Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
Tender Value
₹19.8 L
EMD Value
₹20,000
Closing Date
27 Jun 2023, 3:00 pmClosed
Block Development Officer
Block Development Officer Kaveripakkam Block Ranipet District. 604001.
Construction of 60000 Litres Capacity OHT Tank of 12m Staging height at Athipattu Colony H/O Athipattu Panchayat in Kaveripakkam Block, Ranipet District
2023_RDTN_328798_1
A2/663/2023/Date 9.6.2023
Open Tender
Civil Works
Works
90 days
Kaveripakkam Block
Please refer Tender documents.
3 documents required · 3 mandatory
₹0
₹20,000
30 Jun 2023
17 Jun 2023
27 Jun 2023
17 Jun 2023
27 Jun 2023
17 Jun 2023
Amount
Kaveripakkam Block
1.Construction of 60000Litres Capacity OHT Tank of 12m Staging height at Athipattu Colony H/O Athipattu Panchayat in Kaveripakkam Block, Ranpet District
Earth work excavation for foundation in all classes of soils and sub soil to full depth except in hard rock requiring blasting but inclusive of shoring strutting if required for the sides of foundation.
Cement Concrete 1:4:8 mix using 40 mm HBG metal for foundaion including watering wherever necessary and laid in layers of not more than 15cm thick. Compacting etc., complete complying with standard specifications and as directed by the departmental officers etc, complete.
RCC 1:11/2:3 using 20mm HBG Metal excluding cost of reinforcement, centering, shuttering strutting, but including cost of mixing concrete, placing, vibrating with mechanical vibrator, finishing
Below 1.50m from GL
Upto GL
Above Gl and Upto 4.50m Height
Above 4.50m and upto 7.32m Ht from GL
Above 7.32m and upto 10.98m Ht from GL
Above 10.98m and upto 14.64m ht form GL
Above 14.64m and upto 18.30m ht form GL
Provinding steel centering using MS plates of size 90cmx60cm 13 grade to 10 grade thick welded with 25mmx25mmx3mm MS angles supported with country wood stantling of size 10cmx6.5cm at 90 cm C/C strutting with casurina props of 100m to 13cm dia as directed by Board Officers.
SQARE Surface
Columns below GL and above GL upto 3.30m ht
Columns above 3.30m upto 4.30m ht from GL
Columns above 4.30m upto 5.30m ht from GL
Columns above 5.30m upto 6.30m ht from GL
Columns above 6.30m upto 7.30m ht from GL
Columns above 7.30m upto 8.30m ht from GL
Columns above 8.30m upto 9.30m ht from GL
Columns above 9.30m upto 10.30m ht from GL
Columns above 10.30m upto 11.30m ht from GL
Columns above 11.30m upto 11.40m ht from GL
Plane Surface
Below G.L and upto 3.30m ht above GL
From 5.30m to 6.30m htabove GL
From 8.30m to 9.30m ht above GL
From 11.30m to 12.30m ht above GL
Curved Surface
Upto 3.30m height (From Floor Slab)
From 3.30m to 4.30m Height (From Floor Slab)
Supplying, fabricating and placing in position of HSD steel rods for reinforcement including the cost of steel and binding wire etc., complete and as directed by Board officers.
Painting two coats using approved quality Cement Paint over one cost of priming coat exposed surface of the Reservoir including cleaning, preparing the surface and curing etc., complete and as directed by Board officers.
Supplying and Fixing in Position of Cut Stone set in Cm 1:3 using well dressed cut stone supporting inlet pipe inside the tank and as directed by the officers
Provision for pipe connection arrangements for inlet outlet, scour and overflow etc., includeing cost of pipes, specials, valve, labour charge for lifting, aligning, cutting, threading, fixing and painting of GI pipes with two coats of approved quality enamel paint etc., complete as detailed below.
For Inlet Arrangements
80mm GI Pipes
80mm GI Coupling
80mm GI Bend
80mm GI Flange Set
90mm PVC Threaded Coupler
80mm GM Gate Valve
For Outlet Arrangements
65mm GI Pipes
65mm GI Coupling
65mm GI Bend
65mm GI Flange Set
65mm GM Gate Valve
90mmx 80mm PVC Threaded Coupler
90mm x 63mm PVC Reducer
For Source Arrangemets
65mm GI Pipes
65mm GI Coupling
65mm GI Bend
65mm GI Flange Set
90mmX63mm PVC Threaded Coupler
For over flow Arrangemets
65mm GI Pipes
65mm GI Coupling
65mm GI Bend
65mm GI Flange Set
90mmX80mm PVC Threaded Coupler
Rubber Sheet
Bolt and Nuts
80mm Gi Pipe -Cutting
80mm Gi Pipe -Threading
Fabrication,supply, delivery and fixing of outside MS ladder of 45cm wide made out of 50x50x6m MS angle for sides and steps in 16mm MS plain rods fixed at 30cm centre to centre welded, jointed etc., providing with suitable side supports, clamps, and locking arrangements provided with one coat of red oxide paint for providing access to roof top of 10,000 lit. capacity OHT of suitable inclined length, including bottom anchorage and transportation and as directed by Board officers.
Supply and delivery and fixing position of CI man hole cover and frame of Size 60x60cm on roof slab and as directed by the officers The manhole frame and cover should be of light duty and conforming to ISI 1726/1974
Supply and Delivery and Fixing in Position of 150mm dia AC Ventilators on the roof Slab and as directed by the officers
Refilling the Foundation for Service reservoir with excavated earth (other than sand) in layers of 15cm thick well rammed,watering and consoildating etc Complete complying with standard Specification as directed by the officers
Providing and fixing of RCC inner access ladder in RCC 1:1:5:3 (one cement, one and half sand and three aggregates) using 20mm HBG stone for OHT including cost of reinforcement, placing grill in position, centering shuttering charges, mixing concrete curing etc., to required height and clear width of 45cm consisting of two Nos. of vertical post of 10cm x 15cm and step slab of 25mm x25mm etc., complete and as directed by Board officers.
GST Amount for providing service to Government contract works for the above construction works. { GST amount is the Total GST amount for total overall quoted amount above this row in column "BB" for all works in this package}
nk vasudevan
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .