PROVN OF BATHING POINT AND SPL REPAIR TO CHAIN LINK FENCING NEAR BLDG NO 187 AND SPL REPAIR OF SEWAGE LINE AT UMROI MIL STATION UNDER GE UMROI

Amount

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion in Natural ground, Concrete, brick work, masonry, etc and making good disturbed ground, complete all as specified and directed.

Dismantling of chain link fencing of any gauge & size exceeding 4kg/sqm, complete all as specified and directed.

Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in soft/loose Soil complete all as specified and directed

Excavating in soft/loose soil for post holes (or similar holes) each not exc 0.5 cum, getting out including returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50m and making good surface complete all as specified and directed.

Excavation in trenches n. exc. 1.5 m wide and n.exc 1.5 m in depth for foundation or for shaft, well, cesspit, manhole, pier hole etc.n. exc. 10 sq m on plan and n. exc. 1.5 m in depth and getting out in any type of soil complete all as specified and directed.

Excavation in trenches n. exc. 1.5 m wide and exc 1.5 m but n.exc 3.0 m in depth for foundation or for shaft, well, cesspit, manhole, pier hole etc.n. exc. 10 sq m on plan and n. exc. 1.5 m in depth and getting out in any type of soil complete all as specified and directed.

Returning, filling in including spreading, leveling, watering and well ramming in layers n. exc. 25cm thick in any type of soil, all as specified and directed

Removing excavated soil not exc 50m and depositing where directed at level not exc 1.5m above the starting point complete all as specified and directed.

Material and labour for hard core with broken stone or boulders of gauge 63 mm but n exc.100mm, deposited spread & levelled in layers n.exc 15 cm thick water & rammed to a true surface, complete all as specified and directed.

Material and labour for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering, complete all as specified and directed.

Material & Labour for Pre-cast cement concrete block masonry with solid blocks, exceeding 10 cm in width and setting mortar, complete With C1 Type, 1:3:6 mix, (20 mm graded aggregate) set in cement mortar 1:6 Complete all as specified & directed

Material & Labour for Rendering 15mm thick in CM 1:4 on surface of brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

Material & Labour for Rendering 15mm thick in CM 1:4 on surface of brick or concrete surfaces finished even and smooth using extra cement with using WPC as per manufacturing instruction, complete all as specified and directed.(Note:- WPC shall be measured and paid separetaly)

Supply only water proofing compound

Material & Labour for preparation of new plastered surface of wall and applying two coats of cement base paint over a coat of alkali resistant priming paint complete all as specified and directed.

Material and labour for plain cement concrete (1:4:8) type D-2 using 40 mm graded stone aggregate for foundation filling and mass concrete all as specified and directed by Engineer-in-Charge.

Material & Labour for 100 mm thick cement concrete 1:4:8 type D2 using 40 mm graded aggregate as in sub base flooring, complete all as specified and directed.

Material & Labour for 100 mm thick cement concrete 1:2:4 type B2 using 40 mm graded aggregate as in flooring including finishing even and smooth without using extra cement, complete all as specified and directed.

Forming Expansion joints 100mm deep 12mm thick, filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘A’, including cutting PCC slab if required, complete all as specified and directed.

Material and labour for plain cement concrete (1:2:4) type B-2 using 40 mm graded stone aggregate for foundation filling and mass concrete all as specified and directed by Engineer-in-Charge.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire, concrete all as specified and directed by Engineer-in-Charge.

Supply only pre painted mild steel Galvanised wire Chain link fencing qsuare mesh of size 100mm x 100mm, made out of 4.0mm dia wire, complete all as specified and directed.

Supply and fix mild steel posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 including embeding in concrete and screwing etc and nosing to steps, complete all as specified and directed.

Material & labour for Mild steel round bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Supply and fix 5 to 10 cm dia of neck Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square not exc 5cm long complete all as specified and directed.

Material & Labour applying two coats of synthetic enamel paint over a coat of red oxide primer on new or previously untreated steel surface of girth exc 10cm width or girth complete all as specified and as directed.

Supply & Fix pre painted Galvanised, 2 strand, steel barbed wire, barbed with 2.24 mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and directed.

Supply & Fix Framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc.. n exc 10 kg each brackets, conforming to Fe.410.Gde-E-165 (Brackets over 10 kg each to be measured under 'Structural Steel') complete all as specified and directed.

Suplly and fixing of Pre painted galvalume aluminium zinc coating based in corrugated/trapoziodal profile steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as per manufature instruction complete all as specified and directed.

Supply & Fixing steel water Tubing medium grade(ISI marked), 15mm bore galvanised with all fittings and fixed complete to wall and ceiling or laid in floors Complete all as specified and directed.

Supply & Fixing steel Tubes medium grade(ISI marked), 20mm bore galvanised with all fittings and fixed complete to wall and ceiling or laid in floors Complete all as specified and directed.

S&F Coloured non skid ceramic tiles 7 to 8 mm thick, area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match, includind 15mm thick screed bed cement mortar (1:6), Complete all as specified and directed.

Supply & Fixing of glazed ceramic coloured /printed tiles 350x250x 7mm thick set and jointed in neat cement slurry and pointed in coloured cement to match on verticle surface of wall, including rendering (backing coat) 10mm thick of cement mortar (1:4), Complete all as specified and directed.

Demolition and breakingup drain pipes 150mm bore (Salt glazed ware, AC or Reinforced concrete) set in cement mortar, Complete all as specified and directed.

Material and labour for 150mm dia Reinforced concrete pipes, class NP3, laid and jointed complete with collars, Complete all as specified and directed.

Material and labour for 150 mm bore Salt glazed stoneware drain pipes grade 'A' laid in trenches, tested and jointed in CM 1:1 with spun yarn, Complete all as specified and directed.

Material and labour for cement concrete 1:3:6 type C2 Concrete bed to drain pipes 150mm bore including packing under and completely surrounding pipes with concrete after they are laid and tested, Complete all as specified and directed.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided, Complete all as specified and directed.

Demolition of precast cement concrete block walling set in cement mortar, Complete all as specified and directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided, Complete all as specified and directed.

Material and labour for cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required 150 mm dia of pipe, Complete all as specified and directed.

Material and labour for precast cement concrete slab 1:2:4 (using 20 mm graded aggregate) as in cover slab set in cement mortar 1:4 including necessary formwork if required, , Complete all as specified and directed.

Material & Labour for 75 mm thick cement concrete type C2, 1:3:6, using 40 mm graded aggregate as in plinth protection, finishing cement concrete surface even and smooth without using extra cement including making proper joints with bitumen mastic with sand as per specification at an interval of 3m,, complete all as specified and directed.

Material & Labour for Cement concrete 1:3:6 (Nominal mix), Type C2 (40 mm graded aggregate) as in foundations, surface channels and drains, Complete all as specified & directed

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc., complete all as specified and directed.

Supply & Fix Stop valve 20 mm bore dia, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed, complete all as specified and directed.

Material & Labour for plain cement concrete 1:3:6, type C2, (using 40mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and directed.

Material & Labour for plain cement concrete 1:2:4, type B-1, (using 20mm graded stone aggregate) as in coping including necessary use & waste of form work complete all as specified and directed.

Supply and fix mild steel TMT bars 6 mm to 8 mm dia, cut to length, bend to shape required including cranking, bending spirally for hopping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia. or securing with clips complete all as specified and directed

Schedule of Credit

M/s Sohini Construction