mesh series and as directed by by Engineer Incharge.Including necessary transportation etc., complete and as directed ...
Single Doors Removing and finishing with 4mm thick veeneer on both side and around the edges finished with teak wood beeding and Hardware Standard 5 Yr warranty mortise central lock and Door closer
Double Doors Removing and finishing with 4mm thick veeneer on both side and around the edges finished with teak wood beeding and Hardware Standard 5Yr warranty mortise central lock and Door closer
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitt...
Providing and fixing flush door shutter made out of solid core block board type, wel seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door...
Supplying and fixing of Digital Flush Door With 46mm Thick, both side veneer finished and center with 6mm saint gobain glass with design frosting on glass including all hardwares. (6 Hinges-4 Nos ,Doo...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
kw-2 518.docx
Tender Document • 0.69 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].