Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance 103 PLATINUM PLAZA OPP IOCL PETROL PUMP NR JUDGES BUNGLOW CROSS ROAD BODAKDEV AHMEDABAD GUJARAT 380054 | AHMEDABAD | AHMEDABAD | GUJARAT | 380054 | Admitted-Finance |
| 2 | Admitted-Finance 6 VANARAI SHOPPING COMPLEX W E HIGHWAY GOREGAON E MUMBAI 400065 | MUMBAI SUBURBAN | MAHARASHTRA | 400065 | Admitted-Finance |
| 3 | Rejected-Technical MARLESHWAR APARTMENT SHOP NO 2 GROUND FLOOR NALLASOPRA EAST THANE MAHARASHTRA 401209 | PALGHAR | MAHARASHTRA | 401209 | Rejected-Technical technically not qualified |
Tender Value
₹97 L
EMD Value
₹1.9 L
Closing Date
6 Apr 2024, 4:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Project Director, INRPC, NRB, BARC
INRPC, BARC, Tarapur, Palghar, Maharashtra-401502
Supply and Installation of PMCC Panels, Building Electrification and Associated Works of Block 130 at INRP, BARC, Tarapur.
2024_NRB_797168_1
NRB/INRPC/130/ELE-53/2024/402
Open Tender
Electrical Works
Item Rate
365 days
BARC, Tarapur
Please refer Tender documents.
8 documents required · 8 mandatory
₹0
₹1.9 L
Yes
BARC, Tarapur, Palghar, Maharashtra
12 Jun 2024
26 Feb 2024
8 Apr 2024
26 Feb 2024
6 Apr 2024
7 Mar 2024
26 Feb 2024 - 4 Mar 2024
5 Mar 2024
Amount
Supply, Installation, Testing and Commissioning of following configuration 415V, 3-phase, 4 wire, double door, with R Y B Phase indication and MCB position indication through glass front, IP-54, Prewired with HFFR copper wires, horizontal type, metallic Double Door, Phase Segregated three pole and neutral MCB Distribution Board fabricated out of 2 mm thick, powder coated with RAL7035 shade, pre-galvanized G.I. sheet steel, suitable for surface mounting/installation in existing enclosure complete with appropriate rating of tinned copper bus bar/ Cu wire, neutral bus bar, earth bar, din bar, brass neutral link, brass earthing studs, phase distribution drawing, danger board, name plate, 2 mm thick removable gland plate on both top and bottom side with required number of knock out holes, neoprene gasket, etc. as per drawing, specifications & generally as per relevant IS, SLD, Technical specification & as per instructions of Engineer-in-charge.
MCB DB with Incomer of 40A, Isc=10kA, Type C, TPN MCB with 2-Pole, 25A, Isc=10kA, (100mA) RCBO for each phase and 24 nos. of 16A, Isc=10kA, Type C, SPN Ougoing MCB feeder as per SLD and technical specification.
Supply
Installation
MCB DB with Incomer of 25A, Isc=10kA, Type C, TPN MCB with 2-Pole, 25A, Isc=10kA, (100mA) RCBO for each phase and 18 nos. of 6A, Isc=10kA, Type C, SPN Ougoing MCB feeder as per SLD and technical specification.
Supply
Installation
Supply, Installation, Testing and Commissioning of following configuration 240V, 1-phase, 2 wire, with Phase indication and MCB position through glass front, Pre wired with HFFR copper wires, IP-54, MCB Distribution Board fabricated out of 2mm thick Pre Galvanized G. I sheet steel, powder coated with RAL7035 shade, suitable for surface mounting/installation in existing enclosure complete with appropriate rating of tinned copper bus bar/Cu Wire, neutral bus bar, brass neutral link, brass earthing studs, phase distribution drawing, danger board, name plate, earth bar, din bar for MCB mounting, 2 mm thick removable gland plate on both top and bottom side with required number of knock out holes, neoprene gasket, check-nuts etc. as required as per drawing, specifications & generally as per relevant IS & as per instructions of Engineer-in- charge.
MCB DB with Incomer of 40A, Isc=10kA, Type C, DP MCB and 12 nos. of 16A, Isc=10kA, Type C, SPN Ougoing MCB feeder as per SLD and technical specification.
Supply
Installation
Supply and Installation of the following Industrial/modular MCB and metal clad/polycarbonate plug sockets with suitable industrial plug tops ( 3-pin) along with surface mounted powder coated GI Box with suitable mounting arrangements on wall and 3 pin domestic plug sockets with suitable PVC Box, switch and plug tops as per Technical specifications.
1 nos. of 10A and 1 nos. of 20A, Single phase Industrial Socket with Isc=10kA, Type C-Curve, Industrial type MCB for each Socket along with pre- Galvanised powder coated GI sheet steel Face Plate, Industrial Plug Tops and suitable DIN rail and mounting arrangements along with surface mounted powder coated 2mm thick GI Box with suitable mounting arrangements on wall as per technical specification.
Supply
Installation
1 no of 6A and 1 no of 16A, Single phase Modular Decorative Type Socket with Polycarbonate box, piano Switch for each Socket and heavy duty polycarbonate Face Plate, along with concealed/surface mounted enclosure, plug tops and suitable surface mounting arrangements as per technical specification.
Supply
Installation
Supply and surface conduiting of heavy duty rigid GI ERW conduit pipe of 25mm sizes along with all accessories such as inspection bends, junction box, socket, check nut, etc. including making threads, removing burrs, connection of accessories, drawing of fish wire, cleating with heavy duty GI saddle or suit to site clamps on RCC wall, column, steel structure . as required under the instruction of Engineer in charge. 2mm thick powder coated GI surface type junction box with suitable mounting arrangements shall be provided.
Supply
Installation
Supply and laying of 14 SWG ETP grde bare solid copper conductor throughout along the conduit including fixing with ties, brazing etc as required.
Supply
Installation
Supply, Installation, Testing and Commissioning of LED light fittings with light fitting accessories, including supply of fixing SS accessories, flexible GI metallic conduit sleeves, PVC conduit bushes, Cu cable lugs, complete with light fitting accessories, including supply of fixing accessories, twin twisted tinned 1.5 sq. mm copper flexible cords for terminal connections, 16 SWG copper wire for earthing , flexible GI metallic conduit sleeves, PVC conduit bushes, cable lugs and testing and commissioning as per the specification of the following:
Decorative box type, LED 4ft Slim Batten (40mm x 46mm x 1127mm - W x H x L) with light fitting accessories, including supply of fixing SS accessories, flexible GI metallic conduit sleeves, PVC conduit bushes, Cu cable lugs,with a nominal system lumen output of >2000 lumens and a minimum system efficacy of 110 lm/W.The luminaire should have a color temperature of @ 6500K and CRI>80. THD < 10% and PF > 0.95. The luminaire housing should made of Extruded Aluminium with extruded PC diffuser & should have anodised finish. Mounting shall be suitable for ceiling suspended. The total power consumption should not exceed 18W (including driver)
Supply
Installation, testing and commissioning
Industial box type, 4ft Functional with 2x18W LED replaceble type Tube with light fitting accessories, including supply of fixing SS accessories, flexible GI metallic conduit sleeves, PVC conduit bushes, Cu cable lugs, with a nominal system lumen output of 2350 lumens per LED tube. The luminaire should have a color temperature of 6500K and CRI>80. minimum 130 lm/w efficacy, THD < 10% and PF > 0.95. The batten luminaire housing should made of white powder coated CRCA sheet steel. The LED shall be mounted on extruded aluminium strip which acts as heat sink and is intergral part of tube which is made up of polycarbonate material which gives diffused light. The total power consumption should not exceed 38W (including driver).
Supply
Installation, testing and commissioning
LED Bulkhead with a nominal system lumen output of not more than 1100 lumens and a minimum system efficacy of 110 lm/W. The luminaire should have a color temperature of 6500K and CRI > 80. The luminaire shall meet IP66 rating and IK 08 rating with THD < 20% and PF > 0.9. The luminaire housing should made of High pressure die cast Aluminium with high quality PMMA diffuser. The total power consumption should not exceed 10W (including driver).
Supply
Installation, testing and commissioning
LED higbay light fitting complete with light fitting accessories, including supply of fixing SS accessories, flexible GI metallic conduit sleeves, PVC conduit bushes, Cu cable lugs, LED High bay wide beam of 132W having System Efficacy >150 lm/W, lumen output of 19800 lumens system output THD <10%, Power Factor >0.95, CRI >80, SDCM<5, CCT 5700, Full IP 66 protected pressure die cast aluminium (LM6) housing having integrated PC lens cover with Impact resistance IK08. Operating temp. -10 degrees to 50 degrees C. BIS compliant driver, EMC -EMI compliant. Driver shall have 10KV Surge protection. Shall have eye bolt hook for surface/ suspended mounting.
Supply
Installation, testing and commissioning
Outdoor type 70 W LED periphary light suitable for wall mounting with all the accessories , IP66 surface mounted type, housing made up of pressure die cast aluminum Alloy with effective thermal management,sturdiness. The fixture should have a minimum system efficacy of 120 lumen/Watt and a minimum system lumen output not more than 13400 lumens. The fixture shall have a CRI of minimum 70. The fixture shall be designed for a system life of 50,000 hours @70% lumen maintenance. Ingress Protection of IP66 (lamp and gear Compartment) and Mechanical Impact Resistance Rating of IK >=05. The fixture driver should have an operating voltage range of 140-270 V, surge protection of >=3KV, PF >0.9 and THD<20%.
Supply
Installation, testing and commissioning
SITC of LED light fittings 150W LED based Flood light, housing made up of pressure die cast aluminum Alloy with effective thermal management, sturdiness. The fixture should have a minimum system efficacy of 130 lumen/Watt and a minimum system lumen output of 19500 lumens. The fixture shall have a CRI of minimum 80. The fixture shall be designed for a system life of 50,000 hours @70% lumen maintenance. Ingress Protection of IP66 (lamp and gear Compartment) and Mechanical Impact Resistance Rating of IK >=05. The fixture driver should have an operating voltage range of 140-270 V, surge protection of >=3KV, PF >0.9 and THD<20%.
Supply
Installation, testing and commissioning
Supply of Single Core flexible HFFR wires ( Copper ) of size mentioned below in voltage grade 1100 V as per the IS: 3961 ( part V ) - 1968. As per conductor class 2 Type-C of IS: 8130 / 1984 as per technical specification
Installation/drawing through concealled/ surface conduit and wiring, wire connection through Push wire Inline Splicing Connector for solid and stranded wires upto 2.5 sqmm, transparent housing, Transparent cover and termination at both ends of Single Core HFFR wires ( Copper ) of size mentioned below in voltage grade 1100 V as per the IS: 3961 ( part V ) - 1968. As per conductor class 2 Type-C of IS: 8130 / 1984 as per technical specification
Supply, Installation, Testing and Commissioning of ETP grade tinned Copper Earth Plate 600 mm x 600 mm x 3.15 mm thick of high grade quality including accessories, GI clamp, bolting/brazing of 2 x 95sqmm copper conductor, and providing civil masonry pit and enclosure with GI cover plate having locking arrangement and 50mm dia GI watering pipe of 2.7 metre length with 30 kg charcoal coke and 50 kg salt, excavation/piling, backfiling with black cotton soil, compacting watering, etc as required. as per IS 3043 standard as per attached technical specification.
Supply
Installation
Supply, Installation & Testing of Earthing pit with ETP grade tinned copper earth rod 25mm dia x 3mtr long including accessories,GI clamp, test link, connection of 2 x 95sqmm copper conductor, providing concrete inspection pit with cast iron cover having lifting lug and locking arrangement, 50mm dia GI watering pipe with funnel, charcoal/coke, salt, excavation/piling, backfiling with black cotton soil, compacting watering, etc as required.
Supply
Installation
Supply & Installation of Earth Test link Boxes weatherproof type ( MOC: Hot Dip Galvanised with powder coating ) as per the attached technical specification
Supply
Installation
Supply, Installation, Tesing & Commissioning of following size tinned, stranded, flexible ETP grade copper earthing conductor at 1000mm below ground level including excavation, backfilling, connection to earth pits at one end through bolting with suitable size heavy duty copper lugs and conductor tail at other end through brazing/exothermic welding, including clamping, brazing as per ASTM, connection, refilling the trench, etc as required. etc. as per instructions by Engineer-In-Charge.
95 sqmm stranded bare tinned copper conductor
Supply
Installation
Supply, Installation, Testing and surface laying of 10 sqmm tinned coper conductor ETP grade including clamping/cleating on wall, making chase, repairing the same, connection with earth pad at one end and DBs at other end clamping, brazing etc. as per instructions by Engineer-In-Charge.
Supply
Installation
Supply & Installation of Copper lug suitable for item no. 13 along with SS nut bolts of size 10mm , for terminating 10 sqmm tinned copper conductor at the earth pad/ DBs.
Supply
Installation
Supply, Installation & Testing from NABL certified lab of flexible, stranded, ETP grade tinned Cu earthing conductor and end connection with suitable size heavy duty tinned copper lugs including clamping/cleating on wall, making chase, repairing the same, supply of 95 sqmm, 75sqmm & 10sqmm copper lugs are in the scope of the vendor as required for connection to earth plate/pad, motor and other equipment, etc as per drawing.
95 sqmm stranded bare tinned copper conductor
Supply
Installation
70 sqmm stranded bare tinned copper conductor
Supply
Installation
25 x 3 mm tinned copper flat conductor
Supply
Installation
Supply and fixing of 25mm x 3mm GI strip along tray using suitable size GI saddle/clamp including interconnection, hardwares, etc as required .
Supply
Installation
10 sqmm stranded bare tinned copper conductor
Supply
Installation
Providing and fixing 300mm length cable tray equipotential bonding conductor made up of 10sqmm flexible stranded bare copper conductor having copper lugs at both ends for interconnection between cable trays.
Supply
Installation
Supply, Testing and fixing vertical air termination made up of 25mm dia, 1 mtr long solid copper rod attached to 145mm dia. Copper sphere having drilled and tapped holes for fixing 5 nos. of 390mm long spikes and square copper plate base.
Supply, Fabrication and Installation of hot dipped galvanized Standard steel sections as per IS 2062 Grade BR for cable tray supports including hot dipped galvanized GI rod for cable tray support, chequered plates for trench covers, swivel washer, base frames for panels, anchor fasters, wall frames and brackets for supporting equipment. Fabrication shall include drilling, entiling, welding wire brush cleaning, supply of all consumables like gas, welding rods, Zinc coating paint finish during installation. After fabrication two coats of epoxy based primer and two coats of finish paints shall be applied. (Hot dipped galvanising shall be carried out for all item including nut-bolts.)
Supply, Testing & Delivery at site of Power Cables as mentioned bellow, Multistranded, round wire Armoured, XLPE insulated, cores laid up with inner sheath, outer sheath FRLS (ST-2 type) , of 1.1 kV grade supplied in non returnable metallic drum as per IS 7098 ( part - 1 ) 1988.
3 x 120 Al, A2XWY
3C x 10 Cu, 2XWY
4C x 4 Cu, 2XWY
10C x 1.5 Cu, 2XWY
Installation of Power Cables as mentioned bellow, Multistranded, round wire Armoured, XLPE insulated, cores laid up with inner sheath , outer sheath FRLS (ST-2 type) , of 1.1 kV grade as per IS 7098 ( part - 1 ) 1988.
3 x 120 Al, A2XWY
4C x 10 Cu, 2XWY
4C x 4 Cu, 2XWY
10C x 1.5 Cu, 2XWY
Supply and Installation of Cu/Al Lug suitable for cable of following size multistranded, round wire Armoured, XLPE insulated power Cables as mentioned below. (Note - Unit "set" means 4 nos. of lug at one end of cable.)
3 x 120 Al, A2XWY
4C x 10 Cu, 2XWY
4C x 4 Cu, 2XWY
10C x 1.5 Cu, 2XWY
Supply and Installation of Brass Double Compression type Cable gland suitable for Multistranded, round wire Armoured, XLPE insulated for cables of following sizes.
3 x 120 Al, A2XWY
4C x 10 Cu, 2XWY
4C x 4 Cu, 2XWY
10C x 1.5 Cu, 2XWY
PA System
SITC of Junction box fabricated out of 2 mm thick hot dipped galvanised powder coated GI sheet, punched hole for conduit entry on all sides and cable of size 20 pair X 1.5sqmm with 50 nos of terminals of 4sqmm, mounting arrangement, etc as required.
Supply
Installation
SITC of Junction box fabricated out of 2 mm thick hot dipped galvanised powder coated GI sheet, punched hole for conduit entry on all sides and cable of size 10 pair X 1.5sqmm with 20 nos of terminals of 4sqmm, mounting arrangement, etc as required.
Supply
Installation
Supply, Testing and Laying of 1 Pair X 1.5sq. mm stranded, twisted pair , HFFR Type-C sheath, Overall screened Aluminium Mylar screen with drain wire 1 Sq. mm, stranded copper conductor, flexible cable in existing laid concealed or surface conduit.
Supply
Installation
EPABX System
SITC of Indoor type double enclosure (MOC: pregalvanized GI sheet steel) powder coated MDF box 20 + 20 indoor type TTB made of SWG 14 for telephone cable as per attached tech spec.
Supply
Installation
Prefabricted powder coated GI box to accomodate modular type 2 nos RJ11 socket unit suitable for concealing or surface mounting.
