REPAIR/REPLACEMENT OF UG CABLE, LT PANEL/FEEDER PILLAR BOXES ,SWITCH GEARS, STREET LIGHTS, PERIMETER LIGHTS WITH CONNECTED ITEMS OF WORKS AND DG SETS AND REPAIR/RENEWAL OF INTERNAL WIRING AND LIGHT FITTINGS WITH RECHARGEABLE SMART INVERTER LED BATTEN

Amount

Supply and fix aluminium bus bar chamber 100 Amps 4 pole 415 volts outdoor type with angle iron stand of suitable size not less than 1mt above ground level with all fixing accessories etc complete all as specified and as directed by Engineer-in-Charge. Make : C&S / Havells / L&T / Legrand/ Siemens/ ABB/ Crompton Greaves

Supply and fix in repairs MCCBs 400 Amps, 36 KA, 4 pole, 415 Volts with adjustable thermal and adjustable magnetic settings complete all as specified and as directed by Engineer-in-Charge. Make : Larsen &Toubro/ ABB/ Siemens/ Schneider/ Havells/ Legrand/ Indo ASIAN/ C & S Electric/ BhartiaCuttler Hammer (BCH)

Supply and fix in repairs MCCBs 160 Amps, 36 KA, 4 pole, 415 Volts with adjustable thermal and adjustable magnetic settings complete all as specified and as directed by Engineer-in-Charge. Make : Larsen &Toubro/ ABB/ Siemens/ Schneider/ Havells/ Legrand/ Indo ASIAN/ C & S Electric/ BhartiaCuttler Hammer (BCH)

Supply and fix in repairs MCCBs 100 Amps, 16 KA, 4 pole, 415 Volts with adjustable thermal and adjustable magnetic settings complete all as specified and as directed by Engineer-in-Charge. Make : Larsen &Toubro/ ABB/ Siemens/ Schneider/ Havells/ Legrand/ Indo ASIAN/ C & S Electric/ BhartiaCuttler Hammer (BCH)

Supply and erect in replacement 9.0 meters long steel tubular swaged poles type 410 SP -31 complete with CI base plate and finial taper plug, bolts , nuts and screws etc all as specified and directed by Engineer-in-Charge. Note: Earth work excavation, PCC for foundation and coping will be measured and paid separately. Make: India Tube and Co / India Electric Poles Mfg Co,Maharashtra / Bombay Tubes / Kalinga Tubes / Singh Profile, Pune

Supply and fix in repairs MCCBs 250 Amps, 36 KA, 4 pole, 415 Volts with adjustable thermal and adjustable magnetic settings complete all as specified and as directed by Engineer-in-Charge. Make : Larsen &Toubro/ ABB/ Siemens/ Schneider/ Havells/ Legrand/ Indo ASIAN/ C & S Electric/ BhartiaCuttler Hammer (BCH)

Supplying, laying,connecting, testing & commissioning LT UG XLPE insulated, heavy duty, 1100 V grade electric cable with aluminium conductor, served with an inner sheathing of PVC tape, armoured with galvanised steel wire or tape and overall PVC sheathed of size 16 Sqmm x 4 core, laid in trenches or passing through pipe or fixed to wall, making all connections with and including provision of necessary glands, lugs, bushing etc as required including taking down old unserviceable cable complete all as specified and as directed by Engineer-in-Charge of following sizes:- Note : Earthwork excavation, DWC pipe for cable protection shall be measured and paid separately in their respective items Make: Cable Corporation of India (CCI)/ Asian Cable Co, Chattisgarh/ Finolex/ Polycab/ Gloster/Universal/ RPG Cables Ltd , Thane/ Havells India Ltd/ RR Kabel/ KEI Industries Ltd(KEI)

-do- same as Item no. 10 above but of size 25 Sqmm 4 Core

-do- same as Item no. 10 above but of size 35 Sqmm 3.5 Core

-do- same as Item no. 10 above but of size 50 Sqmm 3.5 Core

-do- same as Item no. 10 above but of size 70 Sqmm 3.5 Core

-do- same as Item no. 10 above but of size 95 Sqmm 3.5 Core

-do- same as Item no. 10 above but of size 6 Sqmm 2 Core

-do- same as Item no. 10 above but of size 10 Sqmm 2 Core

Supply and lay double wall corrugated (DWC) HDPE pipe 63mm outer dia , as per IS-16205 including couplers and bend for cable protection laid in trenches etc complete all as specified and as directed by Engineer-in-Charge Make : TELEREX 450N/ Rex Polyextrusion Ltd/ Finolex/ Prince Pipes and fittings ltd/Kisan/Supreme/JAIN IRRIGATION SYS/ Astral

Excavation in trenches, not exceeding 1.50 m wide and not exceeding 1.5 m in depth, for foundation, laying of cables/pipes etc and getting out in soft/loose soil complete all as specified and as directed by Engineer-in-Charge.

Excavation in trenches, not exceeding 1.50 m wide and exceeding 1.5mt but not exceeding 3.0 m in depth, for foundation, laying of cables/pipes etc and getting out in soft/loose soil complete all as specified and as directed by Engineer-in-Charge.

Returning, filling in including spreading, levelling, watering and well ramming in layers, not exceeding 25cm in soil complete all as specified and as directed by Engineer-in-Charge.

Removing excavated material to a distance, not exceeding 50 m and depositing where directed, at a level not exceeding 1.5 mtr above the starting point complete all as specified and as directed by Engineer-in-Charge

Material and labour for finding cable fault with electronic fault detector in LT UG cable of size upto 400 sqmm x 3.5 core complete including necessary earth work excavation all as specified and as directed by Engineer-in-Charge.

Material and labour for earthing complete with Galvanised steel earth plate electrode 60cm X 60cm X 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of earth the plate not less than 1.5 metres below normal ground level, connected to plate with GI earth strip of size 32mm x 6mm , 7.5m long from earth point to test point and other end connected to control board / panel / equipment, laid under floors/plinths or fixed on walls or concealed in wall etc by means of bolts, nuts, check nuts and washers made out of galvanized iron or steel with provision of charcoal & common salt not less than 50Kg, in each earthing packed up to maximum 30 cm on both side of plate with pouring of benzonite powder earthing chemical, not less than 20Kg in each earthing packed upto maximum 30cm on both sides of plate and GI strip protected by 40mm bore light grade galvanized iron pipe complete all as shown in electrical plate No. 3 of MES schedule Part I, 2009 with PCC 1:3:6, type C1 in chamber wall with CI cover and frame, watering pipe of size 20mm dia medium grade, 0.63mm thick GI sheet funnel with wire mesh and engraving of earth marking on nearby structure/ building with cement mortar 1:4 plate of size 200mm x 150mm x 15mm thick including necessary excavation and earth work in any type of soil/strata & testing complete all as specified and as directed by Engineer-in-Charge. Note :- (i) Contractor should submit test report of earthing after installation to Engineer -in-Charge

Material and labour for cutting or cutting the existing Bitumen Road /hard standing to size not exceeding 45cm wide and depth not less than 45cm for passing of UG cable through GI pipe and making good the disturbed surface filled with excavated material and top 200mm depth with plain cement concrete 1:3:6 type C1 using 20mm graded aggregate complete all as specified and directed.

Material and labour for Plain Cement Concrete 1:3:6 type C2 using 40mm graded stone aggregate as in foundation / mass concrete/coping including necessary formwork for fair finished surfacesetc complete all as specified and as directed by the Engineer-in-charge

Material and labour for Plain Cement Concrete 1:4:8 type D2 using 40mm graded stone aggregate as in foundation / mass concrete including necessary formwork for fair finished surfacesetc complete all as specified and as directed by the Engineer-in-charge

Supply and fix in repairs MCCBs 63 Amps, 16 KA, 4 pole, 415 Volts with adjustable thermal and adjustable magnetic settings complete all as specified and as directed by Engineer-in-Charge. Make : Larsen &Toubro/ ABB/ Siemens/ Schneider/ Havells/ Legrand/ Indo ASIAN/ C & S Electric/ BhartiaCuttler Hammer (BCH)

Material and labour for straight Through Heat shrinkable type Cable Joint Kit including Jointing Materials for making Joints of LT UG Electric Cable 1100 Volt Grade Heavy Duty with XLPE insulated Aluminium Stranded Conductor of size 25 to 50 Sqmm x 3½ Core and Testing complete all as specified and as directed. Make: Densons/ M Seal/ Raychem/ Siemens / Birla 3M/ Mahindra & Mahindra

Material and labour for straight Through Heat shrinkable type Cable Joint Kit including Jointing Materials for making Joints of LT UG Electric Cable 1100 B44Volt Grade Heavy Duty with XLPE insulated Aluminium Stranded Conductor of size 70 to 120 Sqmm x 3½ Core and Testing complete all as specified and as directed. Make: Densons/ M Seal/ Raychem/ Siemens / Birla 3M/ Mahindra & Mahindra

Refixing of old serviceable , MCCBs at any location with necessary acessories Screws,Nuts etc, all as specified and directed by Engr-in-Charge. Note-: Rate inclusive of Necessary lugs of respective size of cable is deemed to be included by the contractor.

Supply and Fix in repairs low voltage standard duty Power capacitors of 25 KVAR , 3 phase. suitable for 440 Volt AC,3 phase ,50 Hz confirming to IS:13340-1993, self healing type, Standard Duty box type capacitors, should be inbuilt over pressure disconnector, shock hazard protected terminals complete all as specified and as directed. Make: L&T / Havells / Schneider / ABB / Legrand / Siemens / Epcos/ GE

All as per item No 32 described here-in-before but of capacity 10 KVAR, 3 phase

All as per item No 32 described here-in-before but of capacity 5 KVAR, 3 phase

All as per item No 32 described here-in-before but of capacity 7.5 KVAR, 3 phase

All as per item No 32 described here-in-before but of capacity 3 KVAR, 3 phase

All as per item No 32 described here-in-before but of capacity 2 KVAR, 3 phase

Supply and fix , Current Transformer of ratio 400/5A with frequency 50Hz, class 1.0 voltage ranging upto 660 Volts, having long life expectancy, shock hazard, including taking down old unserviceable Current Transformer complete all as specified and directed by Engr-in-Charge. Make- Schneider, L&T, Siemens, AE, Crompton Greeves, Mumbai

Supply and fix , Current Transformer of ratio 800/5A with frequency 50Hz, class 1.0 voltage ranging upto 660 Volts, having long life expectancy, shock hazard, including taking down old unserviceable Current Transformer complete all as specified and directed by Engr-in-Charge. Make- Schneider, L&T, Siemens, AE, Crompton Greeves, Mumbai

Supply and fix , Current Transformer of ratio 200/250/5A with frequency 50Hz, class 1.0 voltage ranging upto 660 Volts, having long life expectancy, shock hazard, including taking down old unserviceable Current Transformer complete all as specified and directed by Engr-in-Charge. Make- Schneider, L&T, Siemens, AE, Crompton Greeves, Mumbai

Decarbonising of LT Panel board / Feeder pillar boxes by CTC( Carbon Tetra Chloride), removing the carbon deposited inside the panel, cleaning the panel with cotton waste, applying one coat of becktol red solution, checking the faults inside the panel board , charging the LT Panel post completion of decarbonisation complete all as specified and directed by Engr-in-Charge. . Notes : a) Proper shut down shall be taken prior the commencement of work . b) Contractor shall provide CTC, Cotton waste and Dr Bectol solution for performing the decarbonisation. c) Fabrication of LT Panels for broken hinges shall be rectified. d) Painting the LT Panel with synthetic enamel paint ( 2 coats) over one coat of red oxide primer.

Material & Labour for cleaning of E/M installations / campus, surface dressing or trimming of branches of trees, cutting/ dressing of natural grass from ground to remove small unequalities, n.exc 15 cm deep ( including removing vegetation / shrubs / brush wood / under-growth ), cleaning of drains & carrying away the rubbish to a distance of n.exc 50 mtr away complete, the area of installation up to 700sqm. at least 2 times in each installation at a interval of 3 months complete all as specified and directed by Engr-in-Charge.

Supply and fix in replacement of multifunctional meter in existing panel/ feeder 3 phase 4 wire CT operated with necessary CT copper wournt out of rating 300/5 Amps for 3 phase, 15 VA, Class-I accuracy suitable for recording KWH, KVA, KW, kVAh, PF etc, flush mounted 96x96mm, input voltage measurement range 50-520 VAC, including necessary wiring for connections complete all as specified and directed by Engr-in-Charge. Make: L&T Cat No. WL4405110000 / Automatic Electrical (AE)/ Havells/ Enercon/ Secure Meter

Refixing / relaying of existing disturbed / uprooted existing LT electric cable of size upto 300 Sqmm to the existing places like uprooted from ground or out with the steel saddles from ground level to four storey bldg distribution box,etc complete with using electric drill machine, nut & bolt and proper grouted including excavation and returning and filling and necessary length DWC pipe of suitable size complete all as specified and directed by Engr-in-Charge.

Supply and fix aluminium thimble (Lugs) in replacement suitable for Cable of size upto 400sqmm, including taking down burnt / unserviceable lugs from the LT Panel board complete all as specified and directed by Engr-in-Charge. Make : Dowells

Material and labour for welding broken doors of LT Panels (front and rear door) including replacing the required new hinges, nuts and bolts, locking arrangement and refixing the covers without disturbing the existing electric system complete all as specified and directed by Engr-in-Charge..

Supply and fix in repairs analog timer switch, single phase, 240 volt AC complete all as specified and as directed by Engineer-in-Charge. Make : L&T Cat part no. J6107B204 or equivalent Models of Havels/crompton/schneider/ABB/ Crompton Greeves/ AREVA T&D India Ltd/ C & S Electric as approved by GE

Supply and fix in repairs ML-3, Three pole power contactor, 40 Amps rating, coil voltage 240V, 50 Hz complete all as specified and as directed by Engineer-in-Charge. Make: L&T Cat Part No CS97075 or equivalent of Havells/ Siemens/ABB/Crompton Greaves/ GE/ BCH as approved by GE

Supply and fix galvanised iron pipe, light grade, 40mm bore for cable protection on wall, trenches, road crossings etc. with suitable size of GI saddle, wherever necessary complete all as specified and as directed by Engineer-in-Charge. Make: Tata/ Jindal/ BST/ Surya/ KS Engineering/ Zenith/ Swastik/ Prakash

Supply and lay double wall corrugated (DWC) HDPE pipe 40mm outer dia , as per IS-16205 including couplers and bend for cable protection laid in trenches etc complete all as specified and as directed by Engineer-in-Charge Make : TELEREX 450N/ Rex Polyextrusion Ltd/ Finolex/ Prince Pipes and fittings ltd/Kisan/Supreme/JAIN IRRIGATION SYS/ Astral

Supply, install, test and commission LED street light fitting 70 watts rating, separate individual peanut plated lens and aluminium reflector housing made of LM6 pressure die cast aluminium. Optical cover toukghned glass only, impact resistance>IK05 IP protection not less than IP66, protection should be class I vibration as per IEC 60598, product standard IS 10322/IEC60598, all the component such as driver, surge protector should be of same make , driver should be moulded type with operating voltage 140V-270V, driver frequency 50 Hz, Lumen output should not be less than 110 lumen/watt and luminaire driver ckt, moulded type weather proof construction with separate surge protection device 5 KA rating and separate connector block for termination of incoming cable connection all as specified and directed by Engineer-in-Charge. Make - Crompton Cat part No - LSTP-72-CDL-M or Equivalent of Osram / Philips / General electric (GE) as approved by GE

Supply, install, test and commission LED street light fitting 90 watts, rating, separate individual peanut plated lens and aluminium reflector housing made of LM6 pressure die cast aluminium. Optical cover toughned glass only, impact resistance>IK05 IP, protection not less than IP66, protection should be class I vibration as per IEC 60598, product standard IS 10322/IEC60598, all the component such as driver, surge protector should be of same make, driver should be moulded type with operating voltage 140V-270V, driver frequency 50 Hz power factor >0.9, Lumen output should not be less than 130 lumen/watt and luminaire driver ckt, moulded type weather proof construction with separate surge protection device 5 KA rating and separate connector block for termination of incoming cable connection all as specified and directed by Engineer-in-Charge. Make - Crompton Cat part No - LSTP-90-CDL-M or Equivalent of Osram / Philips / General electric (GE)

Supply and erect 7 meter long hot dipped galvanised OCTAGONAL street light pole with one single light bracket for street light, the bottom of Pole shall be 130mm dia and top shall be 70mm dia with 3mm thickness, high tensile strength confirming to BS EN 10025. Base plate shall be 220x220x12mm with 4 Nos of anchor bolt 'J' type 700mm long 20mm dia with nut, washer and bolt shall be inserted to RCC footing. The pole shall have internal in built Junction box including 3 phase busbar and one 6 Amp MCB complete including necessary earth work excavation in hard/dense soil, PCC 1:4:8 for foundation, RCC M-20 concrete footing with reinforcement, formwork etc complete all as per mafucturer's instructions and as directed by Engineer-in-Charge. Note: (i) The unit quoted rate shall deem to be included for earth work excavation in hard/dense soil, PCC 1:4:8 for foundation, RCC M-20 concrete footing with reinforcement & formwork. Make- Bajaj/ Utkarsha India/ Bombay Tubes & Pole Co.

Supply & Fix in repairs SMC/ FRP Cable Junction box side hinged type with inside dimensions 240x130x95 mm in size, with pole mounting arrangement for outdoor installation suitable for 3 Phase 4 core wire incoming including 6 Amp SP MCB complete all as directed and specified by Engineer In Charge. Make: Sintex Model : GSJB- 2817 or equivalent model in Hensel/ National

Supply and fixing 3 core PVC insulated and unsheathed 1100 volt grade multicore cable 1.5 sqmm with stranded copper conductor cable drawn inside the pole whereas required with making necessary holes on bottom and top of pole from looping box to security light fitting etc including taking down old unserviceable complete all as specified and as directed by Engineer-in-Charge. Make: Havells/ Finolex/ Nicco/ Plaza/ Anchor/ Polycab/ RPG/ GLOSTER/ RR Kabel/ KEI Note : Necessary rates for conduit pipe and clamps to fix in walls is deemed to quoted by contractor

Supply & Fix beautification lights, LED rope type, white, Green & Orange colour with necessary driver and wounded on steel tubular pole maintaining tri colour complete all as specified and as directed by Engineer-in-Charge

Supply and fix 15 W new generation, post-top, energy saving, environmental friendly, long life aesthetically designed with symmetrical light distribution, spun aluminium landscape luminaire with high power leds as light source including taking down old unserviceable complete all as specified and as directed by Engineer-in-Charge. Make: Havells Cat Part No RUBYMINIPT15WLED757PSYMTOPC or equivalent WIPRO/BAJAJ/PHILIPS as approved by GE Note : (a) Rate quoted by the contractor include Painting to existing GI Pipe (above which light to be fixed) with two coats of Black paint over one coat of red oxide. (b) Necessary grouting with PCC 1:3:6 for foundation and coping of size 25 x 20 cm for fixing of new/ existing poles (above which light to be fixed) and Junction boxes shall deemed to be included rate quoted by the contractor.

Supply and fix LED flood light 100 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp complete all as specified and as directed by Engineer-in-Charge. Make: Make Phillips Cat No BVP 182 LED 100 CW FG WB or equivalent of Wipro//General Electric (GE)/ Bajaj as approved by GE

Labour only for servicing of 60 KVA DG Set with draining out of engine oil/lubricant coolant, taking out of unserviceable Oil Filter element, Fuel filter element, fuel flexible pipe, V belt for water pump and alternator, air filter element, cleaning of Fuel tank, filling of oil, lubricant etc complete all as specified and as directed by Engineer-in-Charge. Make : Kirloskar. (Location. : Kandivali) Note : Spares and lubricant, oil shall be measured and paid separately as supply only under respective items here-in-after.

Supply only Fuel Filter element

Supply only Lub Oil Filter element

Supply only Air Filter Element (Inner & Outer)

Supply only 'V' Belt

Supply only Hose pipe

Supply only Engine oil 15W40 to top-up/refilling of 60 KVA DG set as per the standard practice. (Make: Servo / Castrol / HP / Valvoline.

Supply only of coolant suitable for DG set Make: Castrol / Servo / Purokool / K-Kool)

Supply and fix maintenance free lead acid battery, 12 volt 150 AH all as specified and as directed. Make: Exide or Amaron.

Dismantling of self starter and provision of rewinding and refixing the same all as per manufacturer's instructions and as directed by Engineer-in-Charge .

Supply and fix LED gate light IP65 aesthetically appealing vintage LED warm white colour having system wattage of 40 watt with smart LED auto dimmable to upto 25% of rated wattage, on detection of movement/occupancy. gate light made of Cast aluminium, including taking down of old U/S lamp complete all as specified and directed by engr-in-charge. Make : Shakti Cat Part No. SZPGCMX040-ISS or equivalent in Havells/ Crompton/ Phillips as approved by GE Note : (a) Rate quoted by the contractor include Painting to existing GI Pipe (above which light to be fixed) with two coats of Black paint over one coat of red oxide primer. (b) Necessary grouting with PCC 1:3:6 for foundation and cooping of size 25 x 20 cm for fixing of new/ existing poles (above which light to be fixed) and Junction boxes shall deemed to be included rate quoted by the contractor.

Supply and fix in repairs electronic LED driver suitable for LED Light 72 watt, IP65 ingress protection isolated metal potted, with wide input range complete all as specified and directed by Engr-in-Charge. Make- Phillips/ Crompton/ Wipro

Supply and fix in repairs for electronic LED driver suitable for LED Light 90 watt IP65 ingress protection isolated metal potted, with wide input range complete all as specified and directed by Engr-in-Charge. Make- Phillips/ Crompton/ Wipro

Supply and fix in repairs for electronic (Metal Core Printed Circuit Board) MCPCB suitable for LED Light 72 watt complete all as specified and directed by Engr-in-Charge. Make- Phillips/ Crompton/ Wipro

Supply and fix in repairs for electronic (Metal Core Printed Circuit Board) MCPCB suitable for LED Light 90 watt to 100 watt complete all as specified and directed by Engr-in-Charge. Make- Phillips/ Crompton/ Wipro

Material and labour for complete removal of existing paint of steel tubular / rail poles length up to 9 mtr including preparation of outer surface and applying two coats of aluminium paint over a coat of red oxide and two strip of yellow and black colour paint of size 30 cm width from bottom of pole height 30 cm, including numbering to pole with base paint of yellow colour and Black for numbering, not be less than 100 mm in height and 10 mm in width complete all as specified and as directed by Engineer-in-Charge Make- Asian Paints/ Nerolac Paints/ Dulux ( Akzonobel)/ Nippon Paint India Pvt Ltd

Supply and fix feeder pillar box suitable for out door installations of size 450x600x600mm complete with clamps made out of 40mmx6mm thick with suitable nuts, bolts etc, painting with one coat of red oxide primer and two coats of synthetic enamel paint over it complete incoming and out going cable entries including necessary fixing arrangement as per site requirement and the following accessories housed in etc complete all as specified and as directed by Engineer in Charge. (a) MCCB 4 pole ,Ics=100%Icu- 16 KA, 415 Volts, 63 Amps with thermal adjustable and fixed magnetic setting with extended terminals - 01 Nos. (b) MCB TPN, 32 Amps , 415 volts,10 KA- 2 Nos (c) Digital timer switch, single phase, 110- 240 volt AC, TSQ 100-1No (d) Four pole, power contactor 40 Amps rating, coil voltage 240V, 50HZ- 1 no (e) Volt coil, 60 Amps capacity-01 No (f) Toggle switch for bypassing the timer switch-01 No

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, (fittings such as switches, ceiling roses, pendants, regulators sockets etc. to be measured separately), removing materials out side MD land after Credit for the same is recovered by the dept and making good disturbed surfaces of walls, floors, etc., all as specified and as directed.

Taking down of old DBs with MCB / fuses of any size and rating complete from the position after disconnecting the electrical connection all as specified and as directed.

Material and labour for Point wiring for complete with PVC insulated FRLS cable 1100 volts grade with multi stranded copper conductor conforming to IS-694, 1.5sqmm (nominal area) drawn through and including non metallic PVC casing / capping (not less than 20mm wide) (ISI marked) and accessories on surface of wall/roof with sunken type pressed steel/welded terminal boxes made out of 1.6mm mild steel sheet, 3mm thick laminated sheet cover for mounting of switches, socket outlets, regulators etc., including provision of PVC insulated FRLS cable 1100 volts grade with multi stranded copper conductor 1.5sqmm as earth continuity conductor and connecting to common earth dolly complete all as specified and as directed for one light /fan/ exhaust fan/ bell point controlled by one, one way switch complete all as specified and as directed by Engineer-in-Charge. Make of Cable- Havells/ Finolex/ Nicco/ Plaza/ Anchor/ Polycab/ RPG/ GLOSTER/ RR Kabel/ KEI as approved by GE Make of PVC Casing Capping-Precision/ Modi/ Presto Plast/ Supreme/ Polycab/ Plaza/ Pressfit

All as per item No.78 here-in before but for one light controlled by 2, two way switches

All as per item No.78 here-in before but One 3 pin, 5/6 Amps switch socket combination point on the independent board controlled by one, one way switch.

All as per item No.78 here-in before but for one 3 pin, 5/6 Amps switch socket combination point, on same board with other switches controlled by one, one way switch.

All as per item No.78 here-in before but for 3 pin 15/16 Amps switch socket combination, on independent board with 2.5sqmm copper cable and provision of 2.5sqmm PVC insulated FRLS cable 1100 volts grade with multi stranded copper conductor for earth continuity conductor connected to common earth dolly connecting up to fittings complete all as specified and as directed by Engineer-in-Charge.

All as per item No.78 here-in before but for 20/25 Amps power unit on independent board with 4 Sqmm copper cable and provision of 4 Sqmm PVC insulated FRLS cable 1100 Volts grade with multi stranded copper conductor for earth continuity conductor complete all as specified and as directed by Engineer-in-Charge.

Material and labour for Point wiring for complete with PVC insulated FRLS cable 1100 volts grade with multi stranded copper conductor conforming to IS-694, 1.5sqmm (nominal area) drawn through and including non metallic PVC conduit 20mm dia (ISI marked) and accessories laid on surface of wall/roof with sunken type pressed steel/welded terminal boxes made out of 1.6mm mild steel sheet for mounting of switches, socket outlets, regulators etc., including provision of PVC insulated FRLS cable 1100 volts grade with multi stranded copper conductor 1.5sqmm as earth continuity conductor and connecting to common earth dolly for one light /fan/ exhaust fan/ bell point controlled by one, one way switch complete all as specified and as directed by Engineer-in-Charge. Make of Cable- Havells/ Finolex/ Nicco/ Plaza/ Anchor/ Polycab/ RPG/ GLOSTER/ RR Kabel/ KEI as approved by GE Make of PVC conduit-Anchor/ Modi/ Presfit/ Precision/ Astral/ Panasonic Anchor/ Polycab

All as per item No.84 here-in before but One 3 pin, 5/6 Amps switch socket combination point on the independent board controlled by one, one way switch.

All as per item No.84 here-in before but for one 3 pin, 5/6 Amps switch socket combination point, on same board with other switches controlled by one switch.

All as per item No.84 here-in before but for 3 pin 15/16 Amps switch socket combination, on independent board with 2.5sqmm copper cable and provision of 2.5sqmm PVC insulated FRLS cable 1100 volts grade with multi stranded copper conductor for earth continuity conductor connected to common earth dolly connecting up to fittings complete all as specified and as directed by Engineer-in-Charge.

All as per item No.84 here-in before but for 20/25 Amps power unit, on independent board with 4sqmm copper cable and provision of 4sqmm PVC insulated FRLS cable 1100 volts grade with multi stranded copper conductor for earth continuity conductor connected to common earth dolly connecting up to fittings complete all as specified and as directed by Engineer-in-Charge.

Cutting chases with dust free cutting machine, pinning in, making good the disturbed surface of wall/ceiling and pointing in cement mortar 1:3 to cutting chases for concealed conduit wiring etc. and making good etc, not exceeding 10 cm girth complete all as specified and as directed by Eng-in-charge

Supply and fix 100 watts LED high bay light fitting, 230 volts, 50Hz, AC supply complete with all accessories internally prewired and including electrically connection with cable of size 0.5 Sqmm (nominal area) including hanging arrangements and taking down existing light fittings etc complete all as specified and as directed by Engineer-in-Charge. Make : Philips Cat part No BY515P LED150S, Syska Cat Part No : UFO-E HI-BAY 100W and Bajaj Cat part No BGHBM 100WLED XE, as approved by GE.

Supply and fix in repair 4ft, 6500K surface mounted, 20 watt rechargeable inverter LED batten with automatic DC mode feature on power failure and connecting up with copper 3 core flexible cord of min size 0.5 sqmm complete all as specified and as directed by Engr-in-Charge. Make- Havells PRIDE Plus Inveter Batten 20 W LED 6500 K, LHEXACP7FN1W020 or equivalent model of Phillips/Bajaj/Shakti, as approved by GE.

Supply and fix LED lights fitting 1x 20 W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose including 02 Nos of PVC square /round boxes , screws clips including taking down existing light fittings etc complete all as specified and as directed by Engineer-in-Charge. Make: Phillips Cat No BNO21C LED20S PSU CW GR S2 or equivalent of Havells cat part No LHEXARP7SN1W020 / Bajaj, as approved by GE.

Supply and fix LED tube rod 1x20W, 220V, AC to be fixed in existing tube light fitting with necessary modification of connection including taking down existing light fittings etc complete all as specified and directed by Engineer-in-Charge. Make: Havells Cat part No. LHLDDCXCML8Q020 or equivalent in Bajaj/Phillips

Supply and fix LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size including taking down existing light fittings etc complete all as specified and as directed by Engineer-in-Charge. Make : Phillips Cat No RC380B LED36S -6500 G4 L60 W60 PSU OD or equivalent of Havells / Crompton Greaves.

Supply and fix LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size including taking down existing light fittings etc complete all as specified and directed by Engr-in-charge. Make : Havells Cat No LHEXACP5IN1W010 or equivalent of Philips / Bajaj.

Supply and fix round/Square shape 24 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp including connecting up with three core flexible copper conductor cable of suitable size including taking down existing light fittings etc complete all as specified and as directed by Engineer-in-Charge. Make: Havells Cat No LHEBAEP7IZ1W024 or equivalent of Philips / Crompton Greaves

Supply and fix Switch Piano, flush type, single pole, one way, 5 Amps, 240 volts, ISI marked complete all as specified and as directed by Engineer-in-Charge. Make: Panasonic Anchor/ Crabtree/ Leader/ Legrand/ Havells/ C & S Electric

Supply and fix Switch Piano, flush type, single pole, two way, 5 Amps, 240 volts, ISI marked complete all as specified and as directed by Engineer-in-Charge. Make: Panasonic Anchor/ Crabtree/ Leader/ Legrand/ Havells/ C & S Electric

Supply and fix Switch bell push, flush type, single pole, one way, 5 Amps, 240 volts, ISI marked complete all as specified and as directed. Make: Panasonic Anchor/ Crabtree/ Leader/ Legrand/ Havells/ C & S Electric

Supply and fix Call bell electric (Ding Dong type) suitable for working on 230 volts AC supply multi music type complete all as specified and as directed. Make: Panasonic Anchor/ Crabtree/ Leader/ Legrand/ Havells/ C & S Electric

Supply and fix Ceiling rose, surface type Bakelite, three terminal PVC/polycarbonate isolated body, 65x32mm, ISI marked complete all as specified and as directed by Engineer-in-Charge. Make: Panasonic Anchor/ Crabtree/ Leader/ Legrand/ Havells/ C & S Electric

Supply and fix switch socket outlet, combination 2 in 1, 5 Pin, 5 Amps, flush type, universal ISI marked complete all as specified and as directed by Engineer-in-Charge. Make: Panasonic Anchor/ Crabtree/ Leader/ Legrand/ Havells/ C & S Electric

Supply and fix switch socket outlet, combination 5 in 1, 3 Pin, 5/15 Amps, flush type, universal ISI marked complete all as specified and as directed by Engineer-in-Charge. Make: Panasonic Anchor/ Crabtree/ Leader/ Legrand/ Havells/ C & S Electric

Supply and fix stepped type electronic fan regulator on existing phenolic laminated sheet,100W, 230 V etc complete all as specified and as directed by Engineer-in-Charge. Make: Anchor/ Havells/ Bajaj/ Usha/ Khaitan/ GEC/ Legrand

Supply and fix SPN sheet metal enclosures with two pin and earth plug and socket, controlled by MCB SP 20Amps, 240 Volts complete all as specified and as directed by Engineer-in-Charge. Make:Larsen &Toubro/ ABB/ Siemens/ Schneider/ Havells/ Legrand/ Indo ASIAN/ C & S Electric/ BhartiaCuttler Hammer (BCH)

Supply and fix Sheet metal enclosure concealed in the wall for 12 way Distribution Boards (DB’s), double door, single pole & neutral with 100 amps rated bus bar, suitable for fixing MCBs/RCBOs complete all as specified and directed. Make:Larsen &Toubro/ ABB/ Siemens/ Schneider/ Havells/ Legrand/ Indo ASIAN/ C & S Electric/ BhartiaCuttler Hammer (BCH)

Supply and fix in repairs double door, sheet metal enclosure, powder coated concealed in the wall for MCB DB SPN 8 way fitted with neutral link, earth bar , din rail and 100 amps rated bus bar 230 volt conforming to IS 13032-1991, incl. taking down complete all as specified. Make:Larsen &Toubro/ ABB/ Siemens/ Schneider/ Havells/ Legrand/ Indo ASIAN/ C & S Electric/ BhartiaCuttler Hammer (BCH)

Supply and fix double door, sheet metal enclosure, powder coated concealed to the wall for MCB DB SPN 4 way fitted with neutral link, earth bar , din rail and 100 amps rated bus bar 230 volt conforming to IS 13032-1991 complete incl. taking down all as specified. Make:Larsen &Toubro/ ABB/ Siemens/ Schneider/ Havells/ Legrand/ Indo ASIAN/ C & S Electric/ BhartiaCuttler Hammer (BCH)

Supply and fix in repairs double door, sheet metal enclosure, powder coated concealed to the wall for MCB DB TPN 4 way fitted with neutral link, earth bar , din rail and 200 amps rated bus bar 415 volt conforming to IS 13032-1991 incl. taking down complete all as specified. Make:Larsen &Toubro/ ABB/ Siemens/ Schneider/ Havells/ Legrand/ Indo ASIAN/ C & S Electric/ BhartiaCuttler Hammer (BCH)

Supply and fix single door, sheet metal enclosure powder coated DB VTPN 4 way with 200 Amps rated bus bar, 415 volt, vertical type, IP 43 protection with provision for DPX 125 MCCB as incomer and SP/TP MCB as outgoing, flush in walls including making good of disturbed surface to match with existing surface complete all as specified and as directed by Engineer-in-Charge. Make: Havells Cat part No. DHDLVSRWGOFO04 or equivalent of Legrand / Larsen &Toubro/ ABB/ Siemens/ Schneider/ Indo ASIAN/ C & S Electric/ Bhartia Cuttler Hammer (BCH) as approved by GE

Supply and fix in repairs MCCBs 125 Amps, 25 KA, 4 pole with adjustable thermal and adjustable magnetic settings complete all as specified and as directed by Engineer-in-Charge. Make : Cat Part No 420055 of Legrand or equivalent of Larsen &Toubro/ ABB/ Siemens/ Schneider/ Havells/ Legrand/ Indo ASIAN/ C & S Electric/ Bhartia Cuttler Hammer (BCH) as approved by GE

Supply and fix in repairs MCB TPN, 40 Amps to 100 Amps, 415 volts,10 KA including taking down old unserviceable complete all as specified and as directed by Engineer-in-Charge. Make : Larsen &Toubro/ ABB/ Siemens/ Schneider/ Havells/ Legrand/ Indo ASIAN/ C & S Electric/ Bhartia Cuttler Hammer (BCH)

Supply and fix in repairs MCB SPN, 32 Amps, 240 volts,10 KA including taking down old unserviceable complete all as specified and as directed by Engineer-in-Charge. Make : Larsen &Toubro/ ABB/ Siemens/ Schneider/ Havells/ Legrand/ Indo ASIAN/ C & S Electric/ Bhartia Cuttler Hammer (BCH) as approved by GE

Supply and fix in repairs MCB SP, 6 Amps to 32 Amps, 240 volts,10 KA including taking down old unserviceable complete all as specified and as directed by Engineer-in-Charge. Make : Larsen &Toubro/ ABB/ Siemens/ Schneider/ Havells/ Legrand/ Indo ASIAN/ C & S Electric/ Bhartia Cuttler Hammer (BCH) as approved by GE

Material and labour for submain wiring complete with and including 2 runs of 6.0sqmm, single core FRLS, PVC insulated and unsheathed, multistranded, copper conductor cable, single core, 1100 Volts grade drawn through and including non metallic PVC conduit, heavy duty of suitable size including accessories etc as required and fixed on walls and 6.0sqmm PVC multistranded copper conductor cable for earthing and connected to common earth dolly including taking down the existing submain wiring complete all as specified and as directed by Engineer-in-Charge. Note : Two runs of 6.0sqmm PVC insulated cable and one run of 6.0sqmm cable and one run of PVC conduit shall be measured as one unit length. Make of Cable- Havells/ Finolex/ Nicco/ Plaza/ Anchor/ Polycab/ RPG/ GLOSTER/ RR Kabel/ KEI as approved by GE Make of PVC conduit-Anchor/ Modi/ Presfit/ Precision/ Astral/ Panasonic Anchor/ Polycab

Material and labour for submain wiring complete with and including 2 runs of 4.0sqmm, single core FRLS, PVC insulated and unsheathed, multistranded, copper conductor cable, single core, 1100 Volts grade drawn through and including non metallic PVC conduit, heavy duty of suitable size including accessories etc as required and fixed on walls and 4.0sqmm PVC multistranded copper conductor cable for earthing and connected to common earth dolly including taking down the existing submain wiring complete all as specified and as directed by Engineer-in-Charge. Note : Two runs of 4.0sqmm PVC insulated cable and one run of 4.0sqmm cable and one run of PVC conduit shall be measured as one unit length. Make of Cable- Havells/ Finolex/ Nicco/ Plaza/ Anchor/ Polycab/ RPG/ GLOSTER/ RR Kabel/ KEI as approved by GE Make of PVC conduit-Anchor/ Modi/ Presfit/ Precision/ Astral/ Panasonic Anchor/ Polycab

Supply and fix in repairs LED flood light 100 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp complete all as specified and as directed by Engineer-in-Charge. Make: Make Phillips cat no-BVP183 LED10 CW FG WB /Wipro//General Electric (GE)/ Bajaj

Material and labour for Earthing complete with Galvanised steel earth plate electrode 60 cm x 60 cm x 6.0 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of earth the plate not less than 1.5 metres below normal ground level, connected to and including galvanised earth lead wire 4 mm dia, 7.5m long, duly protected by 15mm dia light grade GI pipe upto test point terminal block by means of bolts, nuts, check nuts and washers made out of galvanized iron or steel with provision of charcoal & common salt not less than 50Kg, in each earthing packed up to maximum 30 cm on both side of plate with pouring of benzonite powder earthing chemical, not less than 20Kg in each earthing packed upto maximum 30cm on both sides of plate and GI strip protected by 40mm bore light grade galvanized iron pipe complete all as shown in electrical plate No. 3 of MES schedule Part I, 2009 with PCC 1:2:4, type B1 in chamber wall with CI cover and frame, watering pipe of size 20mm dia medium grade, 0.63mm thick GI sheet funnel with wire mesh and engraving of earth marking on nearby structure/ building with cement mortar 1:4 plate of size 200mm x 150mm x 15mm thick including necessary excavation and earth work in any type of soil/strata & testing complete all as specified and as directed by Engineer-in-Charge. Note :- (i) Contractor should submit test report of earthing after installation to Engineer -in-Charge

Material and labour for point wiring with proper colour coding complete with and including PVC insulated unsheathed, flexible bright annealed multi stranded copper conductor single core FRLS cable 1.5 Sqmm (22/0.30) 1100 volt grade confirming to IS 694 drawn through in and including (medium grade) rigid non metallic PVC conduit pipe 25 mm size ISI marked with conduit accessories / fittings / junction box / inspection covers etc of ISI marked and cutting chases for concealed conduit with all surfaces by means of screws and sunk / cup washers, with Modular metal flush box including white cover plate with frame for mounting of switches sockets fan regulators etc including provision of PVC insulated FRLS cable 1100 volts grade with PVC insulated unsheathed, flexible bright annealed multi stranded copper conductor single core FRLS cable 1.5 Sqmm as earth continuity conductor and connecting to common earth dolly for one light /fan/ exhaust fan/ bell point controlled by one, one way switch complete all as specified and as directed by Engineer-in-Charge. Make of Cable- Havells/ Finolex/ Nicco/ Plaza/ Anchor/ Polycab/ RPG/ GLOSTER/ RR Kabel/ KEI as approved by GE Make of PVC conduit-Anchor/ Modi/ Presfit/ Precision/ Astral/ Panasonic Anchor/ Polycab

All as per item No.119 here-in before but One 3 pin, 5/6 Amps switch socket combination point on the independent board controlled by one, one way switch.

All as per item No.119 here-in before but for one 3 pin, 5/6 Amps switch socket combination point, on same board with other switches controlled by one switch.

All as per item No.119 here-in before but for 3 pin 15/16 Amps switch socket combination, on independent board with 2.5sqmm copper cable and provision of 2.5sqmm PVC insulated FRLS cable 1100 volts grade with multi stranded copper conductor for earth continuity conductor connected to common earth dolly connecting up to fittings complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repairs Modular type fan regulator rotary step deluxe, 240 volt, 50Hz all as specified and as directed by Engineer-in-Charge. Make: Anchor Roma/ Legrand/ Crabtree/ Havells/ Indo Asian/ Polycab/ Larsen &Tubro/ Panasonic Anchor

Supply and fix in repairs Modular type switch socket outlet combination 2 in 1, 3 Pin, 16 Amps, flush type, universal ISI marked complete all as specified and as directed by Engineer-in-Charge. Make: Anchor Roma/ Legrand/ Crabtree/ Havells/ Indo Asian/ Polycab/ Larsen &Tubro/ Panasonic Anchor

Supply and fix in repairs Modular type switch socket outlet combination 2 in 1, 3 Pin, 5 Amps, flush type, universal ISI marked complete all as specified and as directed by Engineer-in-Charge. Make: Anchor Roma/ Legrand/ Crabtree/ Havells/ Indo Asian/ Polycab/ Larsen &Tubro/ Panasonic Anchor

Supply and fix in repairs Modular type switch socket outlet combination 2 in 1, 3 Pin, 6 Amps, flush type, universal ISI marked complete all as specified and as directed by Engineer-in-Charge. Make: Anchor Roma/ Legrand/ Crabtree/ Havells/ Indo Asian/ Polycab/ Larsen &Tubro/ Panasonic Anchor

Supply and fix in repairs Modular type switch single pole one way 6 Amps, flush type, ISI marked complete all as specified and as directed by Engineer-in-Charge.Make: Anchor Roma/ Legrand/ Crabtree/ Havells/ Indo Asian/ Polycab/ Larsen &Tubro/ Panasonic Anchor

Supply and fix in repairs Modular type switch single pole one way 16 Amps, flush type, ISI marked complete all as specified and as directed by Engineer-in-Charge. Make: Anchor Roma/ Legrand/ Crabtree/ Havells/ Indo Asian/ Polycab/ Larsen &Tubro/ Panasonic Anchor

Supply and fix angle holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and as directed by Engineer-in-Charge. Make: Panasonic Anchor/ Crabtree/ Leader/ Legrand/ Havells/ C & S Electric

Supply and fix indoor Decorative light, wall mounting, Metal, glass Chrome ,220-240 V with B22 LED Bulb of 12 watts complete all as specified and as directed by Engineer-in-Charge. Make : Philips 58184 platina model No. - 34303/11C/86 or equivalent in Bajaj/ wipro

Note: Deduct Credit for demolished / dismantled material of Rs. (-) 1,34,416.00 (Minus) as listed in Schedule of Credit. Tenderers will not quote against this item being a tentative amount to be considered to arrive at the 'Contract Sum'

ELECTRO ASSOCIATES (BID ID -3121964)

Chaudhary Enterprises (BID ID -3109993)

Radha Engineering Services (BID ID -3104431)