Special repair/renovation and construction of VIP suit in the premises of rest/house/trainees hostel at RRS, Uchani (Karnal). (including PH and EI works) (re-invited)

Amount

Civil work 1 to 78:- Earth work in excavation in foundations, trenches, etc .in all kinds of soils, not exceeding 2 metres depth including dressing of bottom and sides of trenches ,stacking the excavated soil, clear from the edge of excavation and subsequent filling around masonry, in 15 cm layers with compaction, including disposal of all surplus soil, as directed within a lead of 30 metres {HSR 6.6}

Dismantling brick work, tile masonry or tile lining and tile terracing (b) in cement {HSR 8.5(b)}

Dismantling concrete (e) reinforced cement concrete with cleaning and straightening and cutting of bars if required {HSR 8.6(e)}

Dismantling concrete {HSR 8.8(g)} (g) demolishing mud phaska in tile terracing

Removing doors and windows (wooden and steel) together with the dismantling of walls :-(a ) Doors {HSR 8.17(a)}

Dismantling cement conglomerate/ terrazzo floors 25mm to 50mm thick including concrete base.{HSR 8.25)

Dismantling cement conglomerate/terrazzo floors 25 mm to 50 mm thick without concrete base. {HSR 8.26}

Scraping (a) White wash and colour wash {HSR 8.32(a)}

Scraping (c) Cement plaster {HSR 8.32(c)}

Dismantling white or coloured glazed tiles (to be carefully removed) (HSR 8.38)

Cement concrete 1:4:8 with stone aggregate 40 mm nominal size in foundation and plinth (HSR 10.39)`

Cement concrete 1:2:4 with stone aggregate 20 mm nominal size in foundation and plinth {HSR 10.41}

Cement concrete 1:2:4 with stone aggregate 20 mm nominal size in first storey upto 4 metres above plinth level {HSR 10.59+note} Ist storey

2nd storey

Pre-cast cement concrete 1:2:4 with stone aggregate 20 mm nominal size in kerbs and the like items, finished smooth with 6 mm thick cement plaster 1:3 on exposed surface including form work, placing and fixing in position, complete at the ground level or in first storey {HSR 10.77 + Note}

Pre-cast cement concrete 1:3:6 with stone aggregate 20 mm nominal size in tiles and channels and the like items, finished smooth with 6 mm thick cement plaster 1:3 on exposed surface including form work, placing and fixing in position, complete at the ground level or in first storey. {HSR 10.78 + Note}

Cement concrete 1:2:4 with stone aggregate 20 mm nominal size for reinforced concrete work in shelves excluding steel reinforcement, but including centring and shuttering, laid in position, complete in all respects {HSR 10.81}

Cement concrete 1:2:4 with stone aggregate 20mm nominal size for reinforced concrete work in slabs with inclination exceeding 25 degree with horizontal, excluding steel reinforcement , but including centring and shuttering, laid in position , complete in all respects. {HSR 10.82}

Cement concrete 1:2:4 with stone aggregate 20 mm nominal size for reinforced concrete work for walls exceeding 20 cm thickness (straight and curved) beams, girders, stairs, columns,(square or rectangular) battens and lintels etc., excluding steel reinforcement but including centring and shuttering, laid in position, complete in all respects.{HSR 10.86}

Cement concrete 1:2:4 with stone aggregate 20 mm nominal size for reinforced concrete work in footings, strips, foundations, beams, rafts, pedestals and approach slabs of bridges etc., excluding steel reinforcement but including centring and shuttering, laid in position, complete in all respects, (For work upto 1.5 metres below ground level). {HSR 10.90}

Extra over item Nos. 10.79 to 10.94 , if 1:1.5:3 mix is used, instead of 1:2:4{HSR 10.95(a)}

Damp proof course 75 mm thick of cement concrete 1:2:4 using stone aggregate with 2 coats of bitumen 20/30 penetration at 1.65 kg per sqm laid hot and sanded. {HSR 10.113}

First class brick work laid in cement sand mortar 1:6 in foundation and plinth (HSR 11.2)

First class brick work laid in cement sand mortar 1:6 in first storey upto 4 metres above plinth level (HSR 11.7+note) Ist storey

2nd storey

11.43 cm thick brick wall with every fourth course reinforced with hoop-iron laid in 1:4 cement stone dust (from crusher) mortar in superstructure (HSR 11.51)

Providing 5.72 cm brick dalli facing with brick size 22.86 cm X 11.43 cm X 5.72 cm thick to be obtained after cutting of bricks laid in cement sand mortar 1:3 on RCC lintels, beams fascia etc. including centring and shuttering complete (HSR 11.98)

Terracing consisting of tiles 22.86 cm X 11.43 cm X 3.81 cm laid over 87.50 mm mud filling on a layer of 25 mm mud plaster and an other layer of mud mortar for laying the tiles, including two coats of bitumen laid hot at 1.65 kg per sqm on top of R.C.C slab including grouting with cement sand mortar 1:3 and top surface to be left clean etc.(HSR 13.13)

Providing and fixing cast iron rain water non pressure pipe, I.S.I. mark with ears with screw and wooden plugs fixed on wall face including filling joints with spun-yarn and cement mortar 1:2 excluding head and shoe, etc. {HSR 13.45(a)} (a) 100 mm dia pipe

Extra over rate of item nos. 13.43 and 13.45(a) in case lead joints are used instead of cement joints {HSR 13.46(a)}

Providing and fixing C.I. plain bends in position with gutter, etc. {HSR 13.49 (a)} (a) for 100 mm dia pipe

Top khurra 0.6 m X 0.6 m for rain water pipe in 25 mm thick cement concrete 1:2:4 over 50 mm thick cement concrete 1:8:16 (HSR 13.50)

Bottom khurra on ground 1.2 m X 0.6 m consisting of brick-on-edge laid in cement mortar 1:3 over 75 mm cement concrete 1:8:16 including 12 mm thick cement plaster 1:3 (HSR 13.57)

Cement concrete 1:2:4 gola 10 cm X 10 cm quadrant along junction of roof with parapet wall finished smooth, where specially specified (HSDR 13.64)

Providing and fixing false ceiling with 12 mm thick Gypsum Board fixed on M.S. steel runners frame including cost of screws angles, cleats, rawel plugs with taping, filling with Gypsum compound and applying priming coat etc. complete in all respects{HSR 13.91}

Providing and fixing mineral fibre false ceilings tiles at all hieghts of size 595 x 595 mm of approved texture, design and pattern, the tiles should have Humidity Resistance (RH) of 99%, Light Reflectance 85%, Thermal Conductivity K = 0.052 (-) 0.057 w/m k, Fire Performance as per (BS 476 pt - 6 & 7) in true horizontal level suspended on interlocking T-Grid of hot dipped all round gavanized iron section of 0.33 mm thick (galvanized @ 120 gsm) comprising of main T runners of 15 x 35 mm of length 3000 mm, cross T of size 600 x 600 mm suspended from celing using galvazied mild steel item (galvanizedd @ 80 gsm) 50 mm long 8 mm outerdiameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85 x 25 x 2 mm, spaced at 1200 mm centre to centre along main 'T'. The suystem should rest on periphery walls/partitions with the help of GI perimeter wall angle of wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall S.S. screws. The exposed bottom portion of all T-sections used in false ceiling support system shall be pre-painted with polyester baked paint, for all hieghts, The work shall be carried out as per specifications, drawings and as per directions of the Engineer-in-charge. with or without groves (HSR 13.92)

Base course of floors consisting of 100 mm thick cement concrete 1:8:16 and 100 mm sand or stone filling (HSR 14.1)

Providing and fixing ceramic tiles/ anti skid tiles of size 400 mm x 400 mm or above size of approved make in flooring, laid in any pattern as specified over base of 20 mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade of tiles (HSR 14.91) Notes: i. Tile shall be premium quality (first quality) of reputed manufacturer like NITCO, KAJARIA, SOMANI, ORIENT BELL, JOHNSONS, RAK & SIMPOLO. ii. Tiles shall be fixed by using PVC spacers of required size and the space between tiles shall be filled up with cement based grout of approved make & colour. Nothing extra shall be paid for this (at first floor)

Providing and fixing 1st quality ceramic glazed wall tiles confirming to I.S. 15622 (thickness to be specified by the manufacturer) of approved make in all colour, shades except burgundy, bottle green, black of any size of approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement coarse sand mortar 1:3 and jointed with grey cement slurry, including pointing in white cement mixed with pigment of matching shades complete (HSR 14.92} (b) size of ceramic glazed tiles 300 mm x 450 mm

12 mm thick cement plaster 1:6 on walls{HSR 15.7}

15 mm thick cement plaster 1:6 on the rough side of single or half brick wall{HSR15.12}

Striking joints in lime or cement on brick and tile walls {HSR 15.69(a)}

Cement pointing 1:2 flush on flat brick flooring (HSR 15.71)

Cement pointing on stone slab pavement with cement mortar 1:2 (HSR 15.73)

Painting one coat with synthetic enamel paint in all shades on old wood work or metallic or plastered or concrete surfaces to give an even shade including rubbing down old paint (HSR 16.7)

Applying priming coat with cement primer in all shades on newly plastered or concrete exterior surfaces {HSR16.25}

Distempering with washable oil bound distemper (of approved manufacture) two coasts excluding priming coat on new work{HSR 16.57}

Providing two coats of exterior acrylic emulsion paint (HSR 16.79(b) (b) 1st quality

Providing and applying two coats of white cement based putty over plastered surface and grinding the surface smooth with sand paper to get an even and smooth finish including cost and carriage of all material, labour charges, scaffolding, sundries etc., complete (J.K/ Birla make).{HSR 16.81}

Proving and fixing 35 mm thick glazed door and windows shutters of commercial hard wood such as hollock, champ, chikrassy and chaplash, etc. ( non-coniferous timber other than teak confirming to I.S. specifications No. 1003 kiln seasoned), with vertical styles and rails, as specified in the statement no.1 ( attached in the end of this chapter), with glass panes of 4 mm thickness , tongued and grooved including the cost of iron hinges , screws, chocks/cleats, stops , etc., complete fixed in position excluding the cost of tower bolt and handles but including the labour for fixing the same (Based on 17.30 (a) + 17.24(c)} (a) 35 mm thick ( 4 mm thick glass panes)

Wire gauze commercial hard wood such as hollock , champ, chikrassy , etc., ( Non –coniferous timber other than teak conforming to I.S. specification no. 1003 kiln seasoned) door and window shutters without springs housed in chowkats including chocks, iron hinges and screws, etc., complete fixed in position ( excluding the cost of tower bolt and handles but including the labour for fixing the same)- {HSR 17.31 (i)} (i)30 mm thick Note: Nothing shall be paid extra for additional vertical style (any size) if required by the Architect or by the Engineer-in-Charge)

Factory manufactured solid flush door shutters, with block board core as per I.S. No. 1659-1969 bonded with water proof type phenol formaldehyde synthetic resin, hot-pressed, conforming to I.S. 2202 part I and II, fixed in position, including iron hinges, screws, chocks/cleats and stops, etc., (excluding the cost of any fittings other than specified above, but including labour for fixing the same in position)- (a) commercial veneering with vertical grains or cross bands and face veneer on both sides commercial facing with laminated core and lipped edges :- {HSR 17.93(a)} (i) 25 mm thick

(iii) 35 mm thick

Providing and fixing Aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS;733 and IS; 1285 fixed with raw plugs and screws or with fixing clips or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom, and sides with required neoprene felt etc. aluminium sections shall be smooth rust free straight mitered and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling C.P. brass/ stainless steel screws, all complete. (HSR 17.95) Fixed portion (Anodized Aluminium transparent or dyed to required shade according to IS;1868, minimum anodic coating of grade AC 15)

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS; 733 and IS;1285 fixed with rawl plugs and screws or with fixing clips or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom, and sides with required neoprene felt etc. Aluminium sections shall be smooth, rust free straight mitered and jointed mechanically wherever required including clear angle, Aluminium snap beading for glazing/ paneling C.P. brass/ stainless steel screws, etc. complete. (HSR 17.96) Shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including of cost of PVC/ neoprene gasket required including Aluminium fitting.

Providing and fixing glazing in aluminium door, windows, ventilator shutter and partitions etc. with PVC/ neoprene gasket etc. complete (cost of aluminium snap beading shall be paid in basic items). {HSR 17.98(b)} (b) With float glass panes of 5.00 mm thickness.

Providing and fixing of casement and fixed windows made from multi chambered UPVC profiles of 56 to 68 mm width in natural from stablized for heat, light,impact & UV radiation. The UPVC profiles should be reinforced with galvanized steel profiles of designed thickness. All openable sashes shall be having weather seat fitted in continuous lengths made from Bubble EPDM Rubber and side hung/top hund with upto 90 degree opening friction stays of SS 304 with provision of multipoint locking system made from Espag rods. All handle shall be made from Die Cast Zinc alloy (Model SEPAG)BS-1004 A in white finish with suitable locking arrangement. The windows shall be fixed to opening using expandable screws and friction stays that shall be able to with stand wind speed upto 180 km/hr. the shoot boths in windows shall be rust proof metalic coated steel. The window frames shall be fixed in masonary wall RCC with necessary fasteners, nuts, bolts, washers, caps, silicon sealant etc., complete in all respect. {HSR 17.103(a)} (a) Frame work

(c) Double glass glazing comprising of 6 mm thick toughened clear glass + 12 mm air gap + 5 mm annealed clear glass {HSR 17.103(c)}

Wrought iron and mild steel (using angles, flats square bars. tees and channels) ladders, grills, gratting frames, window guards, iron door openable or fixed stair case or parapet or any other type of railing , gates and tree guards etc., including cost of screws and welding rods or bolts and nuts complete fixed in position {HSR 18.12}

Steel reinforcement TMT bars FE-500 EQR/FE-500 D grade or more for RCC work, where no included in the complete rate of RCC incluidng straightening, bending, binding, wastage, overlaps, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire etc. and placing in position, complete in all respect for all heights/depths/storeys/basements etc. Note: Reinforcement shall be measured in length including hooks, if any, separtely for different diameters as actually used in work excluding overlaps. Wastage, overlaps, couplings, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire or other methods for binding and placing shall not be measured and cost of these items shall be deemed to be included in the rates for reinforcement. {HSR 18.22}

Supplying openable steel doors and windows, of standard steel sections, joints mitred and electrically flash welded including provision for arrangement of receiving handles, peg stay, catcher will also be welded with the frame and providing and fixing pressed steel projected hinges, iron lugs, glazing clips (excluding wooden shutters, glazing and fittings such as handles, peg stay and catcher etc.) and finished with one coat of ready mixed red lead non setting primer (HSR 18.24)

Fixing steel windows in walls with lugs, embedded in 15 cm x 11.43 cm X 7.5 cm cement concrete blocks, of 1:3:6 mix, excluding fixing of glass panes but including cost of cement concrete for lugs (HSR 18.29)

Pressed steel sheet frames (chowkhats), consisting of 2.00 mm thick steel sheet of the specified section, including iron lugs (hold fasts, iron hinges, confirming to PWD specifications, including bolts for fixing stops, locknotch, provision for receiving tower bolts, and finished with one coat of ready mixed paint red led non-setting primer of approved quality, fixed in position including the cost of cement concrete 1:3:6 for filling in the frame, and cement concrete 1:3:6 for lugs, complete:- {HSR 18.34(a)} (a.) door and window frame of size 89mmx 50mm with 40mm wide single rebate.

(c). door and window frame of size 127mmx 50mm with 40mm wide double rebate..

Dismantling/ removing of cement concrete jali (to be removed carefully) and shifting & stacking the same to maintenance store with an average lead of 1 Km., complete in all respect as directed by Engineer-in-Charge. (NS)

Providing and fixing 75 mm dia G.I. pipe (Class-B) spouts fixed in brick/RCC fascia after cutting hole and repairing the hole with cement mortar, complete in all respects as directed by Engineer-in-Charge (NS)

Providing and laying 15 mm to 18 mm thick Sarderali Granite stone in flooring laid in any pattern as specified over base of 20 mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade of stone, complete. (NS)

Providing and laying 15 mm to 18 mm thick Sarderali Granite stone in skirting laid in any pattern as specified over base of 12 mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade of stone, complete. (NS)

Providing and fixing vitrified tiles of size 800 x 800 mm of double charged quality in flooring laid in any patterns as specified over base of 20 mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade to tiles Notes: i. Tile shall be premium quality (first quality) of reputed manufacturer like NITCO, KAJARIA, SOMANI, ORIENT BELL, JOHNSONS & RAK ii. Tiles shall be fixed by using PVC spacers of required size and the space between tiles shall be filled up with cement based grout of approved make & colour. Nothing extra shall be paid for this. (NS)

Providing and fixing vitrified tiles of size 400mm x 800mm of double charged quality in skirting/dedo laid in any patterns as specified over base of 12 mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade to tiles Notes: i. Tile shall be premium quality (first quality) of reputed manufacturer like NITCO, KAJARIA, SOMANI, ORIENT BELL, JOHNSONS & RAK ii. Tiles shall be fixed by using PVC spacers of required size and the space between tiles shall be filled up with cement based grout of approved make & colour. Nothing extra shall be paid for this. (NS)

Providing and fixing 1 mm thick decorative high pressure laminated sheet on plain/wood grain in gloss/matt/suede finish with high density protective surface layer and reverse side of adhesive bounding quality confirming to IS:- 2046 Type-S, including cost of nails, adhesive of approved quality on both side of 35 mm thick factory manufactured solid flush door shutters (excludiing cost of factory manufactured solid flush door shutters), complete in all respect as directed by Engineer In-charge. (NS)

Providing and fixing 0.80 mm thick decorative high pressure laminated sheet on plain/wood grain in gloss/matt/suede finish with high density protective surface layer and reverse side of adhesive bounding quality confirming to IS:- 2046 Type-S, including cost of nails, adhesive of approved quality on both side of 25 mm thick factory manufactured solid flush door shutters (excludiing cost of factory manufactured solid flush door shutters), complete in all respect as directed by Engineer In-charge. (NS)

Providing and fixing 12mm thick toughened glass of AIS/Modi Guard/Saint Gobain make duly toughened by standardized plant, with required holes and cut outs in fixed partition & openable panels/leaf for fully glazed double leaf doors, complete in all respects as per architectural drawing and design or instructions of Engineer-in-Charge. (NS)

Providing and fixing fittings/accessories i.e. handle of size 600 mm x 30 mm of DORMA make (model XL-C-3004) including cost of stainless steel screws etc. complete in all respect as directed by Engineer-in-Charge. (NS)

Providing and fixing fittings/accessories i.e. glass door package with lock (floor machine) of DORMA make (model XL-C-4001) including cost of stainless steel screws etc. complete in all respect as directed by Engineer-in-Charge. (NS)

Providing and fixing 45 mm wide solid & 30 mm wide jali Zebra type (PCL Rainbow) horizontal Venetian blinds of required size and shape, fixed in position including rawal plugs and screws etc., complete in all respects. (NS)

Providing and fixing PVC wall paneling consisting of 7mm thick hollow PVC section of cactus or any other equivalent make (as approved by Engineer-in-Charge), PVC U section beading of size 25mmx8mmx12mm and PVC angle nosing of size 25mmx25mmx1.5mm of cactus or any other equivalent make (as approved by Engineer-in-Charge), including cost of PVC gutties, screws, jointed with polyfix (instant glue), complete in all respect as per drawing or as directed by Engineer-in-Charge (NS)

Public Health Work 79 to 149:- Excavation of trenches in streets, lanes or in open areas for storm sewer, sewers running by gravity and manholes to full depths as shown in drawing including shoring, timbering of poling boards, frame system type, dressing to correct sections and dimension, according to templates and levels, dewatering, provision for diversion of traffic, cutting trees and bushes, etc., night signals, profiles, pegs, sight rails, boning rods, crossing over trenches, for access to the houses, watching, fencing, etc., fixing and maintenance of caution boards, refilling of trenches, watering of refill, in 15 cm layers, ramming and restoration of unmetalled or unpaved surface to original condition and removal of surplus soil, from site of work, up to a lead of 1 K.M. in ordinary soil {HSR 6.10(a)} (a) for depth of excavation not exceeding 3 metres below ground level

Cement concrete 1:8:16 with stone aggregate 40 mm nominal size in foundation and plinth.{HSR 10.28}

Cement concrete 1:2:4 with stone aggregate 20 mm nominal size in foundation and plinth (HSR 10.41)

Cement concrete 1:2:4 with stone aggregate 20mm nominal size for reinforced concrete work in slabs with inclination not exceeding 25 degree with horizontal, excluding steel reinforcement , but including centring and shuttering, laid in position , complete in all respects (HSR 10.82)

Extra over item Nos. 10.79 to 10.94 , if 1:1.5:3 mix is used, instead of 1:2:4 {HSR 10.95(a)}

First class brick work laid in cement sand mortar 1:5 in first storey up to 4 metres above plinth level. (HSR 11.8)

12 mm thick cement plaster 1:5. (HSR 15.6)

Steel work, fixed independently without connecting plates, including cutting, hoisting and fixing in position in :- {HSR- 18.1 (a)} (a) R.S. Joist 6"x 3"

Fe-500 D TMT steel bars for R.C.C., works, where not included in the complete rate of R.C.C. , including bending, binding and placing in position complete (HSR 18.22)

Labour for laying, jointing, fixing and testing G.I./P.V.C./W.I. pipe lines and specials tees, bends, sockets elbows etc. inside building and testing etc. complete including cutting threading. {HSR 28.18(b)} INCLUDING COST OF SPECIALS (i) 15 mm internal diameter of pipe line

(ii) 20 mm internal diameter of pipe line

(iii) 25 mm internal diameter of pipe line

Extra for fixing and jointing union couplings in G.I and W.I pipe lines. {HSR 28.21} (i) 15 mm internal diameter

(ii) 20 mm internal diameter

(iii) 25 mm internal diameter

Cutting holes up to 23 cm through stone masonry or brick work in cement walls for pipes and making good including repointing, replastering and finishing according to existing finish where required. {HSR 28.24(a & b)} (a) 11.48 cm thickness of walls

(b) 22.86 cm thickness of walls

Cutting holes up to 23 cm square for pipes in floor and roofs of cement concrete reinforced concrete or reinforced brick work and making good including repointing, replastering, replacing bitumen and colour or white washing where required. {HSR 28.26(b)} (b) 115 mm thickness of roof of floor

Fixing and jointing gun metal peet valves (heavy pattern) with hand wheels, on G.I pipelines laid in the ground or inside buildings including cartage from divisional stores or nearest railway station to site of works. {HSR 28.29 b & c} (b) 20 mm internal diameter

(c) 25 mm internal diameter

Making connection with the existing G.I branch main up to 40 mm size including cutting and threading pipe etc., complete excluding cost of tee and long screw, but including cartage of material to site. (HSR 28.34)

Constructing brick masonry inspection chambers sizes as given below up to 0.60 metre average depth in cement mortar 1:5 lime concrete with 40 percent lime mortar2:3 in foundation cement concrete 1:2:4 benching 12 mm thick cement plaster 1:2 with a floating coat of 1 mm thick of neat cement R.C.C. 1:2:4 slab 100 mm thick/C.C. topping. 50 mm thick with 455 mm x 455 mm/ 455 mm x 610 mm inside light duty C.I. inspection chamber cover and frame weight as per I.S.I specification painted with 3 coats of black bitumastic superior paint complete as per standard design. {HSR 29.84(b & c)} (b) size 450 mm x 600 mm inside (with 455 mm x 610 mm cover and frame single seal pattern I weighing 38 kg with C.C. topping)

(c) size 600 mm x 900 mm inside ( with 455 mm x 455 mm cover and frame light duty single seal weighing 20 kg. With R.C.C. slab)

Extra for every 0.30 metre depth of inspection chamber:- (b) 450 mm x 600 mm (HSR 29.85 (b & c)

(c) 600 mm x 900 mm

Providing slat glazed stone ware pipes grade ‘A’ in standard length of 600 mm each pipe marked with is: 651 and their lowering, cutting, jointing and testing as desired in HSR item No. 29.38, 29.39, 29.40, including the cost of jointing materials as well as carriage, loading, unlloding stacking, handing, re-handling etc. complete in all respects to the satisfaction of Engineer-In Charge. (HSR 29.95) 150 mm internal dia

Providing and fixing HDPE WATER STORAGE TANKS of sintex, diplas O.K. Supreme make with covers/ lids marked with IS: 12701 on roof top of buildings including cost of hoisting and placing in position, making connections with inlet and outlet pipes, providing overflow & scour provisions with suitable plug on scour pipe including cost of nipples, washers, flanges for connections in tanks complete in all respects to the satisfaction of Engineer-in- Charge. (HSR 30.119) 1000 Ltr. Capacity

Supply of CPVC pipes ISI Marked Finolex/Astral/Prince Make., complete in all respect. (NS) (i)15 mm i/d

(ii) 20 mm i/d

(ii) 25 mm i/d

Supply of CPVC Union Couplings with Brass internal fittings of Finolex/Astral/Prince Make., complete in all respect. (NS) (i) 15 mm i/d

(ii) 20 mm i/d

(ii) 25 mm i/d

Supply of Gun Metal Peet Valve/ ball valve ISI Marked of DRP/Leader/jBajaj make (NS) (a) 20 mm i/d

(b) 25 mm i/d

Providing and fixing PVC floor traps of 3" i/d outlet of Prince/Supreme/skipper make complete in all respect. (NS)

Supply and fixing of PVC gully traps of 110 mm dia size ( 4") with cover and frame of Prince/Supreme/skipper make complete in all respect. (NS)

Supply of PVC pipe 6 kg/cm² pressure of ISI marked of Prince/Supreme/ skipper make (NS) a) 90mm o/dia (3” i/dia) size

b) 110mm o/dia (4” i/dia) size

Supply and fixing C.P. brass Jali 4"/5" dia size as required (with anti cockroch lock) of best quality, complete in all respect. (NS)

Providing and fixing in position fore front wall hung bowl (WC) SKU code No. K-72838-IN-1-O of KOHLAR Make, complete in all respect (NS)

Providing and fixing in position Karess Vassel Lavatory SKU code No.. K-2764-T-1-O of KOHLAR Make, complete in all respect (NS)

Providing and fixing in position pure clean seat cover fore front SKU code No.. K-96001 of KOHLAR Make, complete in all respect (NS)

Providing and fixing in position Aleo Basin Mixer SKU code No. K-72275 in 4ND-CP of KOHLAR Make, complete in all respect (NS)

Providing and fixing in position Inline stop valve crome polished,SKU code No.-K-16089 of KOHLAR Make, complete in all respect (NS)

Providing and fixing in position CP Grid Drain complementary SKU code No.-K-45432 IN-CP of KOHLAR Make, complete in all respect (NS)

Providing and fixing in position CP brass (straght) in line stop valve (concealed stop cock)SKU code No.K-37340 in -9-CP of KOHLAR Make, complete in all respect (NS)

Providing and fixing in position Bottle Trap SKU code No. K-75823-IN-CP of KOHLAR Make, complete in all respect (NS)

Providing and fixing in position Patio Touchless urinal with sensor SKU code No. K-16321 M-O of KOHLAR Make, complete in all respect (NS)

Providing and fixing in position In-wall tank Pneumatic,SKU code No.K-77027 in P-NA of KOHLAR Make, complete in all respect (NS)

Providing and fixing in position CP Face plate pabble (for in wall tank)SKU code No.-K-54131-N-P-CP of KOHLAR Make, complete in all respect (NS)

Providing and fixing in position best Indian make Brackets & (bolts) SKU code No.K-1224238-O M-12 of KOHLAR make, complete in all respect (NS)

Providing and fixing M. seal of 200 gm packing of best quality,complete in all respect (NS)

Providing and fixing Connector Assessory packSKU code No.-K-1046327-S of KOHLAR make, complete in all respect (NS)

Providing and fixing looking mirror of 4'-0" x 2'-6" size (1 No.) and 3' x 2'-6" (5 Nos.) or as required, 5 mm thick mounted on asbestos sheet ground fixed in position by means of 4 No. CP brass screws and washers on rubber washers and rawl plugs embeded in wall or CP brass clamps with CP brass screws etc. complete in all respect. make -Saint Gobain/ Modi/Atul (NS)

Providing and fixing in position towel rail 600 mm long of Jaquar Make Model No. ACN 1111SM, complete in all respect

Providing and fixing in position coat & hat hooks of Jaquar Make Model No. ACN 1161N, complete in all respect

Providing and fixing in position paper holder of Jaquar Make Model No. ACN 1153 S, complete in all respect

Providing and fixing in position CP brass Bib taps 15 mm i/dia with wall flangs of Kohlar make Code No. K-16093, complete in all respect (NS)

Providing and fixing in position CP brass shower arm 190 mm long light body round shape with flange of Jaquar make Model No. SHA-477, complete in all respect (NS)

Providing and fixing in position CP brass overhead shower 100 mm dia round shape single flow with roubit cleaning system of Jaquar make Model No. OHS-1989, complete in all respect (NS)

Providing and fixing in position hand dryer- optima Model No. HDR-SAP-M99 ACS of Jaquare make , complete in all respect (NS)

Providing and fixing in position storage water heater 15 ltr capacity Elena Model (Digital) Five star rating of Jaquare make , complete in all respect (NS)

Providing and fixing 15 mm to 18 mm thick Z-Black granite stone (polished) on worktop laid in any pattern as specified over base of 12 mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade including rubbing and polishing, complete. (NS)

Providing and installing split type air conditioners, five star rating inverter type with copper coils 2.0 ton capacity ± 10%) fitted with super tropical - DC PAM inverter- return cooled - rotary compressor operating on refrigerant R-410-A suitable for wall mounting confirming to IS : 1391 (part-2)/92 (except power consumption norms) with upto date amendments, suitable for operating on 230 volts, 50 Hz single phase A.C. supply having following specifications:- (i) Cooling coil row -3 Nos. (ii) Air flow (CMH) -1450 cum/ hr. (iii) Sound level (H/M/L)- 41/38/34/25(silent mode) (iv) Louvers swing- 3D + 3D Auto etc. complete in all respect MAKE :- O General/Toshiba/Mitsubishi (Heavy Industries) (five star rating) Model as approved by the Engineer-in-Charge

Providing and fixing extra copper tubing/regrigerent pipe for above split air conditioners (if required) consisting of inlet, outlet pipes, insulation and electric wiring etc. as per requirement, complete in all respect beyond 4.0 metres length. (NS) NOTES :- INSTALLATION OF AIR CONDITIONERS INCLUDES:- 1. Mounting/ fitting indoor and outdoor units at their respective locations 2. Providing & laying refrigerant pipe line of four metres length and beyond (if required) and connecting both the units after drilling holes in the wall, if required. Thickness of the copper tubing shall not less than 0.80 mm. 3. Insulating the suction pipe with expanded polythene pipe tubing. 4. Providing & laying drain pipe to throughout the condensate water being formed in the indoor unit 5. Leak testing entire system 6. Charging refrigerant gas in the unit 7. Electric wiring ; suitable electric wiring and switch should be provided with in 4 metres of the location of the units as per requirement 8. PVC channels for concealing the pipes etc. 9. Refrigerant piping thickness- 18 guage (1 mm) (i) Liquid line :- 6.35mm (1/4") (ii) Gas line:- 15.88mm(5/8") 10. Providing and fixing 2.5 sqmm x 4 core coper wire sheathed for connections and communication between indore unit to outdoor unit. (NS)

Providing and installing split type air conditioners, four star rating inverter type with copper coils 1.5 ton capacity ± 10%) fitted with super tropical - DC PAM inverter- return cooled - rotary compressor operating on refrigerant R-410-A suitable for wall mounting confirming to IS : 1391 (part-2)/92 (except power consumption norms) with upto date amendments, suitable for operating on 230 volts, 50 Hz single phase A.C. supply having following specifications:- (i) Cooling coil row -3 Nos. (ii) Air flow (CMH) -1000 cum/ hr. (iii) Sound level (H/M/L)- 45/38/26(silent mode) (iv) Louvers swing- 3D + 3D Auto etc. complete in all respect MAKE :- O General/Toshiba/Mitsubishi (Heavy Industries) (four star rating) Model as approved by the Engineer-in-Charge

Providing and fixing extra copper tubing/regrigerent pipe for above split air conditioners (if required) consisting of inlet, outlet pipes, insulation and electric wiring etc. as per requirement, complete in all respect beyond 4.0 metres length. (NS) NOTES :- INSTALLATION OF AIR CONDITIONERS INCLUDES:- 1. Mounting/ fitting indoor and outdoor units at their respective locations 2. Providing & laying refrigerant pipe line of four metres length and beyond (if required) and connecting both the units after drilling holes in the wall, if required. Thickness of the copper tubing shall not less than 0.80 mm. 3. Insulating the suction pipe with expanded polythene pipe tubing. 4. Providing & laying drain pipe to throughout the condensate water being formed in the indoor unit 5. Leak testing entire system 6. Charging refrigerant gas in the unit 7. Electric wiring ; suitable electric wiring and switch should be provided with in 4 metres of the location of the units as per requirement 8. PVC channels for concealing the pipes etc. 9. Refrigerant piping thickness- 18 guage (1 mm) (i) Liquid line :- 6.35mm (1/4") (ii) Gas line:- 12.7 mm(½") 10. Providing and fixing 2.5 sqmm x 4 core coper wire sheathed for connections and communication between indore unit to outdoor unit. (NS)

Providing and installation of automatic voltage stabilizer of 5.00 KVA capacity(heavy duty ) copper wound 100 up voltage of V-Guard /ISI marked complete in all respect. (N.S.)

Providing and fixing in position powder coated MS stands for outdoor units including suitable nuts & bolts etc., of best quality complete in all respect (NS)

Providing and fixing UPVC pipes and specials of ¾ " dia size (15 mm i/dia ) for drainage of condensed water from air-conditioner to nearest disposal point, complete in all respect to the direction of the Engineer In-charge. Make:- Prince/Supreme/Skipper (NS)

Electrical work 150 to 200:- S/E of Moulded case circuit breaker on wall or on existing pedestal i/c bonding to earth and necessary connections :- HSR 31.12 (c ) (i)15amp to 60 amp 415V 10KA 3 Phase

(ii)100amp to 220amp 415V 10KA 3Phase

(iii)250AMP 415V 35KA 3 Phase

(iv)300 to 400amp 415V 35KA 3P

S/E of MCBs/isolator 240/415 V in existing distribution board including making necessary connections :- HSR 31.17 (a)6 to 32 amp. MCB SP

(b)40 amp to 63amp TPN MCB

Pipe Laying:- (xxx) S/E of PVC pipe of 6 Kg. pressure, laid 1 metre below ground level complete including digging refilling of the trenchy with jointing etc. (a) PVC pipe 65mm dia. HSR 31.21

EARTHING (HSR 31.22) (i) Earthing with G.I. earth pipe 4.5 m long and 40 mm dia with masonry enclosures on the top etc. as required

(ii) Extra for charcoal or coke and salt for GI plate or copper plate earth electrode.

(xii)Pdg. and laying earth connections from earth electrode with 4.00 mm dia G.I. wire in 15mm dia G.I. pipe from earth electrode as required.

UNDERGROUND CABLES S/E of underground cable 1 metre below ground level covered with sand and bricks including necessary connections, digging and refilling of trenches.(HSR 31.25) (xxix) 95 sqmm 3.5 core cable (armoured)

UNDERGROUND CABLES Supply and erection of underground cable loose in existing pipe or trenches complete with necessary connections.(HSR 31.26) (xxix) 95 sqmm 3.5 core cable (armoured)

Miscellaneous (HSR 31.35 (i) Supply of M.S Pipe ( B Class for suspension rod ceiling fan i/c threading if required (a) 15mm Dia

(ii) Supply and erection of girder clamp for ceiling fan i/c painting upto 15cm section

S/E of PVC unsheathed copper conductor cable single core 1100 volts grade in pipe of suitable size excluding cost and erection of pipe. (HSR 31.40) (i) Cable Size 1.5 sqmm (3/0.81)

(ii) Cable Size 2.5 sqmm (3/1.05)

(iii) Cable Size 4.0 sqmm (7/1.05)

(iv) Cable Size 6.0 sqmm (7/1.05)

S/E of PVC conduit pipe ISI marked (Medium) recessed in wall / ceiling etc. including cost of PVC bends, inspection box and all other material required to complete the job in all respect. HSR 31.44 (b) 25 mm dia

S/E of copper lugs including crimping etc. upto the entire satisfaction of Engineer-in-charge of work. HSR 31.45 (b) 4sqmm to 6 sqmm

Pdg. & fixing modular type accessoriesm of app. Make in existing box including fixing and making necessary connections complete in all respect. HSR 31.56 10 amp. 1 way switch

20 amp. Switch

10 amp. Socket

16 amp. Socket

Fan Regulator

Bell Push

Call Bell Ding Dong

Blinking plate

Pdg & fixig GI concealed sheet metal boxes with inner and outer face plate including concealing the box in wall and fixing in position with inner plate with all labour and matrial required for the job. HSR 31.57 2 Modules

3 Modules

6 Modules

8 Modules

12 Modules

S/F of rotary handle for on/off operation of existing MCCB in the L.T panel i/c fixing the same in position with all labour and material required HSR 31.66 Rotary Handle above 125A MCCB

S/E/T/C of multicore telephone cable conductor size 0.51 mm bright annealed copper conductor PVC insulated and sealed in existing pipe/ channel and making necessaryconnection complete in all respect with all labour and material required to complete the job in all respect. HSR 31.78 (i) 2 Pair telephone wire

SITC of Cat-6 Cable in existing PVC conduit/PVC channel complete in all respect with all labur and material required to complete the job in all respect. HSR 31.80

Supply, installation testing and commissioning of wall/free standing floor mounting dust & vermin proof compartmentalized cubical panel made out of 2mm thick CRCA sheet, required hardware 3mm thick Bakelite sheet provided all along the bus bar and cable alley separating switches compartment and supporting suitable channel duly painted by 2 coat of Zinc/Red oxide primer followed by 2 coats of powder coating in grey or required shade after rinsing. The panel having PU/Neoprene rubber gasket of not less than 3mm thickness separate detachable gland plate MS base channel hinged door with inter locking arrangement for equipment/switch wear. Transparent acrylic sheet shall be provided in front of bus bar compartment to prevent direct access to bus bar Bakelite sheet 3mm thick for separately cable alley to BBC from switch chamber extended solid copper bars upto cable alleys shall provided for outgoing connection which shall be paid as extra items. Side walls and cable alley compartments shall be having bolted type doors with detachable extension type structure. The panel will be complete with control wiring (copper) and fuse protection (Only outer area on all sides shall be measured) (HSR 31.63)

Supplying and fixing of copper bus bar duly tinned by means of SMC/DMC type insulator high tensile nuts and bolts spring washers fixing to same in existing panel including bending, cutting in required shape and size and insulation with colour coding heat shrinkable PVC insulation complete in all respect.(HSR 31.64)

Supply and erection of heavy duty 4 Pole ON Load Changeover load breaker switch comprising of switches 63A to 400A suitable for operation on 415V complete with all accessories. iii) 200Amp 4 Pole ON Load Changeover Switch (HSR 31.74)

S/E of recessed type 42 watt full window glare free opal difffuse LED panel of size 595x595 mm suitable for Armstrong/POP/GB ceiling with M.S. Powder coated white housing. Total system lumen of 42 watt LED should be 4600 or above in cool day light (5600k to 6500k), Power factor >0.95, CRI (Ra) >80, LED lamp efficiency ≥140 lm/w, Average life >50000hours, complete with all accessories as required with connections. (Industrial) Make Havell's , Philiphs , Bajaj (NS)

S/E of recessed type 24 watt full window glare free opal difffuse LED panel of size 300x300 mm suitable for Armstrong/POP/GB ceiling with M.S. Powder coated white housing. Total system lumen of 24 watt LED should be 1920 or above in cool day light 6500k, Power factor >0.95, CRI (Ra) >80, LED lamp efficiency ≥140 lm/w, Average life >50000hours, complete with all accessories as required with connections. (Industrial) LHEBHEP71Z1W024 Havell's or equivalent Bajaj , Philiphs. (NS)

S/E of AC ceiling fan capacitor type complete with shackle, 300 mm down rod etc. with rating 5 star. 1200 mm sweep. (NS)

S/E of AC ceiling fan capacitor type complete with shackle, 300 mm down rod etc. with rating 1400 mm sweep. (NS)

SITC of Data Point Switch including the cost of petty material required to complete the job upto entire satisfaction of Engineer-in-charge. (NS)

SITC of Telephone Jack Switch including the cost of petty material required to complete the job upto entire satisfaction of Engineer-in-charge. (NS)

S/E of surface/wall mounted ≤20W integrated LED 4 feet fitting with Epoxy Powder coated white/Grey extruded aluminium channel housing for efficient heat dissipation. Total system lumen of 20 watt LED should be ≥ 2000 or above in cool day light (5700K to 6500K), Power factor >0.95, CRI >80, Average life >50000 hours. Complete with mounting Brackets & accessories as required with connections(Industrial)Make: Philips, Havells, Wipro, Bajaj. (NS)

Supply of propeller type AC ventilating fan (exhaust fan) with necessary earthing arrangements of fan with shutter complete in all respects Size 300mm(12”) sweep Make: Orient, Usha, Khaitan, Havells. (NS)

S/I/T/C of push ON/OFF type 25 A modular type motor starter switch (white color) for AC's including the cost of petty material required to compete the job upto entire satisfaction of Engineer-in-charge. (NS) Make;- Schneider/Crabtree/Athena

S/E of LED Street Light of system voltage < 70/72watt IP66 Multiple LED with Lens optics and pressure die-cast aluminium housing for effective thermal management. Total system lumen < 72watt LED should be 7700 or above in cool day light 5700K Lumen efficency > 110lm/w. Power Factor >.95 with connections on existing street light / PCC Poles i/c 3 year defect liability period and free replacement in case of non functioning of the light fixture Make Philiphs , Havell's , Wipro,Bajaj , HPL (NS)

S/E of Single Arm bracket 1.5mtr Long 40mm dia G.I bracket with Clamp 02 nos. with all petty material required to complete the job for satisfaction of Enginneer in charge. (NS)

S/E of surface/wall mounted ≤14W integrated LED 1 feet fitting with Epoxy Powder coated white/Grey extruded aluminium channel housing for efficient heat dissipation. Total system lumen of 14 watt LED should be ≥ 1400 or above in cool day light (5700K to 6500K), Power factor >0.95, CRI >80, Average life >50000 hours. Complete with mounting Brackets & accessories as required with connections(Industrial)Make: Philips, Havells, Wipro, Bajaj. (NS)