Supply
Installation
Front plate with 2 no's of modular type RJ11 socket unit.
Supply
Installation
Supply, Laying, casing, caping, 25x38x25mm dressing of 2 pair, 0.5mm dia., copper conductor, unarmoured telephone cable
Supply
Installation
Corded Landline Telephone: Supply of coil corded, wall/Desk mountable Electronic handset telephone set with three step ringer volume (High/Medium/Low), Redial memory, Mute, Pause, Flash Redial, Ring LED indication, plastic body with 1 year manufacturer warranty.
Fire Barrier
Water based fire stop/fire barrier with min 3 hr fire rating for cable opening and suitable for retrofitting along with fire sealant,making frames, finishing, etc as required
Supply
Installation
Fire retardent cable coating paint with min 30min fire rating for horizontal and vertical cable runs
Supply
Installation
Making the opening in brick masonary for door/window/clear story opening including dismantling in floor or walls by cutting masonary and making good the damage to walls, painting, flooring and jambs complete to match existing surface including disposal of rubbish to the naerest dumping ground.
Supply and installation of GI anchor fastener of size M12x150 mm by drilling through concrete block as per site requirement for fixing plate EP's or other structure as per tender tech spec.
Supply
Installation
Supply and installation of GI anchor fastener of size M16x150 mm by drilling through concrete block as per site requirement for fixing plate EP's or other structure as per tender tech spec.
Supply
Installation
Supply, testing & installation of ladder type cable tray of following size fabricated out of 2mm thick sheet steel having side channel of 100mm, rungs spaced at 250mm, hot dipped galvanized, single length not less than 2.5mtr with two coupling/joint plates per tray length having one long groove for adjustment and suitable for indoor as well as outdoor environment (inclusive of Horizontal bend, Tee, Cross, Reducer, Vertical bend etc.) as per technical specification.
300mm wide
Supply
Installation
Supply and installation of perforated type cable tray of following size fabricated out of 2mm sheet steel having side channel of 100mm, cross perforation not more than 17.5%, hot dipped galvanized, single length not less than 2.5mtr with two coupling/joint plates per tray length having one long groove for adjustment and suitable for indoor as well as outdoor environment (inclusive of bends, reducers etc.)
150mm wide
Supply
Installation
Power & Motor Control Centre (Group-A)
Supply, installation, testing & commissioning of type tested assembly in accordance with IS-61439 (Part-2) 415V, single front, fixed type Power & Motor Control Centre (Group-A) for Raw Water Pumps comprising of Electrolytic grade ETP Copper busbar (TPN) of 400A rating, suitable for bottom cable entry, IP 42, suitable for withstanding a symmterical short circuit fault current of 50 kA (rms) for 1 sec. and other necessary accessories as per detailed technical specifications & SLD. The panel shall comprise of following incoming & outgoing feeders: Incoming feeder: 1 No. 4P, 400A, Icu=Ics=50kA, MCCB with Extended Rotary handle and microprocessor based releases for overload, short circuit and earth fault protections along with shunt release. Outgoing feeders: i) 3 Nos. 55kW Star-Delta starter comprising of suitable rating 4P MCCB (with rotary handle) (Iq=50kA), & AC-3 duty line contactor complying Type-2 coordination. ii) 2 Nos. 37kW Star-Delta starter comprising of suitable rating 4P MCCB (with rotary handle) (Iq=50kA), & AC-3 duty line contactor complying Type-2 coordination. iii) 1 No. 2.2kW DOL starter comprising of suitable rating MPCB (with rotary handle) (Iq=50kA), & AC-3 duty line contactor complying Type-2 coordination. iv) 4 Nos. 16A adjustable thermal & fixed magnetic release based MCCB with external rotary handle. v) Lighting Transformer cubicle comprising of 1 No. 32A, 3P-N, Icu=Ics=50kA, MCCB (on the incomer of lighting transformer) with adjustable thermal and fixed magnetic releases for overload and short circuit protections respectively, along with 5 kVA VPI/ Cast resin Lighting Transformer of unity ratio suitable for top or bottom cable entry with electrolytic grade copper busbar (TPN) of rating 32A suitable for withstanding a short circuit current of 25 kA (rms) for 1 sec., 1 No. 32A, 3P-N, Icu=Ics=25kA, MCCB (on the outgoing of lighting transformer) with adjustable thermal and fixed magnetic releases for overload and short circuit protections respectively. Outgoing Distribution Board shall consist of 4 nos., 20A, 10kA, TPN MCBs.
Supply
Installation
Power & Motor Control Centre (Group-B)
Supply, installation, testing & commissioning of type tested assembly in accordance with IS-61439 (Part-2) 415V, single front, fixed type Power & Motor Control Centre (Group-B) for Raw Water Pumps & other associated loads with ETP grade Electrolytic Copper busbar (TPN) of 400A rating, suitable for top & bottom cable entry, IP 42, suitable for withstanding a symmterical short circuit fault current of 50 kA (rms) for 1 sec. and other necessary accessories as per detailed technical specifications & SLD. The panel shall comprise of following incoming & outgoing feeders: Incoming feeder: 1 No. 4P, 400A, Icu=Ics=50kA, MCCB with Extended Rotary handle and microprocessor based releases for overload, short circuit and earth fault protections along with shunt release. Outgoing feeders: i) 3 Nos. 55kW Star-Delta starter comprising of suitable rating 4P MCCB (with rotary handle) (Iq=50kA), & AC-3 duty line contactor complying Type-2 coordination. ii) 2 Nos. 37kW Star-Delta starter comprising of suitable rating 4P MCCB (with rotary handle) (Iq=50kA), & AC-3 duty line contactor complying Type-2 coordination. iii) 1 Nos. 2.2kW DOL starter with suitable rating MPCB( with rotary handle) (Iq=50kA), & AC-3 duty line contactor complying Type-2 coordination. iv) 4 Nos. 16A with adjustable thermal & fixed magnetic release based MCCB with external rotary handle.
Supply
Installation
LOCAL PUSHBUTTON SYSTEMS (LPBS) Supply and installation of indoor type LPBS by pedestal mounting using suitable channels on floor, consisting of recessed type START push button, mushroom type STOP push button, ON (Red), OFF (Green) and TRIP (Amber) cluster LED indicating lamps, analog ammeter suitable for 240V AC and other necessary accessories as per technical specifications. The supply, fabrication & installation of ISMC channel pedestal is in the scope of this item.
Supply
Installation
Supply of 3.5C x 400 Al, A2XWY Power cable: Supply, Testing & Delivery at site of Power Cables, Multistranded, round wire Armoured, XLPE insulated, cores laid up with inner sheath, outer sheath FRLS (ST-2 type) , of 1.1 kV grade supplied in non returnable metallic drum as per IS 7098 ( part - 1 ) 1988.
Installation of 3.5C x 400 Al, A2XWY Power Cables: Multistranded, round wire Armoured, XLPE insulated, cores laid up with inner sheath , outer sheath FRLS (ST-2 type) , of 1.1 kV grade as per IS 7098 ( part - 1 ) 1988.
End Terminations of 3.5 x 400 sqmm Al, A2XWY cable: The scope of work shall include Supply, Installation & Commissioning of Non-flameproof double compression Nickel Plated Brass glands & Heavy Duty Long barrel tinned Cu/Al lugs & other necessary hardware/cable support structure, cable earthing & termination of 3.5C X 400 sqmm, Al, XLPE, Armoured LT Cable.
Supply of 2C x 1.5 sqmm Cu, cable: Supply, Testing & Delivery at site of Cables, Multistranded, round wire PVC insulated, unarmoured, flexible 1.1 kV grade supplied in non returnable metallic drum.
Installation of 2C x 1.5 sqmm Cu, cable: Installation of Cables, end termination Multistranded, round wire PVC insulated, unarmoured, flexible 1.1 kV grade supplied in non returnable metallic drum.
Supply of Cable Route Markers: Supply & Installation of Cable Route Markers with Tagging arrangement as per technical specification.
Installation of Cable Route Markers: Installation of Cable Route Markers with Tagging arrangement, excavation, foundation, backfilling and compacting as per technical specification.
Soil Excavation: Excavation in all type of soils of width 500mm and a depth of 1000 mm below ground level, sand bedding, laying of baked bricks on side and top, back filling, dewatering, consolidation shoring, disposal of excess earth. Item includes Supply of river sand and class - burnt clay bricks.
Supply & Underground laying of HDPE pipe in excavated trench: 40 mm dia, 6kg/m2 HDPE pipe as per attached specifications
Optical Fibre Cable: Supply & Laying of 24 core, single mode (9.1/125 μM ), Armoured optical Fiber Cable as per attached technical specification.
Armoured telephone cable: Supply & laying of 20 pair, 0.5 mm dia copper conductor, jelly filled armoured telephone cable as per technical specification
SARASWAT ENGINEERING SERVICES
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .