REPAIR TO ROAD AND ROAD FURNITURE ETC AT KWC AND METCALFE HOUSE AREA UNDER GE (I) RnD DELHI

Amount

Repair to pot holes any depth, not exceeding one Sqm each including sweeping free from dust and mud, or water scoring sunken surfaces in roads, path etc cutting around edges to at least 25mm in depth, making good by filling in screened and graded road metal, watering and well ramming including supply of road metal, complete all as specified and directed.

M&L for preparing of existing black top surface by brooming or brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dust etc and applying evenly a priming/ tack coat with bituminous primer of paving bitumen(VG-10/VG-30) @ of 5 Kg /10 Sqm with mechanical sprayer and laying of Bituminous premixed Semi Dense Asphaltic Concrete 25 mm thick consolidated thickness with binder content of paving bitumen (VG-30) @ 5.5 % by weight of total mix including supply of filler (OPC cement) as per design mix, spread using Mechanical sensor paver rolled and compacted with 8 to 12 ton power road roller to a required camber and gradient complete all as specified and directed. The content of Bitumen specified in this item is maximum content,in case, the quantity of Bitumen required is less as per approved design mix, the minus price adjustment for less quantity of bitumen shall be made @Rs.50.00/Kg Note:- "Material shall be broght at site from approved / authorised Hot Mix plant at any distance. Hot mix plant shall be got approved from GE(I).

M&L for Premix bituminous macadam using 40 mm well graded crushed stone aggregate with 4% binder content by weight of total mix (using paving bitumen of grade VG-30 grade confirming to IS: 73:2013), laid, rolled and compacted to required gradient and camber (consolidated thickness 75mm or less) completed all as specified and directed. Note:- (i) Mixing of bituminous concrete shall be in Hot Mix Plant. (ii) Premix bituminous concrete shall be designed considering the bituminous contents as specified and as directed. Hot mix plant shall be got approved from GE(I).

M&L for painting hinting lines on roads n exc 15cm wide with hot applied thermoplastic compound paint confirm to MOST specified painting as per manufacturers direction specification, mechanically applied to form 1.5mm thick film on road lined including cleaning and drying the existing road surface dust, oil, grease and moisture free surface before applying the paint complete all as specified and directed.

S&F in repair Plastic Speed Bump designed so dynamically and compact that it can bear maximum load on it. It is made of PE plastic material. Two highly reflective reflectors moulded in PMMA material welded with ABS base plate through ultrasonic welding process and then fixed on the speed bump so that dust and water cannot touch the reflectors inside area and thus it maintains its reflectivity for a long time. 04 Nos metallic bolts are used for installation on road. Available in Yellow and Black colours. Dimensions: L=750mm, width=250 mm & Height=75 mm to be installed complete all as specified and directed.

S&F in repair Road studs (Cat eyes) size 100mm x 100mm x 20mm made of Aluminium Alloy die casted dynamically designed very high impect strenght having 10 Tons Load Bearing Capacity, and fitted with highly reflective reflactors and 2 Nos. of 43 beads each side of red/ amber colours as approved fixed with epoxy complete all as specified and directed.

S&F in repair Stainless steel (Grade 304) hollow round or square pipe of any dia /size fixed as in posts / sheds/ chair / railing and making frame structure for fixing sign board with knock-down fixing system & Top Mounted Round Baluster made of 38 to 50mm mm dia Stainless steel 304 Grade ,channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engr-in-Charge including with making post holes or similar each n.exc 0.50 cum demolishing concrete and getting out, at least one/third height of poles/posts shall be embedded in PCC 1:2:4. The height of posts/poles shall be 1.5 to 2.5 mtr from ground level, complete all as specified and directed. Note:- Design/pattern of Railing shall be got approved by GE before commencement of work.

S&F in repair direction sign board of any size with 2mm thick aluminum composite panel comprising both side high intensity prismatic grade retro reflective sheeting as base and with cut out massage (legends borders letters / numerals etc) as directed with high intensity prismatic grade retro reflective sheeting both side site of boards with epoxy powder coating, including fixed over framed work of stainless steel all as specified and directed by Engineer-in-Charge. The following specification for sign board to be used:- (i) Paper used for printing should be 170 GSM 3M Reflective Vinyl. (ii) Printing of letter with Mutoh Eco Solvent. (iii) Base of Material should be used should be 3mm Alcabond

S&F in repair Solar Road Stud of 125mm x 125mm x 25mm single piece moulded Aluminium Alloy body with ability of having approx 10 Tons Load Bearing Capacity powered by monocrystal solar penel of 2.4V/0.3W, One Ni-Mh or Ni-CD Rechargeable Battery (1.2V/1600 MA), Six Super Bright LEDs with 10,000 to 18,000 mcd (Milicandela) with Flashing Frequency of 1-2 Hz and View distance approx. 1000mtrs, high brightness LEDs of red/ amber colours as approved with backup upto 3 days after full charge incl fixed with epoxy complete all as specified and directed. Make :- Dark Eye (DHRUV) , Sinor infrastucture, Oscar safety solution.

S&F as in repair Delinator/ reflective poles of MS 50mm dia and 600mm long with high reflective reflector on both sides of top portion of any colours complete including fixing in gound with necessary PCC work complete all as specified and directed.

S&F in repair for convex mirror for size 800mm to 1000mm made of PC material provided with suitable corrosion free MS pipes 75mm dia with necessary fixing arrangement including fix the mirror at necessary height as per site requirement, meant for road turning, intersections, curves, 'T' junctions, parking lots etc. ideal for surveillance, have clear and definite mirror image, having 130 degree of viewing angle complete all as specified and directed.

Demolition of PCC of any description and in any position not otherwise specifically provided including removing the demolished material out side MoD land in low laying area complete all as specified and directed.

S&F at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. complete all as specified and directed. (Precast C.C. kerb stone shall be as per sample kept in office of AGE B/R Delhi).

M&L for applying two coat of synthetic enamel paint over concrete/plastered surfaces along with prepration of new or previously untreated surfaces of any description over 10cm width or girth with one coat of priming paints plaster coat complete all as specified and directed.

M&L 100 mm thick cement concrete type D-2,1:4:8 (40mm graded stone aggrigate) as in sub floors, filling and mass concrete etc complete all as specified and directed.

M&L for PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in foundation, filling, Sub base and mass concrete complete all as specified and directed.

M&L for machine made Rubber moulded precast concrete interlocking paver block (coloured), pre polished of any shape and size with grey cement and pigment confirming to IS 15658-2006 of 60 mm thickness M-35 Grade, over and including 25mm average thickness sand cushioning complete all as specified and directed.

M&L for Rubber pressed coloured chequered concrete paving/ tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors using with grey cement and pigment over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing) removing and rubbish of the premises etc complete all as specified and directed.

M&L for glazed ceramic designer coloured tiles in stones Matt finsih of size 450x300x7-8 mm thick on vertical surface as in skirting/dado set and jointed in neat cement slurry and pointing to in white or coloured cement to match the surface over 10mm thick rendering in CM 1:4 on wall complete all as specified and directed.

Demolition of brick work built in cement mortar of any description complete all as specified and directed.

M&L for brick work with sub class `B` bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

All as per item Ser No 22.00 above but except bricks. (Note : Old Serviceable bricks obtained from item No 21.00 shall be reused)

M&L for 15mm thick rendering in CM 1:4 on brick/concrete surface finished even and smooth with out using extra cement.complete all as specified and directed.

M&L for prepration of newly plastered surface and apply two coat of cement base paint complete complete all as specified and directed.

Pradeep Bros