SPECIAL REPAIRS TO BLDG NO SP 1A ABNS LINE INF OFFRS MESS ,JUNIOR LEADERS WING ,THE INF SCHOOL ,BELGAVI UNDER GE BELGAUM

Amount

Dismantling asbestos cement (corrugated,semicorrugated, translucent etc.) sheets in roof coverings and taken as credit complete all as specified and as directed.

Dismantling single layer Mangalore pattern or similar tiles in roofing and removing rubbish off the premises and old unserviceable tiles taken as credit completer. all as specified and as directed.

Dismantling battens for tiles, shingles etc of any size including tilting fillets spaced exc 15 cm and removing rubbish off the premises and old unserviceable timber battens of any description and taken as credit complete. all as specified and as directed.

Material and labour for Cement Concrete Eterna Fiery Red (Plain red) tiles of size 420mm x 330mm x 12 mm thick tiles in roofing. Interlocking at side joints laid dry . complete all as specified and as directed . Note : Make of Tile : Pioneer/ Monier

Material and labour for Second class hard wood plain fillets rectangular in section wrought secured with screw sectional area exceeding 13 and not exceeding 25 Sqcm complete all as specified and as directed.

Dismantling timber scantling 40 Sqcm and over in section, in any position for unframed work and removing rubbish off the premises and old unserviceable timber scantlings of any description taken as credit complete. all as specified and as directed.

Material and labour for 2nd class hard wood timber scantling clean sawn and fixed complete all as specified and as directed.

Description all as per item no :7 here in before but except timber

Material and labour for Preparing surfaces of wood ,new or old of any description and girth and treated with two coat of creosote oil complete all as specified and as directed.

Supply and fix Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick(TFT) of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as in roof covering completec all as specified and as directed.Note:Make of Galvalume sheet:Tata Blue scope Ltd/Jindal (Colouron)/Llyod

Supply and fix Pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick (TFT) of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, ridge,valley gutter fixed with self tapping screws and washers completec all as specified and as directed..Note:Make of Galvalume sheet:Tata Blue scope Ltd/Jindal (Colouron)/Llyod

Supply and fix Rolled mild steel roof trusses trussed purlins, rafters, struts (beam, tee, angle channel or flat sections ) including distance pieces, cleats etc. confirming to grade Fe 410-W ( Gde E - 250 ) quality 'A' including dismantling structural steel work doors, gates etc. and taken as credit complete all as specified and as directed .

Supply and fix Rolled mild steel frame work such as grills, gratings etc. With ends of bar shouldered and / or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed labusters, walk ways, railings, framewok of water tanks and similar work con-forming to FE 290. Gde-E-165including dismantling structural steel work doors, gates but excluding framed truss etc. complete all as specified and as directed .

Supply and fix Mild Steel work as in wind ties for roof including securing bolts and cutting tops to shape etc. conforming to Fe-290 Gde E-165 complete all as specified and as directed

Material and labour for Providing cement concrete 1:3:6 type C1 (Using 20mm graded aggregate in coping/bed plates etc including necessary steel form work complete all as specified and as directed

Material and labour for Preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of zinc chrome red oxide primer complete all as specified and as directed.

Taking down eaves gutter pipes,rain water pipes (of any size and pattern) including fittings,head shoes,bends,swan neck etc and taken as credit complete all as specified and as directed .

Supply and fix PVC (SWR) eaves gutter Half Square/Half Round profile 150mm bore including pipe accessories PVC holder bats , bolts nuts etc complete all as specified and as directed.Note : Make of PVC eaves gutter :Finolex/Supreme/Prince

Demolition/breaking up or down PVC /Ac/CI/Cement drain pipe any size fixed in any position including removal of debris off the premises complete all as specified and as directed.

Supply and fix 110 mm dia PVC (SWR) pipes single socketed in any length fixed to wall and jointed with solvent cement complete all as specified and as directed..Note : Make : Finolex/Supreme/Prince (ISI MARKED)

Supply and fix 110 mm dia PVC (SWR) bend any radius with access door complete all as specified and directed. .Note : Make : Finolex/Supreme/Prince (ISI MARKED)

Material and labour for High pressure steam cured (HPSC) non asbestos fibre cement building board with white/coloured and decorative surface finish 4mm thick in false ceiling fixed with aluminum anodized snap grid of 60x60cm in ceiling with Tee section 35x25x1.25mm, L angle section25x25x1.25mm thick including 2mm dia GI hanging wire including all hanger fittings etc and applying three coats of white wash on ceiling board complete all as specified and as directed . Note : (i) Make of HPSC Board : EVEREST /ARMSTRONG (ii) Thickness of aluminium anodisation shall be of 15 microns . (iii) Make of aluminium anodised section : Jindal/Indal/Hindalco .

Supply and fix PVC insulation panel of 10mm thick with EPS stuck to 1 mm plain PVC sheet suitably placed in false ceiling grid made of Aluminium/G.I/M.S as per specification and drawing including dismantling of existing false ceiling and wall boards or insulation board any thickness including cover fillets etc and taken as credit complete all as specified and as directed.Note :Make of PVC panel : M/S Rajshree Plasti wood Industries Ltd , Indore ,MP/M/S Accusel/M/S Sintex

Material and labour for Providing and fixing 10 thick Plaster of paris ceiling (Gypsum anhydrous) to flat surface over 2nd class soft wood fillets, or metal frame work and reinforced with G.I. wire mesh fixed in ceiling flat or sloping with anodised aluminium snap grid frame work for flase ceiling of size of gride 605 x605 mm and applying two coat of distemper oil emulsion on surface of ceiling including dismantling ceiling and wall board or insulation board of any thickness including cover filets etc and joints filled with plaster of paris, putty including POP work/Cornices etc and old unserviceable ceiling board and wood fillets taken as credit complete all as specified and as direcetd.

Material and labour for Pre-cast cement concrete solid block masonry, exc 10cm width, blocks cast in PCC 1:3:6 type C1, using 20mm graded stone aggregate, set in CM 1:6, including demolition of PCC solid block masonry built in cement mortar pillars, etc. in any position below or above ground level etc, and remopval of debris off the premises complete all as specified and as directed.

Taking down cement plaster on brick or stone walls built in cement mortar including raking out joints ,hacking for key ,scrubbing down with water etc complete all as specified and as directed.

Material and labour for Rendering 10mm thick in CM 1:6 on stone masonry surface and finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for Rendering 10mm thick in CM 1:6 on PCC block masonry surface and finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for Rendering 5mm thick in cement mortar 1: 4 mixed with water proofing compound over 10mm thick in cement mortar 1:6 on fair faces of brick work or stone masonry surfaces finished even and smooth without using extra cement, on external wall surfaces complete all as specified and as directed .

Material and labour for Rendering 5mm thick in cement mortar 1: 4 mixed with water proofing compound over 10mm thick in cement mortar 1:6 on other than fair faces of stone masonry surfaces finished even and smooth without using extra cement, on external wall surfaces complete all as specified and as directed .

Supply only integral water proofing compound Note :Make :Impermo/Roff/Cico

Material and labour for Preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper over a coat of primer with alkali resistant priming paint over a preparatory coat of 1 mm thick wall care putty on wall complete all as specified and as directed

Material and labour for Preperation of newly plastered surfaces of wall and brooming down and appyling two coats of exterior emulsion paint( APEX Ultima From Asian Paint )over a coat of water based primer on wall complete all as specified and as directed.

Material and labour for Complete removal of existing treatment on wall with wire brushing ,scrapping down smoke soot ,mould, moss and efflorescent salts, trading oil and greasy spots and applying two coats of oil bound distemperover a coat of primer with alkali resistant priming paint over a preparatory coat of 1 mm thick wall care putty on wall complete all as specified and as directed

Material and labour for Complete removal of old plastered/unplastered surfaces of wall and brooming down and appyling two coats of exterior emulsion paint ( APEX Ultima From Asian Paint ) over a coat of water based primer on wall complete all as specified and as directed.

Demolition of cement concrete (un-reinforced) in ground floor and paving not exceeding 15cm thick above or below ground level including removal of debris off the premises complete all as specified and as directed.

Dismantling floor hearth or wall tiling including cement mortar bedding ( but not backing)and removal of rubbish off the premises complete all as specified and as directed.

Material and labour for Premium quality Non-skid joint free coloured ceramic tiles 7 to 8mm thick area of each tile exceeding 0.11 Sqm but not exceeding 0.18 sqm in floors, etc. set and jointed in neat cement slurry and pointed in white cement mixed with colouring pigments to match with the shade of the tile laid over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and as directed. Note : Make of Ceramic tile : HRJohnson/Naveen/Somany

Material and labour for Premium quality Coloured Glazed ceramic tiles of size 350x250x 7 mm/ 450x 350x7 mm thick in vertical surface viz: skirting and dado etc set and jointed in neat cement slurry and pointed in white or coloured in skirting/dado laid over and including rendering 10 mm thick in CM 1:4 on brick masonry walls as in backing coat of skirting, dado etccomplete all as specified and as directed . Note : Make of Glazed Ceramic tile :Johnson/Naveen/Somany

Material and labour for Vitrified Ceramic tile of 10 mm thick (square/ rectagular) polished,area of each tiles not exceeding 0.36 sqm in floor/skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tile over screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM 1:6 complete all as specified and as directed.Note : Make of Vitrified Ceramic tile :Johnson/Naveen/Somany

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc.laid dry and pointed and removal of debris off the premises complete all as specified and as directed

Material and labour for 20 mm thick Granite work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms/ wash basin platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including 15mm thick screed bed in CM 1:6 complete all as specified and as directed.

Material and labour for Granite work in dado or skirting of 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement and admixture of pigment to match the shade of granite stone incl grinding and polishing complete including backing coat in CM 1:4, 10mm thick complete all as specified and as directed.

Material and labour for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM 1:6 complete all as specified and as directed .

Material and labour for Machine cut Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over rendering 10mm thick in cement morter 1:4 on other than fair faces of brick work or stone masonry surfaces in backing coat of skirting, dado etc,complete all as specified and as directed

Material and labour for Providing PCC 1:3:6 type C2 (using 40mm graded stone aggregate) as in plinth protection 75 mm thick finished even and smooth without using extra cement including necessary steel form work complete all as specified and as directed.

Taking down Chowkhats or frames exc 1.5 sq. m but n exc 4 sq. m each with shutters, making good cill, jambs etc to match with the existing surface (without taking off shutters from the frames) and taken as credit complete all as specified and directed.

Taking down Chowkhats or frames not exc. 1.5 sq. m each with shutters, making good cill, jambs etc to match with the existing surface (without taking off shutters from the frames) and taken as credit complete all as specified and directed.

Supply and fixing factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed and one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multichambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc.

Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made complete all as specified and as directed. Note :Make of UPVC Sliding window : M/S Rajshree Plasti wood Industries Ltd , Indore ,MP/M/S Accusel/M/S Sintex

Supply and fixing factory made uPVC white colour Casement door with 3D hinges made of (big series) frame 67 x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door upto 2.00 sqm) comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws,etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc.

After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality complete all as specified and directed by Engineer-in-Charge. (Glass shall be paid separately) Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. indepth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.complete all as specified and as directed. Note :Make of UPVC Sliding window : M/S Rajshree Plasti wood Industries Ltd , Indore ,MP/M/S Accusel/M/S Sintex

Supply and fixing factory made uPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc.Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including

drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Glass shall be paid separately). Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. complete all as specified and as directed . . Note :Make of UPVC Sliding window : M/S Rajshree Plasti wood Industries Ltd , Indore ,MP/M/S Accusel/M/S Sintex

Supply and fix Second class hard wood plain solid straight chowkat or frame rebated on the solid, wrought, framed rounded or chamfered put together with glue pinned at joints fixed in position complete all as specified and as directed.

Supply and fix Factory made 35 mm thick second class hard wood, Plain framed, panelled shutter with lock rail and panel of 12mm thick veneered particle board ,medium density with commercial face veneers on both faces with size of rails and stiles sizes of members of shutters as specified in SSR Part I, Section 8. Clause 8.24 (a) and fitted to chowkats complete all as specified and as directed.

Supply and fix Factory made 35 mm thick second class hard wood, glazed and skelton shutters open rebated and prepared to receive glass gauze etc edges of framing plain ,chamfered or rounded , fitted with cut and mitred beads rebated sash bars any numbers for securing gauze etc divided into squares , size of members of shutters as specified in SSR Part-I section 8 caluse 8.24(a) complete all as specified and as directed.

Description all as item No 54 here in before but if window,ventilator etc are provided with stiles and rails as specified in SSR Part-I section 8 caluse 8.24(b) complete all as specified and as directed .

Material and labour for Preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

Material and labour for Preparation of old wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed..

Supply and fix Stainless steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm fixed with tinned tack or galvanised wire staples complete all as specified and as directed .

Supply and fix in repair Stainless steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm fixed with tinned tack or galvanised wire staples complete all as specified and as directed .

Supply and fix MS butt hinges cold rolled medium weight 100mm size complete all as specified and as directed..(ISI MARKED)

Supply and fix MS butt hinges cold rolled medium weight 75 mm size complete all as specified and as directed..(ISI MARKED)

Supply and fix Helical door spring MS 300mm long ordinary rat tail pattern spring including roller and roller plate complete fixed to wooden/steel chowkats complete all as specified and as directed. .(ISI MARKED)

Supply and fix 100mm long extruded section aluminium alloy anodised handles fabricated typecomplete all as specified and as directed. Make :Classic/Crown/Adarsh . .(ISI MARKED)

Supply and fix 150mm long extruded section aluminium alloy anodised handles fabricated typecomplete all as specified and as directed. Make :Classic/Crown/Adarsh . .(ISI MARKED)

Supply and fix Aluminium anodised barrel tower bolt of extruded section of size 150mm long complete all as specified and as directed Make :Classic/Crown/Adarsh . .(ISI MARKED)

Supply and fix Aluminium anodised barrel tower bolt of extruded section of size 100mm long complete all as specified and as directed Make :Classic/Crown/Adarsh . .(ISI MARKED)

Supply and fix Aluminium alloy anodised sliding door bolt 300mm long with hasp and staple (Bolt type) and fixing clips of sheet cast or extruded section of cast aluminium alloy complete all as specified and as directed. Note : Make of Aluminium anodised sliding door bolt : Classic/Crown/Adarsh . .(ISI MARKED)

Hacking out old broken glass (any thickness/size, quality or description) from wooden frames, glazed with putty or fixed with beads and removal of debris off the premises complete all as specified and as directed .

Supply and fix 4 mm thick sheet glass ordinary quality and glazing with oil putty in squares n exc 0.5 Sqm in each pane complete all as specified and as directed. Note : Make of Glass : saint gobain/Modi guard/Gold fish

Supply and fix Sink with drainage board made of stainless steel 1mm thick kitchen with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm including taking down of kitchen sink of any description and type and making good disturbed surface complete all as specified and as directed.Note :Make of Sink :Nirali/Blue Star/Joyna

Taking down pipe of 15 mm bore of any description and taken as credit complete all as specified and as directed.

Taking down pipe of 20 mm bore of any description and taken as credit complete all as specified and as directed.

Cutting , chases for connection water tubing and making good in CM 1:3 cutting not exceeding 10cm grith in PCC concrete block or slab wall complete all as specified and as directed.

Supply and fix Unplasticised PVC (UPVC) pipe 25mm bore of pressure rating 10 Kgf/cm2 with all fittings and fixed complete to walls, ceilings or laid in floors complete all as specified and as directed. Note :Make :Finolex/Supreme/Prince (ISI MARKED)

Supply and fix Unplasticised PVC (UPVC) pipe 20mm bore of pressure rating 10 Kgf/cm2 with all fittings and fixed complete to walls, ceilings or laid in floors complete all as specified and as directed. Note :Make :Finolex/Supreme/Prince (ISI MARKED)

Supply and fix in repairs vitreous china wash down water closet pan (pedestal pattern) white ,cascade model with Syphonic action type low level PVC flushing cistern, 10 litres capacity, white, with inlet, ball valve, float, handle and flush pipe including brackets and connections to pipe complete all as specified and as directed Note: MAKE ; HINDWARE/CERA/JOHNSON

Supply and fix PVC connections 15 mm size with PTMT nuts 600mm long completeall as specified and as directed. Note :Make : Prayag /M/S Shakthi Industries

Supply and fix PVC connections 15 mm size with PTMT nuts 450mm long completeall as specified and as directed. Note :Make : Prayag /M/S Shakthi Industries

Supply and fix in repair CP Brass Single lever high flow diverter concealed body 3 inlet with button assembley, cartridge sleeve but without exposed parts screwed down for 15 mm bore UPVC pipe complete all as specified and as directed . Make Jaquar /Hindware/Marc( Sample as approved by Garrison Engineer).

Supply and fix in repair CP BrassSingle lever 3- inlet divertor eposed parts kit consisting of operating lever, wall flange and button complete all as specified and as directed . Make Jaquar /Hindware/Marc( Sample as approved by Garrison Engineer).

Supply and fix in repair CP brass spout operated bib tab with wall flange complete all as specified and as directed . Make Jaquar /Hindware/Marc (Sample as approved by Garrison Engineer)

Supply and fix in repair Stop valve fancy type brass chromium plated with long shank and cup (conceald type) screwed both ends for 15mm bore GI pipe or for union complete all as specified and as directed . Make Jaquar /Hindware/Marc ( Sample as approved by Garrison Engineer).

Supply and fix in repair Brass chromium plated overhead shower of size 150x150mm with shower arm 450mm long with flange, with swivel joints, any size fixed to 15mm bore uPVC pipe fixed in repairs complete all as specified and as directed . Make Jaquar /Hindware/Marc ( Sample as approved by Garrison Engineer).

Supply and fix in repair Corner glass shelf 5mm thick 9'' wide fixed with suitable mild steel CP brackets nuts & bolts fixed in repair complete all as specified and as directed . Make Jaquar /Hindware/Marc ( Sample as approved by Garrison Engineer).

Supply and fix in repair Table top wash basin Vitreous China of size (600mmx450mmx150mm) Square Including cutting for and pinning in ends of brackets or erecting stand bottle trap stainless steel etc. complete all as specified and as directed . Make Jaquar /Hindware/Marc ( Sample as approved by Garrison Engineer).

Supply and fix in repairs 2 way Pillar cock single lever of 450mm long fancy type cast copper alloy with capstan heads chromium plated screwed down high pressure with 'Hot' or 'Cold' with long screwed shanks complete all as specified and as directed . Make Jaquar /Hindware/Marc ( Sample as approved by Garrison Engineer).

Supply and fix Brass chromium plated toilet paper holder fixed to wall with chromium plated brass screws complete all as specified and as directed . Make Jaquar /Hindware/Marc ( Sample as approved by Garrison Engineer).

Supply and fix in repairs Soap dish vitreous china white/Stainless steel of size 160mmx260mm x90mm fixed with plug with chromium plated brass screws (for bath of 3 cubical in each toilets) complete all as specified and as directed . Make Jaquar /Hindware/Marc ( Sample as approved by Garrison Engineer).

Supply and fix15 mm bore Bib tap brass chromium plated fancy type with crutch or butter-fly handle, screwed down , screwed for iron pipe or for brass ferrule etc complete all as specified and as directed . Make Jaquar /Hindware/Marc ( Sample as approved by Garrison Engineer).

Supply and fix Health faucet brass chromium plated with 1metre long flexible PVC tube and wall hook complete all as specified and as directed . Make Jaquar /Hindware/Marc ( Sample as approved by Garrison Engineer).

Supply and fix Tubular towel rod 600mm brass chromium plated fixed to walls with plugs and chromium plated brass screws complete all as specified and as directed . Make Jaquar cat No :CAN-CHIR-1111N or equivalent price and specification of Hindware/Marc ( Sample as approved by Garrison Engineer).

Supply and fix 15 mm bore 2 way Bib tap brass chromium plated fancy type with crutch or butter- fly handle screwed down screwed for iron pipe or for brass ferrule etc complete all as specified and as directed . Make Jaquar /Hindware/Marc ( Sample as approved by Garrison Engineer).

Material and labour for PVC (SWR) nahani/floor trap plain with grating of 75mm dia outlet including jointing with solvent cement complete all as specified and as directed. Note :Make :Finolex/Supreme/Prince (ISI MARKED)

Supply and fix Liquid soap container of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (Minimum weight 105 gms) for WHB complete all as specified and as directed . Make : Prayag/M/S Shakthi Industries

Supply and fix 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches including dismantling old damaged existing pipe line of any description and taken as credit complete all as specified and as directed. Note :Make of UPVC Pipe :Finolex/Supreme/Prince (ISI MARKED)

Supply and fix 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified and as directed. Note :Make of UPVC Pipe :Finolex/Supreme/Prince (ISI MARKED)

Supply and fix 110mm bore PVC (SWR) bends any radius with access door complete all as specified and as directed. Note :Make of UPVC Pipe :Finolex/Supreme/Prince (ISI MARKED)

Supply and fix 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified and as directed. Note :Make of UPVC Pipe :Finolex/Supreme/Prince (ISI MARKED)

Supply and fix 75mm bore PVC (SWR) bend any radius with access door complete all as specified and as directed. Note :Make of UPVC Pipe :Finolex/Supreme/Prince (ISI MARKED)

Material and labour for PVC (SWR) gully trap 125/110mm setting and jointing with solvent cement complete all as specified and as directed. Note :Make of PVC Gully trap :Finolex/Supreme/Prince (ISI MARKED)

Material and labour for Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design and pattern as in footparth, park, lawn, drive ways or light traffic parking etc., of required strength, thickness and size/shape, made by table vibratory method using PU mould, laid in required colour and pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver block into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand etc, complete all as specified and as directed

Supply and fix 5.5mm thick sheet glass ordinary quality and glazing with oil putty in square of area exc 0.5 Sqm in each pane complete all as specified and as directed.Note :Make of Glass: Saint gobain/Modi Guard/Gold Fish

Supply and fix 10 mm thick clear toughened glass , superior quality and glazing with oil putty in square of area exc 0.5 Sqm in each pane with fixing including stainless steel hardware etc complete all as specified and as directed . .Note :Make of Glass: Saint gobain/Modi Guard/Gold Fish

Material and labour for PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in foundation filling and mass concrete completeall as specified and as directed.

Material and labour for Providing Cement concrete type B1 1:2:4, using20 mm graded stone aggregate of 50 mm thick as in surface channel and drain including necessary steel form work completeall as specified and as directed.

Supply and fix in repair 600mm dia Wind operated air circulating roof ventilator, aluminium body, made of 0.5mm thick aluminium sheet, stainless steel shaft, double shielded self lubricating ball bearings, dia of turbine 760mm, dia of neck 610mm, height 460mm 42 vanes, with profile suitable for fixing with Galvalume roof sheet including necessary fixing bolts etc, complete all as specified and as directed.Note :Make FRY AIR

Supply and fix 10mm thick Chrome finished tempered/toughened glass corner shower enclosure with two fixed glass and openable door fixed on the side panel 3 part (approx dimensions 1.95m (heightt) and 1.4+1.7=3.1m (width) (for each bath room) with all connected accessories like floor door machine, rubber gasket, fixing clips, screws/bolts, handles, stoppers, hinges etc as shown in Catalogue No 1840-L/1140-l of Jaquar (Code JSE-CHR-840L2832H19X), or equivalent model in Saint Gobian, Kohler including taking down of existing shower enclosuer system of any description and type and making good disturbed surfaces to match with the existing surface complete all as specified and as directed.

Dismantling wall or ceiling boards or insulation boards/ slab any thickness fixed with nails including cover fillets and taken as credit complete all as specified and as directed .

Material and labour for 3mm thick Aluminium composite panel comprising of a core containing not less than 70% non combustible mineral filling sandwiched between two skins of 0.5mm thick alluminium alloy PERALUMAN-100 (AIMG1-NS41) complete with all necessary sub-structures, anchors,hardware and fittings to provide a total installation, fixed to existing wooden / steel members with necessary frame work with screwing and scaffolding including dismantling old un serviceable panel board of any description and taken as credit complete all as specified and as directed. Note: (i)Measurement shall be taken flat as fixed without any allowance for laps, etc.(ii) Make of Aluminium Composit Panel: Alstrong/ Aludecor/ Alucobond/ Euroband

Material and labour for Particle board,18/19 mm thick medium density, flat pressed, single layer type or three layer type with BWR type adhesive, fixed with screws to timber frame work as in cub board shelves/cabinet works complete all as specified and as directed. Note :Make :KitPly/Green Ply/Century Ply

Material and labour for Decorative laminate type 1 of thickness 1.5mm of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and as directed. (Sample as approved by Garrison Engineer). Note :Make :Decolam/

Material and labour for Prelaminated particle board 18/19 mm thick, interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws as in cub board shelves/cabinet works complete all as specified and as directed. Note :Make :KitPly/Green Ply/Century Ply

Supply and fix in repair Heavy duty Stainless steel sliding door roller hanging pulley hanging mute rail wheel balcony sliding 8 wheels (ISI Marked) Gde -I quality complete all as specified and as directed.(Sample as approved by Garrison Engineer).

Supply and fix in repair Heavy duty Concealed Sliding Wardrobe handles size 8" x 1.5" Stainless steel Matt colour (ISI Marked) Gde -I quality complete all as specified and as directed.(Sample as approved by Garrison Engineer).

Supply and fix in repair Heavy duty Stainless steel 5 ball bearing telescopic slide/drawer channels of any size (ISI Marked) Gde -I quality complete all as specified and as directed.(Sample as approved by Garrison Engineer).

Dismantling of old unserviceable submain wiring of aluminium conductor cable of siz 2.5 and 4 sq.mm and taken as credit complete all as specified and as directed.

Material and labour for Point wiring with 1.5 Sqmm size single core PVC insulated FRLS unsheathed 1100 volts grade copper conductor multi-stranded cable for phase and neutral drawn through in and including PVC casing capping of suitable size with all necessary fittings and provision of one run of Green coloured PVC insulated FRLS unsheathed 1100 volts grade copper conductor multi-stranded single core cable of size 1.5 sqmm and connected to common earth dolly including provision of suitable size of modular PVC surface box fixing on wall with and white colour cover plates for mounting modular type switches, sockets, fan regulators, bell pushes etc. for one light point controlled by one switch 1 way complete all as specified and as directed.NOTE. (i) Make of PVC cable :Finolex/Polycab/KEI (ii) Make of PVC casing and capping : Avon Plast/Presto plast /Garware

Description all as per item No. 118 here in before but for one fan point controlled by one switch and regulator.

Description all as per item No. 118 here in before but for one call bell point controlled by one bell push.

Description all as per item No. 118 here in before but for one exhaust fan controlled by one switch.

Description all as per item No. 118 here in before but for one light point controlled by two 2 way switch.

Description all as per item No. 118here in before but for one 05 amps socket outlet on independent board.

Description all as per item No. 118 here in before but for one 05 Amps socket outlet on the same board with other switches.

Description all as per item No 118 here in before but complete with 1100volt grade FRLS PVC insulated unsheathed multistranded wire with 2.5 sqmm copper cable ,single core and one run of FRLS PVC insulated unsheathed multistranded wire with 2.5 sqmm copper cable ,single core of upto earth dolly for 15 Amps socket outlet independent .

Material and labour for Point wiring with FRLS PVC insulated unsheathed electric cable confirming to IS:694,1100 V grade AC,single core having multistranded copper conductor of size 1.5 sqmm nominal cross sectional area for phase and neutral including non metallic rigid PVC conduit ISI marked medium grade not less than 20 mm dia with all conduit accessories in concealed wiring system and provision of FRLS PVC insulated unsheathed electric cable confirming to IS:694,1100 V grade AC,single core having multistranded copper conductor of size 1.5 sqmm connected to common earth dolly including provision of suitable size of modular metal surface box fixing in wall with and including white colour cover plates for mounting modular type switches, sockets, fan regulators, bell pushes etc for one light point controled by one 1 way switch complete all as specified and as directed.NOTE. (i) Make of PVC cable :Finolex/Polycab/KEI (ii) Make of PVC conduit : Avon Plast/Presto plast /Garware

Description all as per item No. 126 here in before but for one fan point controlled by one switch and regulator.

Description all as per item No. 126 here in before but for one exhaust fan controlled by one switch.

Description all as per item No. 126 here in before but for one call bell point controlled by one bell push.

Description all as per item No. 126 here in before but for one 3 pin socket outlet, on the same bord socket 5 Amps point.with other switches with cable of size 1.5 sqmm

Description all as per item No. 126 here in before but for one 3 pin socket outlet, for independent socket 5 Amps point.

Description all as per item No. 126 here in before for one light point controlled by two 2 way switches.

Description all as per item No 126 here in before but complete with 1100volt grade FRLS PVC insulated unsheathed multistranded wire with 2.5 sqmm copper cable ,single core and one run of FRLS PVC insulated unsheathed multistranded wire with 2.5 sqmm copper cable ,single core of upto earth dolly for 15 Amps socket outlet independent .

Supply and fix Modular switch type 6 Amps flush button 230 volts AC one way, complete all as specified and as directed. Make : Anchor (Roma) /Legrand/Indo Asian

Supply and fix Modular switch type 6 Amps flush button 230 volts AC two way, complete all as specified and as directed. Make : Anchor (Roma) /Legrand/Indo Asian

Supply and fix Modular bell push flush type 230V AC 6 Amps, 1 modulecomplete all as specified and as directed.Make : Anchor (Roma) /Legrand/Indo Asian

Supply and fix Modular switch type 16 Amps flush button 230 volts AC one way, complete all as specified and as directed. Make -Anchor (Roma) /Legrand/Indo Asian

Supply and fix in repairs Modular socket outlet 6 Amps 2/3 pin combined flush type multipurpose 2 module, complete all as specified and as directed. Make : Anchor (Roma) /Legrand/Indo Asian

Supply and fix in repairs Modular socket outlet 6/16 Amps 2/3 pin combined flush type multipurpose 2 module complete all as specified and as directed. Make : Anchor (Roma) /Legrand/Indo Asian

Supply and fix in repairs Modular electronic type fan regulator 230 V , 120 watt step type, 2 module complete all as specified and as directed . Make : Anchor/Legrand/Rider

Supply and fix in repairs PVC /Poly carbonate Ceiling rose surface bakelite of size 63.5 x 20 mm, three terminals complete all as specified and as directed . Make : Anchor/ Cona / Havells

Supply and fix call bell, ding dong,230V AC supply complete all as specified and as directed. Make : Anchor/ Cona / Rider

Material and labour for Sub main wiring with 2 runs of single coreFRLS PVC insulated unsheathed multi-stranded copper conductor cables of size 1.50 Sq mm drawn through in and including PVC conduit in ivory/Grey/white colour ,medium grade with all necessary fittings fixed in wall/ceiling and Provn of one run of 1.50 sqmm FRLS PVC insulated unsheathed multistranded copper conductor double core cable for earth continuity and connected to common earth dolly complete all as specified and as directed. NOTE:(i) Two runs of 1.50sqmm and one run of 1.50 sqmm and one run of PVC conduit will be measured as one unit. (ii) Make of PVC cable :Finolex/Polycab/KEI (iii) Make of PVC conduit : Avon Plast/Presto plast /Garware

Material and labour for Sub main wiring with 2 runs of single coreFRLS PVC insulated unsheathed multi-stranded copper conductor cables of size 2.50 Sq mm drawn through in and including PVC conduit in ivory/Grey/white colour ,medium grade with all necessary fittings fixed in wall/ceiling and Provn of one run of 2.50 sqmm FRLS PVC insulated unsheathed multistranded copper conductor double core cable for earth continuity and connected to common earth dolly complete all as specified and as directed. NOTE:(i) Two runs of 2.50sqmm and one run of 2.50 sqmm and one run of PVC conduit will be measured as one unit. (ii) Make of PVC cable :Finolex/Polycab/KEI (iii) Make of PVC conduit : Avon Plast/Presto plast /Garware

Material and labour for Sub main wiring with 2 runs of single coreFRLS PVC insulated unsheathed multi-stranded copper conductor cables of size 4.00 Sq mm drawn through in and including PVC conduit in ivory/Grey/white colour ,medium grade with all necessary fittings fixed in wall/ceiling and Provn of one run of 4.00 sqmm FRLS PVC insulated unsheathed multistranded copper conductor double core cable for earth continuity and connected to common earth dolly complete all as specified and as directed. NOTE:(i) Two runs of 4.00sqmm and one run of 4.00 sqmm and one run of PVC conduit will be measured as one unit. (ii) Make of PVC cable :Finolex/Polycab/KEI (iii) Make of PVC conduit : Avon Plast/Presto plast /Garware

Material and labour for Sub main wiring with 2 runs of single coreFRLS PVC insulated unsheathed multi-stranded copper conductor cables of size 6.00 Sq mm drawn through in and including PVC conduit in ivory/Grey/white colour ,medium grade with all necessary fittings fixed in wall/ceiling and Provn of one run of 6.00 sqmm FRLS PVC insulated unsheathed multistranded copper conductor double core cable for earth continuity and connected to common earth dolly complete all as specified and as directed. NOTE:(i) Two runs of 6.00sqmm and one run of 6.00 sqmm and one run of PVC conduit will be measured as one unit. (ii) Make of PVC cable :Finolex/Polycab/KEI (iii) Make of PVC conduit : Avon Plast/Presto plast /Garware

Supply and fix inverter LED INTEGRATED BATTEN tube light fitting type 20 watt with square profile and polycarbonated channel ,Lithium ion battery with charging time 8 to 10 hours and back up time upto 4 hours complete with all accesories internally pre-wired and including connecting up with FRLS PVC twin core twisted flexible copper conductor cable with suitable size complete all as specified and as directed . Note : Make : Wipro cat part no WIPRO 20W LED Emergency Batten 4Ft OR equivalent in CG/Philips

Supply and fix in repairs LED INTEGRATED BATTEN T5 tube light fitting type 1x 9 /10 watt indoor decorative aluminium extruded T5 LED Battens-integrated type complete with all accesories internally pre-wired and including connecting up with twin core flexible FRLS PVC copper conductor cable of suitable size complete all as specified and as directed. Note : Make : Wipro cat part no Wipro Garnet 10W Emergency Batten OR equivalent in CG/Philips

Supply and Fix 1 feet LED 05 watts integrated type complete with all accesories internally pre-wired and including connecting up with twin core twisted flexibleFRLS PVC copper conductor cable with suitable size complete all as specified and as directed. Note : Make : Wipro cat part no Wipro Garnet 1 Feet 5-Watt LED Batten OR equivalent in CG/Philips

Supply and fix Exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers ,heavy duty , copper winding with necessary grouting and fixing arrangements and provision of 3 core flexible FRLS PVC copper conductor cable of size 1.5 sqmm size from ceiling rose to connector of exhaust fan complete all as specified and as directed. Note : Make:-Almonard /Crompton/Orient

Supply and fix Wall light lamp 9 watt LED Oval shaped Wall mounted light alongwith all accessories connecting up with twin core twisted flexible FRLS PVC copper cable of suitable size from point to lamp complete all as specified and as directed. Note : Make : Wipro cat part no WIPRO GARNET DW20927 9W INDOOR WALL LIGHTOR equivalent in CG/Philips

Supply and fix Hanging light lamp alongwith all accessories , decorative type ,surface mounted conical shape fixtures black/white 7.5 W LED flamenet lamp light connecting up with twin core twisted flexible FRLS PVC copper cable of suitable size from point to lamp complete all as specified and as directed. Note : Make : HAVELLS LHFXAGP1TN1K007 OR Equivalent in CG/Wipro

Supply and fix in repair LED Picture light 7 watts indoor type corded-electric indoor type metal synthetic model type of size 355 x 180 x 95 mm 3 k ,wall mounted energy efficient of Model in Philips 31402 LED picture light or equivalent in Wipro/CG including connecting up with twin core twisted flexible FRLS PVC copper cable of suitable size from point to lamp and fixing the fitting on suitable size of PVC / wooden round block complete all as specified and as directed .

Supply and fix in repair LED Spot light round type 5 watts grey/metal synthetic including connecting up with twin core twisted flexible FRLS PVC copper cable of suitable size from point to lamp and fixing the fitting on suitable size of PVC / wooden round block complete all as specified and as directed . Note : Make : Wipro cat part no Garnet 5W Compact COB Spotlight OR equivalent in CG/Philips

Supply and fix in repair LED luminaire of size 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up to driver with FRLS PVC three core flexible copper conductor cable of suitable size complete all as specified and as directed. Note : Make : Wipro cat part no ImmaculateLED 35W OR equivalent in CG/Philips

Supply and fix in repair LED luminaire 12/15 W , 220 V AC unique silmest recess cum surface panel type with high efficiency PMMA diffuser soft glare free light complete with driver, holders and LED lamp suitable for roof ceiling including connecting up driver with FRLS PVC three core flexible copper conductor cable of suitable size complete all as specified and as directed. Note : Make : Wipro Garnet 15W Square LED OR equivalent in CG/Philips

Supply and fix in repair LED luminaire 9 W orative ,wall mounting fixture in durable plastic and designer mesh in gold finish , 220 V AC dec unique silmest recess com surface panel tpe with high efficiency PMMA diffuser soft glare free light complete with driver, holder and LED lamp suitable for roof ceiling connecting up driver with FRLS PVC three core flexible copper conductor cable of suitable size complete all as specified and as directed. Note : Make : Havells LHFOECEE1TZ1B014 OR EQUIVALENT IN CG/PHILIPS

Supply and fix Integral LED 25 watts security light fitting comprising of pressure die cast aluminium housing with high power LEDs & electronic driver including GI pipe medium grade and bracket of suitable size fixed to pole /wall and connecting up driver with FRLS PVC three core flexible copper conductor cable of suitable size complete all as specified and as directed. Note : Make : Wipro cat part no Skyline Plus 25W OR equivalent in CG/Philips

Supply and fix in repair LED luminaire 12/15 W , 220 V AC unique silmest recess cum surface panel type with high efficiency PMMA diffuser soft glare free light complete with driver, holders and LED lamp suitable for roof ceiling including connecting up driver with FRLS PVC three core flexible copper conductor cable of suitable size complete all as specified and as directed. Note : Make : Wipro Garnet 15W Round LED OR equivalent in CG/Philips

Supply and fix in repairs Energy saving surface mounted, decorative oval bulk head edge-lit LED luminaire 10W, comprising of high brightness LEDs. comprising of high brightness LEDs complete with all accessories internally pre wired complete including provision of 10 Watts high brightness LEDs 6000K, suitable size wooden board with sunmica top and connecting up with FRLS PVC three core flexible copper conductor cable of suitable size from ceiling rose to connector block complete all as specified and directed Note : Make : Wipro cat part no wipro Garnet LED Bulkhead OR equivalent in CG/Philips.

Supply and fix Ceiling fan complete with blades, down rods of suitable length of 20 mm dia medium grade GI pipe from top to bottom, and accessories, 230 V, 1200 mm sweep, Minimum air delivery 210 CFM with service value 6.00 BEE 5 star rated with brush direct current motor (BLDC) including taking down existing unserviceable ceiling fan from the location and setting aside for fixing /deposting to MES store yard complete all as specifed and as directed . Note : Make:-Bajaj /Crompton/Orient

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250 mm with necessary grouting and fixing arrangements and provision of 3 core FRLS PVC flexible copper conductor cable of size 1.5 sqmm size from ceiling rose to connector of exhaust fan complete all as specified and directed .. Note : Make:-Almonard /Crompton/Orient

Supply and fix Exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers ,heavy duty , copper winding with necessary grouting and fixing arrangements and provision of 3 core flexible FRLS PVC copper conductor cable of size 1.5 sqmm size from ceiling rose to connector of exhaust fan complete all as specified and as directed. Note : Make:-Almonard /Crompton/Orient

Supply and fix Wall mounting fan 230 V single phase 400 mm sweep with all accessories fixed to wall with all necessary brackets ,bolts nuts etc including testing and making good disturbed surfaces complete all as specified and as directed . Note : Make:-Almonard /Crompton/Orient

Taking down existing MCB DB alongwith MCBs and old wooden boards and making good to disturbed surfaces.to match with the existing surface and old unserviceable MCB DB taken as credit complete all as specified and as directed.

Supply and fix Factory made epoxy powder coated distribution board double door TPN 8 ways (VTPN MCCB DB) with metal door (IP-43 protection) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, strandard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with Knockouts and suitable for one FP MCCB 100 Amps as incomer and SP/TP MCBs (or any combination of SP/TP MCBs ) outgoings complete all as specified and as directed.Note :Make :L&T/Indo Asian/Legrand

Supply and fix in replacement MCCB,4 pole ,125 Amps , 16 KA , C Series current rating conforming to IEC-609472 & IS-139473 to be fixed in distribution board complete all as specified and as directed..Note :Make :Indo Asian/L&T/Siemen

Supply and fix Factory made epoxy powder coated distribution board SPN 12 ways double door with acrylic top cover (IP-43 protection) fabricated from minimum 1.0 mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, strandard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plate with knockouts and suitable for one SPN MCB 32/40 Amps as incomer and 10 SP MCBs as outgoings complete all as specified & directed Make -:Indo Asian/L&T/Siemen

Supply and fix Factory made epoxy powder coated distribution board SPN 8 ways double door with acrylic top cover (IP-43 protection) fabricated from minimum 1.0 mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, strandard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plate with knockouts and suitable for one SPN MCB 32/40 Amps as incomer and 6 SP MCBs as outgoings complete all as specified and directed .Note :Make :Indo Asian/L&T/Siemen

Supply and fix amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of SPN 40 to 63 AMP following poles and current carrying capacity in the MCB DB complete all as specified and directed .Note :Make :Indo Asian/L&T/Siemen

Supply and fix MCB SP 240 Volt of capacity 6 to 40 Amps 10 KA‘C’ curve complete all as specified and as directed. .Note :Make :Indo Asian/L&T/Siemen

Material and labour for Earthing complete with galvanised earth plate electrode 600 mm x 600 mm x 6 mm thick, burried directly in ground in vertical position, earth pit not less than 2.25 Metre deep below ground level with top edge of the plate not less than 1.5 Metre below ground level connetced with galvanised iron earth lead wire of size 4 mm dia(Upto 7.50 metre length) by means of nuts, bolts, check nuts and washers made of galvanised iron or steel earthing lead protected by galvanised iron pipe 40 mm bore (medium grade) and other end connected to earthing test point or lightening arrestor or main controlling switch as directed including providing funnel with 20mm bore galvanised iron pipe (light grade), wire mesh, charcoal or coke and common salt in alternate layer of 15cm (compacted thickness) all round the earth electrode, concrete earth pit in PCC (1:3:6) type C-1 (with 20mm graded aggregate), 50mm thick precast RCC (1:2:4) cover slab (re-inforced with 8mm dia TMT bar @ 15 cm C/C bothways and suitable handle made of 10mm dia) including necessary excavation & earth work, returning filling and removal of surplus earth upto a distance not exceeding 50 Mtr etc all as shown on electrical plate No. 3 of MES Schedule Part-I complete to obtain less than 1 Ohm earth resistance, fiaxed in repairs complete all as specified and as directed.

Supply and fix Storage type electric water heater (vertical geyser) of 25 litres capacity, 5 star rating, 2000w fixed to wall with suitable bolts and nuts duly grouted including re-connecting the lectrical and water supply connection and testing complete all as specified and as directed. Make : Recold /Bajaj /Venus

Supply and fix PVC connection, ISI marked, 15mm dia 600mm long with brass nuts suitable for hot/ cold water supply complete all as specified and as directed.

Material and labour for Fancy type Stop valve of 15 mm dia, cast copper alloy, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed down, high pressure, screwed both ends for iron pipe complete all as specified and as directed. Make : Prayag/CERA/Johnson

Supplyind and laying CPVC pipes 16 mm outer dia , SDR 11 and Plain CPVC SDR 11 Fittings on walls/ceiling or laying in floors complete all as specified and as directed.Note : Make : Ashirwad/Astral

Description all as per item No. 176 here in before but of size 20 mm outer dia bore

Description all as per item No. 176 here in before but of size 25 mm outer dia bore

Material and labour for 1000 litres capacity Rotational moulded polyethylene (HDPE) water storage tanks, 'ISI' marked, cylindrical, vertical with closed top conforming to IS 12701-1989 having two layers wall construction with manhole lid and suitable locking arrangement including making holes for inlet, outlet and over flow pipes, hoisted, fixed in position and testing complete and demolition/taking down of existing RCC/PVC water storage tank of any description from the existing staging/ Building after disconnecting and dismantling of all existing pipe line connections carefully and taken as credit complete all as specified and as directed.Note :Make of HDPE Tank :Sintex/Polycon /Infra

Supply and fix 25 mm dia PTMT ball valve high pressure (Minimum weight :210 gms) with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe complete all as specified and as directed.Make : Prayag/M/S Shakthi Industries

Supply and fix 25 mm bore dia gun metal gate valve heavy duty ISI marked with iron wheel head screwed both ends to iron pipes and fixed complete all as specified and as directed.Make : Leader/Kirloskar/Kartar

Supply, lay and test cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of Cross sectional area 10 Sqmm, 2.0 core laid in trenches or fixed to wall / passing through pipe / pole compete all as specified and as directed. Note : (i) Excavation & earth work, Brick protection and sand cushining shall be measured and paid for separately under relevent items in this BOQ (ii) Make of XLPE Cable : Gloster/Polycab/CCI

Supply and fixing Bollard light LED type 9 watt decorative Led extruded aluminium bollard with integrated driver with decorative cylindrical / rectangular shape 230 watt volts AC outdoor type with indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete all as specified and as directed . Note : Make : Wipro cat part no Fantasy Bollard LED OR equivalent in CG/Philips.

Supply and fix Post top lantern LED type 20 watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete all as specifed and as directed. Note : Make : Wipro cat part no Wipro 20W Cool White Post Top Light-LP07-251-XXX-57-CLOR equivalent in CG/Philips.

Excavation in trenches n. exc. 1.5m wide and n. exc. 1.5m depth in any type of soil up to top of drain pipe,laying of cable etc complete all as specified and as directed.

Material and labour for Double wall corrugated HDPE pipes of ISI marked 63 mm outer dia and 50 mm inner dia as in cable protection fixed to poles with necessary suitable MS clamps, bolts, nuts, washers or laid in trenches/ roads crossings etc complete. all as specified and directed.Note :Make : Rex/ Ketron/Duraline

Returning, filling in including spreading levelling and well ramming in layers n exc 25cm thick with soil obtained from excavation from any type of soil complete. all as specified and directed

Removing of excavated material/surplus soil n exc 50m and depositing where directed at a level n exc 1.5m above the starting point for any type of soils complete. all as specified and directed

Supply and fix Galvanised iron water tube 'light grade' of size 25 mm bore with and including all GI fittings such as flanges, unions, reducer sockets, socket reducing bends, elbows, tee, check nuts, caps, plugs etc.and clips, wall hooks etc. laid in trenches, on ground or fixing on wall and testing complete all as specified and directed.Note:Make of GI Pipe :TATA/JINDAL/ZENITH (ISI MARKED)

SHRI.H.R.PATIL

DHANSHRI ENTERPRISES

M/s. VIJAY ELECTRICALS