UPGRADATION / IMPROVEMENT TO VARIOUS BUILDINGS AND INFRASTRUCTURE AT ATS BELGAVI

Amount

Schedule 'A' Part - I (B/R Works) Material and labour for complete removal of existing treatment on wall/ roof projections including facia, cornices etc by scrapping with mechanical sander (having mechanical vaccum mechanism) with sanding pad of appropriate grit to make surface clean, free from dust, loose paint etc by skilled labour complete all as specified and as directed.

Material and labour for applying acrylic water based exterior grade primer @0.9ltr (undiluted)/10 Sq mtrs diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine of paint application with a flow speed of minimum 1 ltr per minute having a pressure of 3300 PSI and allow 6-8 hrs to dry the surface for painting of subsequent coats complete all as specified and as directed.

Material and labour for applying two coats water based premium acrylic smooth exterior emulsion of approved colour with silicon additive and color stay Technology, Excellent Dirt Pick up resistance with low VOC less than 50 gram/litre as per Leeds specification, Anti Algal properties in two coats @ 1.79 ltr (undiluted)/ 10 Sqm diluted with water as per manufacturer instruction applied over priming coat with fully automatic airless spray machine of paint application with a flow speed of minimum 1 ltr per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface in both the coats of paint complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floor and pavings not exceeding 15cm thickness below or above ground level complete all as specified and as directed.

Demolition of cement concrete (unreinforced) as in roofs, floors (other than ground floor), beam, staircases, landing, chajjas and similar suspended work complete all as specified and as directed.

Material and labour for providing 25 mm thick Plain cement concrete 1:2:4 type B0 using 12.5 mm graded crushed stone aggregate as in sub-floors, sub-bases, floors and pavings, etc. complete all as specified and as directed.

Dismantling floor hearth/ wall tiling including cement mortar bedding (but not backing) and removing tiles & rubbish off the premises complete all as specified and as directed.

Material and labour for vitrified ceramic coloured tiles, 9 to 10mm thick (square or rectangular), polished, area of each tile not exceeding 0.36 sqm, set and jointed in neat cement slurry and pointed in white or coloured cement to match, as in floors over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified and as directed.

Material and labour for vitrified ceramic coloured tiles, 9 to 10mm thick (square or rectangular), polished, area of each tile not exceeding 0.36 sqm, set and jointed in neat cement slurry and pointed in white or coloured cement to match, on vertical surfaces as in skirting over and including 10mm thick backing coat in cement mortar 1:3, complete all as specified and as directed.

Material and labour for joint free non skid ceramic coloured tiles, 7 to 8mm thick (square or rectangular), area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, set and jointed in neat cement slurry and pointed in white or coloured cement to match, as in floors over and including 15mm thick screed bed in cement mortar 1:4, complete all as specified and as directed.

Material and labour for glazed ceramic coloured tiles in vertical surface, 450X350X7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including 10mm thick backing coat in cement mortar 1:3, complete all as specified and as directed.

Taking down shutters of any description exceeding 1 Sqm but not exceeding 2 Sqm and refixing in same opening complete all as specified and as directed.

Taking down chowkats or frames not exceeding 1.5 sqm each (without taking of shutters from the frame) complete all as specified and as directed.

Taking down chowkats or frames exceeding 1.5 sqm but not exceeding 4 Sqm each (without taking of shutters from the frame) complete all as specified and as directed.

Material and labour for 20mm thick black Zebra Bhainsalana marble tiles, machine cut, in skirting / dado, jambs and cills at sides of window with rounded edges, jointed with grey cement slurry including cutting and wax polishing on marble to give high gloss finish complete over and including 10mm thick backing coat in cement mortar 1:4 complete all as specified and as directed.

Taking down cement plaster on brick/concrete/stone masonry walls etc including racking out joints, hacking for key, scrubbing down with water etc complete including removing rubbish off the premises complete all as specified and as directed.

Supply and fix Anodised aluminium powder coated frame for doors, windows, ventilators with one or more rebates including jointing cleat for fixing etc. complete all as specified and as directed.

Supply and fix Powder coated, anodised aluminium window or ventilators shutters sliding type, without sash bars, aluminium sections weighing 0.55 Kg/m including necessary jointing cleats, glazing clips, rubber packing, anodised aluminium powder coated snap beading, aluminium anodised fittings roller wheels, spring catcher, for sliding type shutters and necessary packing materials etc complete all as specified and as directed.

Supply and fix Anodised aluminium powder coated windows and ventilators shutters, side/top hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary jointing cleats, glazing clips, rubber packing, anodised aluminium powder coated snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No), hinges type B-21 100mm long (2 nos), suitable handle (1 No) complete all as specified and as directed.

Supply and fix Anodised aluminium grills of approved design/pattern, with approved standard section and fixed to the existing window frame with CP brass / stainless steel screws @200 centre to centre, including cutting the grills to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, complete all as specified and as directed.

Supply and fix in repairs decorative stainless steel curtain rod 25 mm dia, 1.25mm wall thickness complete all as specified and as directed.

Supply and fix stainless steel brackets for fixing of 25mm dia curtain rod to wall and including decorative stops/ rollers/end cap fixed to both ends of 25mm dia stainless steel rod, complete all as specified and as directed. Note: Each pair inclusive of two numbers of stainless steel brackets and two numbers of decorative stainless steel stops/roller/end cap.

Supply and fix sheet plain glass 5.5 mm thick, tinted, in squares not exceeding 0.5 Square Metre for each pane, glazing with oil putty or aluminium beading complete all as specified and as directed.

Supply and fix stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples or steel screws or aluminium beading complete all as specified and as directed.

Supply and fix figured glass, pin head type 4 mm thick, not exceeding 0.5 Square Metre for each pane, glazing with oil putty or aluminium beading complete all as specified and as directed.

Dismantling Asbestos cement (corrugated, semi-corrugated etc) sheets in roof coverings complete all as specified and as directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.,) or insulation boards/slabs/blankets, any thickness including cover fillets and frame work complete all as specified and as directed.

Supply and fix pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Supply and fix pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in ridges, roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Material and labour for providing and fixing 12mm thick Gypsum board in ceiling as per manufacturer instruction over and including powder coated aluminium snap grid frame work (size of grid 605 x 605mm) supported by hangers 6 mm dia GI (up to 1200mm length /as per site requirement) adjusting level fixed to roof slab/walls/wooden/steel members by means of ceiling cleats made out of GI flat 40x3mm size 60 cm long and expansion hold fasteners 12.5mm dia 40mm long and painting two coats of acrylic distemper over a coat of primer and preparatory work complete all as specified and as directed.

Supply and fix 18mm thick PVC sheet one side decorative lamination and other side balancing lamination for modular kitchen cabinet shutters/drawers, front shutter complete all as per manufacturers instructions and as directed.

Supply and fix 18mm thick PVC sheet fixed with cleat and screws, cement adhesive for modular kitchen cabinet side, top & bottom and shelves inside the cabnites of approved colour complete all as per manufacturers instructions and as directed.

Supply and fix auto closing hinges openable at 0 degree for kitchen cabinet shutters complete all as specified and as directed.

Supply and fixing Ball bearing runners 45 mm Telescopic Channel ( 20 Inch ) full extension load capacity 50 kgs complete all as specified and as directed.

Supply and fix stainless steel handles 100 mm size for kitchen cabinet shutters complete all as specified and as directed.

Supply and fix stainless steel wire basket (storage basket) pull out type for large utensils, size 486 x 500 mm with necessary fixing clips etc. complete all as specified and as directed.

Supply and fix stainless steel wire basket (cup and saucer basket) pull out type, size 530 x 500 mm with necessary fixing clips etc. complete all as specified and as directed.

Supply and fix stainless steel wire basket (Jar basket) pull out type, size 536 x 500 mm with necessary fixing clips etc. complete all as specified and as directed.

Supply and fix stainless steel wire basket (Thali basket) pull out type, size 380 x 500 mm with necessary fixing clips etc. complete all as specified and as directed.

Supply and fix stainless steel wire basket (cutlery basket) pull out type, size 380 x 500 mm with necessary fixing clips etc. complete all as specified and as directed.

Supply and fix stainless steel wire basket (Grain Trolley) pull out type, size 380 x 500 mm with necessary sliding frame structure, fixing clips etc. complete all as specified and as directed.

Supply and fix stainless steel wire basket (storage / Plain basket) pull out type, size 380 x 500 mm with necessary fixing clips etc. complete all as specified and as directed.

Supply and fix stainless steel wire basket (Bottle pull out) pull out type, size 150 to 200 mm with necessary sliding frame structure, fixing clips etc. complete all as specified and as directed.

Supply and fix in repairs 18/19mm thick prelaminated particle board, interior grade, prelaminated both sides with decorative choice laminations fixed with screws to timber frame work as in shelves of cupboards and kitchen cabinets with teak wood lipping complete all as specified and as directed.

Demolition of brickwork and stone / boulder masonry built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed.

Material and labour for brick work with sub-class 'B' bricks, straight or curved on plan exceeding 6m mean radius built in CM 1:6 complete all as specified and as directed.

Material and labour for rendering 15 mm thick on fair face of brick work for wall in CM 1:4 to be finished even & fair complete all as specified and as directed.

Material and labour for rendering 10 mm thick on other than fair face of brick work for wall in CM 1:6 to be finished even & smooth complete all as specified and as directed.

Material and labour for preparation of newly plastered surfaces of walls and applying two coats of acrylic distemper on walls over a coat of alkali-resistant primer over 3mm thick wall care putty( multipurpose mixer shall be used for uniform and proper mixing of putty applied with putty sprayer and prepared the surfaces even and smooth by vaccum based sanding machine) complete all as specified and as directed. NOTE:- First coat of distempering on new surfaces of walls with acrylic distemper shall be carried out all as specified in SSR Part I and final coat of distempering on walls with acrylic distemper shall be carried out through mechanical tools

Material and labour for preparation of newly plastered surfaces of walls and applying two coats of cement based paint over a coat of alkali-resistant priming paints complete all as specified and as directed. NOTE:- First coat of cement based paint on new surfaces of walls shall be carried out all as specified in SSR Part I and final coat of cement based paint on walls shall be carried out through mechanical tools

Material and labour for glazed ceramic coloured tiles in vertical surface, 450X350X7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including 10mm thick backing coat in cement mortar 1:4, complete all as specified and as directed.

Removal of excavated material of rocks / concrete and plaster debris, broken tiling to a distance exceeding 1.5 Km but not exceeding 5 Km and depositing where directed at a level not exceeding 1.50 m above the starting point complete all as specified and as directed.

Material and labour for providing plain cement concrete 1:2:4 type B1 using 20mm graded stone aggregate as padding in sunken portion with liquid Water proofing compound @ 0.4 % by weight of cement or as specified by manufacturer, whichever is more complete all as specified and as directed. Note: Water proofing liquid shall be measured & paid separately.

Material and labour for 15 mm thick cement plaster on brick/ concrete surfaces in CM 1:3 mixed with liquid water proofing liquid at the rate of 0.4 % by weight of cement or as specified by manufacturer, whichever is more in sunken portion finished even and smooth without using extra cement all as specified Note:- Water proofing liquid Shall be measured and paid separately.

Supply only liquid water proofing compound (ISI Marked).

Material and labour for applying tack coat of bitumen grade 85/25 @ 1.20Kg/Sqm over a coat of primer including applying APP based membrane minimum weighing 3kg/Sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt not less than 150gms/Sqm) laid on tack coat surface by forced application complete all as specified and as directed.

Material and labour for providing PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in foundation, filling and mass concrete complete all as specified and as directed.

Supply and fix Vitreous china wash down water closet (pedestal pattern), white (excluding flushing cistern and flush pipe) including all accessories i.e. seat cover complete all as specified and as directed.

Supply and fix Vitreous China squatting pan Orissa pattern of size 580 x 440 mm white with integral foot rest (excluding flushing cistern and flush pipe) including lime concrete bedding all round and finished just below level of rim of pan to receive the floor complete all as specified and as directed.

Supply and fix Vitreous China wash basin, white, flat back, size 550 x 400 mm including brackets, waste pipe and CP waste coupling including cutting for and pinning in ends of brackets or erecting stand complete all as specified and as directed.

Supply and fix 75mm bore UPVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed.

Supply and fix 75mm bore UPVC (SWR) multi floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed.

Supply and fix in repair UPVC SWR pipe 75 mm bore, single socketed in any length with rubber ring joints, fixed to walls including clamps complete all as specified and as directed.

Supply and fix in repair UPVC SWR pipe 110 mm bore, single socketed in any length with rubber ring joints, fixed to walls including clamps complete all as specified and as directed.

Supply and fix 75 mm dia bore UPVC (SWR) bend of any radius complete all as specified and as directed.

Supply and fix 110 mm dia bore UPVC (SWR) bend of any radius complete all as specified and as directed.

Supply and fix 75mm dia bore UPVC (SWR) junction single, (single T) equal or unequal with access door complete all as specified and as directed.

Supply and fix 110 mm dia bore UPVC (SWR) junction single, (single T) equal or unequal with access door complete all as specified and as directed.

Supply and fix 75 mm dia UPVC vent cowl complete all as specified and as directed.

Supply and fix 75 mm dia bore UPVC (SWR) bend with oval access door of any radius complete all as specified and as directed.

Supply and fix 15mm bore Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe including fitting such as bends, elbows, tees etc complete all as specified and as directed.

Taking up or down 15 mm bore PPR/GI tubing and connections along with fittings such as tees , bends etc fixed to walls and ceilings or laid in floors/ trenches complete all as specified and as directed.

Supply and fix 20mm bore Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe including fitting such as bends, elbows, tees etc complete all as specified and as directed.

Taking up or down 20 mm bore PPR/GI tubing and connections along with fittings such as tees , bends etc fixed to walls and ceilings or laid in floors/ trenches complete all as specified and as directed.

Supply and fix 25mm bore Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe including fitting such as bends, elbows, tees etc complete all as specified and as directed.

Supply and fix Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete all as specified and as directed.

Supply and fix factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws complete all as specified and as directed.

Material and labour for Non skid ceramic tiles, coloured, 7 to 8mm thick (square or rectangular), area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, set and jointed in neat cement slurry and pointed in white cement with pigment to match, as in floors over and including 15mm thick screed bed in cement mortar 1:6, complete all as specified and as directed.

Supply and fix in repairs 15mm dia bore Bib taps, fancy type, cast copper alloy, with crutch or butterfly handle, chromium plated, screwed down, screwed for iron pipe complete all as specified and as directed.

Supply and fix in repairs 15mm dia bore pillar taps, fancy type, cast copper alloy with capstan head, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed for iron pipe complete all as specified and as directed.

Supply and fix in repairs 15mm dia stop valve fancy type, chromium plated, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and as directed.

Supply and fix in repairs 15mm dia angle valve fancy type, chromium plated, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and as directed.

Supply & fix in repairs brass chromium plated shower rose 125mm size with shower arm fixing with 15 mm dia pipe complete all as specified and as directed.

Supply and fix in repairs PVC valve less syphonic action type low level flushing cistern 10 Ltr capacity with inlet ball valve, handle, Bracket, 32mm dia PVC flush pipe of polythene of low or high density complete all as specified and as directed.

Supply and fix in repairs PVC connection 15mm size with PTMT nuts of length 600mm complete all as specified and as directed.

Supply and fix in repairs Health faucet ABS body mild steel chromium plated suitable for 15mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed.

Supply and fix in repairs tubular brass chromium plated towel rail 20mm dia 600mm long between flanges complete all as specified and as directed.

Taking down shutters of any description exceeding 1 Sqm but not exceeding 2 Sqm complete all as specified and as directed.

Supply and fix Pressed steel frames made out of 1.25mm thick MS sheet of size 125 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and as directed including one shop coat of primer.

Supply and fix Pressed steel frames made out of 1.25mm thick MS sheet of size 105 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and as directed including one shop coat of primer.

Supply and fix 30 mm thick second class hardwood plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers; supplied and fitted to chowkats complete all as specified and as directed.

Material and labour for 2nd class hardwood glazed and skeleton shutters, 30 mm thick, open rebated and prepared to receive glass, gauze, etc., (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, gauze etc; sizes of members of shutters as specified in SSR Part I, section 8, clause 8.24 (a) supplied and fitted to chowkats complete all as specified and as directed.

Material and labour for providing plain cement concrete type B1 1:2:4 (using 12.5 mm graded stone aggregate) in coping, filling hollow portion of steel frames, band, slightly chamfered edges and finished smooth including necessary formwork complete all as specified and as directed.

Material and labour for cutting holes in brick/ stone walls built in cement mortar for inserting hold fasts of depth of embedded portion exceeding half brick but not exceeding one brick from the face of the jamb in to the wall and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required complete all as specified and as directed.

Supply and fix 300 mm Aluminium alloy, anodised sliding door bolt with hasp and stapple bolt type complete all as specified and as directed.

Supply and fix 250 mm Aluminium alloy, anodised sliding door bolt with hasp and stapple bolt type complete all as specified and as directed.

Supply and fix 150 mm long aluminium anodised handle cast type complete all as specified and as directed.

Supply and fix 100 mm long aluminium anodised handle cast type complete all as specified and as directed.

Supply and fix 200 mm long aluminium anodised barrel tower bolt complete all as specified and as directed.

Supply and fix 150 mm long aluminium anodised barrel tower bolt complete all as specified and as directed.

Supply and fix 100 mm long butt hinges medium weight cold rolled complete all as specified and as directed.

Material and labour for applying two coats of synthetic enamel paint on new steel surfaces of any description over 10cm width or girth including necessary preparation of surface complete all as specified and as directed.

Material and labour for applying two coats of synthetic enamel paint over a coat of pink primer on new wooden surfaces of any description over 10cm width or girth including necessary preparation of surface complete all as specified and as directed.

Material and labour for waterproof cement based putty @ 1Kg (undiluted) per Sqm of average thickness 1mm over the plastered/old painted wall after scraping to prepare the surface even and smooth complete and sanding of the putty surface with mechanical wall sander (having mechanical vaccum mechanism) having RPM not less than 1500, sanding pad of 240 grit or above to make the surface free from dust etc. by skilled labour as per following steps:- Step 1 : Mix the putty powder by adding water as per manufacturer instructions and mixed it with putty mixer with the mixing capacity of min 2.5Kg putty per minute. Step 2 : Apply the first coat the prepared mixer with the help of fully automatic airless spray machine of putty application having flow speed of max 6 ltrs per minutes with a maximum pressure 3300 PSI. Step 3 : Allow 6-8 hrs time to dry the putty surface.Step 4: Prepare the putty surface with mechanical wall sander to achieve smooth finish The above putty surface shall be followed by applying a coat of acrylic water based interior grade primer @ 0.8 ltr (undiluted) / 10 Sqm diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface for painting of subsequent coats complete including applying two coats of acrylic distemper using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacture and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface complete all as specified and as directed. Note : Sanding of surface to be done by mechanical sander with 1500 - 2700 RPM, with internal dust extraction system for clean environment certified by paint manufacturer.

Material and labour for applying a coat of white wash on old decorated surfaces of wall including necessary preparation of surfaces complete all as specified and as directed.

Material and labour for applying two coats of white wash on old decorated surfaces of ceilings including necessary preparation of surfaces complete all as specified and as directed.

Material and labour for applying a coat of synthetic enamel paint on old painted steel surfaces of any description over 10cm width or girth including necessary preparation of surface complete all as specified and as directed.

Material and labour for applying a coat of synthetic enamel paint on old wooden surfaces of any description over 10cm width or girth including necessary preparation of surface complete all as specified and as directed.

RESURFACING TO MINI PARADE GROUND Repair to pot holes of any depth, not exceeding 1 Sqm each including, sweeping free from, dust and mud, or water scoring sunken surfaces in roads, paths etc cutting around edges at least 25 mm in depth and making good by filling screened and graded road metal and well ramming (including supply of road metal) etc complete all as specified and as directed.

Preparing Black top surfaces by brushing with steel wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surfaces with gunny bags / air compressor to remove all loose dirt etc complete all as specified and as directed.

Material and labour applying evenly a tack coat with bituminous primer @ 5 Kgs per 10 Sqm using paving bitumen of grade VG-30 over prepared surface by mechanical sprayer etc complete all as specified and as directed.

Material and labour for average 50mm thick premixed bituminous macadam laid, rolled and compacted to required gradient and camber (Consolidated thickness 75 mm or less), by using 4% bitumen content any penetration using paving bitumen of grade VG-30 confirming to IS-73-2006) etc complete all as specified and as directed.

Providing and laying 25 mm thick bitumen mastic wearing course (as per specification) with industrial bitumen of grade 85/25 conforming to IS : 702, prepared by using mastic cooker and laid to required level and slope, including providing antiskid surface with bitumen precoated fine grained hard stone chipping of approved size at the rate of 0.005 cum per 10 sqm and at approximate spacing of 10 cm centre to centre in both directions, pressed into surface protruding 1 mm to 4 mm over mastic surface, including cleaning the surface, removal of debris etc. all complete all as specified and as directed. (Considering bitumen using 10.2% as per MORTH specification).

Material and labour for preparing bituminous surfaces of road and marking 2.5 mm thick centerline, stop lines, dashes, arrows etc. and the like not exceeding 10cm wide on road pavements with hot applied thermoplastic road marking paint of approved colour conforming to BS3262-1989 with special applicator machine all as per manufacturer instructions complete all as specified and as directed.

Schedule 'A' Part II (E/M Works) INTERNAL ELECTRIFICATION Taking down copper/aluminum wiring (light, fan, socket or power) complete and including fitting and fixture such as switches, socket, ceiling rose, pendent, regulators, light fittings etc complete all as specified and as directed. NOTE:- Job including for taking out old gutties, screw, nails etc and making good to disturbed surface of wall, floor etc including to match with the existing surface.

Material and labour for point wiring with 1.5 sq mm single core PVC insulated cable 1100 V grade with multistranded copper conductor drawn through PVC conduit with all accessories fixed to wall /roofs ceiling etc and including provision of 1.5 sq mm PVC insulated and unsheathed copper conductor as earth continuity conductor and connected to common earth dolly including fabricated steel terminal box made out of 1.6 mm thick MS sheet concealed in the wall with 3 mm thick laminated sheet top cover / PVC Switch Board mounted on wall for mounting the switches, socket outlets, fan regulators etc all as following.

One light point controlled by one switch.

One Exhaust Fan point controlled by one switch.

All as per item no 117 above but with 2.5 sq mm copper conductor cable for one 3 pin socket outlet 15 amp independent board including 2.5 sq mm cable as in continuous earth wire complete all as specified and as directed..

Supply and fix switch piano flush type single pole one way 5 amp complete all as specified and as directed..

Supply and fix ceiling rose three pin/PVC polycarbonate, isolated body complete all as specified and as directed.

Supply and fix switch socket combination 2 in 1, 3 pin 6/16 amp flush type complete all as specified and as directed.

Supply and fix in repair LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed. (Provn for Building Security Light - 01 No for each OMQ Qtrs)

Supply and fix in repair LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.

Supply and fix in repair LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.

Supply and fix LED in repair Highbay luminaries of 80 W with PDC Housing, elliptical shaped LED Highbay luminaries with PC diffuser with 150lm/w efficacy, equipped with 4kv inbuilt surge protection, IP65 protection rating including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed. Make - Bajaj Cat Pat No - BGHBM PRO B 120L WH NB SD or equivalent make

Supply and fix exhaust fans heavy duty, steel body duly powder coated, AC single phase 230/ 240 V of size 300 mm sweep with louver including cutting of wall and making hole of suitable size required for 300 mm sweep exhaust fan and making good to the disturb surface and matching with existing surface of wall complete all as specified and as directed.

Taking down MCB DBs Complete with MCBs / SFUs complete all as specified and as directed.

Supply and fix MCB DB SPN 8 ways double door with 240 Volt, 200 amps rated bus bar with all accessories flush in the wall including matching the existing surface complete all as specified and as directed.

Supply and fix MCB DB SPN 4 ways double door with 240 Volt with all accessories flush in the wall including matching the existing surface complete all as specified and as directed.

Supply and fix in replacement of MCB TPN 32-63 amps, 440 Volts, complete all as specified and as directed.

Supply and fix in replacement of MCB single pole and neutral 06-32 amps, 240 Volts, complete all as specified and as directed.

Supply and fix in replacement of MCB 6 to 32 amps single pole 240 Volts, complete all as specified and as directed.

Taking down sub main wiring of any size from the ceiling, walls etc and including making good to disturb surface of wall and match with the existing surface complete all as specified and as directed.

Material and labour for sub main wiring drawing through PVC casing and capping with two single core 2.5 sq mm and one run of 2.5 sq mm as earth wire of stranded copper conductor PVC insulated and unsheathed cable of 1100 volts grade complete all as specified and as directed. Note:- Two runs of pvc insulated copper cable and one run of earth wire and PVC casing and capping is measured as one length.

Material and labour for sub main wiring drawing through PVC casing and capping with two single core 4.0 sq mm and one run of 4.0 sq mm as earth wire of stranded copper conductor PVC insulated and unsheathed cable of 1100 volts grade complete all as specified and as directed. Note:- Two runs of pvc insulated copper cable and one run of earth wire and PVC casing and capping is measured as one length.

Material and labour for Earthing complete with galvanised mild steel earth plate electrode of size 600 x 600 x 6mm thick buried directly in ground earth (in vertical) earth pit not less than 2.25 mtr deep below normal ground level with top edge of the earth plate not less than 1.5 mtr below ground level, connected to galvanised iron or earth lead wire 4.0 mm dia (8 SWG) by means of nut, bolt, check nuts and washer of galvanised iron including PCC pit in PCC 1:2:4 type B-1 pre-cast RCC cover slab using reinforcement with XPM weighing not less than 1.87 kg/Sqm with suitable handle made of 12mm round bar, including necessary excavation and earth work in any type of soil, 20mm dia medium grade galvanised steel tube for watering with one end fixed with cast iron funnel and wire mesh 15mm dia bore light grade galvanised steel tubing upto 7.5 m length for drawing earth lead wire protection, common salt, charcoal, etc all as shown in electrical plate No 3 of SSR Part-I and testing on completion complete all as specified and as directed.

EXTERNAL ELECTRIC SUPPLY Supply, installation and testing of 12.5M High mast shaft in two sections suitable for 47m/sec wind speed as per IS 875 part 3, with head frame, winch mounting bracket, luminaries carriage suitable to install 06 nos luminaries in symmetrical arrangement. The raising and lowering system shall be of 2 continuous rope system without any intermediate compensating disc with double drum winch. The wire rope shall be of minimum 6mm stainless steel of grade AISI 316, 3mm section thickness, top dia 150mm, bottom dia 340/360mm with stainless steel (AISI 316) 2/3 wire rope system, PCD - Pitch Circle Dia - 445 mm, Integral power tool motor, manual handle, junction box including earthwork and construction of shallow foundation with M25 grade concrete for the high mast and foundation bolts manufactured from special steel along with nuts, washers anchor plate and common template complete all as specified and as directed. Make - Bajaj BHMRL 12.5C LED or equivalent approved make

Supply and fix 150W LED flood light fitting complete with driver and necessary accessories as required to mount on the lantern carriage. Housing material of the flood light should be of Matt grey polyster powder coated pressure die cast aluminium housing with heat resistant toughened clear glass with SS screws. The system lumen output should not be less than 120 lumens / watt. Fixture should be suitable for a input voltage range of 120 V to 270 V with input power supply of 230 V AC. Ingress protection class of IP 66 complete all as specified and as directed.

Supply and install and testing of outdoor (3.15mm thick) stand mounted feeder pillar with 16A TPN MCB incomer, single dial time switch, 16A TP contactor for the automatic switching of luminaries, power tool control with 2 Nos 6A contactors and raise lower push button, incoming 10sqmm and outgoing 2.5sqmm terminals complete all as specified and as directed.

Excavating in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth; for laying cables and getting out in hard/dense soil for laying cable/erecting poles complete all as specified and as directed.

Returning and filling of trenches in two parts (i) using riddled soil obtained from excavated soil upto depth of 30cm (8cm below cable and remaining above cable) for cushioning of cable and (ii) refilling the trench of remaining depth with normal excavated soil all as specified and directed. Note :- (i) Excavated soil shall be riddled by using sieve to separate composite particles etc as per IS 1255-1983 and refilling in trenches as in cable cushioning.

Removing surplus excavated material to a distance not exceeding 50 Mtr and depositing where directed at a level not exceeding 1.5 M above the starting point complete all as specified and as directed.

Supply and fix DWC Pipe IS-16205, size inner dia 32 mm, outer dia 40 mm for cable protection in wall/under ground laying of UG cables including SNAP-FIT Coupler and all fittings as required at site complete all as specified and as directed.Make:- ASTRAL/KETRON/DUTRON/DURALINE

Supply, laying and testing cable stranded aluminium conductor of size 10 sq mm 4 core XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade complete all as specified and as directed.