REPAIR AND MAINTENANCE TO STEEL/WOODEN FURNITURE OF RR UNITS AT DHARMUND AND NACHLANA UNDER AGE (I) BHALRA

Amount

ALMIRAH LARGE/MED STEEL WITH SHALVE/1/2 HANGING 1/2 SHALVES & ALMIRAHA OF SIZE 1.8MX1.2MX0.4M :Replacement of old existing broken / unserviceable locks of any description and in any position with new locks, six lever with double keys , fixing with suitable nuts including repair of locking device , complete all as specified and directed by Engineer-in-Charge Make:Godrej/Harrison

Replacement of old existing broken / unserviceable door handles of Almirah and new door handle of size 100mm long, cast Iron chromium plated of approved make of Almirah shall be fixed with suitable nuts and pins, complete all as specified and directed by Engineer-in-Charge .

Replacement of old existing broken / unserviceable Legs of Almirah and new Legs made out of 1.0mm mild steel sheet including welding of legs where as required, complete all shown in drg and as directed by Engineer-in-Charge .

Taking out unserviceable steel clamp with new steel clamp made out of MS sheet 3.00mm thick of size 50mmx20mm including fixing of lose shelves, complete all as specified and as directed by Engineer-in-Charge.

Replacement of old damaged/ unserviceable shelves of Almirah large with new shelf 1.0mm thick Mild Steel Sheet of size 0.765mx0.44m with suitable clamps as shown in drg to be painted with two coat of synthetic enamel paint (Olive green) over a coat of red oxide primer with spray gun stove enamel paint, finish to the required shade , complete all as shown in drg and as directed by Engineer-in-Charge

Replacement of old damaged/ UNSV shelves of Almirah Medium with new 1.0mm thick Mild Steel Sheet of size 0.765mx0.44m with suitable clamps as shown in drg and to be painted with 02 coats of synthetic enamel paint (Olive green) over a coat of red oxide primer with spray gun stove enamel paint, finish to the required shade , complete all as shown in drg and as directed by Engineer-in-Charge

Replacement of unserviceable locking device from Almirah large/Medium steel with new locking device, complete all as shown in drg and as directed by Engineer-in-Charge

BED WITH PLY TOP : Replacement of unserviceable/demaged long rail from Bed with ply top with new long rail made of sheesham seasoned, hard wood size 1980mm x90mm x35mm matching with existing shape and size, complete all as specified and directed by Engineer-in-Charge

Replacement of unserviceable/demaged headboard with new headboard of size 0.90mm x0.46m made of ply wood commercial, 4.0mm thick and one side teak faced, duly covered with 4mm thick teak wood beading all around, complete all as shown in drg and as specified and directed by Engineer-in-Charge. Make : Kit ply/National Bhutan/Nova pan

Replacement of unserviceable/demaged footboard from Bed with ply top with new footboard made of ply wood commercial, 3.5mm thick and one side teak faced, duly covered with 4mm thick teak wood beading all around, complete all as shown in drg and as specified and directed by Engineer-in-Charge. Make : Kit ply/National Bhutan/Nova pan

Replacement of unserviceable legs from Bed with ply top with new legs made of seasoned hard wood complete all as shown in drg and as specified and directed by Engineer-in-Charge Make : Kit ply/National Bhutan/Nova pan

Replacement of unserviceable legs ply wood and stiffener from Bed with ply top with new ply wood top commedrcial, 12mm thick of size 0.90m x1.98m, exterior grade BWR including hardwood stiffener provided at bottom of ply wood, complete all as shown in drg and as specified and directed by Engineer-in-Charge. Make : Kit ply/National Bhutan/Nova pan

CHAIR REVOLVING WITH HIGH BACK & CHAIR COMPUTER WITH ARMS : Removing / taking down old existing broken base stand of chair revolving of any type and S & F new base stand of chair revolving complete with hydraulic system, fixed all as shown on drawing and as directed by Engineer-in-Charge.

Replacing tapestry cloth from seat & back of chairs with new tapestry cloth of approved quality & shade including replacement of foam cushion of density 40 kg/cum, 100 mm thick 6mm thick pressed and plywoood of size 530 mm x470mm etc, as required, including painting, repair, welding and readjustment of chair as per trade pattern, complete all as directed by Engineer-in-Charge.Model

Replacement of unserviceable hand rest from chair (Executive) with new hand rest of size 700mmx50mmx20mm of different type as per trade pattern matching with the existing hand rest, complete all as directed by Engineer-in-Charge.

Replacement of unserviceable twin wheel Castor from chair executive fixed with new twin wheel castors per sample complete all as direction by Engineer-in-Charge.

CHAIR OFFICE MAT : Replacement of old existing UNSV seat and back from chair executive and fixed with new seat & back made out of ply wood & foam cushion cover with superior crap fabric in Hans Pattern shall be fixed on the frame with 08 nos steel screw and washer of adequate size as per sample, complete all as specified and directed by Engineer-in-Charge.

Replacement of old Plastic Arms (PP Arms) from chair and new supply Plastic Arms (PP) & fixed with 02 Nos Nut & washer, complete all as specified and directed by Engineer-in-Charge.

Materials and labour for welding to damaged/broken flat iron 25mmx6mm thick length 0.48m duly welded beneath the seat frame shall be painted two coat of synthetic enamel paint( black colour)including preparation of steel surface all as directed by Engineer-in-Charge.

CHAIR DINING : Replacement of U/S rear leg from chair dining with new rear leg of seasoned teak wood of size 0.89mx0.030mx0.055m matching with the existing shape and size, complete all as specified and directed by Engineer-in-Charge.

Replacement of U/S front leg from chair dining with new front leg of seasoned teak wood of size 0.46mx0.080m x 0.055m from chair dinning with new front leg of seasoned teak wood matching with the existing shape and size, complete all as specified and directed by Engineer-in-Charge.

Replacement of U/S front/back/side rail from chair dining with new front/back/side rail made out of well seasoned teak wood of size 0.430m x 0.030mx0.065m matching with the existing shape & Size, complete all as specified and directed by Engineer-in-Charge.

Replacement of U/S stiffeners from chair dining with new stiffeners made of size 0.44mx0.025mx0.20m made out of well seasoned teak wood matching with the existing shape & size, complete all as specified and directed by Engineer-in-Charge.

Re-canning of chair dining arms with 2 mm wide half round white plastic cane and perimeter canning with 4 mm cane as shown in drawing including supply of new cane as required, complete all as specified and directed by Engineer-in-Charge. (Make-Shah/Primer)

French polish of best quality to the chair dining with arms including preparation of surface complete all as specified and directed by Engineer-in-Charge.

LOCKER STEEL (770X600X950MM,770X600X450MM , 800X600X450MM & LOCKER BED SIDE) : Replacement of old existing broken / unserviceable locks of any description and in any position with new locks, 80mm six lever with double keys , fixing with suitable nuts including repair of locking device , complete all as specified and directed by Engineer-in-Charg Make:Godrej/Harrison

Replacement of old existing broken / unserviceable haps and stapples of any description and in any position with new haps and staples 75x4x3mm chromium plated , fixing with suitable secrews , complete all as specified and directed by Engineer-in-Charge.Make:Godrej/Harrison

Replacement of old existing broken / unserviceable door handles of locker steel and new door handle of size 100mm long, cast Iron chromium plated of approved make of locker steel shall be fixed with suitable nuts and pins, complete all as specified and directed by Engineer-in-Charge .

Replacement of old existing broken / unserviceable Legs of locker steel and new Legs made out of 1.0mm mild steel including welding of legs where as required, complete all shown in drg and as directed by Engineer-in-Charge .

Replacement of unserviceable locking device from locker steel with new locking device, complete all as shown in drg and as directed by Engineer-in-Charge

STEEL SINGLE BUNK COMPLETE 1890X800x450 & 2000X815MM WITH STEEL FRAME WITH SHOE RACK : Replacement of unserviceable/demaged plywood top with from its position with new plywood top position with new plywood top 1890mmx800mm & 200X815mmx12mm thick, BWR grade as shown in drawing, complete all as specified and directed by the Engineer-in-Charge Make : Kit ply/National Bhutan/Nova pan

Materials and labour for welding to damaged/decayed frame of shoe rack steel complete all as directed by Engineer-in-Charge.

M&L for replacement of unserviceable cushion with new foam cushion of 32 density, 50mm thick x 1890 mm x 800 mm & 200X815MM covered with high quality cloured rexzine shown in drawing, complete all as specified and directed by Engr -in-Charge (Make-Sleep Well/Kurlon)

PEG TABLE : Replacement of old unserviceable /damaged top of table peg with new top made of pre-laminated particle board of size 0.45m x 0.30m one side teak face exterior grade BWR 18mm thick duly covered with 4mm thick teak wood beading all around the top including polishing of the table complete all as shown in drg and as directed by Engineer-in-Charge. Make : Kit ply/National Bhutan/Nova pan

PAINTING OF STEEL FURNITURE : Painting of following steel furniture items by providing two coats of synthetic enameled paint of OG/Black/Silver/Smoke Gray to match with existing shade with spray gun after properly smoothing the surface with sand paper and applying putty and primer including minor welding/denting etc where necessary all as directed by Engineer-in-charge :- Rack steel 1.2X1.8X0.4MM

Steel Locker (770X600X950MM,770X600X450MM , 800X600X450MM & Locker Bed side

Steel Double Bunk Complete 1890X800x1730 & 1890X800X1580MM

Steel Sleeping bunk 1890X800x450 & 2000X815MM

Shoe rack Steel

Almiraha/Med Steel With Shalves/ 1/2 handing 1/2 Shalves & Almiraha of Size 1.8MX1.2MX0.4M

Office table steel 1.2x75x77M

Office table steel 1.5x90x77M

STEEL RACK 1.2x1.8X0.4MM : Supply and fixing of shelves made of 1mm thick PBI sheet made to shape as per drg and directed by Engr-in- charge.

Cleaning & preparing surface for Gas welding of the broken of any steel furniture. Welding shall be done in best trade practice and running welding upto 100 mm shall be treated one point all as specified and directed.by Engineer-in-charge.

Supply and fixing of nuts and bolts of shelves to fix with angle iron where required as per drg and directed by Engr-in- charge.

SOFA SET 5 SEATER & 4SEATER : M&L for replacement of unserviceable cushion with new seat cushion of foam density of 32 Kg/cum, 100 mm thick x 530 mm x 560 mm covered with tapestry cloth colored directed by Engr -in-Charge (Make-Sleep Well/Kurlon

PACHNANDA BUILDERS (BID ID -3387469)