REPAIR AND PAINTING OF STEEL FURNITURE OF OTM ACCN UNDER GE (NORTH) MEERUT CANTT

Amount

ALMIRAH LARGE STEEL (FD -1031)

CP Handle : Removing of old unserviceable handles from Almirah large steel and S&F new CP steel handle of exisiting size to Almirah large steel all as shown on drawing complete all as specified and directed

Lock : Removing of old unserviceable lock from Almirah large steel and S&F new lock of approved make, 06 lever with two keys to Almirah large steel all as shown on drawing complete all as specified and directed

Locking Device : M&L for locking device and lock bar as required and as directed by Engr-in-Charge to Almirah large steel including making adjustment of door shutter & applying one coat of synthetic enamel paint over a coat of red-oxide primer after preparation of surfaces complete with spray machine all as shown on drawing complete all as specified and directed

Legs : Removing of old unserviceable leg from Almirah large steel and S&F new leg made out of 1mm thick MS black sheet (PBI) of existing size, shape and welding at appropriate points complete all as specified and directed

All as per Sr.item No. 5 here-in-before but bottom sheet of Almirah large steel.

All as per Sr.item No. 5 here-in-before but shelf of Almirah large steel.

Removing of old unserviceable butt hinges of Almirah large steel and S&F new butt hinges 75 mm long and adjusting door by revitting / welding complete all as shown on drawing complete all as specified and directed

M&L for refixing of loose shelves with mild steel revitting /spot welding complete all as specified and directed

S & F 02 Nos of nylon bufferrs at the bottom of each legs with MS bolt.

BED HARD STEEL (FD/E6/MAP/08 (R )

Removing of old and unserviceable Plytop from Bed Hard and S&F of new 12mm thick plytop of siutable size, ISI marked, BWR phenol bonded plywood of unpolished edging of approved quality all as shown on drawing and as directed.

Removing of old unserviceable head board from Bed Hard and S&F new head board made of 18 mm thick Plywood BWR Grade both laminated with colour/ shade approved by GE/ Engr-in-Chrge. All as per size and design shown on drawing and as directed.

All as per Sr.item No. 13 here-in-before but foot board of Bed hard.

S&F in replacement hard rubber shoes at each corner of long rail of Bed hard steel all as shown on drg complete all as specified and directed

S&F in replacement hard rubber shoes at the top of leg of of Bed hard steel all as shown on drg complete all as specified and directed

S&F in replacement hard rubber shoes at the bottom of leg of Bed hard steel all as shown on drg complete all as specified and directed

Welding to broken joints of bed hard complete all as specified and directed

TABLE BED SIDE (OFFICERS) (FD/E6/MAP/15 (R )

Replacement of upper drawer made out of 18 mm thick BWR plywood witrh both lamination with colour/ shade as approved by GE/Engr-in-Charge.

Replacement of Lower drawer made out of 18 mm thick BWR plywood witrh both lamination with colour/ shade as approved by GE/Engr-in-Charge. & telescopic channel of best quality as approved by Engr-in-charge.

Removing of old unserviceable top from table bed side and supply and fixing the new top made out of 18 mm thick BWR grade plywood with both side lamination duly post-formed with colour / shade as approved by GE/ Engr-in-Charge board

All as per srl item No. 22 here-in-before but side of table bed side.

Removing of old unserviceable back ply of table bed side and supply and fixing the newback ply of same size made out of 06mm thick plywood all as shown on drawing and as directed by Engineer-in-Charge.

Removing of old/unserviceable handle from the table bed side and supply and fixing new CP steel handle 100mm long as per sample, shape and size all as per drawing and as directed by Engr-in-charge.

LOCKER BED SIDE STEEL :- (FD-257)

Replacement of old unserviceable hasp and staple with new 100mm long MS chromium plated hasp and staple all as shown drg complete all as specified and directed

Replacement of old unserviceable bow handle with new 100mm long CP steel bow handle all as shown on drg complete all as specified and directed

Replacement of unserviceable conduit pipe with new CP steel conduit pipe of siutable size of 20mm dia having wall thickness 1.25mm to locker steel complete all as specified and directed

Replacement of unserviceable socket with new aluminium socket/brackets suitable for MS 20mm dia conduit pipes complete all as specified and directed

Removing of old unserviceable foot rest from locker bed side steel and supply and fixing new foot rest made out of 1mm thick MS black sheet (PBI) of existing size, shape and welding at appropriate points and applying one coat of synthetic enamel olive green paint with spray machine over a coat of primer after preparation of surfaces complete all as specified and directed

All as per item Sl No 31 above here-in -before but bottom sheet of locker bed side steel.

Removing of old unserviceable MS hinges of locker bed side steel and S&F new MS hinges 65 mm long with gas welding / revitting complete all as shown on drawing complete all as specified and directed

M&L for refixing of loose shelves with mild steel revitting /spot welding complete all as specified and directed

S & F 02 Nos of nylon bufferrs at the bottom of each legs with MS bolt.

CHAIR REVOLVING LOW BACK (STEEL) :- (FD-TP)

Replacement of old unserviceable seat and back of chair with new seat of 12mm thick plywood commercial quality (ISI marked) covered with 75mm thick U foam and best quality of tapestry cloth. The back shall be 6mm thick plywood commercial quality (ISI marked) fixed on frame with screwes and covered with 40mm thick U foam over shape and best quality of tapestry cloth. Seat and back fixed on frame with screw and including all minor repairs and welding etc complete all as specified and as directed by Engineer-in-Charge. (Note :- The tapestry cloth of rate ranging between Rs. 150/- to Rs. 175/- per meter as per sample approved by GE.)

Removing of old/unserviceable tapestry cloth from seat and back of existing Chair Revolving and S&F new tapestry cloth to seat and back of Chair Revolving complete all as specified and as directed by Engineer-in-Charge. (Note:- The tapestry cloth of rate shall not be less than Rs. 175/- per meter as per sample approved by GE).

Replacement of unserviceable hydrulic system of Chair revolving for the adjustment of height complete all as specified and directed

Replacement of old ,unserviceable/broken wheel base of Chair revolving complete all as specified and directed

Removing old/unservicavle twin castor wheel from chair and S & F new twin wheel castors as per shape and size complete all as specified and directed.

Replacement of old unserviceable / broken arm rest with new arm rest of black integral skin polyurethane reinforced with MS insert and shall be scratch and weather resistant of Chair briefing static base complete all as specified and directed

TABLE OFFICE OFFICER STEEL :- FD-1003)

Removing of old unserviceable top from Table Office Officer Steel and supply and fixing of new top made out of 18 mm thick BWR plywoood duly post-formed with colour / shade as approved by Engr-in-Charge / GE

Removing of old unserviceable lock from Table Office Officers steel and S&F new brass lock with two keys all as shown on drawing and as directed.

Removing of old unserviceable drawer from Table Office Officers steel and supply and fixing the new drawer of same size and shape made out of 1mm thick MS black sheet all as shown on drawing and as directed complete all as specified and directed

S & F in replacement 100mm long piece of 25 Sq mm MS tube having wall thickness of 1.6mm including welding to Table Office Officers complete all as specified and directed

S&F in replacement PVC shoes to Table Office Officers steel complete all as shown on drg complete all as specified and directed

Welding to broken joints of Table office officer's steel with drawer complete all as specified and directed

TABLE OFFICE CLERK STEEL :- (FD-1004)

Removing of old unserviceable top from Table Office Officer Steel and supply and fixing of new top made out of 18 mm thick BWR plywoood duly post-formed with colour / shade as approved by Engr-in-Charge / GE

Removing of old unserviceable lock from Table Office clerk steel and supply and fixing new lock with two keys all as shown on drawing complete all as specified and directed

Removing of old unserviceable drawer from Table Office clerk steel and supply and fixing the new drawer of same size and shape made out of 1mm thick MS black sheet all as shown on drawing complete all as specified and directed

S & F in replacement 100mm long piece of 25 Sq mm MS tube having wall thickness of 1.6mm including welding to Table Office Clerk steel complete all as specified and directed

S&F in replacement PVC shoes to Office clerk steel complete all as shown on drg complete all as specified and directed

Welding to broken joints of Table Office clerk steel with drawer all as directed .

TABLE DINING OR's STEEL (A/TOP) :- (FD-165 (M)

Removing of old unserviceable top from Table dining OR's steel and S&F the new top of same size made out of 18 thick BWR plywood duly covered with 0.6mm thick, 24 gauge aluminium sheet all as shown on drawing complete all as specified and directed

Welding to broken joints of Table dining OR's steel all as directed .

S&F in replacement PVC shoes to Table dining OR's steel complete all as shown on drg complete all as specified and directed

S & F in replacement 100mm long piece of 25 Sq mm MS tube having wall thickness of 1.6mm including welding to Table dining OR's steel complete all as specified and directed

CHARPOY WITH HARD TOP :- FD/MAP-II/01

Removing of old and unserviceable Plytop from Charpoy with hard top and S&F of new 12 mm thick plywood of suitable size, ISI marked, BWR phenol bonded plywood with unpolished edging of approved quality all as shown on drawing complete all as specified and directed

Welding to broken joints of Charpoy with hard top complete all as specified and directed

S&F in replacement hard rubber shoes at the bottom of Charpoy with hard top all as shown on drg complete all as specified and directed

TABLE 3'x 2' STEEL WITH DRAWER :- FD-1008

Removing of old unserviceable top from Table 3'x2' steel with drawer and supply and fixing of new top made out of 18 mm thick BWR plywood duly post-formed with colour / shade as approved by Engr-in-Charge / GE

Welding to broken joints of Table 3'X2' steel with drawer complete all as specified and directed

S&F in replacement PVC shoes to Table 3'X2' steel with drawer complete all as shown on drg complete all as specified and directed

S & F in replacement 100mm long piece of 25 Sq mm MS tube having wall thickness of 1.6mm including welding to Table 3'X2' steel with drawer complete all as specified and directed

Removing of old unserviceable lock from Table 3'X2' steel with drawer and supply and fixing new lock with two keys all as shown on drawing complete all as specified and directed

Removing of old unserviceable drawer from Table 3'X2' steel with drawer and supply and fixing the new drawer of same size and shape made out of 1mm thick MS black sheet all as shown on drawing and applying one coat of synthetic enamel olive green paint with spray painting (Internally and externally) over a coat of primer after preparation of surfaces complete all as specified and directed

TABLE 3'x 2' STEEL WITHOUT DRAWER :- FD-1007

Removing of old unserviceable top from Table 3'x2' steel with drawer and supply and fixing of new top made out of 18 mm thick BWR plywood duly post-formed with colour / shade as approved by Engr-in-Charge / GE

Welding to broken joints of Table 3'X2' steel without drawer complete all as specified and directed

S&F in replacement PVC shoes to Table 3'X2' steel without drawer complete all as shown on drg complete all as specified and directed

S & F in replacement 100mm long piece of 25 Sq mm MS tube having wall thickness of 1.6mm including welding to Table 3'X2' steel without drawer complete all as specified and directed

PAINTING :- M&L for removing existing paint by application of paint remover / grinding machine, applying one coat of red oxide steel primer and two coats of synthetic enamel paint (hammer tone / dual tone) make/colour/ shade as approved by Engr-in-Charge/ GE by spray painting after denting and filling with putty and preparation of surface thoroughly to the following steel furniture items (internally & externally complete) :-

Almirah large steel FD-1031

Bed hard steel (MAP) FD/E6/MAP/08®

Charpoy IP Hard Top (MAP) FD/MAP-II/01

Tabel 3'x2' with/ without drawer steel FD-1007, 1008

Table Bedside (Steel) FD/E6/MAP/1 (R )

Table Office Officer's Steel FD-1003

TABLE OFFICE CLERK STEEL :- (FD-1004)

Table Dining ORs A/Top FD-165(M)

LOCKER BED SIDE STEEL :- (FD-257)

Laxmi Furnitures & Engg (BID ID -3134599)

Sunny Furniture Centre (BID ID -3127601)