Repairs to joinery, sanitary fittings, plastering, sunken floor, internal water supply and other allied works of DMR area under AGE B/R-I at GE(N) Ahmednagar

Amount

Dismantling of stone slabs and tiles of any description or thickness in floors, approns etc laid and bedded in any mortor, wall tiling etc complete all as specified and directed by Engineer-in-Charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises etc complete all as specified and directed by Engineer-in-Charge.

Demolition of plain cement concrete (unreinforced) in ground floor not exceeding 15 cm thick etc complete all as specified and directed by Engineer-in-Charge.

Taking down chowkats or frames nexc 1.5 Sq m with shutters (without taking off shutters from the frames) all as directed.

Taking down shutter exceeding 1.00 Sqm but not exc 2 Sqm etc complete all as specified and directed by Engineer-in-Charge.

Dismantling of flase ceiling etc complete all as specified and directed by Engineer-in-Charge.

Demolition of plain cement concrete solid block masonary built in cement mortar etc complete all as specified and directed by Engineer-in-Charge.

Dismantling of asbestos cement (corrugated semi corrugated) sheets in roof covering etc complete all as specified and directed by Engineer-in-Charge.

Taking down cement plaster on brick / stone walls including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed by Engineer-in-Charge.

Taking down steel tubing and connections,15 mm bore etc complete all as specified and directed by Engineer-in-Charge.

All as per item No. 10 (here-in-before) but 20mm bore

M&L for 75 mm thick plain cement concrete (1:4:8) type D2, using 40 mm graded stone aggregate as in sub base all as directed.

Material and labour for special treatment to sunken slab floor incl WC trap etc including cleaning and preparing the surface area for carrying out membrane water proofing treatment and applying 10mm thick cement plaster in CM 1:4. Then providing and laying Mineral Top APP (Atactic Polypropylene Polymer) modified prefabricated 5 layer 4mm thick water proofing membrane, black finished rainforce with non woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 Litre per Sqm by the same membrane manufacturer of density at 25ºC, 0.87-0.89 Kg per litre and viscosity 70-160 cps. Over the primer coat the layer of membrane shall be laid using Butane Torach and sealing all joints etc and preparing the surface complete. and providing PCC 1:5:10 type E2 using 40mm graded mechanically crushed stone aggregates in sunken slab and 75mm thick PCC 1:4:8 type D2 using 40mm graded mechanically crushed stone aggregates as base, 40mm bore GI pipe, light grade of length not less that 50 cm as spout, area of WC exc 1.50 Sqm but nexc 5.00 Sqm etc after dismantling the existing sunken floor etc complete all as specified and directed by Engineer-in-Charge.

Material and labour for pre-cast cement concrete block masonry with solid blocks, type C1 in (1:3:6) (20 mm graded aggregate) exc. 10 cm in width and setting built in cement and sand mortar (1:6) etc complete all as specified and directed by Engineer-in-Charge.

Supply and fix in repairs to false ceiling with 4 mm thick plain non asbestos building 'E' board with decorative finish water proofed on one side fixed on and including powder coated GI fabricated grid of 60 cm X 60 cm made out of main runner of 'T' section of size 32 mm X 24 mm X 0.30 mm, cross runner made out of 'T' of section of size 24 mm X 24 mm X 0.30 mm and alround angular section of size 22 mm X 22 mm X 0.70 mm suspended by 4 mm dia GI wire fixed to roof at 600 mm centre to centre as per manufacturere's instructions and etc complete all as specified and directed by Engineer-in-Charge.

Supply and fix in repair pressed steel frames of size 105 mm X 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc incl filling in door frames in plain cement concrete, 1:2:4 type B0, using 12.5 mm graded stone agreegates etc complete all as specified and directed by Engineer-in-Charge.

Supply and fix 35 mm thick factory made plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial plywood. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated etc complete all as specified and directed by Engineer-in-Charge.

Supply and fix 35 mm thick factory made glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) etc complete all as specified and directed by Engineer-in-Charge.

Supply and fix solid PVC door frame of size 50 mm X 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube etc complete all as specified and directed by Engineer-in-Charge.

Supply and fixing Factory Made Solid PVC Moulded Door Shutter, with wood free EPS, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm thick 3D wood grain Moulded PVC Sheet Polyurethane painted on the front face & 2mm Plain colour PVC Sheet on back face, the shutter shall be fixed with and including stainless steel hinges 100mm size etc complete all as specified and directed by Engineer-in-Charge.

S&F steel windows double shutter with side hung shutters incl box/projecting type hinges with steel handles and steel peg stay complete with guard bar and glazing bars dovetailed or welded etc complete all as specified and directed by Engineer-in-Charge.

S&F mild steel barrel tower bolt 200mm long , stove enamelled black, with bright bolt etc complete all as specified and directed by Engineer-in-Charge.

S&F mild steel sliding door bolts 300mm long , plate type stove enamelled black with bright bolts not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate etc complete all as specified and directed by Engineer-in-Charge.

Supply and fix in repair 200mm long aluminium alloy, anodised, sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section of cast aluminium alloy etc complete all as specified and directed by Engineer-in-Charge.

S&F for mild steel pressed handles 150mm long , oval type , stove enamelled black etc complete all as specified and directed by Engineer-in-Charge.

S&F in repair MS 300mm ordinary rat tail rod pattern springs including roller and roller plate etc complete all as specified and directed by Engineer-in-Charge.

Supply and fix mild steel butt hinges medium weight cold rolled of size 100mm long etc complete all as specified and directed by Engineer-in-Charge.

Supply and fix aluminium anodised barrel tower bolt of extruded section 200mm long etc complete all as specified and directed by Engineer-in-Charge.

Supply and fix aluminium anodised handles of extruded section 150mm long etc complete all as specified and directed by Engineer-in-Charge.

M & L for block boards, grade 1 quality, exterior grade, decorative type with decorative face veneer on one face fixed with screws to timber frame-work etc complete all as specified and directed by Engineer-in-Charge.

Hacking out old broken glass (any thickness size,quality or description) from wooden frames or stone, concrete or brick surrounds glazed with putty or fixed with beads etc complete all as specified and directed by Engineer-in-Charge.

Material and labour for 3mm thich figured glass pin headed type glazing with oil putty, bead in squares n.exc 0.50 Sqm Each etc complete all as specified and directed by Engineer-in-Charge.

Material and labour for glazing with 3 mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.50 Sqm in Each pane etc complete all as specified and directed by Engineer-in-Charge.

Supply and fix in repair wire cloth 0.36 nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples etc complete all as specified and directed by Engineer-in-Charge.

Supply and fix galvanised mild steel wire cloth 0.56 nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples etc complete all as specified and directed by Engineer-in-Charge.

Supply and fix asbestos cement corrugated or semi currugated sheets, 6 mm thick in roofs, walls fixed with 'L' type or 'J' type or cranked hook bolts etc complete all as specified and directed by Engineer-in-Charge.

All as per item No 36 (here-in-before) but except sheet

S&F asbestos cement pain angular ridge 6 mm thick fixed with L type or J type or cranked hook bolts etc complete all as specified and directed by Engineer-in-Charge.

Material and labour for rough dressed shahabad stone, 25 mm to 40 mm thick laid over and including 15 mm thick screed bed in cement and sand mortar (1:6), laid and jointed pointed in cement and sand mortar (1:3) etc complete all as specified and directed by Engineer-in-Charge.

All as per item No 39 (here-in-before) but except shahabad stone.

Material and labour for coloured glazed ceramic tiles of size exc 0.06 Sqm and n'exc 0.18 Sqm , 8-10 mm thick as as in dado/skirting or on vertical surfaces, over and including 10 mm thick backing coat in cement and sand mortar (1:4) set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles etc complete all as specified and directed by Engineer-in-Charge.

Material and labour for 60mm thick, PCC pavers interlocking tiles glossy finish, any shape & size conforming to IS 15658 of 2006. M-35 grade made up with 12.5mm graded mechanically crushed stone aggregates, factory made over and incl 15mm thick sand cushioning and joints filled with fine sand incl levelling & sweeping etc complete all as specified and directed by Engineer-in-Charge.

M&L for joint free non skid ceramic coloured tiles 7 to 8 mm thick, area of tile exc 0.18 Sqm but not exc 0.38 Sqm as in floor laid over and including 15 mm thick screed bedding in cement and sand mortar (1:6), set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiless etc complete all as specified and directed by Engineer-in-Charge.

All as per item No. 43 (here-in-before) but in skirting over and including screed 10mm thick in cement and sand mortar (1:4)

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square/ rectengular) area of Each tile exc 0.06 Sqm but not exc 0.11 Sqm as in floor over and including 15 mm thick screed bedding in cement and sand mortar (1:6), set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles etc complete all as specified and directed by Engineer-in-Charge.

Material and labour 16-18mm thick pre-polished granite stone slab of approved shade and colour Jet Black / Telephone Black as in top table, top of WHB, kitchen slab/platform, steps, gate pillars, cills etc or on vertical surfaces including vertical projection, full round moulding the edge laid over screed bed 15mm thick in cement and sand mortar (1:4) jointing , pointing in white cement 1:2 using marble dust with admixture of pigment to match the shade of granite and rubbing polish to achieve mirror finish etc complete all as specified and directed by Engineer-in-Charge.

M&L for machine cut kota stone slab flooring 20-25mm thick over 15mm thick cement screed bedding in cement and sand mortar (1:6) laid and jointed in neat cement slurry & pointed with pigment to match shade of incl rubbing and mirror polishing etc complete all as specified and directed by Engineer-in-Charge.

All as per item No. 47 (here-in-before) but on skirting over backing coat of 10 mm thick cement and sand mortar (1:4)

Material and labour for rendering, 10 mm thick on ceiling surfaces in cement and sand mortar (1:4) surfaces finished even and smooth without using extra cement etc complete all as specified and directed by Engineer-in-Charge.

M&L rendering 10mm thick in cement and sand mortar (1:6) on brick or concrete surface/ stone surfaces finishing even and smooth with thin layer of sagol finish etc complete all as specified and directed by Engineer-in-Charge.

M&L for rendering to 15 mm thick in cement and sand mortar (1:4) on brick/concrete/stone surfaces etc complete all as specified and directed by Engineer-in-Charge.

Dismantling of water tanks from any position/location, of any make etc,of capacity exc 500 Ltr & n.exc 1000Ltr with ball valve etc complete all as specified and directed by Engineer-in-Charge.

Supply and fix tubular towel rail, brass chromium plated 20 mm dia `D' type, 60 cm long between flanges including a pair of brackets etc complete all as specified and directed by Engineer-in-Charge.

Supply and fix in repairs vitreous China white squatting pan, Orissa pattern of size 580 X 440 mm width with integral foot rest set in cement concrete including flush pipe and connecting to trap / flushing cistren etc complete all as specified and directed by Engineer-in-Charge.Make :- Cat Part No C0117 Of Parryware or Cat Part No 20042 Of Hindware or equivalent makes mentioned in list of makes in Appendix `C'

Supply and fix in repairs wash hand basin vitreous China, flat back of size 450 X 300 mm including a pair of brackets, PTMT waste coupling, 32 mm dia PVC flexible waste pipe and connecting to stop valve and nahani trap etc complete all as specified and directed by Engineer-in-Charge Make : Cat Part No 10004 of Hindware or Cat Part No C0475 of Parryware or equivalent makes mentioned in list of makes in Appendix `C'

supply and fix mild Steel 32 mm dia decorative CP curtain rods with fixing brackets fixed in repairs etc complete all as specified and directed by Engineer-in-Charge

Supply and fix in repair bib tap, 15 mm dia, CP cast copper alloy with crutch or butterfly handle screwed down for iron pipe or for brass ferrule etc complete all as specified and directed by Engineer-in-Charge Make:- Cat part No MOR 1020 A(Orintal series) of MARC or equivalent or equivalent makes mentioned in list of makes in Appendix `C'

Supply and fixing in repairs stop valve cast copper alloy, fancy type screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union and fix of size 15 mm bore etc complete all as specified and directed by Engineer-in-Charge Make:- Cat part No MOR 1320 (Orintal series) of MARC or equivalent ior equivalent makes mentioned in list of makes in Appendix `C'

Supply and fix in repair 15 mm dia pillar tap, cast copper alloy, with capstan heads, chromium plated, fancy type, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe etc complete all as specified and directed by Engineer-in-Charge Make:- Cat part No MOR 1010 (Orintal series) of MARC or equivalent or equivalent makes mentioned in list of makes in Appendix `C'

Supply and fix in repairs, shower rose with shower arm of Make:- Cat part No MARC MSR1050 (Shower) and MOR 1260(Shower arm) of MARC or equivalentor equivalent makes mentioned in list of makes in Appendix `C' etc complete all as specified and directed by Engineer-in-Charge

Supply and fix rotational moulded polyethylene water storage tanks double layer ISI marked conforming to IS 12701-1996 (cylindrical vertical with closed top) and made out of virgin FDA approved polyethylene material of 500 litres capacity hoisted and fixed in position including 20 mm dia ball valve, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed to iron pipe and connecting etc complete all as specified and directed by Engineer-in-Charge

All as per Sl item No 61 (here-in-before) but 1000 ltrs.

All as per Sl item No 61 (here-in-before) but 2000 ltrs.

S&F in repair gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe and fixed of 20mm bore fixed etc complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repairs vitreous china wash down water closet (Pedestal pattern) white including fixing bolts with and including plastic water closet seat cover closed pattern with flat bottom and cover and MSCP almn hinges device complete connecting to 'P' or 'S' trap etc complete all as specified and directed by Engineer-in-Charge. Make:-Petite series Cat part No C0287(S)/88(P) Incl seat cover Cat part No E8309 of Parryware or equivalent makes mentioned in list of makes in Appendix `C'

Supply & Fix in repair health faucet with 8 mm dia 1 mtr long flexible tube wall mounted/hooked all as per cat Part No 573 of Jaquar or its equivalent or equivalent makes mentioned in list of makes in Appendix `C' etc complete all as specified and directed by Engineer-in-Charge

Supply and fixing in repairs stop valve cast copper alloy, fancy type screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union and fix of size 15 mm bore etc complete all as specified and directed by Engineer-in-Charge Make:- Cat part No MOR 1320 (Orintal series) of MARC or equivalent ior equivalent makes mentioned in list of makes in Appendix `C'

Supply and fixing in repairs 15 mm bore galvanised steel tubing medium grade laid in trenches or fixed to walls / ceiling etc complete all as specified and directed by Engineer-in-Charge.

All as per ser item No 68 (here-in-before) but 20mm bore.

Supply and fix in repairs PVC connections 15 mm size with PTMT nuts of length 450 mm etc complete all as specified and directed by Engineer-in-Charge.

S & F in repairs looking mirror of size 600 mm x 450 mm etc complete all as specified and directed by Engineer-in-Charge. Make :- Cat Part No C 8610 of Parryware or euivalent or equivalent makes mentioned in list of makes in Appendix `C'

Supply and fix in repairs 75mm dia PVC SWR pipe, single socketed in any length with rubber ring joints fixed with stack clamps FI 50mm by 5mm flat iron clamps to walls incl bolt & nuts etc complete all as specified and directed by Engineer-in-Charge.

All as per item No 72 (here-in-before) but 110 mm dia

Supply and fix in repairs PVC (SWR) bends any radius, for 75mm bore of pipe with access door etc complete all as specified and directed by Engineer-in-Charge.

All as per item No 74 (here-in-before) but 110 mm dia

S&F 110 mm bore PVC (SWR) branch piece double (single/double Y) equal or unequal etc complete all as specified and directed by Engineer-in-Charge.

S&F 75mm bore PVC (SWR) branch piece double (single/double Y) equal or unequal etc complete all as specified and directed by Engineer-in-Charge.

M&L for screed bed or bedding layer of mortar 10mm thick in CM 1:3 by using 100% course sand on roof/chajja mixed with & including M&L for WPC @ 3% by weight of cement and finished the surfaces even and smooth without using extra cement to receive water proofing treatment including taking down existing screed bed / plaster etc complete all as specified and directed by Engineer-in-Charge.

M&L for providing waterproofing treatment on roof / chajja / parapet etc. as per latest zonal specification, as per manufacturer's instructions and as specified after taking down / out as existing as site:- (a) M&L for cleaning the newly plastered surface with wire brushes and applying two coats of bituminous primer @ 0.25ltrs/sqm and allow to dry. (b) M&L for applying and laying torch APP polymer modified bituminous membrane 3mm thick with non woven polyster matt as reinforced weighing not less 3 kg / Sqm with white gravel / mineral finished by thermofusion process.

M&L for Preparing unplastered or plastered surfaces and applying two coats of oil bound distemper including chalk whitening on wall including smooth roller finish etc complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of old / new surfaces of walls & applying two coats of acrylic (antifungal) exterior grade paint on wall & etc complete all as specified and directed by Engineer-in-Charge.

M&L for applying one coats of synthetic enamel paint on old steel surfaces of any description exc 10 cm width or girth including preparation of surfaces and smooth finish etc complete all as specified and directed by Engineer-in-Charge.

Material and labour for applying two coats of synthetic enamel paint over a coat of red oxide primer for newly / untreated steel surfaces of any description exc 10 cm width or girth including preparation of surfaces etc complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of newly / old plastered surface and applying 2 coats of white wash on wall etc complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of new / old plastered surface and applying 2 coats of white wash on ceiling etc complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of old wooden surface and applying one coat of synthetic enamel paint over etc complete all as specified and directed by Engineer-in-Charge.

M&L for cleaning of service tank up to 2000 ltrs by removing all scales, dirt, silt, mud etc from tank and mouth of outgoing pipe including washing of tank internally with bleaching powder after removing scale, dirt, silt, mud etc from tank and removing algea from outside of tank from below bottom of tank and disinfecting tank by spraying sodium hypo chloride solution in tank and writing date of cleaning on tank with synthetic enamel paint size of alphabet / unmerical shall be minimum 7cm etc complete all as specified and directed by Engineer-in-Charge.

Supply and fix in repair nahani trap with 100 mm dia grating incl 75mm dia PVC bend to fixing with drain pipe and floor tiles on broken area n.exc 1.00 sqm area in kitchen or bathroom etc complete all as specified and directed by Engineer-in-Charge.

S&F in repair wall mixture, with provn for overhead shower etc complete all as specified and directed by Engineer-in-Charge Make : Cat Part No MSH1141 of Marc or equivalent or equivalent makes mentioned in list of makes in Appendix `C'

Taking down aluminium doors / windows shutters only and dismantling all members and reassembling the same with and including new screws, new rubber gasket, new aluminium cleats of existing make and also refixng the locks & roller in existing postiion with and includig new screws including refixing the window shutters in same opening etc complete all as specified and directed by Engineer-in-Charge. Note : If broken or unserviceable glass/aluminium wire mesh/floor spring/concealed lock is replaced same will be paid separately under relevant items.

S&F in repairs concealed star lock powder coated for aluminium door/window fixed as per manufacturers instructions etc complete all as specified and directed by Engineer-in-Charge.

S & F in repairs door closer hydraulically regulated, designation No.1 universal type, suitable for door shutters up to 700 mm in width and of weight not more than 35 kg and fixed etc complete all as specified and directed by Engineer-in-Charge.

S&F powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed by Engineer-in-Charge.

S&F powder coated anodised aluminium fully glazed door shutters side hung type / sliding type with top channel and roller and accessary, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc complete all as specified and directed by Engineer-in-Charge (Note : Glass will measured and paid separately)

S&F powder coated anodised aluminium glazed window shutter side hung / sliding type, without sash bars, aluminium sections weighing 0.55 kg/m aluminium open track section having reqd size of style and top rails, bottom rails including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) etc complete all as specified and directed by Engineer-in-Charge (Note : Glass will measured and paid separately)

S&F powder coated anodised aluminium glazed / gauzed window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc complete all as specified and directed by Engineer-in-Charge (Note : Glass / wire mess will measured and paid separately)

M&L 4.00mm thick sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 Sq. m in each pane with solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers etc complete all as specified and directed by Engineer-in-Charge.

M&L 4.00mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 Sq. m in each pane with solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers etc complete all as specified and directed by Engineer-in-Charge.

M&L plain fillets, square, rectangular or triangular in section, wrought, secured with nails or brads, sectional area exc 3 & n.exc 6 Sq.cm of 2nd class hard wood all as specified etc complete all as specified and directed by Engineer-in-Charge.

M&L plain fillets, square, rectangular or triangular in section, wrought, secured with nails or brads, sectional area exc 6 & n.exc 13 Sq.cm of 2nd class hard wood etc complete all as specified and directed by Engineer-in-Charge.

S&F corner glass shelf with bracket. etc complete all as specified and directed by Engineer-in-Charge Make Jaquare Cat No CAN-1173 in Marc / Plumber / ESS-ESS

An amount of Rs 46,755.00 shall be deducted from BOQ on account of schedule of credit

OM SAI ASSOCIATES

Priyadeep Construction

M/S-B.R.SONAWANE

M/s Meher Construction

M/S. Z.K.ENTERPRISES, AHMEDNAGAR

Neha Enterprises

MUDRIK ENTERPRISES

M/S. M. F. Sharif & Co.

M/s IBEX Engineers and Contractors

G.M. Construction

Takshashila electricals

M/s. N D Karande