RR of LWSS Gagna Badlog GP Nanhar Tehsil Chopal Distt. Shimla H.P

Supply of Horizental spindle, horizental split casing Single/Multistage centrifugal pumps of standard make such as KSB/Mather & Platt/Jyoti/Kirloskar conforming to BIS 1520-1980 (latest with upto date amamendments) read with BIS 9137-1978 or latest to handle clear water having turbidity 50 ppm. with impellers, casing ring & shaft sleeves of bronze, shaft of steel with cast iron casing of suitable capacity coupled directly through a flexible coupling on a common base plate to Kirloskar/NGEF/Crompton/Siemen/Jyoti slipo ring/squirrel cage screen protected drip proof induction electric motor suitable for operation on the data given below Motor Make: Kirlosker.125 HP.

Providing & installation of fully /Semi automatic star delta starter control panel( powder coated ) 415 V 3 phase 50 Hz consists of contactors, motor relay coil voltage 200-400 V, LED indication ,Amber,Red and Green LED for various indication , current and voltage meter , over voltage protection , timer , fuse unit and push buttons (NO and NC type ) of reputed make such as L&T/ABB/ Schneider , BCH or equivalent in accordance with latest IEC and IS Specifications. for 125HP/ 167.50KW

Excavation in foundations , trenches etc., in earth work , lift up to 1.50 metres. Stacking the eacavated soil not more than 3 metres clear from the edge of the excavation and then returning the stacked soil in 15 cm. (fifteen centimetres) layers , when required in to plinth and sides of foundations etc., conslolidating each of the disposited layer by ramming and watering and then disposing off all excavated soil as directed with in the load of 20 mtrs. Pick and Jumper work etc. complete as per the direction of the Engineer - in - Charge.

Providing and laying cement concrete 1:4:8 (1cement:4sand:8graded stone agg. 40mm nominal size)and curing complete excluding cost of form work in :- a) Foundation and plinth.

Providing and laying cement concrete 1:11/2 :3 ( 1cement: 1 1/2 sand: 3graded stone aggregate 20 mm nominal size )and curing complete excluding the cost of form work and reinforcement in:-

foundation footing and bases of columns & like mass concrete.

Walls(any thickness but ot less than 0.1 mtr thickness) attached pilasters, buttresses, plinth and string courses etc. from top of foundation level up to floor two level.

Providing & laying CC 1:2:4 1cement:2 sand 4 graded aggregates 20mm nominal size curing complete excluding cost of form work & reinforcement for RCC work in:- with in all leads and lifts as per the directions of the Engineer in charge.

In suspended floor roofs landing shalves & their support balconies,beams, girders bressumers cantilevers upto floor two level

Providing form work with steel plates 3.15mm thick so as to give fair finish I/c centering shuttering propping etc. height of propping below supporting floor to ceiling not exceeding 4mt. Height & removal of same in situ reinforce ment concrete and plain concrete work in :-

Vertical surface such as walls(any thickness) partitions and the like including attached pillasters, butteresses, plinth and string courses and the like.

Flat surfaces such as soffits of suspended floor roofs landing & like floor etc.,upto 200mm thickness.

Edge of slab and break in floor 20 cm wide

Providing mild steel/tor steel reinforcement I/c bending binding and placing in position complete

Steel work welded in built up sections, trusses and framed work including cutting hoisting Fixing in position and applying a priming coat of red lead paint :-

In trusses and trussed purlings in buildings.

20 mm thick cement plasterin two coats , 15 mm and finisinhing coat 5 mm thick on rough side of brics/stone/concrete walls for interior plastering up to floor two level including arrisses, internal rounded angles, chamfers and or rounded angles not exceeding 80 mm in girth and finished even and smooth with in all leads and lifts in C.M 1:6 ( 1 cement : 6 sand )

Providing and laying heavy duty precast cement conrete inter locking precast cement conrete inter locking paver blocks vibro compacted upto M-50 grade i/c border or kurb block grey or coloured over sub-base of concrete with 25mm thick average thickness of cement mortar 1:4 (1 cement : 4 sand) laid over and jointed with neat cement slurry mixed with pigment to match the shade of blocks i/c curing rubbing & polishing complete (Sub base concrete floor to be paid for 60mm thick inter locking blocks

White washing with lime on undecorated wall surfaces (two coats) to give an even shade including thoroughly brooming the surface to remove all dirt dust mortor drops and other foreign matter.

Painting two coats (excluding priming coat) on new steel and other metal surfaces with enamel paint brushing to give an even shade including cleaning the surface of all dirt, dust and other foreign matters.

Providing and fixing Pannelled and glazed shutters for doors windows and clear storey windows including bright finish black enamel led iron butt hinges with necessary screws 40mm thick: :First class deodar wood :-

Supplying of various materials for pump house.i)Tool Kit with all accessory etc.(ii) Bearing puller, insulation gloves & gress gen iii) Steel / C.I.chairs,Poly table

Half Brick masonary using common burnt clay building bricks above plinth upto floor two level in cm 1:4(1cement:4sand)conventiohal brick 2nd class

Dry brick /boulder filling round soak pit 2nd class with in all leads and lifts as per the directions of the Engineer in charge.

Providing and supply of steel shelves and chair as per direction and to the entire satisaction of Engineer in Charge at site of work

Providing and fixing vitreous China wash down water closet (European type. W.C. Pan) with integral 'P' or 'S' trap including jointing the trap with soil pipe in cement mortar 1:1 (1Cement : 1 Sand) (Seat and cover to be measured and paid for separately) Ordinary type.

Providing and fixing PTMT Coloured / white high density polyethlylene / poly propylene 10 liters cap. full flush European standard control low level flushing Cistern with fitting and within all leads and lifts and as directed by the Engin

P/F C.P. Soap dish with C.P. brass brackets fixed to wooden cleats With C.P. brass screws with in all leads and lifts as per the directions of the Engineer in charge.

P/F C.P. Brass Bib tap with capstan head(15mm dia) with in all leads and lifts as per the directions of the Engineer in charge.

P/F C.P. Angle cock 15mm dia within all leads and lifts as per the directions of the Engineer-in-charge,

P/F of PVC Elbow 15mm with in all leads and lifts as per the directions of the Engineer in charge.

P/F of PVC Tee 15mm with in all leads and lifts as per the directions of the Engineer in charge.

Laying PVC in wall. Ceiling including with in all leads and lifts as per the directions of the Engineer in charge .15mm dia(fiifteen milimetres)nominal size.

Providing and fixing in trenches 10 Kg.f/cum2 working pressure unplasticized P.V.C. pipe (Conforming to IS: 4985-1968) complete fittings (earth work in trenches to be measured and paid for separately):-

110 mm out side diameter.

Elbow 100 mm dia.

Door Bends

Plain bends

Collar

Floor Traps

Providing and Fixing antiskid water proof stain and impact resistent heavy duty vetrified tiles Nitco or equivelent (300 X 300 X 10 mm) manufactured of approved shade and colour treads of steps laid on a bed of 12 mm thick cement mortor 1:3 (1cement : 3 sand) finished with flush pointing in white cement mixed with pigment ofrequired shade to match the shade of tiles complete.