Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹19.3 LAccepted-AOC BOOTH NO 15 SHOPPING COMPLEX URBAN ESTATE PHASE II JALANDHAR CITY PIN 144022 | JALANDHAR | PUNJAB | 144022 | L1 | Accepted-AOC Lowest | |
| 2 | L2₹22.5 L+₹3.2 L (16.4%)Rejected-Finance 129 PANCH SHEEL VENUE DEEP NAGAR JALANDHAR CANTT PB | L2 | Rejected-Finance L2 |
Tender Value
₹25 L
EMD Value
₹50,000
Closing Date
1 Nov 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer (East) Jalandhar Cantt
Garrison Engineer (East) Jalandhar Cantt
CERTAIN REPAIR TO MD ACCN ALONG S AND T LINE, HUDSON LINE INCL MAP HUDSON LINE AND MES ACCNS UNDER AGE B/R-II OF GE (EAST) JALANDHAR CANTT
2022_MES_556004_1
GE/JULL/ET-63/2022-23
Open Tender
Civil Works
Item Rate
273 days
Jalandhar Cantt
As per tender documents
8 documents required · 8 mandatory
₹500
Garrison Engineer (East) Jalandhar Cantt
₹50,000
Yes
22 Nov 2022
4 Oct 2022
8 Nov 2022
4 Oct 2022
1 Nov 2022
20 Oct 2022
Amount
Dismantling of brick tiles single layer as in roof covering all as specified and directed.
Demolition of mud in roofs any thickness including plastering and leeping (whether full thickness removed or only a part thereof) complete all as specified and directed.
Material and labour for PCC (1:2:4) type B-0 using 12.5mm graded stone aggregate as in benching, roof padding, roof kerbs or mud stops, coping etc rounded or chamfered on edges complete all as specified and directed.
Material and labour for rendering 12mm thick cement plaster on brick or concrete surfaces in cement mortar (1:3) mixed with integral water proofing compound in the proportion recommended by manufacturer, surfaces finished fair and even complete all as specified and directed. Note : WPC shall be measured and paid separately.
Cleaning the surface and made free of dirt, foreign particle, laitance followed by grinding all protrusion to made surface modulated. Thereafter, inspection for cracks on the surface caused by thermal expiation contraction. Cutting the grooves with suitable cutter machine in V groove filled with repairs mortar/ micro-concrete/ general purpose grout as recommended proportionally as per recommendation of manufacturer. Making of goll as at all the corners with polymer modified mortar (1:4) cement sand with 3.5% acrylic of cement weight all as specified and directed
Supply and applying high build elastomeric waterproofing coating based on pure hydrophobic polyurethane cold applied of spray/ brush applied, membrane with an elongation of 280% and tensile strength of 2.7N/mm2 as per ASTM D 2370, crack bridging ability of 3mm, no leakage upto 5 bars of water pressure as per DIN 1048, min 88% solid content. The system includes final base preparation, epoxy primer 1:1 (Resin : Harder) application with 100% water dilution and pure polyurethane application in 2 coats with a total min consumption of 1.25 Kg/Sqm all as specified and directed. Note : Application should be done with Graco sprayer by a company authorised applicator.
Taking down shutters of any description exc. 1 Sqm and n. exc. 2 sqm each complete all as specified and directed.
Taking down chowkhats or frame with shutter (without taking off shutter from the frame) area n. exc. 1.5 Sqm each for doors and windows complete all as specified and directed.
Taking down chowkhats or frame with shutter (without taking off shutter from the frame) area exc. 1.5 Sqm but n. exc. 4 sqm each for doors and windows complete all as specified and directed.
Supply and fixing structural framed work as in doors or gates of angle or other section with gusset plates, rails,bracesetc complete drilled for fixing of steel sheeting or other covering doors etc to be prepared for hanging or sliding with end incl either hooks and hinges or steel hanging door fittings and hanging also fastening and fixing confirming to Fe 410-W (Gde-E-250) quality A, complete including two coats of synethic enamel paint over a coat red oxide primer complete all as specified and directed
Supply and fixing structural framed work as in doors or gates of angle or other section with gusset plates, rails,bracesetc complete drilled for fixing of steel sheeting or other covering doors etc to be prepared for hanging or sliding with end incl either hooks and hinges or steel hanging door fittings and hanging also fastening and fixing confirming to Fe 410-W (Gde-E-250) quality B, complete including two coats of synethic enamel paint over a coat red oxide primer complete all as specified and directed
Supply and fixing pressed steel door frame of size 125mm x 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete all as specified and directed
Supply and fixing pressed steel door frame of size 105mm x 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete all as specified and directed
Material and labour for mild steel, plain black sheet 1mm thick as in wall cladding, steel gates and similar work, cut to size, holes punched including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams including bending or turning up, mitred angles etc as required complete all as specified and directed
Material and labour for 35mm thick 2nd class hard wood factory made plain framed, paneled shutters (two panels), with lock rail and panels of 9mm thick BWP commercial ply or of veneered particle board 12mm thick with commercial veneering on both faces with rails and style. The size of rail and stile as per IS: 1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and directed.
Material and labour for 35mm thick 2nd class hard wood factory made glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in clause 8.24 (a) of SSR Part-I; supplied and fitted to chowkhats complete all as specified and directed.
Supply and fixing factory made 40mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.
Supply and fixing solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, supplying & fixing in opening as per specification & drawing complete all as specified and directed.
Supply and fixing factory made solid panel PVC door shutters 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side and as gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site, complete all as specified and directed.
Supply and fixing 20mm thick factory made PVC flush cupboard shutter consisting of panel of hollow section thickness consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm inserted inside the hollow section of stiles, top and bottom rails and two 19mm x 19mm MS tubes inserted horizontally inside the hallow profile section at an equal distance from top and bottom of door and fixed with hallow profile section using 5mm thick PVC sheet using screws hollow PVC profile shall be lipped with 10mm (5mm x 2) thick x 20mm width on stiles and rails using solvent cement. The inner panel shall be laminated with 5mm thick termite proof water proof and fire retardant prelam PVC sheet using solvent cement on both the sides of the panel etc complete all as specified and directed.
Supply and fixing 100mm size mild steel butt hinges, medium weight, cold rolled and fixed with screws/welded to frame complete all as specified and directed.
Supply and fixing 100mm size stainless steel butt hinges for fixing to PVC doors complete all as specified and directed.
Supply and fixing 100mm size hasp and staple, mild steel, wire type, stove enameled black, including bolt to hinge plate and fixed with screws complete all as specified and directed.
Supply and fixing aluminium handle cast type anodised 125mm long complete all as specified and directed.
Material and labour for mild steel sliding door bolts 250mm long plate type stove enameled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed.
Supply and fixing MS pressed handles, oval type, stove enameled black 150mm size complete all as specified and directed.
Supply and fixing MS 150mm size PTMT bow handle fixed with machine screws complete all as specified and directed.
Supply and fixing mild steel 300mm ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.
Supply and fixing MS barrel tower bolt 200mm long stove enameled black with bright bolt and fixed complete all as specified and directed.
Supply and fixing 200mm size PTMT tower bolt fixed with machine screws complete all as specified and directed.
Supply and fixing in repair 300mm long aluminium alloy, anodised, sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed.
Supply and fixing in repair extruded aluminium alloy handles, fabricated type, anodised, 150mm size, all as specified and directed.
Supply and fixing in repair 150mm aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed.
Supply and fixing steel window 1.25 mm thick box type (primer coated) ERW hollow P section of size 60mm x 25mm single rebated comprises glazed skeleton shutter ERW sec 50mm x 20mm and 1mm thick with two openable leaf consisting two No sash bars of T-section 20mm x 3mm complete welded to frame with one vertical mullion of ERW box type T-section of size 60mmx25mm and 1.25mm thick including cutting holes and making good dismantled portion PCC (1:2:4) type B-1 four No for each window) including following fittings welded to frame shutter: - (a) Hold fast, 150mm long of 12mm x 3mm made to shape-04 No per window. (b) Handle of z section 20mm x 25mm, 100mm long 01 No per leaf (c) MS tower bolt 150mm long- 2 No per leaf (d) z section 20mmx25mm, 100mm long stopper - 01 No per leaf (f) MS pintal hinges of size 75mmx12mm- 2 No per leaf (g) Fabrication & fixing arrangement as per Drg No CEJZ/TD-06/07. Note: Grills/ guard bars, glass, wire mesh and painted shall be measured and paid separately under respective item of this BOQ.
All as per ser item No. 34.00 but gauged shutters without sash bars.
All as per ser item No. 34.00 but as in ventilators fixed type
Supply and fixing mild steel framed work for such as guard bars/ grills, grating etc with end of bars shouldered and/ or riveted forged into spikes, framed guard bars barred iron door, railings and similar work complete conforming to Fe-290 Gde E 165 including one shop coat of zinc chromate primer complete all as specified and directed.
Material and labour for galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified and directed.
Material and labour for 4mm thick sheet glass ordinary quality and glazing with oil putty in squares n. exc. 0.50 Sqm in each pane complete all as specified and directed.
Material and labour for 3mm thick sheet glass ordinary quality and glazing with oil putty in squares n. exc. 0.50 Sqm in each pane complete all as specified and directed.
Material and labour for hacking out old broken glass (any thickness, size, quality or description) from wooden/ metal frames glazed with putty or fixed with beads complete all as specified and directed.
Demolition and breaking up drain pipes (AC or PVC) of any dia set in cement mortar complete all as specified and directed.
Supply and fixing PVC (SWR) rain water pipes single socketed in any length with rubber ring joints laid in floors 110 mm bore complete all as specified and directed.
Supply and fixing PVC (SWR) rain water pipes single socketed in any length with rubber ring joints laid in floors 75 mm bore complete all as specified and directed.
Supply and fixing 100mm dia cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or fixed to walls etc. complete all as specified and directed.
Supply and fixing 75mm dia cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or fixed to walls etc. complete all as specified and directed.
Supply and fixing PVC (SWR) bends any radius 110mm bore complete all as specified and directed.
Supply and fixing PVC (SWR) bends any radius 75mm bore with access door complete all as specified and directed.
Material and labour for 100mm bends (any radius) with ducks foot or heel rest complete all as specified and directed
Material and labour for 75mm bends (any radius) with ducks foot or heel rest complete all as specified and directed
Supply and fixing PVC (SWR) vent cowl 110mm bore all as specified and directed.
Supply and fixing PVC (SWR) vent cowl 75mm bore all as specified and directed.
Supply and fixing cast iron cowls 75mm size, complete all as specified and directed.
Supply and fixing 75/100mm extra oval access doors including fittings necessary nuts and bolts complete all as specified and directed
Supply and fixing cast iron floor trap with grating including jointing to waste pipe in run lead joint fixed in cement concrete type (1:2:4) type B-1 diameter of outlet 75mm, fixed in repairs complete all as specified and directed.
Material and labour for galvanised steel tubes 15mm bore, medium grade with & including all fittings fixed to wall, ceilings and or laid in floors etc. including taking up/ down existing tubing complete all as specified and directed.
Material and labour for galvanised steel tubes 20mm bore, medium grade with & including all fittings fixed to wall, ceilings and or laid in floors etc. including taking up/ down existing tubing complete all as specified and directed.
Supply and fix in repair PVC white low level flushing cistern 10 ltr capacity with all fittings syphonic action with top push type button with inlet ball valve and float including flush pipe, ball valve, handle, bracket PVC short bend etc. complete all as specified and directed.
Cleaning of over head tank of any description and any capacity de-scaling, washing complete with soap solution and removing vegetation around the over head tank/ plate form including opening and reconnecting with GI tubing and writing month of cleaning with stencil having 3" height as site requirement complete all as specified.
Supply and fixing in repair vitreous china wash hand basin, white, flat back size 550 x 400mm including one number brass CP waste coupling, 32mm dia, brackets 2 numbers including cutting for and pinning in ends of brackets complete all as specified and directed.
Supply and fixing in repair Wall Mixer 3-in-1 with provision for both Over Head Shower and Hand Shower complete with 115mm long bend Pipe, connecting legs & wall flange of MAKE: Prayag CAT No. 9880 or equivalent makes of Group I of Appx “B” suitable for fixing to 15mm bore (dia) GI Pipe, complete as all specified and as directed
Supply and fixing in repair pillar tap, cast copper alloy chromium plated, with capstan heads, 15mm bore dia of pipe screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and directed.
Supply and fixing PVC connection fiber, reinforced 45 cm long 15mm in size with brass check nut and PVC washers at both ends complete all as specified and directed.
Supply and fixing in repair 15mm angle/ stop valves, fancy type chromium plated, screwed down, high pressure with crutch or butterfly handle screwed at two right angles ends for both iron pipe complete all as specified and directed.
Supply and fixing hot and cold mixer fancy type single or double legged chromium plated brass screwed down high pressure with crutch or butterfly handle screwed both ends iron pipe suitable for 15mm bore pipe fixed in repairs to wash hand basin complete all as specified and directed.
Supply and fixing stop valves 15 mm nominal bore, cast copper fancy type, chromium plated with long shank and cup (concealed type), screwed down, high pressure with crutch or butterfly handles, screwed both ends for iron pipe or for brass ferrule or to GI socket, fixed in repairs complete all as specified and directed.
Supply and fixing in repair sinks with drainage board made of stainless steel 1mm thick, kitchen or laboratory, with plugs, washers and wastes coupling, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, including PVC waste pipe complete all as specified and directed.
Supply and fixing in repair bib tap cast copper alloy chromium plated suitable for 15mm bore iron pipe with long body fancy type complete all as specified and directed.
Supply and fixing in repair bib tap cast copper alloy suitable for 15mm bore iron pipe complete all as specified and directed..
Supply and fixing in repair brass chromium plated shower rose of 125mm size with or without swivel joints including fixing to steel pipe or union complete all as specified and directed.
Supply and fixing brass chromium plated tubular towel rail 20mm dia, ‘D’ type, 600mm long between flanges fixed complete all as specified and directed.
Supply and fixing brass chromium plated tower ring 15cm dia, fixed in repairs, complete all as specified and directed.
Material and labour in repair PVC bathroom cabinet of size 535mm x 483mm x 110mm with mirror fixed complete all as specified and directed.
Supply and fixing soap dish stainless steel chromium plated fixed with brass screws and rawl plug complete all as specified and directed.
Supply and fixing Acrylic corner set of 3 pieces as per sample approved by Engineer-in-Charge all as specified and directed.
Supply and fixing chromium plated jet for EWC with 1.0m long CP tube superior quality complete all as specified and directed.
Supply and fixing Toilet paper holder of chromium plated fixed to walls chromium plated brass screws complete all as specified and directed.
Supply and fixing rotational moulded polyethylene water storage tanks, 500 litres capacity (cylindrical vertical with closed top), ISI marked, hoisted and fixed in position all as specified in SSR Part I, complete all as specified and directed
Supply and fixing rotational moulded polyethylene water storage tanks, 1000 litres capacity (cylindrical vertical with closed top), ISI marked, hoisted and fixed in position all as specified in SSR Part I, complete all as specified and directed
Material and labour in repair ball valve brass high pressure with polythene float and fly nut complete screwed for 15mm bore dia of iron pipe or brass ferrule and fixed complete all as specified and directed
Material and labour for ball valve brass high pressure with polythene float and fly nut complete screwed for 20mm bore dia of iron pipe or brass ferrule and fixed complete all as specified and directed
Supply and fixing stop valves 20mm bore, cast copper alloy, screwed down with high pressure with crutch or butterfly handles, screwed both ends for iron pipe or for brass ferrule or to GI socket complete, fixed in repair, complete all as specified and directed.
Dismantling floor, hearth or wall tiling/ china mosaic including cement mortar bedding (but not backing), removing rubbish off outside MD land complete all as specified and directed.
Material and labour for non skid ceramic coloured tiles of size 300 x 300x 7 to 8mm thick in floor set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with & including 15mm thick screed bed or bedding layer in cement mortar (1:6) complete all as specified and directed.
Material and labour for glazed ceramic coloured tiles of size 450 x 300 x 6 to 7mm thick as in vertical surfaces i.e. skirting/ dado set and jointed in neat cement slurry and pointed in white or coloured cement to match the existing surface with & including rendering 15mm thick in cement mortar (1:4) complete all as specified and directed.
Material and labour for 25mm thick PCC (1:2:4) type B-0 using 12.5mm graded stone aggregate as in sub floors, sub base; concrete surfaces finished fair & even to receive topping floor finish/ layer complete all as specified and directed.
Material and labour for non skid ceramic coloured tiles 6 to 7mm thick (Square or rectangular) area of each tile exc. 0.11 Sqm but not exceeding 0.18 Sqm as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including 15mm thick screed bed or bedding layer in cement mortar (1:6) complete all as specified and directed.
All as per item No 88.00 but in skirting/ dado laid over and including 15mm thick rendering in cement mortar (1:4) as backing coat.
Material and labour non skid ceramic coloured tiles 7 to 8mm thick (Square or rectangular) area of each tile exc. 0.06 Sqm but not exceeding 0.11 Sqm as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including 15mm thick screed bed or bedding layer in cement mortar (1:6) for laying floor finishes complete all as specified and directed.
Material and labour for chequered cement concrete tiles 25cm x 25cm x 20 to 22mm thick with grey cement and pigment, jointed and pointed in neat cement slurry in floor laid over and including 15mm thick screed bed in cement mortar (1:6) complete all as specified and directed.
Material and labour for 100mm thick PCC (1:3:6) type C-2 using 40mm graded stone aggregate as in sub floors, sub base, hard standing, concrete surfaces finished even & rough to receive topping floor finish/layer all as specified & directed.
Material and labour 60mm thick coloured reflective type machine pressed precast concrete inter-locking paver blocks any shape and size conforming to IS 15658-2006, M-35 grade, laid in floor/ path/ hardstandings in any pattern as approved, laid over and including 30mm thick sand cushion and interstices filled with sand using plate vibrator complete all as specified and directed.
Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.
Material and labour for reinforced cement concrete (1:2:4) type B-0 using 12.5mm graded stone aggregate as in slab supported on wall, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like including necessary formwork complete all as specified and directed.
Material and labour for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and directed.
Demolition of brick work or stone/ boulder masonry built in cement mortar including all quoins, arches, pillars etc. but excluding ashlars facing, dressed stone work & precast concrete articles complete all as specified and directed.
Material and labour for brick work with old size sub class 'B' bricks, straight or curved on plan exceeding 6m mean radius and built in cement mortar (1:6) complete all as specified and directed.
All as per Ser item No 98.00 above but except bricks
Material and labour for repairing of RCC projections, chajjas, roofs, fascia etc by necessary preparation, scarping, cutting, chiseling de-rusting and cleaning exposed reinforcement, surfaces of damaged, loose RCC surfaces with cement concrete (1:1½:3) using 12.5mm graded crushed stone aggregates and reinforcement with expended metal/ welded mesh of weight exc. 2 kg per sqm but n. exc. 3 kg per sqm with ot without facia and finished with cement and sand mortar (1:3) using coarse sand and work in patches area n. exc. 5 sqm each and thickness of RCC member n. exc. 70mm including necessary form work and applying two coats of cement base paint of tint matching with the existing surfaces; work in building at any height as required complete all as specified and directed.
Material and labour for 25mm dia powder coated mild steel curtain rod, fixed with & including MS powder coated hooks/ brackets and decorative finials (at both side), shade as approved by GE complete all as specified and directed including fixing of long size rawl plugs in wall for MS hook fixed in repairs complete all as specified and directed.
Supply and fixing 20mm dia curtain rod, mild steel, chromium plated fixing in cup board with brackets, stops, rollers etc, complete all as specified and directed
Dismantling asbestos cement (corrugated, semi corrugated etc) sheets in roof coverings complete all as specified and directed.
Material and labour 6mm thick asbestos cement fiber corrugated/semi corrugated sheets as in roof coverings fixed with L-type or J-type or cranked hook bolts complete all as specified and directed.
All as per Ser item No 104.00 above but except sheets
Material and labour for asbestos cement two piece adjustable ridge for corrugated or semi corrugated sheets 6mm thick fixed with L or J type hooks complete all as specified and directed
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified.
Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. and removing surplus spoil out of defence land where directed complete all as specified and directed
Material and labour for 15mm thick rendering in cement mortar (1:6) on fair faces of brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.
Material and labour for rendering 15mm thick cement plaster on brick or concrete surfaces in cement mortar (1:4) mixed with integral water proofing compound in the proportion recommended by manufacturer, surfaces finished fair and even complete all as specified and directed. (WPC shall be measured and paid separately under appropriate item of this BOQ).
Material and labour for 5mm thick rendering in cement mortar (1:3) as on ceiling including finishing the surface even and smooth without using extra cement complete all as specified and directed.
Material and labour for preparation of new plastered surfaces of wall and applying two coats of oil bound distemper over a coat of primer and one coat of birla white putty complete all as specified and directed.
Material and labour for preparation of new plastered surface of wall and applying three coats of white washing complete all as specified and directed.
Material and labour for preparation of new plastered surface of ceiling and applying three coats of white washing complete all as specified and directed.
Material and labour for preparation of newly plastered or un-plastered surface of walls including cornices, plasters etc. and applying two coats of cement base paint over a coat of primer coat complete all as specified and directed.
Material and labour for preparation of new wood and wood based surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
Material and labour for preparation of new or previously untreated steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
Demolition of cement concrete of any description and in any position (as in sunken portion also) and removing surplus spoil out of defence land where directed at a level n.exc 1.5m above the starting point complete all as specified and directed.
Material and labour for cement concrete (1:5:10) type E-2 using 40mm graded brick aggregate as in filling in sunken portion and mass concrete complete all as specified and directed.
Material and labour for applying two coats of FOSROC/NITOBOND/SHALIMARSUPERCRETE water proofing coating on the entire surface of sunken portion complete all as specified and directed. MAKE;- above brand in P.S-II
Material and labour for 15mm thick cement screed in cement mortar (1:3) with integral WPC FOSROC/NITOBOND/SHALIMARSUPERCRETE complast X 421 IC @ 130ml per bag of cement including a bonding coat of FOSROC’s Nitco bond AR cement slurry/ STP No 1 liquid @ 200 ml per bag complete all as specified and directed. MAKE;- above brand in P.S-II
Material and labour for 25mm thick cement concrete (1:2:4) type B-1 using 20mm graded aggregate and finishing the surface fair and even to receive the top layer complete all as specified and directed.
Supply and fixing in repair mild steel CP grating 125mm dia with centre hole all as specified and directed.
Supply and fixing vitreous china squatting pan Orissa pattern size 580 x 440mm white with front or back inlet, integral foot rest including CI 'P' or 'S' trap with providing lime concrete bedding and connecting to flushing pipe complete including breaking up existing damaged WC seat and make good to floor complete all as specified and directed.
Supply and fix in repair vitreous china wash down water closet pan (pedestal pattern) white including plastic water closet sheet cover white, closed pattern with flat bottom, with mild steel chromium plated or aluminium hinging device including mild steel chromium plated jet fixed to water closet with 415mm to 445mm long flexible pipe complete all as specified and directed.
Material and labour for 50mm thick PCC (1:3:6) type C-1 using 20mm graded stone aggregate as in plinth protection, laid in panels including finishing the concrete surface even & smooth without using extra cement complete all as specified and directed.
Material and labour for 75mm thick PCC (1:4:8) type D-2 (using 40mm graded stone aggregate), as in sub floors, sub base, hard standing, concrete surfaces finished fair & even to receive topping floor finish/layer complete all as specified and directed.
Material and labour for 40mm thick PCC (1:2:4) type B-1 using 20mm graded stone aggregate as in floor toppings concrete surface finished even and smooth without using extra cement complete all as specified and directed
Supply and fixing glass dividing strips 3mm thick and 38mm wide inserted in position conforming to design complete all as specified and directed.
Uprooting of trees, grass, bushes etc from brick wall/roof tiles or any other surfaces of bldg including dismantling the required brick work/roof tiles/mud concrete etc for uprooting the vegetation etc and make good the same to match with existing surface with same material or concrete 1:2:4 type B-1 after pouring the chemical (which destroy the growth of vegetation to the place where vegetation removed). Note:- The rate shall include for scaffolding or any other arrangement required during this process upto 10 mtr height complete all as specified and directed.
NATIONAL BUILDERS
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .