SPL REPAIR TO BLDG NO P-7, PROVN OF WATER PIPE LINE FROM OPEN WELL FOR ARBORICULTURE AND PROVN OF AIR CONDITIONING SYSTEM FOR OPS ROOM AND SIGNAL EXCHANGE ROOM AT HQ UM AND G AREA AT FORT AREA NAGPUR

Amount

Dismantling of asbestos cement sheet (corrugated, semi-corrugated etc) sheets in roof coverings complete all as specified and directed.

Dismantling mild steel work of any description not otherwise provided for complete all as specified and directed.

Dismantling wall and ceiling boards (Fiber, pulp, insulation etc) or insulation boards, slabs, blankets or of any description in any thickness including cover fillets complete all as specified and directed.

Taking down cement or cement lime plaster, any description on brick or stone wall, etc including raking out joints hacking for key, scrubbing down with water etc complete all as specified and directed.

Taking down door / window frame with shutter of any description (without taking of shutter from the frame) area exc 1.5 sqm but not exc 4.00 Sqm complete all as specified and directed.

Taking down door / window frame with shutter of any description (without taking of shutter from the frame) area not exc 1.5 sqm complete all as specified and directed.

Dismantling of brick work or stone/boulder masonary built in cement mortar including ashlar facing dressed stone and precast concrete articles complete all as specified and directed.

Demolition of Concrete in ground floors and pavings not exc 15 cm thickness (below or above ground level) complete all as specified and directed.

Demolition Reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing selviceable tiles to store and rubbish off the premises complete all as specified and directed.

Excavating in post holes (or similar holes) each not exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, hard/dense soil complete all as specified and directed.

M&L for plain cement concrete in foundation filling type D-2 1:4:8 (using 40mm graded stone aggregate) and mass concrete complete all as specified and directed.

M&L for plain cement concrete in foundation filling type D-2 1:3:6 (using 20mm graded stone aggregate) and mass concrete sub base complete all as specified and directed.

M&L for steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240 complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L for brick with fly ash brick old size straight of curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and as directed.

M&L for 15mm thick rendering CM 1:4 on fair faces of brick work using water proofing compound as per manufacture instruction complete all as specified and directed. Note:- WPC shall be measured separately.

Supply only liquid water proofing admixture of make-pidilite or equivalent complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar 1:6, finished even and smooth without using extra cement complete all as specified and directed.

M&L for TMT bars of 10mm dia and over cut to length, bent to shape required and binding with mild steel wire (annealed) not less than 0.90mm etc complete all as specified and directed.

M&L for TMT bars of 8 to 10mm dia and over cut to length, bent to shape required and binding with mild steel wire (annealed) not less than 0.90mm in stirrups, spacers and binders complete all as specified and directed.

M&L for RCC Reinforced cement concrete (Nominal Mix) 1:1.5:3 typeA1 (using 20mm graded aggregate) as in beams, cantilevers, lintels over 1.5m span complete all as specified and directed.

M&L for vitrified ceramic tiles 10mm thick (square or rectangular) polished, light shed area of each tile not exceeding 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white or colored cement to match over 15mm cement screed bed in cement mortar 1:4 complete all as specified and directed.

M&L vitrified ceramic tiles 10 mm thick (square or rectangular) polished, light shed area of each tile not exceeding 0.36 sqm in Skirting etc set and jointed in neat cement slurry and pointed in site or color cement to match including rendering 10mm thick in cement mortar 1:3 complete all as specified and directed.

S&F Anodized aluminium(powder coated) frame for doors, window, ventilator with one or more rebates including joining cleat for fixing etc complete all as specified and directed.

S&F aluminium (powder coated) door, window, ventilator shutters, partition etc aluminium section weighing 0.55 kg/m including necessary joining cleats glazing clips, ruber neoprene packing. handles 2 Nos in each door, hinges anodised aluminum snap beading screws etc complete all as specified and directed.

S&F for mild steel mortice lock, vertical type, size 100mm 4 lever complete all as specified and directed.

M&L for prelaminated particle board 12mm thick interior grade laminated both side with decorate choice lamination, fixed with screw to timbr frame work in wall complete all as specified and directed.

S&F 4.00mm thick tinted glass fixed with necessary rubber gasket and aluminum beading complete all as specified and directed. (Make:- Modi guard/ Saint Gobin)

S&F aluminium (powder coated) three track sliding window comprising of one fly proof shutter and two glazed shutters with frames of size 92.0mm x 31.75mm x 1.30mm thick and shutter frames of size 40mm x 18mm x 1.55mm thick with necessary joining cleats, glazing clips, rubber gasket, anodised aluminium snap beading and connected locking arrangement and with aluminium (anodised) grill made out of 7mm wide flat, square, rectangular or similar section, fixed with channel of size 38mm x 12mm x 13mm (Section 8778) complete all as per manufacturer's catalogue 7 specifications (Make: Grill No. 20 of 'DECO GRILL' or equivalent) complete all as specified and directed. Notes:- (i) Glass filling in panels of windows and aluminium wire mesh/wire cloth shall be deemed to be included in the quoted rate for the item; (ii) Aluminium alloy wire cloth in panels of wire gauzed shutter shall be 0.45 mm nominal dia of wire and avg width of aperture 1.40 mm, fixed with aluminium wire staples; (iii) Glass filling in panels of glazed shutter shall be 5 mm thick tinted sheet glass of approved make and shade/tint Make of Aluminium Sections powder coated : Jindal or equivalent.

M&L for 4mm thick for non asbestos, fibre cement building board of size 595x595mm size fixed over GI Powder coated snap grid frame work for false ceiling comprising of the following section for making partition of 600x600mm size fixed to wall with wall plug and screw and hanged to roof with 4mm dia GI suspended wire of suitable length and butterfly clip of size of main tee shall be 32mm x 24mm x 0.30mm, cross tee shall be 28mm x 24mm x 0.30mm thick with black lining in mid portion and wall angle shall be 24mm x 24mm x 0.30mm thick complete all as specified and directed.

M&L for 18mm thick plywood, grade BWR, type BB fixed with screws to timber frame work with beading as required complete all as specified and directed.

M&L for 12mm thick plywood, grade BWR, type BB fixed with screws to timber frame work with beading as required complete all as specified and directed.

M&L for 0.90mm thick decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and directed.

S&F 75mm butt hinges, extruded brass, with mild steel hinge pin, bright polished and fixed, complete all as specified and directed.

S&F 75mm brass handles, cast type, polished bright handles for cabinet all as specified and directed.

S&F for brass 2 leaver locks, drawer, cabinet, grade I, size 50mm complete all as specified and directed.

S&F framed work such as grills ,guard bars with mild steel Square bars with ends of bars shouldered and/ or riveted and similar work confirming to FE 290 Gde-E-165 complete all as specified and directed.

M&L for 75mm thick cement concrete type C-2, 1:3:6 (using 40mm graded stone aggregate) finishing cement concrete surface even and smooth without using extra cement as in plinth protection complete all as specified and directed.

M&L for preparation of new steel surfaces of any description over 10cm width or girth & applying two coats of synthetic enamel paint complete all as specified and directed.

M&L for preparation of new surface of wall and applying two coats of oil bound distemper over a coat of birla white care putty complete all as specified and directed.

M&L for complete removal of existing treatment of walls and applying two coats of oil bound distemper over a coat of wall care putty complete all as specified and directed.

M&L for preparing new plastered surface and applying two coats of weather shield paint (apex) over coat of primer complete all as specified and directed.

M&L for complete removal of existing treatment and preparation of surfaces and applying two coats of weather shield paint (apex) over coat of primer complete all as specified and directed.

S&F any height (above floor level) stainless steel (grade 304) hollow round of square pipe of any dia/size fixed as in post/railing with knock-down fixing system & top mounted round, baluster made of 38 to 50mm dia stainless steel grade 304, channel, plate etc includingwelding, grinding,buffing, polishing,and making curvature(wherever requred) and fixing the same with neccesary stainless steel nut and bolt complete.Including fittings railing with necessary acessories & stainless steel dash fastener, stainless steel bolts, etc or required size suitable arrangment as per approval of Engr-in-Charge including taking down old railing and make good the surface as required complete, all as specified and directed. Note: The distance between verticle stainless steel post should as per site requirement center to center.

S&F for 10 to 12mm thick toughened, tinted glass fixed to door, partition or any other location, including bracket, support, handle, lock, bottom macine, and oter accessories as required complete all as specified and directed.

Removing building materials etc (other than spoil payable under items 03028 to 03031 in Section-3 Earthwork) to a distance of up to 5.00KM, beyond the lead included in the rates, including loading, unloading and stacking at the destination complete all as specified and directed.

S&F Harrison rails, mild steel, chromium plated curtain rod with a telescoping brackets to fit both rod and mounting hardware modular type complete all as specified and directed.

S&F high density polyethylene (HDPE) pipes of pressure rating 6kg/sq cm of 50mm dia pipe complete with fixing accessories complete all as specified and directed.

Supply and lowering of 5 HP open well submercible pump, 3 phase, 415 volts, 3.7 KW high efficiency and energy saving design, advance water cooled motor including PVC wire rope 40 RM and suitable DOL starter including connecting items complete all as specified and directed. Make of Pump:- Kirloskar cat No KOS-538

M&L for PVC insulated cable with multistranded copper conductor of size 6 sqmm for submercible pump from LT panel to pump complete all as specified and directed.

Taking down point wiring with aluminum conductor cable of light point fan & socket light & power complete including light fittings any type switches, sockets, ceiling rose, switch boards, bell/ buzzer, bell push, tube light fitting, regulator etc and making good to the disturbed surfaces of walls/ floor etc to match with existing surfaces including white washing/colour washing/ distemper to match with existing wall/ floor/ ceiling finishes complete all as specified and directed.

M&L for point wiring 1100 volt grade single core FRLSH PVC insulated and unsheathed cable with multistranded copper conductor 1.50 sqmm drawn in and including electrical grade PVC conduit not less than 20mm dia with IS 9537 (Part-III) 1983 marked medium grade concealed on surface of wall/ ceiling including FRLSH PVC insulated unsheathed earth wire with multistranded copper conductor of size 1.50 sqmm pressed steel modular boxes sunk on wall for mounting of modular switches, switch sockets, fan regulator etc including modular cover with frame any size complete all as specified and making good disturbed surfaces for one light point controlled by one, one way switch. Note:- Cost of cable provided from sub main DB to respective switch board in rooms shall be included in the quoted point wiring rate. All switches, fan, sockets, ceiling roses and holders shall be connected to common earth dolly.

All as per item No 54 above but one 3 pin 5 amp socket out point on the same board with other switches complete all as specified and directed.

All as per item No 54 above but one 3 pin 5 amps socket out let point on independent board complete all as specified and directed.

All as per item No 54 above but wiring with 2.5 sqmm multi stranded cable and earth wire with copper conductor of size 2.5 sqmm for 15 amps power point complete all as specified and directed.

S&F in replacement modular switch one way 6A, 1 module complete all as specified and directed.

S&F in replacement modular switch one way 16A, 1 module complete all as specified and directed.

S&F in replacement socket outlet, 2/3 pin, 6 amp (with 2 pin outlet of 5 amp also) multipurpose use, non shuttering, non interlocking, flush mounting type, 230/250 volts grade on top covers complete all as specified and directed.

S&F in replacement socket outlet, 2/3 pin, 16 amp (with 3 pin outlet of 5 amp also) multipurpose use, non shuttering, non interlocking, flush mounting type, 230/250 volts grade on top covers complete all as specified and directed.

S&F in replacement step type electronic fan regulator, 120 watt, 2 module complete all as specified and directed.

S&F in replacement ceiling rose surface bakelite 65x50mm three terminals complete all as specified and directed.

S&F in replacement lamp holder angular type PVC/polycarbonate type with cord grip cap suitable for pendent fitting/wall including invertor LED bulb 12W LED lamp complete all as specified and directed. Make:- Syska Cat No SSK-PAG-N 12W or equivalent in CG / Havells / Bajaj / Philips.

S&F in replacement recessed LED luminaires with slim line CRCA sheet metal body and opal diffusar for grid/POP suitable for 600 x 600mm modular ceiling grid and also can be suspended with provided kit with all accessories pre-wired twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed. Make:- Jaquar Cat No LULTSLS036W or equivalent in CG / Havells / Bajaj / Philips.

S&F in replacement building security light LED 25W with Lumen O/P 1800 with driver with rated voltage 240 V, 50Hz, including mounting GI (made out of 25mm dia light grade pipe 1.2m bent two shape including FI clamps nut bolts) etc complete all as specified and directed. Make:- Jaquar Cat No LSRTO4S025W or equivalent in CG / Havells / Bajaj / Philips.

S&F and hanging ceiling fan of 1200mm sweep white colour without regulator and including down rod, fan blade & canopy etc complete and connecting up complete with and including three core flexible PVC insulated multstranded copper conductor cable of size 0.5 sqmm from ceiling rose / connector to fan including provision of fan hook for down rod hanging ceiling fan with nut, bolt, washer complete all as specified and directed. Make:- Havells model pacer or equivalent of make specified.

S&F sheet metal enclosure complete with metallic plug and socket heavy duty modular type 3 pin (2P + earth), 32 amp rating single phase 240 volts complete with MCB SP 32 amp "C" series complete all as specified and directed.

M&L for passing through pipe 1100V grade heavy duty cable with PVC insulated aluminium conductor served with an innner sheathing of PVC tape armoured with galvanised steel wire or tape overall PVC sheathed 16 sqmm x 2 core complete all as specified and directed.

S&F 40mm dia galvanised steel tubing (light grade) for passing cable under road/floor or fixing to poles for mechanical protection of underground cable complete with flat iron clamps made to shape and 12mm dia bolts, nuts and washers for fixing where required confirming to IS-1239 complete all as specified and directed.

S&F in replacement factory made SP & N sheet distribution boards, 12 ways, double door protection class IP-42 double door type suitable for mounting MCB/MCCB confirming to IS 13032, IS 8623, BS5484 with minimum 200 amp, copper bus bar complete all as specified and directed.

S&F MCB SP, 5 to 32 Amps, 10 KA 'C' series confirming to IS-8828:1996, IEC-898 rupturing capacity complete all as specified and directed.

S&F MCB SPN, 32 to 63 Amps, 10 KA 'C' series confirming to IS-8828:1996, IEC-898 rupturing capacity complete all as specified and directed.

Excavating in trenches not exceeding 1.5m wide and not exc 1.5m in depth for laying of cables, pipes etc and getting out including trimming the sides and forming bottom surfaces to required levels in soft/loose soil complete all as specified and directed.

Returning, filling in, including spreading, levelling and well ramming in layers not exc 25cm thick in soft/loose soil complete all as specified and directed.

Removing excavated material not exc 50m and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and directed.

S&F double wall corrugated high density polymer ethyl (HDPE) pipe for laying of electric cable of size 50mm outer diameter and 38mm inner diameter with IS 14930 (part 2):2001 laid in trenches, wall, floor, pole including bends, sockets and other connected accessories complete all as specified and directed.

Supply and install air cooled tower air conditioner, rotary compressor electric driven, single phase of capacity 2 TR complete all as specified and directed.

S&F voltage stabilizer of capacity 3 KVA for automatic operation, single phase naturally oil cooled indoor type & designed for input variation between 170V to 250V with output voltage stabilized at 230V with accuracy of + 2.5% complete all as specified and directed.

S&F sheet metal enclosure single pole & neutral with two pin and earth plug and socket complete with one single pole MCB 25 Amp 240V rupturing capacity 10KA series 'C' complete all as specified and directed.

S&F sub main wiring with two single core PVC FRLSH insulated unsheathed stranded copper conductor and earth wire 1100 volt grade and drawing into PVC conduit not less than 20mm medium grade concealed in wall of size 2x6.0 sqmm with earth wire of 1x6.0 sqmm complete all as specified and directed. Note:- Accessories for point/sub main wiring like PVC junction box, bend, tee, elbow shall be of same make.

NOTE:- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.) [(-) Rs.40,051.00]

Arnav Enterprises

M/S Ramakant Chourasia

MAHARASHTRA ENTERPRISES

RAJ ENTERPRISES

VIJ ASSOCIATES

Shri Mohan Brother

S D WAGHAMSHI

Bidder Name

S D WAGHAMSHI

M/S L M Chourasia

RAJ ENTERPRISES

Shri Mohan Brother

M/S Ramakant Chourasia

MAHARASHTRA ENTERPRISES

Arnav Enterprises

VIJ ASSOCIATES