Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹19.3 LAccepted-AOC | L1 | Accepted-AOC Being lowest | |
| 2 | L2₹20.3 L+₹50,190 (2.54%)Rejected-Finance | L2 | Rejected-Finance Other than lowest | |
| 3 | L3₹20.7 L+₹87,350 (4.41%)Rejected-Finance | L3 | Rejected-Finance Other than lowest | |
| 4 | L4₹20.9 L+₹1.1 L (5.80%)Rejected-Finance | L4 | Rejected-Finance Other than lowest | |
| 5 | L5₹23.0 L+₹3.2 L (16.1%)Rejected-Finance | L5 | Rejected-Finance Other than lowest |
Tender Value
₹25 L
EMD Value
₹50,000
Closing Date
12 Sept 2024, 9:00 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Maj Dinoop Kumar
GE (W) Agra
PERIODICAL SERVICES AND MISC REPAIR TO E/M INSTALLATION UNDER GE (W) AGRA
2024_MES_665973_1
8012/1039/E8
Open Tender
Civil Works
Item Rate
270 days
GE (West) Agra
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
Yes
GE (West) Agra
₹50,000
18 Nov 2024
15 Jul 2024
14 Sept 2024
15 Jul 2024
12 Sept 2024
29 Jul 2024
Amount
Demolition of stone/brick masonry built in cement mortar incl all quions,Arches, pillers etc complete all as specified and directed by Engr-in-Charge.
M&L for brick work with using sub class 'B' brick ,straight or curved on plan exc. 6 meter radius, built in CM (1:6) for wall complete all as specified and directed by Engr-in-Charge.
All as per item 2 above but except brick complete all as specified and directed by Engr-in-Charge.
M&L for brick work with using sub class 'B' brick ,straight or curved on plan exc. 6 meter radius, built in CM (1:4) for wall complete all as specified and directed by Engr-in-Charge.
Taking down cement plaster of any description on brick or stone walls or from concrete surface incl racking out joints hacking for key scrubbing with water etc complete all as specified and directed by Engr-in-Charge..
M&L for rendering 10 mm thick with CM 1:6 on fair faces of brick work, finishing fair and even without using extra cement complete all as specified and directed by Engr-in-Charge.
M&L for rendering 15 mm thick with CM 1:4 on other than fair faces of brick work, finishing fair and even without using extra cement complete all as specified and directed by Engr-in-Charge.
M&L for rendering 10 mm thick with CM 1:4 on fair faces of brick work, with water proofing compound finishing fair and even without using extra cement complete all as specified and directed by Engr-in-Charge.. Note:- WPC paid separately.
Supply only integral water proofing compound (Liquid) complete all as specified and directed by Engr-in-Charge.
M& L washed stone grit plaster on exterior walls in two layers under layer 12 mm cement plaster 1: 4 ( 1 cement : 4 coarse sand ) furrowing the under layer with scratching tool applying cement slurry on the under layer @ 3 Kg of cement per square metre top layer 15 mm cement plaster 1:1 / 2 : 2 (01 cement 1/2 corse sand : 2 stone chipping 10 mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing the top layer with brushes and water to expose the stone chippings complete all as spd (payment for providing grooves shall be made separately) complete all as specified and directed by Engr-in-Charge.
M&L in forming groove of uniform size 15 mm wide and 15 mm deep in the top layer of washed stone grit plaster as per approved attern using wooden battens naied to the under layer including removal of wooden battens repair to the edgs of panels and finishing the groove complete as per specifications and direction of the Engineer - in - charge
M&L for Preparation of newly plastered any surfaces (wall, column, ceiling etc) and appling two coat of cement base paint over a coat of primer complete all as specified and directed by Engr-in-Charge.
M&L for Preparation of newly plastered any ( wall , column, ceiling etc) surfaces and appling two coat of oil bound distempert over a coat of primer complete all as per specified and directed by engr -in- charge.
M&L for complete removal of existing treatment of old decorative plastered/ unplastered wall, column,facia, chajja etc up to any height and including applying two coat of oil emulsion distemper over a coat of primer complete all as specified and directed
M & L for two coat of cement base paint on old decorative plastered/ unplastered surface up to 25 mtr height for bldg, OHT, UG Sump etc incl after preparation complete all as specified and directed by Engr-in-Charge.
M & L for applying two coat of synthetic enamel paint on old painted wooden surfaces of any description complete all as specified including preparation and complete removal of existing treatment complete all as specified and directed by Engr-in-Charge.
M & L for applying two coat of synthetic enamel paint on old painted steel surfaces of any description complete all as specified including preparation and complete removal of existing treatment complete all as specified and directed by Engr-in-Charge.
M & L for writing letters or figures (Block. Roman. Italic or Indian) on buildings n.exc 30cm high with SE paint, complete all as specified and directed by Engr-in-Charge.
Re-securing or easing and adjusting without taking down shutters of any description exc. 1.0 sqm but n exc 2.0 sqm each complete all as specified and directed by Engr-in-Charge.
Demolition of reinforced cement concrete cover slab, (reinforcement cut as required to facilitate demolition) (below or above ground level) complete all as specified and directed by Engr-in-Charge.
M&L Providing precast cover slab 1:2:4 type B 1 using 20 mm graded aggregate set in cement mortar 1:6 as in cover slab including placing in position complete all as specified and directed by Engr-in-Charge. ( Note : - reinforcement shall be measure and paid separtely under respective item of sch A).
M&L for mild steel TMT bars of 10mm dia and over, dia cut to length bent to shape required including cranking bending spirally for hoopinf for column, hooking ends and binding with mild steel wire not less than 0.9 mm dia(annealed) or securing with cips complete all as specified and directed by Engr-in-Charge. (Note - The payment shall be made only after placing of cover on manholes.
Dismantling fencing wire mesh any type complete all as specified and directed by Engr-in-Charge.
S&F in repair MS galvanished chain link fencing (Weight Not exc 4 Kg per Sqm / as approved by GE ), rail straining bolts, tec incl provission of binding wire,of any description complete all as specified and directed by Engr-in-Charge.
Dismantling mild steel work of any description complete all as specified and directed by Engr-in-Charge.
S& F joist channel, MS pipe, angel,flat,door frame or tee section as in post and strut in fencing including drilling holes notching for wire etc, flat iron fillet (for securing wire mesh/chanelling fencing) incl all necessary drilling riveting ,bolts etc. similar work conforming to Fe 290 Gde E-165 complete all as specified and directed by Engr-in-Charge..
M & L for praparation of newly steel surface over 10 cm width or girth and applying two coat of synthetic enamel paint over one coat of redoxide primer complete all as specified and directed by Engr-in-Charge.
Excavation in post holes each n.exc 0.5cum getting out in any type of soil returning filling in and ramming earth or broken rubble mixed in layers n.exc 25 cm and covering and removal of surplus soil n.exc 50 m and making good surface complete all as specified and directed.
S &F in repair galvanised 2 strand 2.24 mm dia steel barbed wire, barbed with 2mm dia barbs at 75mm (approx) spacing and straining and fixing to any type of post straining bolts, including securring or typing at crossing with and including complete all as specified and directed by Engr-in-Charge.
S&F in repair for 0.80 mm thick mild steel, plain, black sheet as in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and directed by Engr-in-Charge.
Dismantling of stone slab and tiles of any description or thickness in floor ,apron and laid dry or laid dry and pointed complete all as specified and directed by Engr-in-Charge.
M&L Machine cut kota stone with white marble strip 20 mm thick as in floor, skirting laid and jointed with grey cement slurry with 3.0 kg of cement per sqm ,mixed with pigment to match the shade of the stone including grinding and polishing over 20mm thick screed bed in CM (1:4) as in floor complete all as specified and directed by Engr-in-Charge.
M&L, for broken stone hardcore of gauge n.exc 63 mm deposited, spread, and levelled in layers n.exc 15 cm thick watered and rammed to a true surface for levelling and slope maintaning complete all as specified and directed by Engr-in-Charge.
M&L PCC 75 mm thick (1:4:8) type D-2 (using 40 mm graded aggregate) as in sub base, sub floor,and paving complete all as specified and directed by Engr-in-Charge.
M&L for machine pressed chequred cement concrete coloured tiles 30cm x 30cm x 25 mm thick, set , jointed and pointed in neat cement slurry with mixer of white cement and pigmenet as in floors/pavements/ paths laid over inluding 20 mm thick screed bed or bedding layer in cement mortar 1:6, complete all as specified and directed by Engr-in-Charge.
Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed by Engr-in-Charge.
Demolition Cement concrete (unreinforced) in ground floors and pavings n exe 15 cm thickness (below or above ground level) complete all as specified and directed by Engr-in-Charge.
M&L providing cement concrete (1:2:4) type B-1 using 20 mm graded aggregate, plinth protection / sub base , floor, lintels upto 1.5 mtr long,cills,steps, and other similar band, plinth course, string course, lacing course, parapets and railing upto 60cm in height, coping, apex stones, bed plate, water troughs and like including weathring, slightly rounded or chamfered angles and troughting etc complete all as specified and directed by Engr-in-Charge.
Mahendra Enterprises (BID ID -3084791)
M/s Sharda Costruction Company (BID ID -3091692)
M/S DEVENDRA KUMAR GUPTA (BID ID -3091762)
M/S RADHEY GOVIND ENTERPRISES (BID ID -3093557)
M/s S. K. Construction Co. (BID ID -3093401)
PD GUPTA AND COMPANY (BID ID -3077621)
M/S MAKHIJA TRADERS (BID ID -3084094)
M/s Kok Singh Sisodia (BID ID -3091944)
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .