Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹8.6 LAccepted-Finance | L1 | Accepted-Finance L1 | |
| 2 | L2₹8.6 L+₹693.32 (0.08%)Accepted-Finance VILL MASTOL PO KALOTI TEHSIL CHIRGOAN DISTT SHIMLA 171207 HP | SHIMLA | HIMACHAL PRADESH | 171207 | L2 | Accepted-Finance L2 |
| Sl No | Description | Qty | Unit | Jitender Sharma L1 | PREM KRISHAN L2 |
|---|---|---|---|---|---|
| 1.00 | Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas in all width and depth on plan) including getting out and disposal of excavated earth all leads, lifts and carriage of material as directed by the Engineer-in-charge .a). Ordinary rock | 52.66 | Cubic Metre | 340 ₹17,904.4 Lowest | 350 ₹18,431 |
| 2.00 | Providing and laying in plain cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level with 1:3:6 (one Cement: three sand : six graded stone aggregate 20 mm (twenty milimetre) nominal size etc. complete in all respect as per satisfaction of Engineer-in-Charge . | 1.9 | Cubic Metre | 6,000 ₹11,400 Lowest | 6,000 ₹11,400 Lowest |
| 3.00 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering work up to plinth level with 1:5:10 (one cement : five sand : ten graded stone aggregate 40 mm (forty milimetre) nominal size etc. complete in all respect as per satisfaction of Engineer-in-charge. | 17.85 | Cubic Metre | 5,000 ₹89,250 Lowest | 5,000 ₹89,250 Lowest |
| 4.00 | Providing and fixing wire gauge shutters Kiln seasoned and chemically treated hollock wood using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws with 35 mm (Thirty five milimetre) thick shutters with ISI marked M.S. pressed butt hinges bright finished of required size etc. complete in all respect as per satisfaction of Engineer-in-charge.. | 16.8 | Square Metre | 3,699 ₹62,143.2 Lowest | 3,700 ₹62,160 |
| 5.00 | Providing and fixing ISI marked oxidized/ Chromium plated M.S. Sliding door bolts with nuts and screws etc. complete in all respect as per satisfaction of Engineer-in-Charge a). 250x16 mm ( Two hundred fifty into sixteen milimetre) | 4 | Each | 249 ₹996 Lowest | 250 ₹1,000 |
| 6.00 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete in respect as per satisfaction of Engineer-in-Charge. | 125.78 | Kilogram | 95 ₹11,949.1 Lowest | 95 ₹11,949.1 Lowest |
| 7.00 | Structural steel welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using tube etc. as required complete in all respect as per satisfaction of Engineer-in-Charge. a). In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. | 199.6 | Kilogram | 115 ₹22,954 Lowest | 115 ₹22,954 Lowest |
| 8.00 | Providing and laying rectified jointless Ceramic floor tiles (Kazaria / Oreint bell / Nitco/ Somany make) of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (one Cement : four sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc complete in all respect as per satisfaction of Engineer-in-Charge. | 31.32 | Square Metre | 1,198 ₹37,521.36 Lowest | 1,200 ₹37,584 |
| 9.00 | Grouting the joints of flooring Kota/tiles 300 into 300mm size having joints of 3 mm width in different size of tiles/ Kota stone, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing etc. complete as per the satisfaction of Engineer-in-charge. | 31.32 | Square Metre | 240 ₹7,516.8 Lowest | 240 ₹7,516.8 Lowest |
| 10.00 | Providing and fixing jointless Ist quality ceramic glazed wall tiles (Kazaria / Oreint bell / Nitco/ Somany make) conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineerin- Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete in all respact as per direction of Engineer-in- Charge | 25.2 | Square Metre | 1,249 ₹31,474.8 Lowest | 1,250 ₹31,500 |
Tender Value
₹6.7 L
EMD Value
₹13,500
Closing Date
17 Sept 2025, 10:00 amClosed
EE (C)
O/O Estate Oganization UHF Nauni Solan
Renovation of wash room and paint work in Kedar NRI Boys Hostel at Dr YSP University of Horticulture and Forestry Nauni Solan
2025_YSPU_114312_1
No.UHF/Const.-1/Partfile /2025/-1618 dated 06.09.2025
Open Tender
Civil Works
Item Rate
120 days
Nauni solan
Please refer Tender documents.
4 documents required · 4 mandatory
₹1,000
EE (D)
₹13,500
17 Sept 2025
10 Sept 2025
17 Sept 2025
10 Sept 2025
17 Sept 2025
10 Sept 2025
Amount
Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas in all width and depth on plan) including getting out and disposal of excavated earth all leads, lifts and carriage of material as directed by the Engineer-in-charge .a). Ordinary rock
Providing and laying in plain cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level with 1:3:6 (one Cement: three sand : six graded stone aggregate 20 mm (twenty milimetre) nominal size etc. complete in all respect as per satisfaction of Engineer-in-Charge .
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering work up to plinth level with 1:5:10 (one cement : five sand : ten graded stone aggregate 40 mm (forty milimetre) nominal size etc. complete in all respect as per satisfaction of Engineer-in-charge.
Providing and fixing wire gauge shutters Kiln seasoned and chemically treated hollock wood using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws with 35 mm (Thirty five milimetre) thick shutters with ISI marked M.S. pressed butt hinges bright finished of required size etc. complete in all respect as per satisfaction of Engineer-in-charge..
Providing and fixing ISI marked oxidized/ Chromium plated M.S. Sliding door bolts with nuts and screws etc. complete in all respect as per satisfaction of Engineer-in-Charge a). 250x16 mm ( Two hundred fifty into sixteen milimetre)
Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete in respect as per satisfaction of Engineer-in-Charge.
Structural steel welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using tube etc. as required complete in all respect as per satisfaction of Engineer-in-Charge. a). In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.
Providing and laying rectified jointless Ceramic floor tiles (Kazaria / Oreint bell / Nitco/ Somany make) of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (one Cement : four sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc complete in all respect as per satisfaction of Engineer-in-Charge.
Grouting the joints of flooring Kota/tiles 300 into 300mm size having joints of 3 mm width in different size of tiles/ Kota stone, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing etc. complete as per the satisfaction of Engineer-in-charge.
Providing and fixing jointless Ist quality ceramic glazed wall tiles (Kazaria / Oreint bell / Nitco/ Somany make) conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineerin- Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete in all respact as per direction of Engineer-in- Charge
Finishing walls with Acrylic Smooth exterior paint of required shade level etc. complete in all respect as per satisfaction of Engineer-in-Charge. a) Old work (One or more coat applied @ 0.90 ltr/10 sqm).
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade etc. in all respect as per satisfaction of Engineer-in-Charge a) One or more coats on old work
Distempering with 1st quality acrylic washable distemper (ready made) of Approved manufacturer and of required shade and color complete. as per Manufacturer’s specification etc. complete in all respect as per satisfaction of Engineer-in-Charge.. a) One or more coats on old work
Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in- Charge. a).With cement mortar 1:4 (one cement : four sand)
Renewing glass panes, with wooden fillets wherever necessary complete in all respect as per satisfaction of Engineer-in-Charge. a) Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm)
Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within all leads etc. complete in all respect as per satisfaction of Engineer-in-Charge. a) Area 3 sq. metres and below.
Dismantling tile work in floors and roofs laid in cement mortar including stacking material within all leads etc. all complete as specified and as directed by the Engineer-in-Charge a). For thickness of tiles 10mm to 25mm
Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in- Charge.
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required complete in all respect as per satisfaction of Engineer-in-Charge (Cera/ Hindware make). a) W.C. pan with ISI marked white solid plastic seat and lid.
Cutting holes up to 30x30 cm in walls including making good the same with common burnt clay F.P.S. (non modular) bricks complete in all respect as per satisfaction of Engineer-in-Charge.
Providing and laying 60 mm (Sixty milimetre) thick factory made interlocking paver block of M-30 grade (ISI Mark) made by block making machine with strong vibratory compaction of approved size, design & shape laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with line sand etc. Complete in all respect as per direction of Engineer-in- Charge.
Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm and 4mm dia including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge..
Supplying, straining and fixing of 4mm plain mild steel galvanized wire to wood, concrete or steel standards and or to straining Boards including securing with galvanized iron type wire galvanized iron and staples or steel pins etc. complete in all respect as per satisfaction of Engineer-in-charge.
Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete in all respect as per satisfaction of Engineer-in-charge (Finolex/Vectus/D-plast/Prayag make).
a). 75mm (Seventy five millimetre) dia
b).. 110mm (One hundred ten millimetre) dia
Providing and fixing PVC collars ISI marked including fixing with approved adhesive etc. complete in all respect as per satisfaction of Engineer-in-charge (Finolex/Vectus/D-plast/Prayag make).
a). 75mm (Seventy five millimetre) dia
b).. 110mm (One hundred ten millimetre) dia
Providing and fixing PVC plain bend ISI marked complete including fixing with approved adhesive etc. complete in all respect as per satisfaction of Engineer-in-charge (Finolex/Vectus/D-plast/Prayag make).
a). 75mm (Seventy five millimetre) dia
b).. 110mm (One hundred ten millimetre) dia
Providing and fixing PVC door bend with oval access door, insertion rubber washer 3mm thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. complete in all respect as per satisfaction of Engineer-in-charge (Finolex/Vectus/D-plast/ Prayag make).
a). 75mm (Seventy five millimetre) dia
b).. 110mm (One hundred ten millimetre) dia
Providing and fixing PVC floor trap with grating ISI marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete in all respect as per satisfaction ofEngineer-in-charge(Finolex/Vectus/D-plast/Prayagmake)a) 110mmx75mm
Providing and fixing PVC single equal branch with oval access door, ISI marked insertion rubber washer 3mm thick bolts and nuts complete including fixing with approved adhesive etc. complete in all respect as per satisfaction of Engineer-in charge (Finolex/Vectus/D-plast/Prayag make).
a). 75mm (Seventy five millimetre) dia
b).. 110mm (One hundred ten millimetre) dia
PREM KRISHAN (BID ID -557221)
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .