Reorganisation of 11 KV bus-bar for making power arrengment for feeding power to New mobile crusher at new check post of AADOCM, Dhori area

Amount

Dismantling of pole in cement concrete foundation etc. as required.

Dismantling of over head lines comprising of aluminium over head conductor, G.I. wire, cross arms, insulators etc. as required.

Dismentaling of cable from 11 KV.H.T. O.H.line to transformer and transformer to LT OH line

Providing and laying in position cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) in foundation of pump, DG set etc. including form work etc. as required.For foundation bottom 24mq+pole pit 30 Mq + Fencing post 11 Mq

Providing and laying in position cement concrete1:2:4 (1cement: 2coarse sand: 4 graded stone aggregate 20mm nominal size) in foundation of pump, DG set etc including form work etc as required.foundation top.

Excavation for foundation in soft soil including dressing of sides and ramming of bottoms, lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 metres Pole pit 30 Mq+foundation 160 Mq.+Fencing post 11 Mq

Fabrication of iron materials like angle channels plate for iron structure and structure of shed

Errectionn of iron materials like angle channels plate for iron structure and structure of shed

Providing of post insulator H.T.

Providing of bus bar alloy alluminium pipe . 50 mm OD

Providing of post insulator clamp suitable for Bus-bar..

Providing of straight jointer for extension of bus bar.

Supply of Bi metalic connector.(Copper-alluminium)

Supply of T/L clamp for bus bar

Laying of Bus bar alongwith with all related equipments.

Laying of one number additional PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade of following size direct in ground in the same trench in one tier horizontal formation including excavation, sand cushioning, protective covering and refilling the trench etc as required.Above 95 sq. mm and upto 185 sq. mm

Extra for providing and fixing wind ties of 40x 6 mm flat iron section.(For fensing)

Providing and fixing G.I. chain link fabric fencing of required width in mesh size25x25 mm made of G.I. wire of dia 3 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge.

Erection of metallic pole of following length in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required Above 10.00 metre and upto 12.00 metre

Supply of G.O.S. 11 KV 800 Amp. G.O.S.

Fitting and fixing of GOS 800 Amp. 11 KV grade.

Provding and fixing alluminum connection from bus-bar to conductor vise varsa.

Erection of all aluminium conductor of 7/3.40 mm to 7/4.00 mm diameter and above including binding etc. as required .

Earthing with copper earth plate 600mm X600mm X3mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required

Providing brick work (in width225 mm or more) withF.P.S.bricks of class designation 7.5 in cement mortar 1:4 (1 cement : 4 coarse sand) at all levels.

Providing 15 mm thick cement plaster of mix 1: 4 (1cement:4finesand)at all levels.

With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel work (double coat)

Painting with aluminium paint of approved brand and manufacture to givean even shade . 13.63.1 Two or more coats on new work

Stay clamp for channel on structure

Nuts bots with washer.4 nuts bots for clamp stay, 8 nuts bolts for crossing brecing , 5 nuts for brackets of structure (17 structure )

Total impact of GST for the purpose of CTC

M/S UPENDRA ELECTRICAL (BID ID -1130418)