Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹11.7 LAccepted-AOC | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹12.0 L+₹29,720.15 (2.55%)Rejected-AOC | L2 | Rejected-AOC 2nd Lowest Bidder |
Tender Value
₹13.9 L
EMD Value
₹13,900
Closing Date
21 Oct 2024, 3:00 pmClosed
COMMISSIONER
AVADI CITY MUNICIPAL CORPORATION AVADI CHENNAI 54
Construction of compound wall and providing play material at tnhb sector 2 palvadi in Ward no. 41
2024_MAWS_493903_1
ROC No 7763/2024/E1-12
Open Tender
Civil Works
Fixed-rate
60 days
WARD NO 41
Please refer Tender documents.
1 document required · 1 mandatory
₹0
₹13,900
23 Dec 2024
15 Oct 2024
21 Oct 2024
15 Oct 2024
21 Oct 2024
15 Oct 2024
Amount
Conveyence of excavated silt up to lead of 3km from the work site including loading, unloading, transporation charges and incidental charges by 3unit capacity tipper lorry with driver and fuel charges for diesel and labour charges for dirver.
Earth work excavation in all classes of soil except sand and rock such as hard stiff clay black cotton soil murrums hard red earth hard gravelly soil etc complete
Supply, delivery and filling with sand from approved quarry in layer not more than 15 cm thick including watering with all layers and consolidation complying with standard specifications including cost and conveyance of sand at site and labour chrages and all other incidental charges etc., complete as per standard specifications
Plain Cement Concrete 1:4:8 (one cement four fine aggregates and eight coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges etc., complete as per standard specification
Supply, delivery and filling with good stone dust from approved quarry in layer not more than 15 cm thick including watering with all layers and consolidation complying with standard specifications including cost and conveyance of sand at site and labour chrages and all other incidental charges etc., complete as per standard specifications
Supplying and laying Rubberised interlocking Paver block M40 grade Providing and laying of 83mm thick high strength type conforming IS 15658-2006 of rubberized interlocking paver lock in size of minimum compressive strength of 40N/mm2 in uniform shape of approved make to be laid in flurring bone pattern with stone dust cushion below the uniform shap of approved non skitting surface in the top and the rate including levelling the base preparation of pavers as sub base, stone dust cushion 150mm thick laying out of pavement cut the pieces to fix the edge vibring the pavers,sweeping tranporting loading unloading of laying paver block as per standard specification,.
Providing and laying in position, Standardised Concrete Mix M-20 Grade in accordance with IS:456-2000, using 20mm and down graD/F hard broken granite stone jelly for all RCC items of works with minimum cement content of 325 kg/mᶾ and maximum water cement ratio of 0.55, including admixture (plasticiser / super plasticiser) in recommenD/F proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5 cu.m.) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 cu.m.) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m.) 7670 kg. of sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS Standards. (No separate payment will be made by the Department for the excess usage of materials).
Supply and fabrication of steel using TMT & RTS bars with including cost and conveyance of all materials and including all labour charges etc complete
Providing centering and shuttering works using MS sheet moulds and soffits with including cost and conveyance of all materials and including all labour charges etc complete
Brick Work in CM 1:3 mix using Second Class Ground Moulded Chamber Burnt Bricks 9 " x 4 3/8 " x 2 ¾ " size including cost and conveyance of materials and labour charges etc., complete as per standard specification. (Item No. 2b )
Plastering with CM 1:5 mix using 20mm thick including cost and conveyance of materials and labour charges etc., complete as per Standard Specification
Painting two coats with ready mixed Plastic Emulsion Paint S.I.358 Plastic emulison paint of'approved quality and colour over a priming coat, including 'thorough scrap ping,clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required - 10m2
Supply and fixing of MS steel doors and windows with including cost and conveyance of all materials and fabrication charges and fixing charges etc complete
Painting two coats using ready mix enamel paint with including cost and conveyance of all materials and including all labour charges etc complete
Supplying and fixing of Double Swing of height 2.40m height with 40mm dia MS pipes support as legs and top bar is 50mm dia. The seat is 9mm thick reinforced rubber with Antiskid chequred top with heavy ball bearing and the suspension is 7mm dia electro galvanized chain and the cost shall inclusive of all materials, labours and fixing etc, complete as directed by the departmental officers.
Supplying and fixing of four seater SEESAW to a height of 0.50m with 80mm dia leaver and 40mm top bar with MS pipes. The seatr is of moulded plastic with heavy duty bush bearing. The cost shall inclusive of all materials, labours and fixing etc complete as directed by the dpeartmetal officers
Supplying and fixing of Jungle jym The cost shall inclusive of all materials, labours and fixing etc complete as directed by the dpeartmetal officers
Supply and fixing of stainless steel slide bench has 8 feet Chute length 5.25 feet length 18 " width sliding chute on 8 feet length using 304 grade 24 gauge stainless stell plate reiforced with 18 gauge sheet riveted togeather with including cost and conveyance of all materials and all labour charges and Transportation charges fixing on site with earth work excavation leveling course and foundation concrete and Vibrant enamel coated painting etc complete
V.S.A.Enterprises (BID ID -1169447)
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .