Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹27.1 LAccepted-AOC | L1 | Accepted-AOC Accepted | |
| 2 | L2₹27.6 L+₹47,935.60 (1.77%)Rejected-Finance | L2 | Rejected-Finance Second lowest | |
| 3 | L3₹28.9 L+₹1.7 L (6.42%)Rejected-Finance | L3 | Rejected-Finance Third lowest | |
| 4 | L4₹29.3 L+₹2.2 L (8.09%)Rejected-Finance | L4 | Rejected-Finance Fourth lowest | |
| 5 | L5₹31.1 L+₹3.9 L (14.5%)Rejected-Finance | L5 | Rejected-Finance Fifth lowest |
| Sl No | Description | Qty | Unit | M/S MAHADEV M PATIL L4 | M/s B C CHOUGULE L6 | RAJENDRA KRISHNA SARAF L3 | M/s. N D KALING L1 | M/S ADITYA CONSTRUCTIONS L8 | Vinod Enterprises L5 | M/s PRATAP VIJAYSINGHRAO DESAI L2 | Peerzada And Sons L7 |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Demolition of cement concrete (unreinforced) in ground floor and pavings n exc 15cm thickness below or above ground level all as specified and removing rubbish off the premises complete all as specified and directed. | 27 | Cum | 200 ₹5,400 | 300 ₹8,100 | 300 ₹8,100 | 200 ₹5,400 | 500 ₹13,500 | 150 ₹4,050 Lowest | 180 ₹4,860 | 600 ₹16,200 |
| 2.00 | M&L for 25mm thick plain cement concrete 1:2:4, type B0 (using 12.5 mm graded stone aggregates) as in sub-floors, sub-bases, floors and pavings complete all as specified and directed | 342 | Sqm | 125 ₹42,750 | 200 ₹68,400 | 100 ₹34,200 | 70 ₹23,940 Lowest | 190 ₹64,980 | 200 ₹68,400 | 225 ₹76,950 | 125 ₹42,750 |
| 3.00 | M&L for machine cut Kota stone slab flooring 20mm to 25mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing with beeswax polish laid over and including 20mm screed bed in cement mortar 1:4 complete all as specified and directed. | 302 | Sqm | 1,200 ₹3,62,400 | 1,100 ₹3,32,200 Lowest | 1,400 ₹4,22,800 | 1,250 ₹3,77,500 | 1,500 ₹4,53,000 | 1,300 ₹3,92,600 | 1,260 ₹3,80,520 | 1,350 ₹4,07,700 |
| 4.00 | M&L for machine cut Kota stone slab 20mm to 25mm thick in riser of steps, skirting, dado and pillar laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing with beeswax polish laid over and including 10mm thick backing coat in cement mortar 1:3, complete all as specified and directed. | 26 | Sqm | 1,250 ₹32,500 | 1,100 ₹28,600 Lowest | 1,100 ₹28,600 Lowest | 1,200 ₹31,200 | 1,500 ₹39,000 | 1,300 ₹33,800 | 1,260 ₹32,760 | 1,600 ₹41,600 |
| 5.00 | M&L for roughening surface of old concrete floor by picking, sweeping clean and washing down with water to remove dust and brushing with neat cement slurry @ 3Kg of cement per Sq metre including removing existing tarfelting complete all as specified and directed. | 100 | Sqm | 30 ₹3,000 Lowest | 60 ₹6,000 | 30 ₹3,000 Lowest | 30 ₹3,000 Lowest | 40 ₹4,000 | 50 ₹5,000 | 99 ₹9,900 | 80 ₹8,000 |
| 6.00 | M&L for plain cement concrete, 75mm thick, 1:3:6, type C-1 (using 20mm nominal size crushed and graded stone aggregates) for plinth protection including filling of expansion joint with bituminous mixture finished fair and even complete all as specified and directed. | 100 | Sqm | 350 ₹35,000 | 260 ₹26,000 | 280 ₹28,000 | 250 ₹25,000 Lowest | 350 ₹35,000 | 330 ₹33,000 | 270 ₹27,000 | 380 ₹38,000 |
| 7.00 | Taking down chowkats or frames not exc 1.5 sqm each (without taking of shutters from the frame) complete all as specified and directed. | 71 | Each | 70 ₹4,970 | 30 ₹2,130 Lowest | 40 ₹2,840 | 100 ₹7,100 | 120 ₹8,520 | 110 ₹7,810 | 150 ₹10,650 | 100 ₹7,100 |
| 8.00 | M&L for cutting holes in stone masonry wall built in cement mortar for inserting hold fasts exc half brick but not exc full brick wall from the face of jambs and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4, type B1 (using 20mm graded crushed stone aggregates) complete all as specified & directed. | 220 | Each | 50 ₹11,000 | 150 ₹33,000 | 50 ₹11,000 | 60 ₹13,200 | 300 ₹66,000 | 30 ₹6,600 Lowest | 180 ₹39,600 | 100 ₹22,000 |
| 9.00 | S&F steel window with side hung glazed shutters with box type frame, including projecting type hinges with steel handle, steel peg stay, complete with glazing bars dovetailed or welded, including holdfasts fixed in wall of existing opening complete all as specified and directed | 50 | Sqm | 4,000 ₹2,00,000 | 4,200 ₹2,10,000 | 5,000 ₹2,50,000 | 4,500 ₹2,25,000 | 5,000 ₹2,50,000 | 3,200 ₹1,60,000 Lowest | 4,500 ₹2,25,000 | 3,500 ₹1,75,000 |
| 10.00 | S&F sheet plain glass 4 mm thick, ordinary quality, in squares not exceeding 0.5 Square Metre for each pane, glazing with oil putty or beading including hacking out old broken glass (any thickness, size, quality and description) complete all as specified and directed | 45 | Sqm | 650 ₹29,250 | 600 ₹27,000 | 450 ₹20,250 Lowest | 500 ₹22,500 | 700 ₹31,500 | 700 ₹31,500 | 765 ₹34,425 | 800 ₹36,000 |
Tender Value
₹44.4 L
EMD Value
₹89,000
Closing Date
23 Aug 2025, 6:00 pmClosed
GE AF Sambra
GE AF Sambra ATS Sambra Belgaum 591124
ADDN / ALTN TO BUILDING NO P-1 AND TUBULAR SHED (02 JOBS) AT AFS UNDER GE(AF) SAMBRA
2025_MES_722634_1
GE(AF)/SAM/TOK-26 OF 2025-26
Open Tender
Civil Works
Item Rate
180 days
GE AF Sambra
Please refer Tender documents
9 documents required · 9 mandatory
₹500
GE AF Sambra
₹89,000
Yes
22 Sept 2025
25 Jul 2025
30 Aug 2025
25 Jul 2025
23 Aug 2025
11 Aug 2025
Amount
Demolition of cement concrete (unreinforced) in ground floor and pavings n exc 15cm thickness below or above ground level all as specified and removing rubbish off the premises complete all as specified and directed.
M&L for 25mm thick plain cement concrete 1:2:4, type B0 (using 12.5 mm graded stone aggregates) as in sub-floors, sub-bases, floors and pavings complete all as specified and directed
M&L for machine cut Kota stone slab flooring 20mm to 25mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing with beeswax polish laid over and including 20mm screed bed in cement mortar 1:4 complete all as specified and directed.
M&L for machine cut Kota stone slab 20mm to 25mm thick in riser of steps, skirting, dado and pillar laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing with beeswax polish laid over and including 10mm thick backing coat in cement mortar 1:3, complete all as specified and directed.
M&L for roughening surface of old concrete floor by picking, sweeping clean and washing down with water to remove dust and brushing with neat cement slurry @ 3Kg of cement per Sq metre including removing existing tarfelting complete all as specified and directed.
M&L for plain cement concrete, 75mm thick, 1:3:6, type C-1 (using 20mm nominal size crushed and graded stone aggregates) for plinth protection including filling of expansion joint with bituminous mixture finished fair and even complete all as specified and directed.
Taking down chowkats or frames not exc 1.5 sqm each (without taking of shutters from the frame) complete all as specified and directed.
M&L for cutting holes in stone masonry wall built in cement mortar for inserting hold fasts exc half brick but not exc full brick wall from the face of jambs and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4, type B1 (using 20mm graded crushed stone aggregates) complete all as specified & directed.
S&F steel window with side hung glazed shutters with box type frame, including projecting type hinges with steel handle, steel peg stay, complete with glazing bars dovetailed or welded, including holdfasts fixed in wall of existing opening complete all as specified and directed
S&F sheet plain glass 4 mm thick, ordinary quality, in squares not exceeding 0.5 Square Metre for each pane, glazing with oil putty or beading including hacking out old broken glass (any thickness, size, quality and description) complete all as specified and directed
S&F expanded metal, cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel members complete all as specified and directed
S&F window guard bars welded to steel frame conforming to Fe-290, Gde E-165 complete all as specified and directed
S&F flat iron fillet of Fe-410, Gde-E-250 for securing wire mesh complete all as specified and directed
M&L for preparation of new or previously untreated steel surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide Zinc chromate primer complete all as specified and directed
S&F Aluminium sliding windows shutters powder coated (minimum thickness of powder coating 50 micron) including powder coated main frame, three track (two for glazed and one for wire mesh) without sash bars including necessary jointing cleats, glazing clips, EPDM rubber packing, powder coated aluminium snap beading, screws, wheels, locking arrangments, suitable handles for sliding purpose, 4mm thick plain glass and stainless steel wire mesh of dia 0.36mm and 1.40mm width of aperature, silicon chemical filling at gaps between section frame and wall surfaces including powder coated aluminium grill (not less than 1.5Kg/Sqm) fixed to frame with channel complete all as specified and directed with the following sections of sliding window :- (a) Main Frame bottom section : Make:Jindal section No 20620 or equivalent make as specified in list of makes of Particular Specifications (b) Main Frame top & sides section : Make:Jindal section No 206218 or equivalent make as specified in list of makes of Particular Specifications (c) Sliding shutter section (handle ) : Make:Jindal section No 20738 or equivalent make as specified in list of makes of Particular Specifications (d) Sliding shutter section for top & bottom : Make:Jindal section No 20736 or equivalent make as specified in list of makes of Particular Specifications (e) Sliding shutter section for interlock : Make:Jindal section No 20737 or equivalent make as specified in list of makes of Particular Specifications
S&F Aluminium ventilator louvers type (up and down) with frame and aluminium section powder coated (minimum thickness of powder coating 50 micron) and 4mm thk frosted glass panes, without sash bars, aluminium sections of not less than 1.50mm thick including necessary joining cleats, glazing clips, EPDM rubber packing, snap beading, screws, etc., complete all as specified & directed.
S&F figured glass, pin head type 4 mm thick, not exceeding 0.5 Square metre for each pane, glazing with oil putty or aluminium beading complete all as specified & directed.
S&F sheet plain glass 5.5 mm thick, ordinary quality, in squares not exceeding 0.5 Square Metre for each pane, glazing with oil putty or aluminium beading complete all as specified & directed.
Taking down cement plaster including racking out joint hacking for key scrubbing down with water complete all as specified & directed.
S&F GI wire netting 0.90mm dia and 12mm mesh lathing to wood or metal studding, joists, masonry walls, ceilings, stanchions, beams, etc. including all laps, cutting and waste complete all as specified & directed.
M&L for rendering 15 mm thick on fair face of concrete surface in CM 1:6 for wall finished even & smooth without using extra cement complete all as specified & directed.
M&L for 15 mm thick cement plaster on fair face of brick work or concrete surface in CM 1:4 for wall finished even & smooth without using extra cement complete all as specified & directed.
M&L for applying two coats of acrylic emulsion paint of Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives over and including priming coat of exterior primer applied on new plastered / old painted surfaces of walls complete all as specified & directed.
M&L for preparation of new plastered surfaces of walls and applying three coats of white wash complete all as specified and directed.
M&L for two coats of oil bound distemper over a coat of primer on walls, pillasters, cornices, etc., on newly plastered walls including preparation of surfaces complete all as specified & directed.
M&L for forming mortice holes 20mm to 30mm dia in Kota stone or cement concrete, exc 50 cu cm but not exc 100 cu cm for rag- bolts and grouting with cement mortar 1:2 after fixing of bolts complete all as specified and directed
S&F mild steel rag or lewis bolts 12mm dia, screwed one end with hexagonal or square nuts and washers, the others end enlarged and jagged or lewised, length of bolt exc 15cm but not exc 30cm long complete all as specified and directed.
Surface excavation not exceeding 30 cm deep and averaging 27cm deep and getting out in hard and dense soil complete all as specified & directed.
M&L for broken stone or boulders for hardcore gauge not exc 63 mm, deposited spread and levelled in layers not exc 15 cm thick, watered and rammed to true surface complete all as specified & directed.
M&L for 75mm thick plain cement concrete 1:4:8, type D2 (using 40mm graded crushed stone aggregates) as in sub base under floor complete all as specified and directed.
M&L for 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drives ways or light traffic parking etc., of required strength thickness and size/shape, made by table vibratory method using laid over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/laying of interlocking paver blocks in to the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified & directed.
M&L for plain cement concrete 1:2:4, type C1 (using 20mm graded crushed stone aggregates) as in coping including weathering slightly rounded or chamfered angles and throating and including necessary use and waste of form work complete all as specified & directed.
M&L for preparing old decorated ceilings surfaces and applying two coat of white wash complete all as specified and directed.
M&L for preparing old decorated wall surfaces and applying two coat of white wash complete all as specified and directed.
M&L for complete removal of existing treatment/new plastered surface of walls by scrapping, rubbing down, washing and applying two coats of oil bound distemper on walls over a coat of alkali-resistant priming paints over 1mm thick wall care putty complete all as specified and directed
M&L for one coats of synthetic enamel paint on old wooden surfaces of any description over 10cm width or girth including necessary preparation of surface complete all as specified & directed.
M&L for one coat of synthetic enamel paint on old painted steel surfaces of any description over 10cm width or girth including necessary preparation of surface complete all as specified & directed.
S&F Anodised aluminium powder coated frame for doors, windows, ventilators and partition with one or more rebates including jointing cleat for fixing etc. complete all as specified and directed.
S&F Anodised aluminium powder coated door shutters, aluminium sections weighing 0.55 kg/m including necessary jointing cleats, glazing clips, rubber neoprene packing, anodised aluminium powder coated snap beading, screws, handle 2 Nos in each door, hinges complete all as specified and directed.
M&L for 12mm thick prelaminated particle board, interior grade, prelaminated both sides with coloured plain laminations fixed with screws/clips to aluminium frame work in any position complete all as specified and directed,
S&F brass mortice lock, vertical type, size 100mm, 4 levers complete all as specified and directed
S&F stainless steel hooks 50mm length with SS plate fixed to wall for cloth hanger complete all as specified and directed
Dismantling wall floor hearth tiling including cement mortar bedding (but not backing) complete all as specified & directed.
M&L for non-skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tiles exceeding 0.06 sqm but not exc 0.11 sqm as in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of tiles laid over and including 15mm thick screed bed in CM (1:6) complete all as specified and directed.
M & L for coloured glazed ceramic tiles in vertical surface 450 x 350 x 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including 10 cm thick backing with CM(1:4) complete all as specified and directed.
M&L for vitrified ceramic coloured tiles (double charged) 10mm thick (square or rectangular), polished, area of each tile not exc 0.36 sqm, set and jointed in neat cement slurry and pointed in white or coloured cement to match, as in floors laid over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified & directed.
M&L for vitrified ceramic coloured tiles (double charged) 10mm thick (square or rectangular), polished, area of each tile not exc 0.36 sqm, set and jointed in neat cement slurry and pointed in white or coloured cement to match, on vertical surfaces as in skirting over and including 10mm thick backing coat in cement mortar 1:3 complete all as specified & directed.
S&F factory made single extruded WPC (Wood Polymer Composite) solid door Frames/Chowkhat of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate andnatural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete all as specified & directed. Note: For WPC solid door frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.
S&F factory made single extruded WPC (Wood Polymer Composite) solid plain type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicityindex of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws complete all as specified & directed.
S&F 100 mm long butt hinges stainless steel to door frame with necessary screwing or bolting complete all as specified & directed.
S&F 150 mm long aluminium anodised handle fabricated type complete all as specified & directed.
S&F 150 mm long aluminium anodised barrel tower bolt complete all as specified & directed.
S&F 300 mm Aluminium alloy, anodised sliding door bolt with hasp and stapple bolt type complete all as specified & directed..
S&F in repairs vitreous China wash down water closet pan (Pedestal pattern) with 'P' or 'S' trap, white, including provision of fixing bolts and connecting up to drain and flushing pipe, seat cover, etc., complete all as specified and directed.
S&F in repairs vitreous China squatting pan Orissa pattern of size 580mm x 440 mm white with integral foot rest and 'P' or 'S' trap, including lime concrete bedding complete all as specified and directed
S&F in repairs vitreous China urinal half stall type with grating and union for discharge pipe, fixing plug and waste pipe bedding urinal against wall in CM 1:2 securing urinal to plugs with and including 60mm long brass screw, pointing around urinal back in cement mortar complete all as specified and directed
S&F in repairs wash hand basin, vitreous China, white, flat back, 550mm x 400mm including provision of CI brackets, cutting for and pinning in ends of brackets or erecting stand, excluding provision of CP waste coupling and PVC flexible waste pipe complete all as specified and directed
S&F in repairs PVC low level flushing cistern complete with syphonic action type 10 Ltr capacity including flange valve handle, bracket, PVC flush down pipe with bend complete all as specified and directed
S&F in repairs 15mm dia bib taps, fancy type, brass chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe complete all as specified and directed
S&F in repairs 15 mm dia Pillar taps, fancy type brass, chromium plated with capstan heads, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and directed
S&F in repairs 15mm dia CP angle stop valve high pressure screwed for iron/PVC pipe complete all as specified and directed.
S&F in repairs PVC connection 15 mm dia with PTMT nut of length 450 mm complete all as specified and directed
S&F in repairs Health faucet mild steel chromium plated suitable for 15mm dia pipe with 1.25 metre flexible tube with wall hook fixed all as specified and directed.
S&F in repairs CP Urinal spreader for fixing with 15mm dia pipe complete all as specified and directed
S&F in repairs tubular brass chromium plated towel rail 20mm dia 600mm long between flanges complete all as specified and directed
S&F in repairs PVC SWR pipe 75 mm bore, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.
S&F in repairs PVC SWR pipe 110 mm bore, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.
S&F in repairs 75mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.
S&F 75 mm dia PVC (SWR) bend of any radius complete all as specified and directed
S&F 110 mm dia PVC (SWR) bend of any radius complete all as specified and directed
S&F 75mm dia PVC (SWR) junction single, (single T) equal or unequal with access door complete all as specified and directed
S&F 110 mm dia PVC (SWR) junction single, (single T) equal or unequal with access door complete all as specified and directed
S&F in repairs 75 mm dia PVC (SWR) bend with oval access door complete all as specified and directed
S&F in repairs 110 mm dia PVC (SWR) bend with oval access door complete all as specified and directed
Taking up or down 15 mm bore GI/PPR/PVC tubing and connections along with fittings such as tees , bends etc fixed to walls and ceilings or laid in floors/ trenches complete all as specified and directed
Taking up or down 25mm bore GI/PPR/PVC tubing and connections along with fittings such as tees , bends etc fixed to walls and ceilings or laid in floors/ trenches complete all as specified and directed
S&F Unplasticised PVC pipes of pressure rating 10 kgf/Sqcm fixed complete to walls, ceilings or in floors any type of pipe including fitting such as bends,elbows, unions, tees, reducing tees, adopters, sockets, plugs, hose clips, brass fittings etc for 15mm dia complete all as specified and directed
S&F Unplasticised PVC pipes of pressure rating 10 kgf/Sqcm fixed complete to walls, ceilings or in floors any type of pipe including fitting such as bends,elbows, unions, tees, reducing tees, adopters, sockets, plugs, hose clips, brass fittings etc for 25mm dia complete all as specified and directed
S&F two way 15mm dia chromium plated bib cock with wall flange screwed for iron pipe/CPVC/UPVC or for brass ferrule and fixed complete all as specified and directed
Excavation in trenches n. exc. 1.50m wide and not exc 1.5 m in depth; not exc 10 sqm on plan and not exc 1.5m in depth and getting out in hard/dense soil complete all as specified and directed
M & L for PCC 1:4:8, type D-2 (using 40mm graded stone aggregates) as in foundations complete all as specified and directed
M&L for form work to sides of column footings, plinth beams (sides and soffits) etc with rough finished surfaces of concrete flat complete all as specified and directed
M & L for formwork to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and directed
M & L for TMT bars for reinforcement 10mm dia and over cut to lengths, bent to shape required including cranking, bending etc and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed
M & L for TMT bars for reinforcement 5mm and over upto and including 10mm dia TMT bars in stirrups, spaces and binders complete all as specified and directed
M&L for reinforced cement concrete M-25 design mix (using 20mm graded crushed stone aggregates ) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed
M&L for reinforced cement concrete M-25 design mix (using 20mm graded crushed stone aggregates ) as in columns, pillars, piers, posts and struts complete all as specified and directed
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm thick complete all as specified and directed
M&L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in CM 1:4 finished even and smooth without using extra cement complete all as specified and directed
M & L for 3mm thick ACP Cladding in wall / faces of cloumn laid over frame work complete all as specified and directed
M&L for steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed
S & F pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed
Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendents, regulators, sockets, light fittings etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc., complete all as specified and directed
Taking down carefully unserviceable main switches/DB's/Metal socket off size including MCBs from their position and removing materials from site complete all as specified and directed
M&L for point wiring for the following with stranded FRLSH copper conductor cable, 1100 volts grade (ISI marked) PVC insulated and unsheathed of size 1.5 Sqmm single core in and including new non-metallic rigid PVC concealed conduit, not less than 20 mm dia, medium duty ISI marked, including conduit fittings such as tees, bends etc terminating in and including modular METAL FLUSH BOX ,modular white cover plate any size with support frame any size module complete all as specified and as directed. cover of approved make, for one fan or light or exhaust fan or bell/buzzer point controlled by one switch including provision of 1.5 Sqmm PVC insulated unsheathed copper conductor cable, multi stranded as earth wire to common earth & connecting to earth dolly complete all as specified and directed:-
One light point controlled by one, one way switch 5 Amp
One light point controlled socket point on the same board with other switches
One light point controlled socket point on indpendent board
One bell point controlled by one, one way switch 5 Amp
All as per Srl item No.97 above but one 3 pin socket outlet 15 Amps independent board with cable 4 Sqmm size
S&F switch modular type single pole 6 Amps One Way Switch AC 230V, 50HZ supply complete all as specified and as directed. Make : Cat Part No. 800100 of Indo Aisian ELVIRA make/ACWSXXW101 of Havells CRABTREE(Signia) make or any other equivalent make as specified in list of maks of Particular Specifications as approved by GE.
S&F switch modular type single pole 16 Amps One Way Switch with indicator AC 230V, 50HZ supply complete all as specified and as directed. Make : Cat Part No. 800105 of Indo Aisian ELVIRA make/ACWSXIW161 of Havells CRABTREE(Signia) make or any other equivalent make as specified in list of maks of Particular Specifications as approved by GE.
S&F modular socket 5A AC 230V, 50HZ complete all as specified and as directed. Make : Cat Part No. 802800 of Indo Aisian ELVIRA make/ACWKPXW063 of Havells CRABTREE(Signia) make or any other equivalent make as specified in list of maks of Particular Specifications as approved by GE.
S&F modular type switch combine 6A/16A multi purpose AC 230CV, 50Hz complete all as specified and directed Make : Cat Part No. 800122 of Indo Aisian ELVIRA make/ACWKCXW163 of Havells CRABTREE(Signia) make or any other equivalent make as specified in list of maks of Particular Specifications as approved by GE.
M&L for ceiling rose surface backelite three terminal 240 volts complete all as specified
S&F modular fan step regulator, 120W - 2 module complete all as specified and as directed. Make : Cat Part No. 800139 of Indo Aisian ELVIRA make/ACWRFHW008 of Havells CRABTREE(Signia) make or any other equivalent make as specified in list of maks of Particular Specifications as approved by GE.
S&F in replacement LED lights fitting 1x 20W, 220V, wall mounted LED batten with Aluminum Housing & integrated electronic driver including connecting up with 0.5 Sqmm three core flexible copper conductor cable from ceiling rose complete all as specified and as directed. Make:-Cat Part No: LUMILINE+BS20WLED830SPCSSIND of Havells make or any other equivalent make as specified in list of maks of Particular Specifications as approved by GE.
S&F in replacement LED lights fitting 1x 10W, 220V, wall mounted LED batten with Aluminum Housing & integrated electronic driver including connecting up with 0.5 Sqmm three core flexible copper conductor cable from ceiling rose complete all as specified and as directed. Make:-Cat Part No: LUMILINE+BS10WLED865SPCSS of Havells make or any other equivalent make as specified in list of maks of Particular Specifications as approved by GE.
S&F in replacement ENDURA SUN DOWN energy saving and environmental friendly long life LED street light made of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having IP66 protection and impact resistance of IK08 LED street light of 35 Watts with sutable size bracket made to shape of 40 mm dia GI pipe medium grade of 1.4 mtr length including MS clamps 25 x 4 mm - 02 Nos with nut bolts washers complete all as specified and directed. Make:- Havells Cat Part No - ENDURASUNDOWNSL35WLED765PASYBOPC of Havells make or any other equivalent make as specified in list of maks of Particular Specifications as approved by GE.
S&F in replacement sub main wiring in and including PVC concealed conduit min 25 mm dia with 2 single core 06 sqmm frlsh multi-stranded PVC insulated cable unsheathed 1100 volts grade with one earth wire of 06 sqmm copper conductor cable connected to common earth dolly complete and including PVC concealed conduit complete all as specified and as directed. Note:- Two run of 6 Sqmm and one run of 6 Sqmm will be measured as 1 RM.
S&F in replacement sheet metal enclosure double door factory made distribution board 240 volts SPN 8 way, 200 Amps rated bus bar complete all as specified and as directed.
S&F in replacement sheet metal enclosure double door factory made distribution board 240 volts SPN 12 way, 200 Amps rated bus bar complete all as specified and as directed.
Taking down and re-fixing LED light fitting 1x16 Watt flame proof including connecting up with three core flexible copper conductor cable with suitable size complete all as specified and directed
S&F LED light fitting 1x16 Watts flame proof, CMRI certified recommended for gas/ vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminum housing with heat resistant toughened glass with LED tube light fixtures driver, holders, connector, etc., complete with all accessories prewired and including connecting up with three core flexible copper conductorcable with suitable size complete all as specified and directed
S&F in replacement sheet metal enclosure Double Door factory made distribution board 415 voltsVTPN 8 way, 250 Amps rated bus bar complete all as specified and as directed.
S&F in replacement MCB SPN 6 to 32 Amps, C Curve, 240 volts, 50 Hz AC supply complete all as specified and directed.
S&F in replacement MCB SP 6 to 32 Amps, C Curve, 240 volts, 50 Hz AC supply complete all as specified and directed.
S&F in replacement MCCB 3 Pole 125 Amps, 16 KA, 415VOLT, 50 Hz AC supply complete all as specified and directed.
Taking down ceilng fan, dismantling blades, painting of ceiling fans complete in situ with synthetic enamel paint by spraying including filling cavities with filler one coat after cleaning all dust etc and refixing ceiling fan and connecting up including provision of 0.5 Sqmm, 3 core cable from ceiling rose to connector of fan complete all as specified and directed.
S&F exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers including cutting the wall as round shape for exhasut the air complete all as specified and directed.
M&L for earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6mm thick, buried directly in ground (earth pit not less than 2.25 metre depth below normal ground level) with top edge of plate at a depth not less than 1.5 mtr below ground level, the earth electrode surrounded by adequate quantity of charcoal dust and salt to a packed thickness of 15 cm on all sides, connected to galvanized earth wire 4mm dia with and including bolts, nuts, check nuts and washers of galvanised iron or steel and riveted to earth plate and one end and connecting to main switch board or metallic bodies of HT/LT equipments etc at the other end, GI wire encased in and including 15 mm bore GI light grade pipe with all fittings, from top of electrode to body of equipment fixed with and including flatiron clamps, bolts, nuts and washer and also including providing watering pipe 20mm bore GI light grade and including funnel, wire mesh, copper lugs etc from bottom of earth pit to top of electrode complete with earth pit in PCC 1:3:6 type C-2 using 40 mm graded crushed stone aggregate and CI cover complete all specified and shown in electrical plate No 03 of SSR Pt-I connecting earth electrode to test point with and including earthing lead including neessary excavation and earthwork in any type of soil, returning, filling in approved soil and disposal of surplus soil to a distance n.exc 50m from staring point including removal of old earthing complete all as specified and as directed. Note:- PCC chamber shall be constructed at least 1.5 m away from the earth electrode and pipe for watering shall be provided in slanting maner . The rate quoted shall be deemed to include for all the above provision.
S&F in replacement bell ding dong AC single pole 230 Volts complete all as specified and directed
S&F in replacement modular bell push 6A 1 module type single pole 5 Amps complete all as specified and directed
S&F in replacement single pole and neutral enclosure with two pin and earth plug and socket complete with one single pole MCB 10 Amp complete all as specified and directed
M&L for point wiring with stranded FRLSH copper conductor cable, 1100 volts grade (ISI marked) insulated and unsheathed of size 1.5 Sqmm single core in and including new metallic rigid steel concealed conduit, not less than 20 mm dia, medium grade ISI marked, including conduit fittings such as tees, bends etc terminating in and including modular METAL FLUSH BOX ,modular white cover plate any size with support frame any size module complete all as specified and as directed. cover of approved make, for one fan or light or exhaust fan or bell/buzzer point controlled by one switch including provision of 1.5 Sqmm PVC insulated unsheathed copper conductor cable, multi stranded as earth wire to common earth & connecting to earth dolly complete all as specified and directed
S&F Switch flame proof rotary type with termination box in LM6, 6amp/16A, single pole 250 V complete all as specified and directed
S&F FLAMEPROOF WALL MOUNTING FAN, steel body AC single Phase. 230V of size 600 mm sweep with, blades, including cutting the wall as round shape for wall fan complete all as specified and directed
S&F 1X20 Watts LED tube light fitting complete specially designed direct-indirect transparent optical system which provides sufficient light levels on work plane and at the same time illuminating the ceiling with a harmonious and pleasant appearance complete all as specified and directed. Make:-Havells Cat Part No.CONSTA1144LP20WLED830SPCWH or any other equivalent make as specified in list of maks of Particular Specifications as approved by GE.
M&L for earthing to panel / equipments / panels etc with & including galvanised mild steel earth plate electrode of size 60 cm x 60 cm x 6 mm thick buried vertically in ground (earth pit not less than 2.25 m below normal ground level) with top edge of the earth plate at a depth not less than 1.5 m below ground level, the earth electrode surrounded by adequate quantity of charcoal dust and salt to a packed thickness of 15 cm on all sides, connected to & including galvanized mild steel strip 32x6 mm as earth lead, including nuts, bolts, check nuts & washers of galvanized iron or steel and riveted/welded to earth plate at one end and other end of strip connected to Panel / equipment body / test point with two Nos nuts bolts or welding with steel structure, GI earth strip encased in and including 40mm bore GI light grade pipe with all fittings from upper edges of earth plate upto 7.5 metre above ground level fixed with and including 25x3mm flat iron clamps, bolts, nuts and washer and also including providing watering pipe 20mm bore GI pipe medium grade from earth pit to top of electrode and including funnel, wire mesh, copper lugs etc complete with earth pit in PCC 1:3:6 type C1 using 20mm graded crushed stone aggregate and 40mm thick RCC (1:2:4 type B1) cover complete all as specified and shown in electrical plate No 3 of SSR Part-I including necessary excavation and earthwork in any type of soil, returning, filling in approved soil and disposal of surplus soil to a distance not exc 50m from starting point including removal of old earthing complete all as specified and as directed. Note : PCC chamber shall be constructed at least 1.5 mtr away from the earth electrode and pipe for watering shall be provided in slanting manner. The rate quoted shall be deemed to include for all the above provision.
M/s PRATAP VIJAYSINGHRAO DESAI (BID ID -3403126)
RAJENDRA KRISHNA SARAF (BID ID -3395935)
M/S MAHADEV M PATIL (BID ID -3395553)
Vinod Enterprises (BID ID -3397682)
M/s B C CHOUGULE (BID ID -3395829)
Peerzada And Sons (BID ID -3395782)
M/S ADITYA CONSTRUCTIONS (BID ID -3396155)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .