REPAIR TO SECURITY COMPOUND WALL, CHAIN LINK AND OTHER B/R MISC WORKS AT HQ 10 SECT RR AND 29 RR BN UNDER AGE (I) CIF (K)

Amount

Demolition of cement concrete (unreinforced) of floor or paving not exc 15 cm thick above or below ground level complete all as specified and as directed.

M&L for plain cement concrete type B1, 1:2:4 (using 20 mm graded stone aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and as directed.

M&L for plain cement concrete type C2, 1:3:6 (using 40 mm graded stone aggregate) in surface chanels and drains complete all as specified and as directed.

M&L 75 mm thick plain cement concrete, 1:4:8, type D-2 using 40mm graded crushed stone aggregate, as in sub-base, complete all as specified and as directed by the Engineer-in-Charge.

M&L 60 mm thick Machine pressed precast concrete interlocking paver block any shape with grey cement and pigment and size conforming to IS 15658-2006 of 60mm thickness M-35 Grade complete all as specified and as directed by Engineer-in-charge.

M&L for sand filling under floor or in foundation including watering and consolidation, complete all as specified.

M&L for chequered cement concrete tiles 20cm X20 cm X25 mm thick set & jointed and pointed in neat cement slurry in floors with grey cement and pigments and over 15 mm thick screed bed in CM 1:6, complete all as specified and as directed by Engineer-in-charge.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc

M&L for cement concrete 40mm thick type B-1, 1:2:4 (using 20mm graded stone aggregate) for floor complete all as specified and as directed

Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles, complete all as specified and directed by Engineer-in-Charge.

M&L for brick work with sub class 'B' bricks straight or curved on plan exc. 6 meter mean radius built in cement mortar 1:6 complete all as specified and as directed

M&L 15 mm thick rendering on other than fair faces of brick work or concrete surfaces in CM 1:6 and finishing the surfaces even and smooth without using extra cement complete all as specified and as directed by Engineer-in-charge.

M&L 15 mm thick rendering on other than fair faces of brick work or concrete surfaces in CM 1:6 and finishing the surfaces even and smooth without using extra cement including taking down old plaster complete all as specified and directed .

M&L for preparation of new plastered or unplastered surfaces of walls and applying two coats of white wash, complete all as specified and as directed by Engineer-in-charge.

Dismantling wrought iron or mild steel work of any description not otherwise provided for all, complete all as specified.

S&F in repair Galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain-ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured)

M&L mild steel and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-16

S&F in repair MS galvanised Chain link fencing size 60X65mm including line wires staining bolts etc & binding wire complete all as specified and as directed by Engineer -in-charge..

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire.

S&F for framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and as dirceted

Preparation of new painted steel and iron surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete, all as specified and as dirceted

Excavation in post holes (or similar holes) each n exc 0.5 cum, getting out, soft/loose soil returning, filing in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface.

M&L for plain cement concrete type D2, 1:4:8 (using 40mm graded stone aggregate) in walls or retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and post (including caps and bases).

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering, complete all as specified and directed by the Engineer-in-Charge.

S&F 0.63 mm thick Galvanised corrugated mild steel sheeting with two corrugation side lap fixed with coach screws and washers in roofs, walls etc with grade of zinc coating 275.

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated profile steel sheet 0.50mm thick of colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed by the Engineer-in-Charge.

S&F Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of colour having tensile strength of 550 Mpa as in roof covering/cladding to ridges, valley gutters etc. fixed with self tapping screws, complete all as specified and directed by the Engineer-in-Charge.

Note :- An amount of Rs. Rs 13,640.00 on account of credit schdule for Sch 'A' Part-II Shall be deducted from the total amount of BOQ to arrive at the contract sum.

M/S Manzoor and Co (BID ID -3320679)

SB ENTERPRISES (BID ID -3333689)

M/S MAHIR MUNEER (BID ID -3321029)