Providing, installation, testing and commissioning of 4000 GPH x 225 meter head pump set alongwith allied works at pumping station Ramnagar stage-2nd

Amount

Providing, installation, testing and commissioning of 4000 GPH X 220-225 meters head Pump coupled with minimum 40 HP motor at pumping station Ramnagar stage-2nd by way of shifting of pump motor set with allied accessories upto road side near pumping station Ramnagar stage-2nd by mechanical transport including loading / unloading the same from vehicle with the help crane, manual labour and then dragging manually up to the pump room on channels/pipes using pick axes, crowbars, ropes, tripod stand etc. and stacking inside pump-room. Laying of foundation block by way of bulk excavation up to the depth of about 2 meters so as to form a size of 6’x3’x3’.Dumping of excavated material outside the pump room at a distance of 100 meters approximately. Providing and fabrication of 6 no. foundation bolts of suitable diameter and one meter long by threading them at one end and making of anchor to other end. Laying of bed concrete of 1:4:8 mix using 20 percent aggregate, laying of RCC of 1:1.5:3 mix including supply/fixing of form work / shuttering, aggregates, sand and cement, reinforcement steel 10mm complete with cutting, bending, placing in position and binding , angle iron for supporting/alignment of base-frame, welding, placing of foundation bolts with base frame and making proper alignment of base frame horizontally as well as longitudinally, deployment of vibrator, mixer, welding set, tools and tackles etc. and curing complete. Job further includes dragging of pump motor set from the stacking place and then placing them on the base frame by manual labour and other tools and tackles, Leveling of pump motor set on the base frame by using laminated sheet, strips and coupling thereof. Laying of 80mm dia GI suction and delivery pipe lines to the pump set by providing/cutting of 80mm dia pipes as per site requirement approximately 25 meters in length in convenient lengths with the help of oxygen acetylene gas. The cut edges shall be grinded with grinder to give them a smooth and even surface and then laying, aligning, welding of suction and delivery pipes in continuous weld including providing, fabrication and fitting of 80mm dia MS bends, flanges, expanders, reducers, rubber gaskets, as per requirement. Providing/fitting of 80mm dia cast iron sluice valve-1no along with nuts, bolts, gasket etc. to the suction pipe line and 80mm dia CS sluice valve and CS NRV one no. each of rating compatible with the delivery head, with bypass system including nuts, bolts, gasket, flanges on the delivery pipe side of pump set and connecting with manifold. The weld should be free from blow holes and porosity to have leak proof water tight joint. Suctions / delivery pipelines should by properly painted with red oxide primer and subsequently good quality black paint. Fabrication and fitting of angle iron board alongwith providing / fitting of 200 ampere MCCB, 50KA breaking strength of reputed make on the board. Job further includes providing and fitting of 25mm sq. copper cable from panel to motor approximately 25 meters in length and 95mm2 3.5 core aluminum cable approximately 15 meters in length from transformer to main board complete with thimbles and insulation material ,confirming to ISI standard. Complete job includes cost of material and machinery, transportation charges, manual carriage charges, skilled and unskilled labour charges , hire charges of tools and tackles etc. (Complete job)

GANPATI ELECTRICAL AND MECHANICAL WORKS

N B Engineering and Electric Works