Supply Installation, Testing, Commissioning and Maintenance of supervisory control and data acquisition (SCADA) at Jawahar Sagar Dam of WRD Rajasthan under National Hydrology Project (NHP)

Amount

Supply of PLC/RTU system with software development of PLC/RTU, Control Panel with front door opening cabinet, fitted with Power buses, MCBs & modem. Suitable power supply to power up PLC/RTU panel, including 1 KVA UPS for Power back up of minimum 2 hours, 7” or above HMI display & Industrial type electrical fitting & cabling with suitable conduits complete for all related field instruments, as per technical specification.

Supply of Shaft Encoder based rotary position sensor with Digital Display Type Gate Position Sensors for indication and monitoring of Spillway gates, Intake Gates, Silt flushing gates including cabling & integration with PLC/RTU as per technical specifications.

Supply of 3 Phase VFD Starter panel of 7.5 KW for each motor of Barrage Gate which shall consists of VFD, S.P.P, MCB, OLR, Timer, Main Switches including cabling & Electronic Digital Dial Indicator complete as per technical specifications.

Supply of LTE Surveillance IP based 3G/4G Bullet Camera with Sim Card Slot, 2 Mega Pixel 2 OR4 Array/ 72 LED Colour camera. 6 or 8 or 12mm (according to site suitability) with storage facility of at least 24-hour video recording, in elegant metal Die cast housing. Outdoor weather resistant IP 66, for monitoring the gates operation at barrage/dam & complete as per Technical Specifications.

Supply of Pan Tilt Zoom (PTZ) 36 X Optical and 12 X Digital Zoom; 2 Mega Pixel IP based (DIGITAL) camera, 500 mtrs. Night Vision (Multiple Intelligent Array system) in IP66 Weather Resistant Outdoor Metallic Housing. Outdoor weather resistant IP 66 including cabling required for Barrage. As per technical specifications.

Supply of Water Level transmitter non-contact Ultrasonic type having 10m range for measuring upstream level & downstream discharge of head regulators of Main Canal including all necessary cabling with suitable conduits & electrical fittings & mast complete as per technical specifications.

Supply of Water Level transmitter non-contact RADAR type having 35m range for measuring upstream level & downstream dischrge of barrage including all necessary cabling with suitable conduits & electrical fittings & mast complete as per technical specifications.

Supply of Datalogger of 2 channel input type with GPRS/GSM telemetry for data logging & trnsmission of Real time data from Level transmitters at River in the upstream of dam, to SCADA system, with all relevant mounting accessories. As per technical specifications.

Supply of solar panel, charger regulator, batteries, lightening arrestor with all connectors, cables and conduit for cables for providing un interrupted power supply to dataloggers, as per technical specifications.

Supply of Main PLC Controller system with firm ware based hot redundancy which shall include software development of PLC, Control Panel with front door opening cabinet, fitted with Power buses, MCBs & modem. All the Electrical fittings will be Industrial type. Including suitable switch mode power supply (SMPS),12” display & interconnection with related remote PLC/RTU’s, complete as per technical specification.

Supply, engineering and development of customized SCADA software for complete Barrage automation with life time licensed version as per technical specifications.

Supply of Master server which includes Server with server Rack and industrial grade monitor with USB, RS232/RS485, Ethernet Ports, OS Windows 8 or higher compatible to SCADA System complete as per technical specifications.

NETWORK VIDEO RECORDER (NVR) 32 Channel 1080 P Full HD, Real time Recording and Reviewing in Compression Format. With HDD. along with dedicated sever with sufficient Hard Drive to have memory of at least 30 days as per technical Specifications.

Supply of IT Hardware which includes required Static IP, Router, Switch, firewall system and A3 Colour printer as per technical specifications.

80” LED Display/ DLP Video wall System for monitoring of SCADA & surveillance system at SCADA control room as per technical specifications.

Online 3 KVA UPS with Battery system for power back up of Barrage control room equipment’s as per the technical specifications.

Supply of laptops & internet connection (4G/3G) along with Client SCADA software for remote viewing & monitoring of Barrage automation.

Supply of Diesel Generator Set 10.0 KVA with 04 Earth Pits for earthing along with accessories complete as per technical specifications.

Installation, testing & Commissioning of PLC/RTU system with software development of PLC/RTU, Control Panel with front door opening cabinet, fitted with Power buses, MCBs & modem. Suitable power supply to power up PLC/RTU panel, including 1 KVA UPS for Power back up of minimum 2 Hours, 7 inches or above HMI display & Industrial type electrical fitting & cabling with suitable conduits complete for all related field instruments, as per technical specification.

Installation, testing & commissioning of Shaft Encoder based rotary position sensor with Digital Display Type Gate Position Sensors for indication and monitoring of Spillway gates, Intake Gates, Silt flushing gates including cabling & integration with PLC/RTU as per technical specifications.

Installation, testing & commissioning of 3 Phase VFD Starter panel of 7.5 KW for each motor which consists of VFD, S.P.P, MCB, OLR, Timer, Main Switches including cabling & Electronic Digital Indicator complete as per technical specifications.

Installation, testing and Commissioning & integration of LTE Surveillance IP based 3G/4G Bullet Camera with Sim Card Slot, 2 Mega Pixel 2 OR4 Array/ 72 LED Colour camera. 6 or 8 or 12mm (according to site suitability) with storage facility of at least 24-hour video recording, in elegant metal Die cast housing. Outdoor weather resistant IP 66, communication with NVR located at Barrage control room for monitoring the gates operation complete as per Technical Specifications.

Installation, Testing & Commissioning & integration with NVR Located at Barrage/Dam Control Room of Pan Tilt Zoom (PTZ) Cameras, 36 X Optical and 12 X Digital Zoom; 2 Mega Pixel IP (DIGITAL) Camera, 500 mtrs. Night Vision (Multiple Intelligent Array system) in IP66 Weather Resistant Outdoor Metallic Housing. Outdoor weather resistant IP 66 including cabling & conducting required for Barrage monitoring.

Installation, testing & Commissioning of Water Level transmitter non-contact Ultrasonic type having 10m range for measuring downstream dischrge of head regulator in main canal system. Including all necessary cabling, conduits, electrical fitting & mast complete, as per technical specifications.

Installation, testing & Commissioning of Water Level transmitter non-contact RADAR type having 35m range for measuring Upstream level & downstream discharge of barrage. including all necessary cabling, conduits, electrical fitting & mast complete, as per technical specifications.

Installation testing and commissioning of Data logger of 2 channel input type with GPRS/GSM telemetry for data logging & transmission of real time data from level transmitters at River in the upstream of dam, to SCADA system, with all relevent mounting accessories, NEMA 4x housing enclosure, as per technical specifications.

Installation testing and commissioning of solar panel, charger regulator, batteries, lightening arrestor with all connectors, cables and conduit for cables for providing un interrupted power supply to dataloggers, as per technical specifications.

Installation, Testing & Commissioning of Main PLC Controller system with firm ware based hot redundancy which shall include software development of PLC, Control Panel with front door opening cabinet, fitted with Power buses, MCBs & modem. Including suitable switch mode power supply (SMPS) ,12” display & cabling with Industrial grade type electrical fittings for related remote PLC/RTU’s, as per technical specification.

Installation, testing & Commissioning of customized SCADA software for complete Barrage automation with life time licensed version as per technical specifications.

Installation, Testing & Commissioning of Master server with SCADA Software which includes Server with server Rack and industrial grade PC with USB, RS232/RS485, Ethernet Ports, OS Windows 8 or higher compatible to SCADA System complete as per technical specifications

Installation, testing & commissioning of NETWORK VIDEO RECORDER (NVR) 32 Channel 1080 P Full HD, Real time Recording and Reviewing in Compression Format. With HDD along with dedicated Hard Drive to have memory of at least 30 days as per technical Specifications.

Installation, Testing & Commissioning of IT Hardware which includes required Static IP, Router, Switch, firewall system and A3 colour printer as per technical specifications.

Installation, Testing & Commissioning 80” LED Display/ Video wall based System for monitoring of SCADA & surveillance system at SCADA Control Room as per technical specifications

Charges for high speed synchronous internet connection (min. 8 mbps upload and download speed) & Static IP for Five years.

Charges for 4G/3G internet dongles for five years which is to be provided along with laptops having lifetime licensed version of client SCADA software for remote viewing & monitoring of Dam automation as per technical specification.

Installation, Testing & Commissioning of Online 3 KVA UPS with Battery system for power back up of Barrage/Dam control room equipment’s as per the technical specifications.

Installation, Testing and Commissioning of Diesel Generator Set 10.0 KVA with 04 Earth Pits for earthing, Starter Panel, Energy meter & cabling Complete in all respects as per technical specifications.

Five Years Operation & Maintenance and Comprehensive Warranty for Barrage automation system as per Price schedule after final acceptance of SCADA & Surveillance system. This includes replacement of material & consumable as & when required at bidders’ cost. The cost of Communication for GPRS & SIM charges for data transmission, maintenance and other related charges. Minimum One Service Engineer shall be placed at Barrage Control room for Operation of SCADA & Surveillance system.

Training of the purchaser's personnel at the supplier’s plant and/or/onsite in assembly, start up, operation, maintenance and/or repair of the supplied goods. Course topics will include sensor calibration, PLC & SCADA configuration, data downloading, data retrieval, collection, Trouble shooting, processing maintenance requirements and procedure for equipment configuration, installation, site testing and commissioning including training kit containing course material in soft and hard copies.

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar.

Demolishing mud phuska/ Lime dhar/ Kharanja in terracing and disposal of unserviceable material within 50 meters lead.

Dismantling CI or asbestos rain water pipe with fitting and clamps including stacking within 50 meter lead:100mm dia pipe.

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable MATERIAL within 50 metres lead as per direction of Engineer-in-charge.

Dismantling stone slab/ terrazo chip flooring laid in cement mortar including stacking of serviceable MATERIAL and disposal of unserviceable MATERIAL within 50 meters lead. Of area 3 square meter and below.

Dismantling precast concrete or stone slabs in wall partitions etc. including stacking within 50 meter lead:thickness up to 40 mm.

Dismantling doors, windows and clearstory windows steel or wood shutter including chowkhats and holdfasts etc. complete and stacking within 50 meters lead: Of area 3 square meter and below.

Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meter lead.

Dismantling GI pipes (external work) including excavation and refilling trenches after taking out the pipes and including stacking of pipes within 50 meter lead: 15mm to 40mm nominal bore.

Brick work with F.P.S. bricks of class designation 75 in superstructure above plinth level upto floor V level in all shapes and sizes in :Cement mortar 1 : 6 (1 cement : 6 coarse sand)

Half brick masonry in Superstructure , above plinth level upto floor Three level using bricks of designation 75 Cement mortar 1 : 4 (1 cement : 4 coarse sand).

Plaster on new surface on walls in cement sand mortar 1:4 including racking of joints etc. complete fine finish :20mm thick ..

Providing and laying in position specified grade of cement concrete for RCC structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement for Beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc.M20 grade Nominal Mix

Providing and laying in position specified grade of cement concrete for RCC structural elements upto floor Three level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers (if required ) excluding the cost of centering, shuttering and reinforcement for Walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. M20 grade Nominal Mix.

Providing and laying damp-proof course with cement concrete grade M-150 (1 : 2 : 4) mortar prepared with 1% solution of water-proof compound complete as per specification .75mm thick.

Centering & shuttering with plywood or steel Plate including strutting, propping bracing both ways with steel props and removal of formwork for upto floor Three level for :Suspended floors, roofs, landings, staircases, balconies, girders, cantilevers, bands, coping bed plates, anchor blocks, sills, chhajjas, lintel, beam, plinth beam etc.

Centering & shuttering with plywood or steel Plate including strutting, propping bracing both ways with steel props and removal of formwork for upto floor Three level for : Columns, pillars, posts and struts etc.

6 mm thick cement plaster to ceiling of mix 1:3 (1cement : 3-fine sand)

Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor Three level. Thermo-mechanically Treated bars (Conforming of relevent IS code).

Providing and applying white cement based putty over plastered surface to prepare the surface even and smooth complete.

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade : Two or more coats on new work including preparation of base with primer, putty, lippy etc complete in all respect.

Painting exterior surface of Wall with 100% acrylic exterior paint of approved brand and manufacture to give an even shade with two or more coats including prepartion of base with sand papering, primer, putty, etc complete in all respect. New Work.

Providing and fixing 14 mm thick Acoustical with fine fissured tiles/ Mineral fibre high density tiles with butt edges false ceiling tiles of size 595x595 mm in true horizontal level suspended on inter locking metal grid of hot dipped galvanised steel sections ( galvanized @ 170 gsm/sqm.) consisting of main “T” runner with suitably spaced joints to get required length and of size 24x38mm made from 0.30mm thick (minimum) sheet spaced at 1200mm center to center and cross “T” of size 24x25mm made of 0.30mm thick (minimum) sheet, 1200mm long spaced between main “T” at 600mm center to center to form a grid of 1200x600 mm and secondary cross “T” of length 600mm and size 24x25mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600mm panel to form grids of 600x600mm and wall angle of size 21x21x0.30 mm and laying false ceiling tiles of approved texture in the grid including, wherever, required, cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main “T” runners to be suspended from ceiling using GI slotted cleats fixed to ceiling with 6 mm dia and 50mm long dash fasteners, 4mm GI adjustable rods with galvanised level clips spaced at 1200mm center to center along main T, bottom exposed width of 24mm of all T-sections shall be pre-painted with polyester paint, all complete at all heights as per specifications drawings and as directed by Engineer-in-Charge. ( The tiles should of 90 % RH avg. NCR 0.55 light reflectance> 80% thermal conductiveity K = 0.052-0.057 w/m K colour white. Fire performance class 0/class I(BS 476) with warranty against sag)

P & F 1st quality Heavy Duty Vitrified Double Charged tiles on floor, skirting and steps etc.in different sizes (thickness minimum 10mm) with water absortion less than or equal 0.08% and conforming to IS 15622 of approved make in all colour and shade, laid with 20 mm thick CM 1: 4 including grounting the joints with white cement and matching pigment etc complete.size 600 mm X 600mm.

Providing and fixing 1st quality MAT finished ceremic tile size 300mmx300mm confirming to IS : 13755 and IS : 15622 colour such as white, grey, ivory, fume red brown, light green, light blue and other light shades in floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (including the cost of cement mortar bed 1:4).

P & F 1st quality Heavy Duty Vitrified Polished Digital tiles on floor, skirting and steps etc.in different sizes (thickness minimum 10mm) with water absortion less than or equal 0.08% and conforming to IS 15622 of approved make in all colour and shade, laid with 20 mm thick CM 1: 4 including grounting the joints with white cement and matching pigment etc complete.Size 300mm x 450mm

Providing & fixing door, window, chowkhats and other frames, including antitermite treatment, M.S. flat, hold fasts of size 250 x 40 x 3mm fixed with M.S. bolt 5mm dia 50mm long duly embedded in cement concrete M-15 grade :Sal wood Grade - I.

Providing and fixing external grade board solid core single leaf flush door shutters ISI 2202-67 marked using Phenol formal dehyderesin in glue both sides with approved steel fittings complete as per annexure 'A' : 30 mm thick. Decorative teak veneer both side.

Providing and fixing fully paneled double leaf shutter for doors as per approved design and drawing with approved ordinary C.P./oxidized steel fittings as per Annexure – A’ and width of styles & top rails of 100mm and lock rails width of 150mm and bottom rails of 200mm width including teak wood beading of size 19mmx12mm on both faces complete 30 mm thick Nigeria teak wood grade - I: Wire gauge 24 gauge 14mesh of IS designation 85 gauge wires of dia0.56 mm panels - I.Providing Single leaf shutter instead of double leaf.

Providing and fixing aluminum work for doors ,windows, ventilators and partition with extruded built up standard tubular / appropriate Z sections and other sections of approved make conforming to IS :733 and IS :1285, fixed with rawl plugs and screws or with fixing clips ,or with expansion hold fasteners including necessary filling up of gap. at junctions , at top ,bottom and sides with required PVC/neoprene felt etc. Aluminium section shall be smooth ,rust free, straight ,mitered and jointed mechanically wherever required including cleat angle Aluminium snap beading for glazing /paneling , C.P. brass/ stainless steel screws Al. Tower bolt & Al. handle & Al. Aldrop etc.,all complete as per architectural drawings and the directions of Engineer- in – charge .(Glazing and paneling to be paid for separately). For fixed portion. Polyester Powder coating aluminum ( minimum thickness of powder coating 50 micron)

Providing and fixing aluminum work for doors ,windows, ventilators and partition with extruded built up standard tubular / appropriate Z sections and other sections of approved make conforming to IS :733 and IS :1285, fixed with rawl plugs and screws or with fixing clips ,or with expansion hold fasteners including necessary filling up of gap. at junctions , at top ,bottom and sides with required PVC/neoprene felt etc. Aluminium section shall be smooth ,rust free, straight ,mitered and jointed mechanically wherever required including cleat angle Aluminium snap beading for glazing /paneling , C.P. brass/ stainless steel screws Al. Tower bolt & Al. handle & Al. Aldrop etc.,all complete as per architectural drawings and the directions of Engineer- in – charge .(Glazing and paneling to be paid for separately).

For shutters builtup standard tubular sections of openable doors, windows & ventilators including providing & fixing hinges / rollers etc. and making provision for fixing of fittings wherever required (lockers shall be made for seperately). Polyester Powder coating aluminum ( minimum thickness of powder coating 50 micron).

Providing and fixing glazing in aluminium door, window ,ventilator shutters and partitions etc. with PVS / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge.(Cost of aluminium snap beading shall be paid in basic item.)With glass panes of 5.0 mm thickness ( weight not less than 10.0 kg/sqm) as per IS : 2835.

S&f fixed wire gauge of stainless steel of 14 mesh x 24 gauge to the aluminium window by Aluminium beading 20x3mm with suitable screws at not exceeding 150mm distance at all heights with all lead and lift with scafolding.

Providing and fixing P.V.C. door frame made from extruded PVC confirming to IS : 10151-1982 section having multi chamber cross section with a maximum wall thickness of 2.8 mm + 0.3 mm duly reinforced with steel tie rod at bottom, and weather seals complete P.V.C. door frame section (68 x 60 mm).

Providing and fixing of Plastic shutter Infill made from extruded multi chamber hollow P.V.C. section having cross section of 200 x 20 x 1 mm and shutter frame made from extrude P.V.C. section in the configuration of double walled 'C' section having an overall cross section of 40 x 37 mm and door fittings such as hinges, aldrop, Handles, stopper, locking bolt will be provided.

Providing and fixing curtain rods of 1.25 mm thick chromium plated brass plate, with two chromium plated brass brackets fixed with C.P. brass screws and wooden plugs, etc., wherever necessary complete:20 mm

Filling of sunk portion of roof with earthen pots of required height including filling voids with 1 : 2 : 4 light concrete, using brick bats complete leveling and dressing the surface by 50 mm thick cement concrete 1 : 2 : 4 as per specification.

Providing and fixing steel gate, grating , and grills made of angles, tees, square bars, flats,or black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide

Providing and fixing 16 mm M.S. Fan clamps of standard shape and size in existing R.C.C. slab including cutting chase and making good and painting exposed portion of the clamps complete. In new roof.

Providing and fixing 15 to 20 mm thick Granite stone slab mirror polished and machine edge cut in walls, pillars, steps, Shelves, Sills Counters, Floors etc. laid on 12 mm (Av.) thick base of cement mortar 1 : 3 (1 cement : 3 coarse sand) jointing with white cement mortar 1 : 2 (1 white cement : 2 marble dust) with pigment to match the shade of the granite slab complete including rubbing and polishing of : Green / Black / Other granite.Above 3601 Cm2 Slabs.

Polished Blue Kota Stone slab in steps, walls, pillars having fine machine cut edges laid on 12 mm (Av.) thick cement mortar 1 : 3 and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete : 30 mm thick slab area 2001 to 5000 Sq.Cm.

Providing and laying lime Dhar only 90 mm thick average on roofs on ground floor with 1 : 2 : 2 : 2 (1 lime putty : 2 surkhi or sand : 2 old lime mortar powder : 2 stone grit 12 to 20 mm) mix by volume with required quantities of Gur, Gugal, Methi, Hemp etc. Properly compacted and smoothly finished in all respect (JAIPUR PRACTICE) as per specifications.Add extra over item for each subsequent storey for thickness.Above 50 mm upto 100 mm

Providing gola (batta) in lime concrete using 50% lime surkhi / sand mortar 1 : 2 with grit along joint of walls and terrace finished with lime mortar 1 : 2 plaster with Gur, Gugal, Methi etc. in concave shape of size : 100 mm x 100 mm.

Providing and fixing bright finished Mortice lock of approved make Godrej or equivalent with pair of CP handles for doors with necessary screws etc complete (Best make of approved quality) as per direction of Engineer-in-charge.

Providing and Fixing superior quality like Hardvyn or equivalent hydraulic door closure.

M10 grade Nominal Mix 1: 3: 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size).

Painting with ready mix paint of approved brand and manufacture in all shades to give an even shade : New wood work (two or more coats)

Painting with ready mix paint of approved brand and manufacture in all shades to give an even shade : New steel work (Two or more coats).

Double Syphonic European W.C. with mounted W.V.C. flushing cistern of 10 litre capacity complete with all necessary internal fittings with Hydraulic seat cover.

Providing & Fixing premium qulaity WVC Wash basin with C.I. brackets duly painted & 32 mm C.P. brass waste coupling of approved make with PVC waste pipe complete. Size 550 mm x 400 mm dia for counter top.

P & F Bevelled edge Mirror/mirror with teak wood lipping around of special glass of approved make (Atul, Modi Guard, Saint Gobin or equivalent) complete with 6mm thick commercial ply base fixed to wooden screws & washers. Size 600 x 450mm x 4 mm thick.

P & F Towel Rail or Ring of approved quality/make: C.P. brass Towel Rail elbow type with concealed screws size 450mm (Heavy duty).

P & F Liquid Soap Container with brackets complete of approved make: C.P. brass

P & F Tooth Paste & Brush Holder of approved quality/make:C.P. brass (Heavy and Superior quality)

Providing & fixing C.P.flange for 15mm dia taps.

P & F Pilllar Cocks (IS :8934 Mark) of superior quality and approved make:C.P. Pillar cock, 15 mm dia nominal bore

P & F Bib Cock (IS : 8931 Mark), Superior quality of approved make:C.P. Brass bib cock,15mm nominal bore.

P & F Stop Cock (IS :8931 Mark), superior quality & of approved make:750 gm. 20 mm nominal bore.

P & F Ball Cock (IS :1703 Mark) with Rod & P.V.C. Ball complete :Brass wt. Not less than 300 gm,15mm.

P & F Divertors of superior quality and approved make:C.P. brass Tip-tone divertor bath spout with mixing valve.

P & F 15 mm. Dia Connection Pipe of approved quality/make :PVC pipe with C.P. Brass nuts upto length, 450mm.

P & F Shower arm 15mm dia of approved quality/make. size 300mm.(-do-).

P & F Bath Shower of approved quality/make.. C.P. brass of Heavy & superior quality, revolving with adjustable key 150mm.

P & F Gun-metal Non-return Valve or Check Valve (IS :Make) of approved make, superior quality:25mm nominal bore.Vertical

P & F PVC Storage Tank ISI Marked (IS : 12701) indicating the BIS license No), of approved make with cover, 25mm dia 1M long G.I. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including making connection etc., complete of approved design: 750 litres capacity.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. (Concealed work including cutting chases and making good the walls etc.,). 20mm nominal outer dia pipes.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. (Concealed work including cutting chases and making good the walls etc.,). 25 mm nominal outer dia pipes.

P&F rigid PVC Pipe (IS:4985 mark) class II/ (4 Kg. /Cm2.) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant.110 mm dia.

P&F rigid PVC pipe fittings (IS: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant:

Coupler (socket)

110mm dia

Socket plug 110 mm Dia

Bend 87.5 Dg., 110 mm dia

Pipe Clip 110 mm Dia.

W.C. connector with lipring 110 mm Dia.

Door Tee 110 mm Dia.

Nahni Trap with Jali 4”

Vent Cowel

Wiring of light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) of approved make in surface / recessed ISI marked medium duty PVC conduit & it's accessories, round tiles,Hot Dipped Galvanized Modular Box with earth terminal, 6 A Modular switch,Modular plate with grid plate, screws, making connections, testing etc. as required.

Short point (up to 3 mtr.)

Medium point (up to 6 mtr.)

Long point (up to 10 mtr..)

Wiring of twin control light/Call Bell point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) of approved make in surface / recessed ISI marked medium duty PVC conduit & it's accessories, round tles, Hot Dipped Galvanized M.S Modular box with earth terminal, screwless cage connectors for neutral looping in switch board & false ceiling point, 6 A two way Modular switch, Modular plate with grid plate, screws, making connections, testing etc. as required. Medium point (up to 6 mtr.)

Wiring of 3 pin 5 amp. Light plug point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade(IS:694) of approved make in surface / recessed ISI marked medium duty PVC conduit & it's accessories, Hot Dipped Galvanized M.S Modular box of 20 SWG with earth terminal, 6 A modular switch, 6 A modular socket, Modular plate with grid plate, screws, making connections, testing etc. as required.

On board

Short point (up to 3 mtr.)

Medium point (up to 6 mtr.)

Long point (up to 10 mtr..)

S&F following sizes (dia.) of ISI marked medium duty PVC conduit along with accessories in surface / recessed using saddles, clamps, fastener as required including cutting the wall, covering conduit and making good the same as required.

Supplying and drawing FR PVC insulated & unsheathed flexiable copper conductor ISI marked (IS:694) of 1.1 KV grade and approved make in existing surface or recessed conduit/casing capping including making connections etc. as required.

2 x 2.5 sq.mm + 1 x 1.5 sq.mm

2 x 4.0 sq.mm + 1 x 2.5 sq.mm

2 x 6.0 sq.mm + 1 x 2.5 sq.mm

Supplying and drawing PVC jacketed with annealed bare copper inner conductor & tinned copper conductor shielding foam PE dielectric coaxial cable of approved make in existing surface or recessed conduit/casing capping including making connections as required. RG - 6

Supplying and drawing PVC/ Polythene insulated and PVC sheathed unarmoured/ armoured telephone cable with 0.5 mm dia. Tinned / annealed copper conductor taped &confirming to ITD specification S/WS -113C of approved make in existing surface or recessed Unarmoured Telephone cable in existing surface or recessed conduit/casing capping. 4 pair

Supplying and fixing of power plug point Modular accessories on hot dipped galvanized modular on surface or in recessed with suitable size of grid plate with cover plate including cost of modular 16 amp. Switch and socket outlet , making connection , testing , etc. as required.

Providing & Fixing metal clad industrial plug top & socket unit with pin and sleeve typecontact on porcelin/bakelite base in sheet steel enclosure (without MCB) including making connection with lugs, testing etc. as required. Single Phase (Three Pin) 32 Amp

P & F Follwing modular accessories made out of unbreakable and fire retardent poly carbonate with silver contacts including making connections testing etc. as required

RJ-11 telephone jack single two line

5 Step Fan Regulator 2 Module

P& F following size mounting grid plates with cover plates 1/2 module

P & F following size hot dip galvanized M.S. box of 20 SWG with earthing terminal in recess/ surface suitable for modular accessories as required. 1/2 module

Providing & fixing 240/415 Volt MCB of breaking capacity not less than 10 KA (B/C/D tripping characteristic) ISI marked IS 8828(1996)/ conforming to IEC 60898 in existing board/sheets including making connection with lugs, testing etc. as required.

Single Pole MCB

6 Amp to 32 Amp rating

Four Pole MCB

40 Amp - 63 Amp rating

Providing & fixing recessed/ Surface mounting heavy duty horizontal type sheet steel distribution boards phophatised/ powder painted complete with copper bus bar, shorting link, neutral link, earth link and din bar, conforming to IS 13032 & IS 8623 including making internal DB terminations with copper lugs, testing etc. as required Double door (Three Phase), 8 Way

Plate Earthing as per IS:3043 with copper Earth plate of size 600mm x 600mm x 3.0mm by embodying 3 to 4 mtr. below the ground level with 20 mm dia. G.I. 'B' class watering Pipe including all accessories like nut, bolts, reducer, nipple ,wire meshed funnel, and C.C. finished chamber covered with hinged type with locking arrangement C.I. Cover, C.I. Frame of size300mm x 300mm complete with alternate layers of salt and coke/charcoal, testing of earth resistance as required.

S & Laying following size earth wire/strip in horizontal or vertical run in ground/surface/recess including riveting, soldering, saddles, making connection etc. as required. 8 SWG Copper Wire

Providing and laying PVC insulated & PVC sheathed armoured cable of 1.1 KV grade with aluminium conductor of IS:1554 Part-1 of Group2 of approved make in ground as per IS:1255 including excavation of 30 cm X 75 cm size tranches. 25 cm thick under layer of sand IInd classes brick covering, refilling earth, compaction of earth, making necessary connection testing etc. as required of size. 25.0 Sq. mm. 4 Core

Supplying and making one end termination with heavy duty single compression brass gland SIBG type aluminium lugs duly crimped with crimping tool PVC tape etc for following size of armoured PVC insulated & PVC Sheathed/ XLPE aluminium conductor cable of 1100 V grade as required of size 4 Core x 25 Sq.mm

P & F of IP 20 LED tube light 20 watt with external batten made from CRCA sheet steel suitable to replace T-8/T-12 tube light, integral driver, 2000 luman + 5% tolerarrce system luman efficiacy of 100 Lm/ watt minimum expected life time of 25000 burning hours, CCT 5700 K ANSI, CRI 80, driver efficiency >85%, Life expectancy of driver rnin 30000 hrs. PF 0,95 at full load/ 230 volt AC.

P & F 1200mm sweep BEE 5 star rated double ball bearing capacitor start, aluminium body & blade ceiling fan complying to IS 374:L979, I/p 50 watt at max speed & 230 volt, air delivery > 210 CMM, speed > 330 RPM with down rod upto 30 cm with 3 x 1.5 sqmm pvc insulated flexible copper conductor making connection testing etc as required

P & F of IP20 LED Recessed / Surface Mounted, Round / Sqaure Non-Dimmable Downlight with dle cast aluminum housing & Heat Sink for heat dissipation, high purity reflector with external BIS certified 2.5 KV surge protected driver having efficiency > 85% and in compliance to IEC standards. System Lumen efficacy of ~ 100 1m / watt and life time of minimum 35000 Burning Hours with 70% of intial Lumen maintaned, CCT 30000K / 40000K / 60000K , maximum power consumption should not more than the specified rating and Fixture shall be of CEcompliance.

Surface Mounting LED Downlight 12 Watt

Recessed Mounting LEDDownlight 9/10 Watt

P&F of Double ball bearing, capacitor start single phase metallic blade fresh air fan, in existing opening including cost of hardware , flexible copper conductor ,making connections, testing etc. as required. 225 mm sweep

P & F energy efficient / energy saving 9 Watt IP 20 LED Bulb cool white, in existing holder / fixture as required, minimum 900 Lumen output, 25000 burning hours, CCT 5700 K or 6500 K ( as per direction of Engineer incharge), ANSI, Lamp efficacy minimum 100 lumen/Watt, CRI 80, Driver efficiency >85%, PF 0.95 at full load/ 230 volt AC.

P & F ISI marked ding dong/musical chime bell including making connection testing etc. as required.

P & F of 4 star rated vertical storage water heater with outer casing made of M.S.sheet finished with anti-corrosive powder coating,inner tank made of pure electrolytic copper/stainless steel / SPHP, Tubular copper sheathed and Nickel plated heating element/ twin ceremic cartridge heating element, stem type thermostat and thermal cut out,Dual indicating lamps for power supply and thermostat,PUF insulation, Pressure relase valve,fusible plug etc. as required held in position with 4 no. rack bolts,duly wired with 3 core 2.5/4.0 Sqmm PVC insulated & sheathed copper conductor and 16 A/25A three pin plug top,including making inlet,outlet heavy gauge C.P./ Flexible alloy connection,testing etc. as required. 15 Ltr.

Supply, Fixing and testing of following capacity wall mounted stablisers having output voltage variation from 200 V to 250 V(+/-5%) with input voltage variation from 170 V to 260 V, time delay facility from 2 to 4 minute and high cutoff at 270 V with providing of 16 Amp plug top making connection etc complete in all respect 4 kVA

SITC of Air Cooled split type Air conditioners complete with Indoor unit(IDU), Out door unit (ODU), surface / concealed copper Refrigerant piping with insulation (EP foam pipe section) upto 3 Mtr (IDU to ODU), copper power cable upto 4 Mtr (IDU to ODU), R-22/R-410 Refrigerant, Remote, suitable for 400/230V +10% of 50 Hz ,1 /3 phase AC supply capable of performing cooling, dehumidification, air circulation of following capacity with Scroll / reciprocating / rotary compressor as specified. 1.5 TR with 5 star rating of BEE

P & F of 4 star rated vertical storage water heater with outer casing made of M.S.sheet finished with anti-corrosive powder coating,inner tank made of pure electrolytic copper/stainless steel / SPHP, Tubular copper sheathed and Nickel plated heating element/ twin ceremic cartridge heating element, stem type thermostat and thermal cut out,Dual indicating lamps for power supply and thermostat,PUF insulation, Pressure relase valve,fusible plug etc. as required held in position with 4 no. rack bolts,duly wired with 3 core 2.5/4.0 Sqmm PVC insulated & sheathed copper conductor and 16 A/25A three pin plug top,including making inlet,outlet heavy gauge C.P./ Flexible alloy connection,testing etc. as required. 15 Ltr.

iCAM SYSTEMS LLP

Alpha Pacific Systems Pvt. Ltd.

YOKOGAWA INDIA LIMITED