UG EQUIPMENT LIFTING AND REINSTALLATION

SUPPLY & FABRICATION OF — STRUCTURAL STEEL-SUPPLY, FABRICATION, WELDING AND ERECTION AND PAINTING OF STRUCTURAL STEEL IS:2062 E 250 (FE 410 W) OR HIGHER GRADE A/B COLUMNS/BEAMS, PURLINS, TIES, RAFTERS, PLATFORMS/WALKWAYS/CROSS OVERS/PIPE SUPPORTS/INSERTS /DOWEL BARS OF 32 MM FOR THE MAINTENANE WORKS OR ANY OTHER REQUIREMENT ARISING AT SITE. THE SCOPE INCLUDING PREPARATION OF ALL NECESSARY FABRICATION DRAWING INCLUDING BILL OF MATERIALS; SUPPLY OF STRUCTURAL STEEL CONSISTING OF NON-BQ PLATES, ROLLED STEEL JOISTS, CHANNELS, ANGLES, FLATS, BEAMS, ETC. FIXING OF INSERT PLATES IN RCC/BRICKWORK, STRAIGHTENING OF RAW STEEL IF REQUIRED, PREPARATION OF SUPPLEMENTARY SKETCHES, SUPPLY OF BOLTS, NUTS, WASHERS, SHIMS, PACKS, GAS, WELDING ELECTRODES AND ALL OTHER CONSUMABLES, AS REQUIRED ALL COMPLETE. THE SCOPE INCLUDES LOADING, TRANSPORTATION, UNLOADING AND DELIVERY AT ERECTION SITE OF ALL FABRICATED STRUCTURES, ERECTION, ALIGNMENT AND WELDING OF ALL STRUCTURES TRUE TO LINE, LEVEL, PLUMB AND DIMENSION, INCLUDING RECTIFICATION IF ANY, SPLICING, SITE ASSEMBLY ALL AS PER TECHNICAL SPECIFICATIONS AND DRAWINGS, USE OF ALL SAFETY EQUIPMENTS, HYDRA CRANE, CHAIN PULLEY BLOCKS ETC; CARRYING OUT WELDING PROCEDURE/ WELDER QUALIFICATION TESTS; PUG CUTTING/GAS CUTTING; DRILLING HOLES OF SUITABLE SIZE; SUPPLYING AND PROVIDING ERECTION AND PERMANENT BOLTS WITH NUTS AND WASHERS ALL COMPLETE AS PER DRAWINGS AND INSTRUCTIONS OF ENGINEER-IN-CHARGE. UNIT WT WILL BE CONSIDERED AS PER BIS ONLY. IN CASE ACTUAL WT IS LESS THAN WT AS PER BIS, THEN ACTUAL WT WILL BE CONSIDERED FOR MEASUREMENT. PAINTING WITH 2 COATS OF EPOXY PRIMER (TOTAL DFT-75 MICRONS) AND 2 COATS OF APPROVED QUALITY AND SHED EPOXY PAINT (TOTAL DFT-40 MICRONS) OF APPROVED MAKE . QUOTED RATES ARE DEEMED TO INCLUDE THE ENTIRE SCOPE AS PER ITEM AS DESCRIBED HEREIN ABOVE.

WELDING OF PIPELINES — HPCL WILL PROVIDE THE PIPELINE MATERIAL. FABRICATION OF REPLACEMENT/ NEW CS OR LPG PIPING OF ALL NB DIAMETER SIZES AND PIPE THICKNESSES ABOVE SCHEDULE 30 UPTO SCHEDULE 120. FOR BUTTWELDED JOINTS ONLY, INCLUDING RELEVANT JOINTS OF DRAIN/VENT BLEEDERS, STEAM TRACERS, TIE-INS, ETC. JOBS LIKE PROVISION OF GUSSETS, HOLDING LUGS FOR TRACER LINES, ETC. ARE A PART OF THE JOB. SUPPLY OF PIPES; FITTINGS IS IN HPCLS SCOPE AS FREE ISSUE MATERIAL. JOB INCLUDES CUTTING, EDGE PREPARATION, FIT-UP, DPTESTING, ETC. WELDING JOB SHALL BE DONE BY CODES; HPCL MAY ASK FOR WELDER QUALIFICATION TEST BEFORE WELDING, HPCL APPROVED WELDERS ONLY AND ALL WE LD JOINTS SHALL BE OF RADIOGRAPHIC QUALITY, SUBJECT TO STAGE-WISE INSPECTION; APPROVAL BY HPCL/HPCL APPROVED TPI AGENCY. ANY REPAIR INSPECTED OBSERVED RADIOGRAPHIC FILM REVIEW SHALL BE PERFORMED BY WELDER WITHOUT ANY ADDITIONAL CHARGE. PAYMENT WILL BE MADE FOR ACTUAL JOINTS WELDED IN LPG/UTILITY PIPELINES. SURFACE PREPARATION <(>&<)> PAINTING OF PIPELINES AS PER INSTRUCTIONS OF ENGINEER IN CHARGE. PAINT WILL BE PROVIDED BY HPCL. 3 PROVIDE SERVICE OF 16 2982-MANAGALORE LPG 12 Hour Shift 50 29AAACH1 Yes MANPOWER/SHIFT IMPORT FACILITY 118B1Z8 THE SCOPE OF THIS WORK COVERS SAFE AND SYSTEMATIC EXECUTION OF LIFTING, REMOVAL, RE-INSTALLATION, BOX-UP AND LPG CHARGING OF EQUIPMENT LOCATED IN THE CAVERN SHAFT AREA TILL NORMAL OPERATION IS ESTABLISHED, IN COORDINATION WITH HPCL’S OPERATIONS AND MAINTENANCE TEAM. THE INDICATIVE MINIMUM MANPOWER REQUIREMENT IS GIVEN IN THE TENDER. THE CONTRACTOR TO ENSURE THE DEPLOYMENT OF MANPOWER ACCORDINGLY FOR EACH SHIFT. THE CONTRACTOR TO QUOTE THE RATES, CONSIDERING ALL THE ASSOCIATED SERVICE CHARGES, INSURANCE, PPES ETC. VENDOR'S SCOPE INCLUDES CHECKING FOR ANY PRESSURE IN THAT CASING BEFORE START OF WORK, INCASE ANY LPG PRESSURE IS OBSERVED IN PARTICAULAR CASING SAME TO BE BROUGHT TO THE NOTICE OF ENGINEER-IN-CHARGE (EIC). NITROGEN PURGING AND WATER PUSHING ARRANGEMENTS SHALL BE CO-ORDINATED BY THE VENDOR AS PER REQUIREMENT AND INSTRUCTIONS OF ENGINEER-IN-CHARGE. VENDOR SHALL SUBMIT ATTENDANCE SHEET OF EACH SHIFT SIGNED BY ENGINEER IN-CHARGE AT THE TIME OF BILLING. IT IS VENDOR'S RESPONSIBILITY TO MAINTAIN EIC SIGNED ATTENCE SHEET. PAYMENT WILL BE MADE AS PER ACTUAL NUMBER OF WORKMEN AVAILABLE IN THE SHIFT. ALL JOBS SHALL BE PERFORMED AS PER JOB PROCEDURE AND INSTRUCTIONS OF ENGINEER-IN-CHARGE.

SEVICE OF CAVERN — ENGAGING THE SERVICES OF EXPERIENCED EXPERT/FOREMAN WELL VERSED WITH THE PLANNING AND EXECUTION ACTIVITIES OF CAVERN CASING INERTIZATION WITH NITROGEN, WATER PUSHING, LIFTING, REMOVAL, REPAIR, REINSTALLATION, BOX UP AND NORMALIZATION OF UNDERGROUND EQUIPMENT OPERATIONS IN LPG CAVERN. THE CONTRACTOR SHALL ENGAGE THE EXPERT/FOREMAN ONLY AFTER OBTAINING APPROVAL FROM HPCL. HPCL RESERVES THE RIGHT TO INTERVIEW AND ASK FOR DOCUMENTATION OF THE PERSONS SKILL FOR SIMILAR JOBS. HPCL MAY ASK EXPERT OPINION INCASE OF ANY EMERGENCY/PROBLEM DURING NORMAL LPG CAVERN OPERATION FOR ANY OBSERVATION AS PER SITE REQUIREMENT. EXPERT SHALL BE ABLE TO GUIDE FOR THE SITUATION AND MUST BE AVAILABLE ON PHONE/VIDEO CONFERENCING, NO EXTRA PAYMENT WILL BE MADE FOR OPINIONS OVER CALL/VIDEO CONFERENCING. PAYMENT WILL BE MADE ONLY FOR ACTUAL SITE VISTS ON MANDAY BASIS.