Providing Electricity Connection to the Wet Waste Processing Unit MRF and SLF Units At the Solid Waste Management Unit Land and Installing 2 Mini High mask installation for lighting

Providing Electricity Connection to the Wet Waste Processing Unit MRF and SLF Units At the Solid Waste Management Unit Land and Installing 2 Mini High mask installation for lighting

Supply, Erection testing and commissioningof AMF panel suitable for.kVADG set. The panel isofcubicaltypebase/floor mounting control panel with hinge ddoors, undrilled bottom gland plate, aluminium Bus...

Fixing all types and all capacities of fluorescent / false ceiling / spot light / CFL / LED fittings indoor on the wall / ceiling /rafters / girders using 23/0.0076” twin twisted PVC insulated wires...

Supplying PVC flexible conduit pipe.mmdia fixing on surface overinverted tapered wooden plugs or phill plugsorrawl plugs and clamped usingheavy gaugesaddles ataninterval of300mm using NFscrews and on ...

Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming toIS8130-1984and(Virgin)PVC insulation sheathed suitable for working v...

Supply of LED floodlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polyca...

Supplying and fixing of solar Lux level street light control switch three phase including suitable capacity contactor. As Per (As Per PWD Ele SR 2-23-24 P.NO. 21 I.NO. 5.50.1) 5KW

Supplying and Installation / Fixing /Provision of Pole Box with HRC Fuse / MCB Provision and suitable connector / terminals for 3 Phase / 1 Phase connections with loop-In & Loop-Out terminals for 10 s...

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...

Supplying of 1.1 KV LT UG cable XLPE or heat registant PVC insulated, PVC extruded inner sheathe or armoured UG LT Cable as per IS-1554 ( Part-01) or IS-7098 Part-01 armouring Strip thikness in averag...

Supplying of 1.1 KV LT UG cable XLPE or heat registant PVC insulated, PVC extruded inner sheathe or armoured UG LT Cable as per IS-1554 ( Part-01) or IS-7098 Part-01 armouring Strip thikness in averag...

Labour charges for laying of 1.1 kv class UG cable in existing trench GI pipe / stoneware pipe / on wall / on pole as required. In existing trench / duct. 25 sqmm to 75 sqmm … incluidng cost of all ...

Labour charges for laying of 1.1 kv class UG cable in existing trench GI pipe / stoneware pipe / on wall / on pole as required. In existing trench / duct. 25 sqmm to 75 sqmm … incluidng cost of all ...

LT Feeder Piller Box (MS & Thermoset Plastic) 8 Way with Poreclain Rewireable Cutout and & 1 No of 630 Amps Load Break Switch with Copper Busbar as per IS-13947 Part-1&2(Refer Dwg No. BESCOM/GM/QS&S/4...

Earth work excavation for foundation of buildings water supply, sanitary lines and electrical conduits either in pits or in trenches 1.5m and above in width, in Ordinary soil not exceeding 1.5m. in de...

KSRB 2.4: Refilling available earth around Pipelines, Cables, in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering after watering with lead upto 50 m, and...

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...

Earthing: Supplying , fixing and wiring earth electrode for grounding conduits, IC cutouts and other equipments on the meter board using 40 mm dia 2.90 mm thick G.I Pipe 2.50 Mtrs Long Burried in a pi...

Suppying and fixing PBBC bakelite stright or slant bateen holder and wiring with 60w/230 volts lamps. page No.20, Item no:4.2, As Per Pwd SR 2014-15

Supplying and flush mounting powdercoated/galvanized metal boxsuitablefor mounting modular switch plates.Thebox shouldbe firmly flush mounted after due groove cutting in Brick/Stone/C.C wall PWD Ele S...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall (...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

Supplying 6A flush type socket and 6 amps flush type SP switch either surface/flush mounting in existing gang box or in 4mm thick plastic sheet and fixing over a flush mounted wooden box and wiring us...

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293 (PWD Ele SR 2-23-24 P no 8 I no. 3.1.2) 6A 3/5 Way socket

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. PWD Ele SR 2-23-24 P no 9 I no. 3.6.7)16A One Way Switch

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. PWD Ele SR 2-23-24 P no 9 I no. 3.6.10 )6/16A Universal Socket

Fabrication, Supplying, Erection, Testing and Commissioning of . ms long Polygon high mast with Single/Multiple telescopic sections having, (minimum overlap distance of 1.5 times of top section) thick...

Supply of LED floodlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polyca...

Supplying of 1.1 KV LT UG cable XLPE or heat registant PVC insulated, PVC extruded inner sheathe or armoured UG LT Cable as per IS-1554 ( Part-01) or IS-7098 Part-01 armouring Strip thikness in averag...

Labour charges for laying of 1.1 kv class UG cable in existing trench GI pipe / stoneware pipe / on wall / on pole as required. In existing trench / duct. 25 sqmm to 75 sqmm … incluidng cost of all ...

Earth work excavation for foundation of buildings water supply, sanitary lines and electrical conduits either in pits or in trenches 1.5m and above in width, in Ordinary soil not exceeding 1.5m. in de...

Refilling available earth around Pipelines, Cables, in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering after watering with lead upto 50 m, and lift upto...

Supplying, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and ...

Earthing: Supplying , fixing and wiring earth electrode for grounding conduits, IC cutouts and other equipments on the meter board using 40 mm dia 2.90 mm thick G.I Pipe 2.50 Mtrs Long Burried in a pi...

Supplying and fixing of solar Lux level street light control switch three phase including suitable capacity contactor. As Per (As Per PWD Ele SR 2-23-24 P.NO. 21 I.NO. 5.50.1) 5KW

Earth work excavation for foundation of buildings water supply, sanitary lines and electrical conduits either in pits or in trenches 1.5m and above in width, in Ordinary soil not exceeding 1.5m. in de...

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

Supplying, fitting and placing TMT FE 550/550D Steel Reinforcement Including Cost Of all materials Machinery For Foundations of Bridges , Material, Labour for cutting, bending, shifting to site, tying...

Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixe...

KSRB 4-6.4:Providing and removing centering, shuttering, strutting propping etc., and removal of form work for vertical surface such as walls at any thickness, including attached pilasters, buttersses...