04/PR/BSPTCL/2026-06

Demolishing R.C.C. work including stacking of steel bars and disposal of unserviceable material withing 50 metres lead:

Demolishing brick work including stacking of serviceable material and disposal of unserviceable material within 50 meters lead: In cement mortar

Removing mortar form bricks and cleaning bricks including stacking within a lead of 50m (stacks of cleaned bricks shall be measured): brick work in cement mortar

Boring, providing and installing bored cast-in-situ reinforced cement concrete piles of grade M-25 of specified diameter and length below the pile cap, to carry a safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of boring, with bentonite solution and temporary casing of appropriate length for setting out and removal of same and the length of the pile to be embedded in the pile cap etc. all complete, including removal of excavated earth with all lifts and leads (Length of pile for payment shall be measured upto bottom of pile cap). 300 mm dia piles

Supplying and Filling in plinth with local sand and under floors including, watering, ramming consolidating and dressing complete.

Providing designation 100 A one brick flat soling joints filled with local sand including cost of watering, taxes, royalty all complete as per building specification and direction of E/l,

Providing & laying in position Specified grade of reinforcement cement concrete excluding the cost of centring ,shuttering,finishing and reinforcement-All work up to plinth level. (a) 1:1.5:3( 1Cement:1.5Coarse Sand:3gradede stone aggregate 20mm,nominal size.

Reinforced cement concrete work in wall (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts, etc. upt floor five level excluding cost of centring, shuttering, finishin and reinforcement.1:1:5:3(1 cement: 1.5 coarse sand:3 graded stone aggregate 20mm nominal size)

Brick work with bricks of class designation 100A in foundations and plinth in :Cement mortar 1:6 (1 cement: 6 coarse sand )

Extra for Brick work in superstructure above plinth level upto floor V

Centring and shuttering including strutting, propping etc. And removal of form for Columns,Pillars, Piers, Abutments, Posts and Strut

Centring and shuttering including strutting, propping etc. And removal of form for lintels, beams, Plinth Beam, griders, bressumers and cantilevers.

Providing and fixing in position of Reinforcement for RCC work including straightening,cutting,bending and binding etc.Thermo-Mechanically Treated bars(FE-500)-8 mm

Providing and fixing in position of Reinforcement for RCC work including straightening,cutting,bending and binding etc.Thermo-Mechanically Treated bars(FE-500)-12 mm

Cement plaster in course sand 12 mm cement plaster of mix 1:6(1 cement: 6 coarse sand)

Applying one coat of cement primer of approved brand and manufacture on wall surface: Cement Primer

Finishing walls with water proofing cement paint of approved brand and manufacture and of required shade to give an even shade New work (three or more coats)

Structural steel work in singal section fixed without connecting plate including cutting.hoisting,fixing in position and applying a priming coat of approved steel primer all complete.

Painting with ready mixed paint of approved brand and manufacture in all shades to give an even shade:New steel work (two or more coats)

Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length ( total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron ‘Y’ shaped placed 2.4 m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5 mm thick) wire of high tensile strength of 165 kg/ sq mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately)

Providing and fixing 1 mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3mm MS gusset plates at the junction and corners.all necessary fittings completejncluding applying a priming coat of approved steel primer Using M.S. angle 40x40x6 mm for diagonal braces

Excavating, supplying and filling of local earth (including royalty but excluding cairriage cost) by mechanical transport upto a lead of 3km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete. If local earth is available at more than 3 km lead the actual lead must be approved by compitent authority. cairraiage of material will be paid seperately and calculated after deducting initial lead.

carriage cost of materials

Local Earth

Extra cost of materials

Providing labour for cleaning of site etc. as per E/I

Rate are inclusive of GST @ 18% for the above items

Name of the Contractor

Address of the Contractor

I/we offer in Figures……. in words………………… % (Percentage) High / Less/Estimated rate as mentioned in the Bill of quantity.

In word

Seigniorage fee

Total (Rs.)

Note :The rate for seigniorage fee calculation shall be firm and shall not be affacted by the percentage rate(Below/Above) quoted for BOQ.