Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹45.6 LAccepted-Finance | L1 | Accepted-Finance LOWEST RATE QUOTED | |
| 2 | L2₹49.2 L+₹3.7 L (8.05%)Rejected-Finance SAINIK SOCIETY HITKARINI DENTAL COLLEGE DUMNA ROAD JABALPUR MP 482001 | JABALPUR | JABALPUR | MP | 482001 | L2 | Rejected-Finance HIGHER RATE QUOTED THAN L1 | |
| 3 | L3₹50.6 L+₹5.0 L (11.0%)Rejected-Finance BIDHAN NAGAR MANKAR ROAD PO PS BUD BUD DIST PURBA BARDHAMAN PIN 713403 | BUD BUD | PURBA BARDHAMAN | WEST BENGAL | 713403 | L3 | Rejected-Finance HIGHER RATE QUOTED THAN L1 | |
| 4 | L4₹51.2 L+₹5.6 L (12.3%)Rejected-Finance | L4 | Rejected-Finance HIGHER RATE QUOTED THAN L1 | |
| 5 | L5₹51.8 L+₹6.2 L (13.7%)Rejected-Finance | L5 | Rejected-Finance HIGHER RATE QUOTED THAN L1 |
Tender Value
₹47.0 L
EMD Value
₹94,100
Closing Date
13 Jul 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE PANAGARH
GARRISON ENGINEER PANAGARH, MILITARY ENGINEER SERVICES, PO-PANAGARH, DIST-BURDWAN, WEST BENGAL, PIN-713420
As per BOQ
2024_MES_645761_2
8500-069/E8
Open Tender
Civil Works
Works
180 days
PANAGARH
As per Tender Document
6 documents required · 6 mandatory
₹500
GE PANAGARH
₹94,100
Yes
24 Jul 2024
5 Jul 2024
15 Jul 2024
5 Jul 2024
13 Jul 2024
8 Jul 2024
Amount
Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and directed.
Surface dressing n.exc 15 cm deep and getting out in soft/loose soil complete all as specified and directed.
Excavation in trenches in soft/loose soil n.exc 1.5 m wide and n.exc 1.5 m in depth; for foundation etc or for shafts, wells, cesspits, manholes, pier holes, etc. n.exc 10 sqm on plan and getting out complete all as specified and directed.
Excavation in trenches in any type of soil n.exc 1.5 m wide and exc 1.5 m but n.exc 3.0m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n.exc 10 sqm on plan and getting out complete all as specified and directed.
Removing surplus excavated spoil/earth to a distance n.exc 50M and deposited where directed at a level n.exc 1.5 M above the starting point complete all as specified and directed.
Returning filling in soft /loose excavated soil including spreading leveling watering and well ramming in layers not exceeding 25 CM complete all as specified and directed.
M&L for sand filling uner floors or pavings, laid in layers n.exc 15 cm thick, spread, levelled and blinded with earth and rammed incl watering complete all as specified and directed.
M&L for Moorum/red bajri filling in floors or pavings, laid in layers n exc 15 cm thick, spread, levelled and blinded with earth and rammed incl watering complete all as specified and directed.
M&L for hardcore of broken stone or boulder of gauge exc 63mm but n.exc 75 mm deposited, spread & leveled in lyers n.exc 15 cm thick watered & rammed to a true surface complete all as specified and directed
M&L for Plain Cement Concrete Type D2 1:4:8 (using 40 mm graded stone aggregate) as foundation and mass filling complete all as specified and directed.
M&L for M-25 (Design Mix) using 20mm graded stone aggregate as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concret complete all as specified and directed.
M&L for M-25 (Design Mix) using 20mm graded stone aggregate as in chajjas complete all as specified and directed.
M&L for M-25 (Design Mix) using 20mm stone aggregate Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.
All as per item No 13.00 mentioned above but in slabs supported on walls, beams and columns, in roofs and in shelves and the like complete all as specified and directed.
M&L for M-25 (Design Mix) using 20mm stone aggregate Columns, pillars, piers, posts and struts complete all as specified and directed.
M&L for M-25 (Design Mix) using 20mm stone aggregate as in fins/fascia complete all as specified and directed.
M&L for brick work with fly ash bricks straight or curved on plan exc 6 m mean radius build in CM (1:6) complete all as specified and directed. Make : L&T/ACG/Lafarge/Syam Steel Pvt Ltd
M&L for half brick work with fly ash bricks old size straight or curved on plan to any radius exc 6m mean radius build in CM (1:4) complete all as specified and directed. Make : L&T/Lafarge/ACC/Shyam Steel Pvt Ltd
M&L for 25mm thick PCC 1:2:4 type B0 (using 12.5mm graded stone aggregat)e as in Damp proof course to horizontal or vertical surfaces including necessary formwork complete all as specified and directed
Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for rough finished surface of concrete complete all as specified and directed
Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) for fair finished surface of concrete complete all as specified and directed
Formwork to chullah hoods, chajjas, troughs and similar items including ege for fair finished surface of concreted complete all as specified and directed
Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc for fair finished surface of concrete complete all as specified and directed
Formwork to fins, louvers, fascia for fair finished surface of concrete complete all as specified and directed
Formwork to sides of pillars, posts, struts, piers, columns and stanchions for fair finished surface of concrete complete all as specified and directed
All as per item No 25.00 mentioned above but for sofits of slab complete all as specified and directed.
