Triplex plunger pump with 6 HP diesel engine at the rate of 1500 RPM

Triplex plunger pump with 6 HP diesel engine at the rate of 1500 RPM

Pre fabricated Pump Shed of size 2.4M X 2.4M and height 1.8M at front side and 1.60 M at rear side above FFL 300 mm hight with Angle Iron of 50x50x6 mm

High quality Line flame arrestor with 32mm pipe attachment

Kitech Pipe 25 by 32 pre insulated 15 mm Pex

Female elbow 2532 x 25321630 CI

Equal Tee 2532 x 1620 CI

Reducer 2532 x 1 inch BR

MS Nipple 32mm x 25mm

PVC pipe 150 mm dia 300 mm long

PBS Roll Self finished tarfelt hessian base Grade 1 conforming to IS 1322 198 of size 20m x 0.90m weight of each roll shall not be less than 42.50 Kgs plus or minus 2.5 Kgs in dry conditions.

Quick setting compound

Natural sand confirming to IS 383 1970

Stone Aggregate to be crushed rock or gravel 20mm graded confirming to IS 383 1970

Stone Aggregate to be crushed rock or gravel 40mm graded confirming to IS 383 1970

Load bearing concrete solid Blocks of size 400mm x 200 mm x 200 mm casted in design mix 1 2 4 to have a strength of M10 to M15.

Steel roofing troughts of size 1630mm x 613mm x 180mm made out of 2mm thick hot rolled carbon sheet steel conforming to relevant IS complete with set of 14 Nos MS hexagonal nut bolts and washers

ISMB 150x75mm 3.25 mtr long Complete including two coats of painting over one coat of red oxide primer.

LDPE sheet having weight 0.26 kg per Sqm BLACK of width 5.5 Mtr and 300 GSM

HDPE sand bag laminated off size 75 x 40 cm sand colour and each bag having weight not less than 60 grms.

Ply wood 2 mtr x 0.30 mtr and 12 mm thick for form work

Mild steel TMT bars 12 mm dia conforming to relevant IS

Mild steel TMT Bars 08 mm dia conforming to relevant IS

Ms Binding wire Annealed not less than 0.9mm dia confirming to relevant IS

Brick Trowel Steel 305 mm with handle.

Brick Hammer with handle weight 1.2 Kg.

Aluminum straight edge 50 mm square 2 mm thick 1800mm long

Plaster Trowel with hard wooden Handle ISI marked.

Galvanised Iron Pan Mortar Tasla 16 Gauge 16 inch dia minimum weight of 1.5 Kg

Fish line best quality Brick line

Plumb Bob iron best quality with all accessories

Rammer Earth with 6 feet long hard wooden Handle Minimum weight 5 Kg without handle

Picks Axes with Chiesel and Point ends. Kudali 14 CP nominal weight 3.0 Kg overall length minimum 595 mm with hard wooden handle.

Showel Square Nose 14 Gauge TATA High Carbon Steel Product Code SVL 022 blade size 310 x 245 mm shaft size 710 mm fitted with strong Steel crutched hard wooden handles

Phowrah with hard wooden handles with min weight 2.00 Kgs

Painting Brush 100 mm best quality

Multipurpose Non-Slip Rubber Reusable Gloves for scrubbing cleaning brick work etc. Colour Olive Green and Black

Aluminum spirit level 12 inch

Water leveling pipe PVC 50 mtr

Cutting plier insulates 6 inches

Hacksaw blade double end

Hacksaw frame

Measuring tape 15 Mtr

Crowbar 25mm 5 inch long

Rammer with wooden handle of weight 5 Kg 10 LBS

Pipe wrench 12 inch

Pipe wrench 18 inch

Plumbing dye set 25.50 mm

Adjustable spanner 12 inch

Adjustable spanner 18 inch

Spanner Rings 13 x 17 mm

Spanner Rings 10 x 11 mm

Spanner Rings 14 x 15 mm

Spanner Rings 19 x 22 mm

Spanner Rings 24 x 26 mm

Spanner Rings 30 x 32 mm

Spanner OJDE 19 x 22 mm BOQ Title KSS17INFBDE