REPAIR/REPLACEMENT TO UNSV CHLORINE DOSING PUMP SET/CHLORINE PLANT, WATER LEVEL INDICATOR, LT PANEL AND OTHER CONNECTED WORKS OF WATER SUPPLY SYSTEM AT WEST OF MG ROAD UNDER GE E/M LUCKNOW

Amount

Taking down chlorine metering pump 1/2 HP 240 Volt, 50 Hz and transporting from pump house to contractor's work shop or at site, dismantling for carrying out necessary repairs / renewal of parts of motors or pump as per existing make and model and reassembling complete chlorine metering pump sets & installation ,testing etc the same after necessary repair to site complete all as specified and directed. Note:- (i) New spares/parts shall be measured & paid separately under appropriate items listed here-in-after. (ii) Quoted rate shall be deemed included of transporting, repair, overhauling and replacement of spares complete.

Supply and replacing (in repairs) pump shaft for metering pump complete all as specified and directed.

Supply and replacing (in repairs) spring for metering pump complete all as specified and directed.

Supply and replacing (in repairs) diaphragm for metering pump complete all as specified and directed.

Supply and replacing (in repairs) dozing head for metering pump complete all as specified and directed.

Supply and replacing (in repairs) tubing suction / delivery pipe 3/8 " dia nylon pvc 03 mm thick for metering pump complete all as specified and directed.

Cutting out the existing winding metering pump electric motor of any make single phase, 240 Volts, AC of any make, rewinding with the same size of coper winding wire as exisiting complete all as specified and directed.

Supply and replacing (in repairs) of nylon braided PVC pipe 20 mm bore complete all as specified and directed.

Supply and replacing (in repairs) chlorine testing kit stand type complete all as specified and directed.

Supply and replacing (in repairs) brass nipple complete all as specified and directed.

Supply and replacing anti siphon valve of metering pump and make the serviceable complete all as specified and directed.

Supply and replacing (in repairs) connecting nut 3/8" with adopter for dosing pump complete all as specified and directed.

Supply and replacing (in repairs) rotor assembly with bearing brackets and tolerance rings complete all as specified and directed.

Supply and replacing (in repairs) pump head ( ferrule 1/4" and duckbill included) complete all as specified and directed.

Supply and replacing (in repairs) roller assembly complete all as specified and directed.

Supply and replacing (in repairs) Pump tube (roller type) complete all as specified and directed.

Supply and replacing (in repairs) injection check valve 3/8" complete all as specified and directed.

Supply and replacing (in repairs) weighted suction line strainer 3/8" complete all as specified and directed.

Supply and replacing transformer oil di-electric strength not less than 60 KV/MM from oil immersed starter of any rating situated in any pump house located in Cantt duly heated upto the required tempereture complete all as specified and directed.

DOL starter for single phase motor, 220 V upto 3 HP Motor as in replacement , complete all as specified and directed.

DOL starter for three phase motor, 220 V 5 HP Motor as in replacement , complete all as specified and directed.

Supply only broom coconut complete all as specified and directed.

Supply of liquid chlorine sodium hypochlorites (Grade-I) drinking water with 9% chlorine contents by volume conforming to IS-11673 in sealed non-chemical re-actined / oxidation LDPE containers of 60 Kg PVC tanks, as required on monthly basis with manufacturer's chlorine test certificate and manufacturer's date marked not more than 02 week ago complete all as specified and directed.

Supply only high strength calcium based granular containing appropriate quantities of chlorination dipensates / corrosion inhibitors to prevent encrustation / scaling in distribution system in 45 / 50 Kg packing of having chlorine contents 65% to 70% by volume approved and tested from Govt lab or equivalent testing agency (not more than 02 months old packing) complete all as specified and directed.

Supply only bleaching powder the chlorine intent form 30-35% chlorine powder or chromate lime, used for water treatment complete all as specified and directed.

Supply only O-tolodine chlorine solution in packing of 500 ml bottles for testing of chlorine contents in water, complete all as specified and directed.

Supply only rubber / PVC hand gloves to handle chlorine / liquid complete complete all as specified and directed.

Supply only P.V.C flexible non toxic hoses( off white) of 40mm outer dia, in standard length of 30 M roll complete all as specified and directed.

S&F in repacement GEARMOTOR assembly complete 230 Volt 50 Hz, complete all as specified and directed.

S&F in replacement Pump head (ferrules 1/4" & DUCKBILL) assembly complete all as specified and directed.

S&F in replacement single head feed rate control with shaft assembly complete all as specified and directed.

Daily Maintenance of Dosing pumps / Chloronome Plants and/or Bleaching powder Dozer /metering pumps of any make and model in 58 Nos Pump houses at various locations in Lucknow Cantt area including cleaning overhauling and repairs to defective chlorinator after renewal of defective spares / components of any approved Make - viz AVON / AQUAS / PEARL / MAIC/TOSCON JESCO / Declibac etc. complete all as specified & directed. [Note :(i) Each plant / bleaching powder dozer shall be cleaned /maintained daily under supervision of EIC (ii) Fixing of defective spares / Components are deemed to be included in the unit rate but cost of spares / components will be paid under respective items here-in-after (iii) Daily maintenance register shall be maintained for each pump house and shall be signed by representative of contractor and the Engineer in-Charge after doing necessary maintenance) (iv) He will perform the duty in entire cantt area

Supply and fixing in replacement of the water level indicator of OHT 25 head and 90 mtr apart from the tubewell complete kit in all manners as Approved by E-in-C's Br, AHQ including taking down of old unserviceable spares: IE Co, or equivalent of Servel/ Surya Electronics & Control complete all as specified and directed.

S&F cable joint kit suitable for 0.5 Sq mm 10 pairs of copper wire cable of water level indicator complete all as specified and directed.

Supplying, laying or fixing, jointing and testing solid PVC insulated, 10 pairs, individual shielded for interference rejection, armoured PVC sheathed 1100 Volts garde 0.5 sqmm instruemental cable ISI-5608 marked ,complete all as specified laid in trenches/ laid under floor or fixed naked with walls / on poles/ in ducts /in GI pipes etc. including taking out unserviceable cable complete all as specified and directed. Note :- Excavation, earth work, sand cushioning, protection bricks/ tiles/ block,Clamps, nuts , bolts, washers and pipe shall be measured and paid separately under appropriate items.

Repair/maint and overhauling of L.T.Panel 3 phase AC 415V, 50 Hz A of any make including Taking out old /UNSV MCCBs & MCBs /incoming and outgoing laminated copper busbar , DMC/epoxy insulators of any size ,Volt meter, Amp. meter,phase indicator LED lamp,Change over switch of any capacity ,burnt out copper winding ,current coil ,potential coil and keeping aside for safe custody for re-use, opening the L.T. Panel, removing gasket, dismantling and taking out old parts carefully, disconnecting all conections, & re-assembling all serviceable parts to original position including cleaning , removing sludge, dirt, dust, cleaning of parts including removal of old paint with 02 coat synthetic enamel paint after 01 coat iron red oxide paint along with replacement of nuts, bolts, thimbles, gasket etc as per site requirement including complete testing as per site requirement. Note : All spare parts and rewinding work will be measured and paid seperately under respective item of Sch 'A'. are as under:-

Supply and fixing in repair, connecting, testing and commissioning MCCB 100 Amps , TP , 415 Volts, rupturing capacity 16 KA, 50 Hz including spreader terminals complete all as specified and directed

Supply and fixing in repair, connecting, testing and commissioning MCCB 125 Amps , TP , 415 Volts, rupturing capacity 16 KA, 50 Hz including spreader terminals complete all as specified and directed

Supply and fixing in repair, connecting, testing and commissioning MCCB 160 Amps , TP , 415 Volts, rupturing capacity 25 KA, 50 Hz including spreader terminals complete all as specified and directed

Supply and fixing only on load changeover switch in open execution 4 pole, 415 V, 50 cycles-100 Amp complete all as specified and directed.

MCB TPN capacity 32 Amps, 415V, 50 C/S 10 KA, complete all as specified and directed.

MCB SPN capacity 32 amp, 'C' series, complete all as specified and directed.

S&F MCB single pole 5 to 30 amp rating 'B' Series 240 Volt, complete all as specified and directed.

Set of indicating lamp (Red, Yellow & Blue) LED type, complete all as specified and directed.

Single phase preventor relay as in repair, complete all as specified and directed. Make: L&T/Minilac/C&S or any other equivalent

Supply & fixing only Cast iron non return valve PN-1 flanged ends suitable for 150 mm bore including jointing material complete all as specified and directed Make : Zoloto/Leader/BIR/Upadhaya.

Supply and fixing Cast iron non return valve PN-1 flanged ends suitable for 200 mm bore including jointing material complete all as specified and directed Make : Zoloto/Leader/BIR/ Upadhaya

Supply and fixing cast iron Sluice valve PN-1.6 flanged ends suitable for 350 mm bore including jointing material complete all as specified and directed. Make : Zoloto/Leader/ BIR/ Upadhaya

Supply and fixing cast iron Sluice valve PN-1.6 flanged ends suitable for 150 mm bore including jointing material complete all as specified and directed. Make : Zoloto/Leader/ BIR/ Upadhaya

M&L for repair and replacement of valve pit masonery chamber of size 1200x1200x1000 mm (internal dimension) using PCC 1:4:8 grade stone aggregate for foundation 15 cm thick rendering all around the brick work with 1:6 thick cement mortar PCC 1:2:4 type B1 coping with 20mm grade aggregate for grouting MS frame 40x40x5mm thick angle iron including 4mm thick MS top sheet cover with locking arrangement including 50mm pad lock with double key arrangement. MS frame sheet made out of surface with two coat of synthetic enamell maint over a coat of red oxide primer finishing including necessary excavation in any type of soil returning filling in and removal of surplus soil to a distance n.exc. 15m complete all as specified and directed.

Cutting/ removing of hurbs, shrubs, upto 25 mm dia grith of bushes from ground level and grass in ihe entire area of installation / Pump house area and deposited outside 100 Mtrs from Pump House, complete all as specified and directed. Note : All cutting tools shall be provided by contractor.

Sanjai sales and services

Spectrum Enterprises

MTR GROUP & COMPANY

Magneoflux