S&F factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of M.S tubes for top and bottom rails. M.S frame shall be covered with heat moulded plain colour PVC 'C' channel moulded both side Prelam PVC sheet strip of 20mm width stuck inside with solvent cement for stiles prelam PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail; Panelling of both sidePrelam PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying and fixing in the frame at site as per specification and drawing
S&F of solid PVC door frame of size 50mmx47mm made out of 5mm single side prelam PVC sheet & edges will be painted to match with prelam sheet reinforced with MS square tube, suppling and fixing in opening as per specification and drawing.
S&F Butt hinges mild steel 100mm long, medium weight, cooled rolled complete all as specified and directed.
S&F 150mm long extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and directed.
S&F 150mm long extruded Aluminium anodized barrel tower bolt of extruded section and fixed complete all as specified and directed.
S&F Aluminium alloy,300mm long anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed
S&F tubular towel rail 20mm dia "D" type 60 cm long between flange fixed in repair complete all as specified and directed.
S&F MS hat pegs,solid body,125mm to 175mm complete all as specified and directed
M&L for TMT steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed
M&L for TMT steel bars 6 to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed
M&L for TMT steel bars 5mm dia and over upto 10 mm and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed
M&L for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.
S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately) separately)
Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gaskey, etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engr-in-Charge.
Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engr-in-charge.
M&L for 25mm thick plain cement concrete 1:2:4 type B0 (using 12.5mm graded stone aggregate) to receive tiles complete all as specified and directed.
M&L for joint free non skid coloured ceramic tiles 7 to 8mm thick (square or rectangular) area of each tile exceeding 0.06 Sqm but not exc 0.11 sqm in floors set and jointed in neat cement slurry and pointed in coloured cement to match the shade using coloured tiles incl 15mm thick screed bed in CM (1:4) complete all as specified and directed (Note : Design, shade and pattern of fixing of tiles shall be as directed by Engr-in-charge)
M&L for joint free Glazed ceramic coloured tiles in vertical surfaces 450 x 350mm x 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement ot match, with backing coat 10mm thick in CM (1:3) complete all as specified and directed (Note : Design, shade and pattern of fixing of tiles shall be as directed by Engr-in-charge)
M&Lfor 75 mm thick, Cement concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate), as in sub base complete all as specified and directed.
M&L for 50mm thick PCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in floor with nominal reinal reinforcement finished even and fair complete all as specified and directed
M&L for 75mm thick PCC 1:3:6 type C1 (using 20mm graded stone aggregate) as in plinth protection finished even and smooth with out using extra cement complete all as specified and directed
M&L Rendering 15 mm thick cement plaster in CM 1:4 on other than fair faces of brick/concrete surfaces finished and smooth without useing extra cement and using water proofing compound @ 3% by weight of cement content complete all as specified and directed. Note :- WPC will measuered and paid separatly under relevant item of schedule.
Supply only intergral water proofing compound (liquid admixture) complete all as specified and directed (Makes : Pidilite Industries/ Impermo/Snowcem India Ltd/Sika)
M&L for 15mm thick in cement plaster CM (1:6) on brick or concrete surfaces finished even and smooth without using extra cement on wall complete all as specified and directed
M&L for rendering 5 mm thick in CM (1:3) on ceiling finished even and smooth without using extra cement etc complete all as specified and directed
M&L for 10mm thick in cement plaster CM (1:4) on brick or concrete surfaces finished even and fair with using water proofing compound complete all as specified and directed
M&L for preparation of new surfaces of roof and applying two coats of Polyurethane (PU) acrylic based water proofing liquid compound over and including one coat of self priming primer @ one litre per 10 Sqm with reinforcing fabric sheet as per manufacturer's instructions to stop leakage/seepage from roof/wall complete all as specified and as directed by the Engr-in-Charge (Notes :- (i). As per description of this item, minimum two coats of Polyurethane (PU) acrylic based water proofing liquid compound over one coat of primer shall be carried out as per manufacturer's instruction. Please note no price adjustment shall be made, if as per manufacturer's instructions more coats of Polyurethane (PU) acrylic based water proofing liquid compound and primer are required for roof treatment. (ii). Quoted Rate shall be deemed to be included for work in building/structure of any height.
M&L for three coats of white wash as in ceilings on newly plastered surfaces including preperation complete all as specified and directed
M&L for preparation of newly plaster surface on wall and apppying two coat of oil bound distemper over a coat of alkali resistant primer and 1mm thick wall putty including preparing the surface even and smooth over new plastered surface complete all as directed by Engr-in-Charge.
M&L for three coats of white wash as on walls on newly plastered surfaces including preparation complete all as specified and directed
M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed. (Make: M/s Apex Ultima of Asian/ Weather Coat all guard of Berger/Xtra Tough of Shalimar)
S&F Sheet glass, 4.0 mm thick ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane complete all as specified and directed.
S&F Sheet glass, 4.0mm thick pin headed quality and glazing with oil putty in square n exc 0.5 sqm in each pane complete all as specified and directed.
M&L for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.
S&F GI pipe medium grade 15 mm dia bore as in walls complete all as specified and directed
S&F GI pipe medium grade 20 mm dia bore as in walls complete all as specified and directed.
S&F in repairs 15mm CP angular stop cock with flange complete all as specified and directed.
S&F in repairs 15 dia fancy type chromium plated bib taps cast copper alloy with crutch or butterfly handle, screwed down screwed for iron pipe complete all as specified and directed.
S&F pillar taps, cast copper alloy, fancy type, chromium plated, screwed down high presure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts screwed for iron pipe and fixed in repairs complete all as specified and directed.
S&F Vitreous china Squatting pan Orissa pattern of size 580mmx440mm wite with integral foot rests (excluding flushing cistern and flush pipe) complete including concrete bedding in repairs complete all as specified and directed.
S&F PVC valveless syphonic action type flushing cistern 10 lit capacity low level white with inlet, ball valve, float and handle including brackets and 32mm PVC flush pipe in repairs complete all as specified and directed.
S&F PVC connection 15mm size with PTMT nuts of length 450mm as in repair complete all as specified and directed.
S&F vitreous china wash basin, white, flat back size 550x400mm, incl cutting for and pinning in ends of brackets or erecting stand but excl taps, pvc conections but incl brackets,wastevpipe,waste coupling in repairs complete all as specified and directed.
S&F 500 litre capacity rotational moulded polythylene water storage tank (cylindrical vertical with closed top minimum three layer) hoisted and fixed in position all as per specified in SSR part-I complete all as specified and directed. Make: Sintex/Prayag/Vectus
S&F PVC ball valves high pressure with polythene float and fly nut complete, screwed for iron pipe of 20mm bore in repair complete all as specified and directed. Make : Prayag/Vectus/Polytuf
S&F brass chromium plated shower rose 125 mm size fixed in repair complete all as specified and directed
S&F PVC grating doom 100 mm dia complete all as specified and directed
S&F PVC (SWR) floor trap, plain with grating including jointing with solvent cement of dia of out let 75mm complete all as specified and directed
S&F PVC (SWR) pipes of 75mm dia double socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed Make : Supreme/Finolex
S&F PVC (SWR) pipes of 110 mm dia double socketed, in any length with rubber ring joints laid in floors complete all as specified and directed Make : Supreme/Finolex
S&F PVC (SWR) door bends any radius for 75 mm bore dia complete all as specified and directed.
S&F PVC (SWR) bends any radius for 110 mm bore dia complete all as specified and directed.
Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting n.exc 10 cm girth complete all as specified and directed
S&F Brass CP bracket fancy type suitable for fixing of 25 mm dia curtain rods complete all as specified and as directed.
S&F stainless steel rod 25mm dia as in curtain rod complete all as specified and directed
M&L for PCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in coping, benching. Hauncing etc finished even and smooth complete all as specified and directed
M&L for RCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces etc set in CM (1:6) complete all as specified and directed
Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc complete all as specified and directed
M&L for PCC 1:3:6 type C2 Concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested; in complete all as specified and directed
S&F UPVC Eco Drain pipe drainage sewaer system pipe bearing 160mm dia minimun 4mm thick including jointing with coupler, bend, tee as per site requirement complete laid in trenches or floors complete all as specified and as directed Note: PCC haunching will be measured and paid seperately
M&L for 25 Users Septic tanks, exc, in ordinary soil, foundation In PCC 1:2:4, brick work in CM 1:4, RCC Slab covers including RCC precast manhole cover having 6mm plate embedded all around/fibre reinforced cover with angle iron frame Vent shaft and sludge chambers etc., complete all as specified and directed
M&L for Soakage wells exc, in ordinary Soil, Foundation in PCC 1:3:6, wells of Honey combed and solid in M-25 Concrete, including intercepting chamber, screen chamber Brick work in CM, RCC cover slab in M-25/ RR masonry / Filling with brick complete all as specified and directed
M&L for RCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in preacast man hole cover slabs set in CM (1:6) complete all as specified and directed
Excavation over areas n.exc 1.5m depth and getting out in soft/loose soil complete all as specified and directed
M&L for 100 mm thick, Cement concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate), as in sub base complete all as specified and directed.
M&L for PCC 1:3:6 type C1 (using 20mm graded stone aggregate) as in Kerb including necessary form work complete all as specified and directed
M&L for Machine pressed pre-polished coloured precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigments complete all as specified and directed
M&L for PCC 1:3:6 type C1 as in lintels / beam upto 1.5m clear span, and other similar bands, copings, kneelers, apex stones, bed plates, kerbs and haunching/ benching, water troughs and the like including weathering, slightly rounded or chamfered ang complete all as specified & directed
Dismantling of plain or corrugated Asbestos cement sheeting, any gauge, thickness, flat or curved incl ridges hips valleys as in roof coverings complete all as specified and directed.
S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick 150 GSM of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel as in ridges sheet 0.50mm thick 150 GSM of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
Taking down cement plaster of any description on brick or stone walls or from concrete surface incl racking out joints hacking for key scrubbing with water etc complete all as specified and directed.
M&L for prepration of newly plastered surfaces of wall to prepare the surface even and smooth by applying two coat of oil bound distemper over one coat of alkali resistant primer incl 01 mm thick wall putty for complete smooth surfaces all as specified and as directed by Engr-in-charge.
M&L for prepration of old plastered surfaces of wall to prepare the surface even and smooth by applying two coat of oil bound distemper over one coat of alkali resistant primer incl 01 mm thick wall putty for complete smooth surfaces all as specified and as directed by Engr-in-charge.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.
S&F mild steel as in trusses, purlin, crane rail and joist, channel anlge or tee sections including all necessary cutting welding etc complete fonforming to FE 410 W( Gde-E-250) quality A complete all as specified and directed.
M&L for two coats synthetic enamel paint over a coat of red oxide primer on new steel surfaces incl preparation of surfaces over 10 cm width or girth complete all as specified and directed.
Demolition of Brickwork masonry, laid in Cement mortar complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
Taking down shutters of any description exc 1 sq.m each complete all as specified and directed by Engr-in-Charge
S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed..
M&L for 75 mm thick PCC 1:3:6 Type C2 as in plinth protections finishing even and smooth without using extra cement and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed.
S&F 100 mm long butt hinges, extruded alluminium alloy/ stain less steel with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and directed.
S&F 200 mm long Aluminium, anodised, barrel tower bolt of extruded section complete all as specified and directed.
S&F aluminium handles, cast type, anodised 200mm long complete all as specified and directed.
Taking down steel tubing having bore of pipe 15 mm and connections, including cleaning for refixing or removal to store complete all as specified and directed
Taking down steel tubing having bore of pipe 20 mm and connections, including cleaning for refixing or removal to store complete all as specified and directed
S&F Galvanised steel tubes, medium grade with bore of pipe in 15 mm complete all as specified and directed.
S&F Galvanised steel tubes, medium grade with bore of pipe in 20 mm complete all as specified and directed.
S&F in repair bib taps of 15mm bore fancy type, chromium plated cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for brass ferrule complete all as specified and directed.
S&F vitreous china wash down water closet pan, pedestal pattern Pedestal pan and trap (excluding flushing cistern and flush pipe),connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc and including plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel CP or aluminised hinging device all as specified and directed.
S&F in repair 15mm bore fancy type stop valve , chromium plated concealed type cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.
S&F in repair PVC connection 15mm size PTMT nuts of length 600mm complete all as specified and directed.
S&F in repair 15mm bore pillar taps cast copper alloy,with capstan heads,chromium plated,screwed down, fancy type high pressure, with or without lettred 'HOT or COLD' with long screwed sunk and fly nuts complete all as specified and directed.
S&F as in grating square 150mm size of PTMT(minimum 100 gms) complete all as specified and directed.
Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15 cm thickness (below or above ground level) complete all as specified and directed.
M&L for Cement concrete 100 mm thick type B- 2, 1:2:4 (using 20 mm graded stone aggregate) laid on concrete floors and pavings; laid over cement concrete subfloors etc. and finished to an even and rough surface as specified and as directed by Engr-in-charge.
S&F as in repair chromium plated shower roses 125 mm long with or without swivel joints, any size, including fixing fixing to steel pipe or union complete all as specified and direceted.
Taking down of pipes of any size or pattern including all fittings complete all as specified and directed.
S&F PVC (SWR) junction single (single T) equal or unequal provided with access door of 110 mm dia complete all as specified and directed.
S&F 75 mm dia PVC (SWR) floor trap, plain with gratings incl jointing with solvent cement complete all as specified.
S&F health faucet (ABS body) mild steel chromius plated suitable for 15mm dia pipe with 1.25 mtr long flexible tubeand ABS wall hook including making connections and fixed in position complete in all respect as specified and directed.
S&F in repair toilet paper holder, with flat recessed type stainless steel anf fixed to walls with chromium plated brass screws complete all as specified and directed.
S&F in repair waste coupling of PTMT(Half or full threaded), 32mm bore dia of discharge pipe (min wt 45 gms) complete all as specified and directed.
S&F in repair sheet glass shelf assembly consisting of 5.5 mm thick sheet galss shelf 12 cm wide with cromium plated bracket guard and railing 60 cm long complete all as specified and directed.
S&F in repair tubular towel rail, brass chromium plated 20 mm dia `D' type 60 cm long between flanges complete all as specified and directed.
Hacking out old broken glass (any thicknesss, size,quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.
M&L for sheet glass 5.5 mm thick ordinary quality and glazing with rubber gasket and pin in square n.exc 0.50 sqm in each pan complete all as specified and directed.
All as per item No 136.00 mentioned above but frosted glass complete all as directed by Engr-in-Charge.
Providing precast cement concrete louvres and jallies, type B0 1:2:4 (12.5mm graded aggregate), 25mm thick (measured solid), including all mouldings but excluding frame (Pre cast frame shall be measured separately and paid for under item and set in CM (1:4) complete all as specified and directed.
S&F in repair for Gun metal gate valve, 20 mm bore, cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions all as specified and as directed.
M&L for providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with CM (1:3) (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed
M&L for Pre-polished machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade with grey cement and pigment complete all as specified and directed
Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar complete all as specified and directed.
S&F Reinforced concrete pipes, class NP2, 200 mm bore laid and jointed in trenches or in floors complete with collar all as specified and as directed.
Demolition of brick work built in cement mortar or cement lime mortar incl all quoins, arches pillars etc and removing unserviceable material exc 100 mtr as complete all as specified and directed.
M&L for cement concret in manhole chamber bed PCC 1:3:6 type C1 (using 20mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and directed.
Demolition of RCC(other than ground floor) pillar, beams landing, chajjas, slab shelves & similar suspended work (reinforcement cut as required to facilitate demolition) and removing unseviceable material complete all as specified and directed
M&L for Extra for forming 40 cm inner girth fair finished drains or channels i.e. exc 30cm inner girth in cement concrete using extra cement including forms, moulds, mitred/ stopped ends etc complete all as specified and directed.
Removing Excavated soils exceeding 250 M but not exceeding 500 M and depositing where directed at a level not exceeding 1.5 M above the starting point complete all as specified and directed
M&L for Cement concrete 75 mm thick type B- 1, 1:2:4 (20 mm graded aggregate) laid on concrete floors and pavings; laid over cement concrete subfloors etc. and finished to an even and rough surface with nominal reinforcement, complete all as specified and as directed by Engr-in-charge. (Note: Reinforcement will be measured and paid separately)
Fixing only Pre-painted galvalume aluminum zinc coating GI based Plain steel as in ridges sheet 0.50mm thick 150 GSM of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed
S&F wind ties for roof including securing bolts, flat iron fillets(for securing weather boarding with screw bolts and nuts) includingall necessary drilling or riveting etc and similar work fonforming to Fe 410-O or Fe-310-O including painted with one soap coat of zinc cromate primer paint (including prepration of surfaces at contractor's workshop before fabrication) complete all as specified and directed
Dismantling wall and ceiling board of any descrition complete all as specified and directed.
M&L for providing and fixing 10mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface over 2nd class soft wood fillets, or metal frame work and reinforced with G.I. wire mesh (Fillets, metal frame work and G.I. wire mesh paid separately) complete all as specified and directed.
S&F Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre, size of grid 605 x 605mm complete all as specified and directed.
S&F Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long, size of grid 605 x 605mm complete all as specified and directed.
M&L for 200mm thick Kankar or laterite,with mix of fly ash, clinker & stone dust in the proportion of 1:3:6 ( i.e. 10% fly ash,30% clinker & 60% stone dust ) laying in layers n.exc 100mm thick ,watering ,ramming and compacted complete all as directed by Engr-in-charge .
Dismantling wrought iron or mild steel work of any description not otherwise provided, for rusted members of steel trusses/ purlins, complete all as specified and directed
S&F mild steel as Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. complete all as specified and directed.
S&F Mild Steel Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) of Fe 410-W (Gde E- 250) quality 'A' forming holes, without any attachment complete all as specified and directed.
M&L for sheet glass 5.5 mm thick ordinary quality and glazing with rubber gasket and pin in square exc 0.50 sqm in each pan complete all as specified and directed.
Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc complete all as specified and directed.
M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, complete all as specified and directed.
Marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills,cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with green marble shade complete all as specified and directed.
Taking down chowkats or frames with shutter w/o taking off shutter from the frame n exc 1.5 Sqm each incl cutting holes for taking out hold fast or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt.) all as specified and directed by Engr-in-charge.
Taking down chowkats or frames with shutter w/o taking off shutter from the frame exc 1.5 Sqm & n. exe 4 Sqm each incl cutting holes for taking out hold fast or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt.) all as specified and directed By Engr-in-charge.
S&F door closer aluminium (extruded section) body, hydraullically regulated, designation No.2, universal type, suitable for door shutters and weight between 36 to 60 kg and fixed complete all as specified and as directed.
M&L for PCC(1:3:6) type C-1 (using 20mm graded stoneaggregate) as in bed blocks for hold fast including necesssary formwork complete all as specified and directed.
S&F mild steel flat iron as in hold fast, clamps articles conforming to FE 290 Gde-E-165 complete all as specified and directed..
S&F CPVC pipes laid in floors/ trenches with outer dia 16 mm dia with all fittings anf fixtures complete all as specified and directed.
S&F CPVC pipes laid in floors/ trenches with outer dia 20 mm dia with all fittings anf fixtures complete all as specified and directed.
S&F elbow operated bib taps of 15mm bore fancy type, chromium plated cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for brass ferrule complete all as specified and directed.
S&F Vitreous China wash basin, white, flat back, size 580x450 mm (for Hospilal use) excluding taps, waste, chain and plug and porcelain stopper but including brackets, complete all as specifid and directed.
S&F Pillar taps, 15mm bore, fancy type cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'HOT or COLD' with long screwed shanks and fly-nuts, screwed for iron pipe or for connection pipe complete complete all as specified and directed.
S&F PVC waste pipe 32mm dia for wash basin and sink 01 mtr to 3 mtr as per tequred with cap complete all as specified and directed.
S&F 32 mm bore Waste coupling of PTMT (half or full threaded) (Minimum weight 32mm45gms/40mm-60 gms complete all as specified and directed.
S&F soap dish vitreous china white size 160x160x90mm approx fixed to plugs with CP brass screws complete all as specified and directed.
S&F stop valve of 15mm bore, chromium plated with long shank and cup concealed type cast copper alloy, screwed down, high pressure, with crutch handle, screwed both ends for brass ferrule complete all as specified and directed.
Excavating over areas, n.exc 1.5 m deep and getting out soft/ loose soil complete all as specified and directed.
S&F repair grating square 150mm size of PTMT (minimum weight 100 gms) complete all as specified and directed
S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, complete all as specified and directed.
S&F CP tubular towel rail 20mm dia D type 60cm between two flanges complete all as specified and directed by Engr -in-Charge.
E/M PORTION Material and labour point wiring for light point/ fan point, one light/fan/exhaust fan point controlled by one, one way switch using 1.5 sqmm nominal cross sectional area multistranded copper conductor ,PVC insulated unsheathed FRLSH cables in and including 20 mm dia or higher size PVC concealed conduits and fittings of medium grade, including pressed steel terminal switch boxes, 3 mm thick bakelite sheet top cover (ISI Marked) fitted with chromium plated brass screws & washers and 1.5 sqmm nominal cross sectioanl area multistranded copper conductor FRLSH PVC insulated unsheathed earth wire and connecting to earth dolly and brass screws, washers etc. complete all as specified and directed.
All as per item No 182.00 above but One 3 pin 5 Amps socket out let points on independent board complete all as specified and directed.
All as per item No 182.00 above but 5 Amp socket on same board with other switches complete all as specified and directed.
M&L for wiring for socket out let on independent Boards controlled by one, one way switch using 4.0 sqmm nominal cross sectional area multistranded copper conductor, PVC insulated unsheathed FRLSH cables in and including 20 mm dia or higher size PVC concealed conduits and fittings, including pressed steel terminal switch boxes , 3 mm thick bakelite sheet top cover (ISI Marked) fitted with Chromium plated brass screws & washers and 4.0 sqmm nominal cross sectioanl area multistranded copper conductor ,PVC insulated unsheathed FRLSH cable earth wire and connecting to earth dolly and brass screws, washers etc. complete all as specified and directed.
S&F switch piano flush type, single pole, 5/6 Amps, one way complete all as specified and directed.
S&F ceiling rose surface bakelite 65 mm x 50 mm two to three terminal suitable for 230 Volts AC 6 Amps complete all as specified and directed.
S&F socket outlets 2 in 1, 3 pin, 5/6 Amps flush type 230/240 V complete all as specified and as directed
S&F switch socket combination 5 in, 6 pin, (5/16 Amps) flush type controlled by one switch complete all as specified and directed.
S&F switch socket combination 2 in 1 multipurpose 5 pin, (6 Amps) flush type controlled by one switch complete all as specified and directed.
S&F stepped type electronic fan regulator flush type 240 Volts ISI marked complete all as specified and directed.
S&F lamp holder, PVC/polycarbomate type with back plate straoght of angle suitable for LED lamp complete all as specified and directed
S&F submain two single core 4 sqmm nominal cross sectional area multistranded copper conductor FRLSH cable PVC insulated unsheathed 1100 volts grade drawing in and suitable size PVC conduit (ISI Marked) concealed including 4 sqmm nominal cross sectional area multistranded copper conductor FRLSH cable, PVC insulated unsheathed 1100 volts grade earth wire complete all as specified and directed.
S&F ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete allas specified and directed. Make: Usha/Havells/Bajaj/CG
S&F LED light fitting 1 x 20 watt box type with same make LED tube rod side connection AC decorative boxype 4' long wih driver, holder including LED tube connecting up with complete all accessories andconnection from ceiling rose with twin core twisted flexible copper conductor cable withsuitable size and earthing complete all as specified and directed. Make : Bajaj/Havells/Jaquar/CG
S&F LED battem mirror light fitting 1 x 10 watt box type, Polycarbonate, cool day light, 6500K,1000 lumens with accessories complete all as specified and directed. Make: CC/Crompton/ Havells/ Jaguar/Bajaj
S&F wall LED security light fittings 35 watt, 230 volts, minimum lumn output 100 lumen/watt, made up ofpressure dia cast housing with prismatic polycarbonate difuser and industrial LED with secondary optic and IP-65/66 including neccessary connection complete with all accessories including connected with 3 core copper cable of suitable 1.5 sqmm size complete allas specified and directed. Make : Bajaj/Havells/Jaquar/CG
Supply only ventilating metalic body exhaust fan 300 mm sweep 230 volt AC, heavy duty complete with louver and all accessories including cutting hole of suitable size, making good surface by doing plaster and applying two coat of distemper complete with fixing arrangement to wall connected with twin core twisted flexible copper conductor (23/.0076) of suitable size complete all as specified and as directed.
S&F epoxy powder coated sheet metal enclosure for DBs, double door, Single pole and neutral,8 ways with mounting fitted with bus bar, DIN channel, neutral link and incoming contact complete all as directed. Make : Legrand/ABB/Schneider/Hager
S&F MCB SPN 32 Amps, 'C' series 10kA, 240 Volts and to be housed in DBs complete including necessry connection all as specified and directed. Make : Legrand/ABB/Schneider/Hager
S&F MCB SP 6-32 Amps, 'C' series 10kA, 240 Volts and to be housed in DBs complete including necessry connection all as specified and directed. Make : Legrand/ABB/Schneider/Hager
M&L for earthing complete with galvanised mild steel earth plate electrode 600x600x6.0mm thick, burried directly in ground to a depth not less than 2.25 metres deep below ground level with top edge of earth plate not less than 1.5 metre below normal ground level surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all around the plate, using GI wire 4 mm dia as earth wire electrode bolted or rivetted to earth plate at one end and connected to equipments at another end, GI earth wire encased in and including 15 mm dia GI 'light grade' pipe asprotection pipe from upper end of earth plate upto equipments,20 dia bore GI pipe 'light grade' as water pipe from earth chamber to upper edge of earth plate, Test point , GI funnel with wire mesh fixed on water pipe and PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in pit chamber and RCC pit cover 50mm thick precast RCC 1:2:4 type B-1, duly reinforced with MS round bars 6mm dia @ 100 c/c both ways with 10mm dia MS round bar as in lifting handles, excavation, earth work including laying the GI pipe concealed in floor/wall all as described in electric plate of SSR Part I complete all as specified and directed and testing on completion.
Supply, laying, connecting, testing and commissioning of LT under ground cable XLPE insulated, aarmoured heavy duty electric cable with aluminium conductor , 1100 vlts grade , crsectional area 10 sqmm 2 core complete all as specified and directed Note:- (i) Excavation,sand cushioning,brick will be measured and paid separtely.
M&L for river sand, washed and screened dry for cushioning to under ground cable in trenches below and around under ground cable including spreading and levelling complete as specified and directed . Note :- Punned thickness 18 cm shall only be considered for payment
Supply and lay in trenches fly ash bricks, for cable protection all as specified and directed by the Engr-in-Charge.
S&F Pipes galvanized, 50 mm bore “light grade”, supplied and laid complete including necessary fittings such as tees, bends, elbows, sockets, reducers etc as per site requirement or specified complete all as specified and directed.
Taking down carefully aluminium conductor point wiring (light, fan, socket or power) complete including fittings such as switches,ceiling roses, pendants, regulators ,sockets etc. and removing (except those to be reused shall be kept in safe custody at the site ) and making good disturbed surfaces of walls, floors etc.to match with the existing complete all as specified and directed.
Material and labour wiring for socket outlet 3 pin, 15 amps on independent Boards controlled by one, one way switch using 2.5 sqmm nominal cross sectional area multistranded copper conductor, PVC insulated unsheathed FRLS cables in and including 20 mm dia or higher size PVC concealed conduits and fittings, including pressed steel terminal switch boxes/ modular , 3 mm thick bakelite sheet top cover (ISI Marked) fitted with Chromium plated brass screws & washers and 2.5.0 sqmm nominal cross sectioanl area multistranded copper conductor , PVC insulated unsheathed FRLS cable earth wire and connecting to earth dolly and brass screws, washers etc. complete all as specified and directed.
S&F switch 16 Amps, 230/240 V complete all as specified and as directed by Engr-in-Charge
S&F socket outlet 2 in 1 , 6 pin , (16 Amps ) flush type controlled by one switch complete all as specified and directed by Engr-in-Charge
S&F ceiling rose surface bakelite 45 mm x 50 mm two to three terminal suitable for 230 Volts AC 6 Amps complete all as specified by Engr-in-Charge
S&F lamp holder, polycarbonatebody with back plate straight or angular suitable for batten fittings complete all as specified.
S&F LED light fitting 1x 20 W bulkhead luminaries including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. Make : Havells/CG/Bajaj/Jaquar
S&F LED light fitting 1x10 watt / bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. Make : Havells/CG/Bajaj/Jaquar
S&F LED light fitting mirror type with high output diffuser 2 feet long, 10 watt 220 volt AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. Make : Havells/CG/Bajaj/Jaquar
S&F exhaust ventilation fan with louvers of sweep 300mm,230 volts, with blade and frame and loures steel body,ISI marked complete all as directed by Engr-in-Charge.
S&F in repairs epoxy powder coated sheet metal enclosure for DBs, double door (when MCBs to be used), Single pole and neutral 240 V, 8 ways with mounting fitted with bus bar, DIN channel , neutral link and incoming contact complete all as specified and directed. Make :Havells/ABB/legrand.
S&F 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified and directed. Make :Havells/ABB/legrand.
S&F in repairs MCB SPN 32 Amps, 'C' series 10kA, 240 Volts and to be housed in DBs complete including necessry connection all as specified and directed. (Note :- Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating) Make: ABB/L&T/Legrand
S&F XLPE armoured cable 10 sqmm 2 core,1100 volts grade heavy duty cable,ISI marked passing through pipe, with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed complete all as sepcified.
M&L for burnt clay fly ash bricks locally available of size 25 x 12.5 x 7.5 cm laid dry width wise across the line of cable in trenches for protection of UG cable complete all as specified and directed.
S&F GI Light grade 40 mm dia of size for road cross/cutting on wall floor drain etc complete all as specified and directed.
S&F 1000 Ltrs capacity Rotational / moulded Polyehtylene water tank (Cylindrical vertical with closed top minimum three layer ) hoisted &including dismantling, fixed in position complete all as specified directed Make : Vectus/Sintex/Prayag
S&F in repair of high pressure PTMT float valve with epoxy coated alluminium rod and high density polythene ball screwed for irom pipe 25 mm bore dia with fly nut complete all as directed by Engr-in-Charge.
S&F in repair 25mm bore GI tubing medium grade in trenches/ Floor / pillar connetion in old or new postion including fittings all as specified & as directed including taking down old unseviceable pipe complete all as specified and directed.
All as per item No 225.00 mentioned above but 40 mm bore all as directed by Engr-in-Charge
S&F in repair 25 mm bore dia pipe gun metal globe or gate valves, yoke type, full opening with iron wheel head, screwed both ends heavy duty, ISI marked complete for iron pipes complete all as specified and directed.
S&F 40 mm bore dia pipe gun metal globe or gate valves, yoke type, full opening with iron wheel head, screwed both ends heavy duty, ISI marked complete for iron pipes complete all as specified and directed.
All as per Item No 228.00 mentioned above but 5 Amp calling bell point with other switches complete all as specified and directed..
M&L for wiring for socket 20/25 Amp sheet metal on independent boards controlled by one, one way switch using 4.0 sqmm nominal cross sectional area multistranded copper conductor, PVC insulated unsheathed FRLSH cables in and including 20mm dia or higher size PVC concealed conduits and fittings including pressed steel terminal switch boxes, 3 mm thick bakelite sheet top cover (ISI Marked) fitted with Chromium plated brass screws & washers and 4.00 sqmm nominal cross sectioanl area multistranded copper conductor FRLSH PVC insulated unsheathed earth wire and connecting to earth dolly and brass screws, washers etc. complete all as specified and directed complete all as specified and directed.
S&F Bell switch piano flush type, single pole, 5/6 Amps, one way complete all as specified and directed By Engr-in-Charge.
S&F Buzzer, Ding dong, AC 230 Volts, single pole 230 volts complete all as specified and directed
S&F sheet metal enclosure with 20/25 Amp Mcb and two pin and earth plug and socket complete with one single pole MCB all as specified By Engr-in-Charge. Make : ABB/Legrand/Hager/Schneider
S&F submain two single core,10 sqmm nominal cross sectional area multistranded copper conductor FRLSH cable, PVC insulated unsheathed 1100 Volts grade drawing in and including nd including suitable size PVC conduit (ISI marked), concealed, including 10 sqmm nominal cross sectional area multistranded copper conductor FRLSH cable, PVC insulated unsheathed 1100 Volts grade earth wire complete all as specified and directed. (Note: (i) Quoted rate shall be deemed to be included for necessary chasing/cutting and making good the surface. (ii) Three runs cable & PVC conduit pipe shall be meaured as single unit)
S&F submain two single core,6 sqmm nominal cross sectional area multistranded copper conductor FRLSH cable, PVC insulated unsheathed 1100 Volts grade drawing in and including nd including suitable size PVC conduit (ISI marked), concealed, including 6 sqmm nominal cross sectional area multistranded copper conductor FRLSH cable, PVC insulated unsheathed 1100 Volts grade earth wire complete all as specified and directed. (Note: (i) Quoted rate shall be deemed to be included for necessary chasing/cutting and making good the surface. (ii) Three runs cable & PVC conduit pipe shall be meaured as single unit)
S&F LED luminire (CW) 600x600mm 36/40 watt 220 Volt AC reccessed type with high efficency PMMA diffuser soft glare free light complete with driver, holder & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conducter cased of suitable size complete all as specified and directed.
S&F 6 W surface mounted round LED downlight coloured (CW), aesthetically designed made by auminium P-die-cast enclousers, with seperate replaceable constant current driver 12 watts for grid ceiling ,including necessary connection complete all as specified and directed. Make : Havells/CG/Bajaj/Jaquar
S&F as in repair epoxy powder coated sheet metal enclosure for DBs, single door, Single pole and neutral, 415V, 4 ways, with mounting fitted with 2 bus bar, DIN channel, neutral link and incoming contact complete all as specified and directed. Make : ABB/Legrand/Hager/Schneider
S&F 100 Amp MCCB 4 pole, 3 phase, 415 volt of capacity Amp, 16 KA complete with proper copper thimbles, copper reducer etc complete all as specified and directed Make : ABB/Legrand/Hager/Schneider
S&F 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified and directed Make :Havells/ABB/Legrand.
S&F in repair MCB SPN 32 Amps, 'C' series 10KA, 240 Volts and to be housed in DBs complete including necessry connection complete all as specified and directed. Make : ABB/Legrand/Hager/Schneider
SINGH CONSTRUCTION
S.D.ENTERPRISE
M/s sadhan kumar mukherjee
KAZI SAHABUL ALAM
Jaibalaji Enterprise
M/S BHATTACHARJEE ENTERPRISE
M/S DYNAMIC INDIA (PROJECT) CONSTRUCTION
N B CONSTRUCTION
stage.html
html • 0.06 MB
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .