Supply of Furniture for classrooms at PG and Research Building at NLIU Bhopal

Amount

Supply of Furniture for Classrooms at PG and Research Building at NLIU, Bhopal.

Providing And Placing of Training room chair with Desklet & Arms: SEAT / BACK: The seat sub assembly is made up of 1.2 ± 0.1cm thk Plywood measured as per QA method described in OCP-QLTA-P14 18 upholstered with moulded foam and polyester fabric and covered with an injection-moulded polypropylene outer cover. The seat can tip-up when not in use and this feature can be used while, cking the chairs horizontally. The back sub-assembly is made up of injection-moulded, inner upholstered with moulded foam and polyester fabric and covered with an injection-moulded polypropylene outer cover. The contoured back with width extension at the bottom area is designed to give comfort to lower back. The back flexing features allows the back to tilt by 9°±2° to aid the user in adopting a comfortable reclining posture. Both these sub-assemblies are fixed to the tubular structure. BACK SIZE: 45 .2cm (W) X 44.6cm (H) SEAT SIZE: ,47.0cm (W) X 50.0cm (D) TUBULAR FRAME STRUCTURE: The powder-coated 4 leg structure is made of 2.2 ±0.03cm dia x 0.25 ±0.02cm thk M.S. E.R,W. Tube front and rear leg welded along with connecting tube made of 1.9 ±0.02cm dia x 0.2 ±0.016cA1 thk` M.S. E.R.W. Tube to form the tubular frame assembly. The legs are provided with injection-moulded adopter bush in black Nylon and brake-loaded castors enabling easy maneuvering while not in use and stable sitting while in use. The chairs can be stacked horizontally when not in use. HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam is moulded with density = 70 ±8 kg/m3 and Hardness load for Seat 16 ± 2 kgf and Hardness load for back 12 ± 2 kgf as per IS:7888 for 25% compression. ARMRESTS : The armrest structure is made up of 2.2 ±0.03cm dia x 0.25 ±0.02cm thk M.S. E.R.W. Tube welded to the Tubular Frame structure and having a scratch-resistant ABS Arm top. FULL DESKLET: The Full Desklet assembly is Flip-up type and is made up of extension tube of 1.9 ±0.02cm dia x 0.2 ±0.016cm thk M.S. E.R.W. Tube and a support tube on L.H. side of 1.6 ±0.02cm dia x 0.2 ±0.016cm thk M.S. E.R.W. Tube on which an scratch resistant ABS desklet top is fixed and covered on bottom side with a bottom cover. BRAKE-LOADED CASTORS: The brake-loaded castors are assembled to the chair legs, to give a free movement for maneuvering the chair when not in use and it will brake the movement when load is applied (while in use) to give a stable feel. The twin wheel castors are injection molded in black Polypropylene. TWIN WHEEL CASTORS: The twin wheel castors are injection moulded in Black Nylon +30% GF.

Providing And Placing of Relax Training Room Chair with Full Desklet : SEAT / BACK ASSEMBLY: The Seat is injection moulded in glass filled Polypropylene compound which is upholstered with fabric upholstery covers and moulded Polyurethane foam. The Back is injection moulded in glass filled Polypropylene compound which is upholstered with Mesh fabric. SEATSIZE:50.0cm.(W)x48.0cm.(D), BACK SIZE : 53.0 cm. (W) x 39.0cm. (H). HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR Polyurethane seat foam is moulded with density 45±2 kg/m³ and hardness 16±2 kgf as per IS:7888 for25% compression. M.S. POWDER COATED FRAMES FOR 4 LEG CHAIRS: The powder coated (DFT 50 ± 10 microns) welded tubular main frame is made from Ø2.54±0.03cm x 0.2±0.016cm and Ø1.6±0.3 mm x 0.16 ± 0.0128cm M.S. E.R.W tube. The Ø1.9 ±0.3mm x 0.12 ±0.0096 cm M.S.E.R.W. tube used as connecting member between LH & RH frames. Desklet support frame is made from Ø2.22±0.03 cm x 0.16 ± 0.0128 cm and welded to main frame. SHOE: The shoes are made of glass filled Polypropylene compound with and pressed fitted with tubular frame. Felt is provided below the shoes. ARMREST: The Armrest are made of glass filled Polypropylene compound and assembled over the tubular frame. FULL DESKLET: The Full desklet is made of 1.3 ±0.02cm. thk. compact laminate board. Desklet has Front and back adjustment of 4.0cm ± 0.5 cm. Outer Dimensions: 59.5 ±0.1cm.(W) X 29.0±0.1cm.(D).

BONTON TECHNOMAKE PRIVATE LIMITED (BID ID -1277569)

NADIR TRADERS (BID ID -1277641)

RELIABLE OFFICE SOLUTIONS (BID ID -1277777)