Development of Park

Engage of JCB for Leveling of Site ,Removal of Boulders and Waste Material including Driver beta , Fuel Charges including cost and conveyance of all material charges etc., completed

Earth work excavation and deposting on bank with an initial lead of 10Mts. and lift of 2 Mt.s in all soils including costand convaynceof meterials, labour charges etc. complete.

Supply and filling of stone dust including cost and conveyance of all materials, watering and labour charges for filling, overheads & contractor profit etc., complete under CC bed

Plain Cement Concrete (1:5:10) (cement: fine aggregate: Coarse aggregate) for foundations using coarse aggregate 40mm size hard, machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, sales & other taxes on all materials and including all charges for machine mixing, laying concrete in foundations for finishing top surface to the required level curing etc.,and overheads & contractors profit complete for finished item of work.

RCC grade M 30 design mix using 20mm graded metal (MORTH) including C&C of all materials, machine mixing, centering, laying, vibrating, curing, labour charges etc. complete. (For buildings & supersturcture upto 5 Mt height.)

RCC grade M 30 design mix using 20mm graded metal (MORTH) including C&C of all materials, machine mixing, centering, laying, vibrating, curing, labour charges etc. complete. (For buildings & supersturcture upto 5 Mt height.)

RCC grade M 30 design mix using 20mm graded metal (MORTH) including C&C of all materials, machine mixing, centering, laying, vibrating, curing, labour charges etc. complete. (For buildings & supersturcture upto 5 Mt height.)

Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) ( Fe 500 grade as per IS 1786-1979) of Make : Vizag Steel/TATA/SAIL/ Jindal etc., of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials and overheads & contractors profit etc., complete for finished item of work in all floors.(APSS No.126)

Construction of bricks masonary using second class bricks in 1:3 prop. including c&c of all materials, L.C., watering, tamping etc. complete.

Const. of RR masonry 2nd sort in CM (1:6) prop. Including c&c of all materials & labour charges etc. complete.

Plastering in 1:4 prop to dain 12mm thick including cost and convaynce of meterials labour charges etc comp

BLD-CSTN-11-4- (161): White washing Two coat with whiting of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work. (Qty as per ceiling & inne rplastering)

Provision for Gate and Name Board

Borewell & Greenary

Payment of Geologists charges for survay and selection of bore well point including all charges

Drilling of the tube well by down the hole hammer drilling to a finished dia of 165 mm dia 6 1/2 dia in all formations sutable for down the hole hammer drilling such as mediam hard rock to hard rock formation all consolidated formation etc. and remaining the bore to suit insertion of 140 mm PVC casing pipe any other relevent meterials required up to depth as depteched by the departmentally officers by excluding caps including transportation of drilling to work spot and bore development ( flushin the bore wells) and an average pressur of 100 PS2 conduction yieldest cre charges cost of all other charges as fixation of pipes assembly complete depth and as stipulated in shedule for any where the AP the entaire work should be carried out as per 2800 part - 11 1970-060 mts

Manufacture and supply and delivery of 180mm dia PVC casing pipes confirming to ISI specification WITH 6 KG/CM2 pressur including cost and conveyance and installation charges etc comp

TBSP-G.I-06 S& F 50 mm Nominal Bore GI pipe Light Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings &labour charges complete

Manufacture, supply, & delivery of High Density Polyethylene pipes (PE-100 Grade) for water supply conforming to IS 4984-2016 including transportation to any where in T.G, but excluding GST and specials etc., complete. (Supply upto 90 mm dia in coil & above 90 mm dia stright length in6 M.)

Lowering, Laying, jointing of PVC/HDPE/MDPE pipes as per BIS No.7634 part-III/75 for PVC and BIS No.7634 part-II/75 for HDPE pipes including earth work excavation, testing to hydraulic test pressure including cost of water with a water lead of 500m etc., complete, but excluding road cutting (BT/CC) charges., Complete.

Supply and Transportation of star rated 1.00 HP 10 Stage Single phase ISI submersible motor pumpset suitable for 4" Bore well. Makes: Texmo / CRI / KSB /Aryenvarsha / Lubi / Falcon (ELEC-5.6.2)

Supply and delivery of GI Special including cost and convayance of materials etc., complete

65 mm dia couplings

65 mm dia clamp set

65 mm dia 0.30 mtrs nipples

65mm dia gun metal gate valve

65 mm dia Non return Valve

ELEC-5.11.1 Supply and Transportation of control panel for single phase submersible motors up to 3 HP @ 220V 50Hz operating range between 80 to 240V including supply and fixing of Direct - on - Line LK (L&T) / SIEMENS / CROMPTON make Volt meter and Ammeter with starting and running capacitors assembled with ISI mark contactors and fitted with ISI mark MCB etc., complete.

(ELEC-1.6.2) Supply of 6 Sqmm WPTC (Weather Proof Twin Core) ISI mark Alluminium Wire. Makes : Polycab / GM / Million / V-Guard / Gold Medal / Kundancab / HPL / RPG / Nandicab / Nakoda / Payal / Finecab / Gemini / Vimal / Suncab / Stanjo / Rajnigandha / Orbit / Beljin / Pawancab

(ELEC-1.5.8) Supply of 4.0 Sqmm 2 Core PVC / XLPE Insulated Sheathed Multi Core Bright Annealed Bare Copper Conductor Heavy Duty Industrial Cables for Voltage Grade upto 1100 Volts as per IS: 694:2010 including all transportation charges etc complete. Makes : Finolex / RR kabel / Havells / Polycab / RPG / KEI / Gloster / V-Guard / Finecab / SPM / Gemini / Unistar / Windsor / Payal / Fortune Arrt / Avocab / Pawancab / Nakoda / HPL / Sudhakar / Bonton / Rajnigandha

Provision for Water Tank including cost and conveyance of all material charges Pipes,Taps , Gum , L bends , T Bends and Valves etc.,completed

(ELEC-8.5.1) - Fabrication, transportation and supply of 12 Mtrs Polygon High Mast with single section of 3mm thick of Bottom 360mm and Top 150mm dia with BSEN - 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate, having a base plate of size 520mm dia 16mm thick with its accessories. Mast shall be in single section for 12 Mtrs . Mast shall be hot dip galvanized and suiatble for wind velocity of 180 KMPH as per IS 875 part 3 including head frame, 2 point suspension system with steel rope 6mm dia (7/19) construction double drum winch / power tool , and necessary cable trailer connections and single speed motor with M 24 x 800 mm foundation bolts of required quantity, suitable for 6-8 luminaires with GLS type aviation twin lamp. Makes: BAJAJ / VALMONT / TRANSRAIL / SKIPPER / UTKARSH / LAASMA / CONSOUL

Earth work exacavation with a approximate quantity of 4.0 Cum for errection of 12 Mtrs high mast and refilling with a quantity of 0.53 Cum of PCC 1:4:8, 1.50 Cum M 20 grade concrete and (80 Kgs) reinforced steel of 12mm / 10mm / 8mm, Soil bearing capacity of 10 T/Sqm, Anchor plate with cost and conveyance of all above materials including labour charges for errection of High Mast and Carraige etc complete including soil testing. (ELEC-8.7.1)

ELEC-3.5.4 (d) - Supply and transportation of 150 W +/-10% (>=15000 Lumens) LED Flood light Luminaire made of pressure die cast aluminum housing with powder coated, having toughened glass cover, Suitable lens on LEDs, IP 66 (Silicon gasket ensures Optical & Electrical compartments are IP 66 ) protected, wide operating voltage range , P.F > 0.90, System having efficacy >110 lumens/watt, with Ingress protection IP66, Driver surge protection >10KV, THD<15%, CCT: 3000- 6500K as desired by the department and as per IS, CRI>70, Inbuilt Electrical protections like Over voltage, short circuit, Over load, Open Circuit, Miswiring, etc complete with BIS certification with 5 years warranty. The contractor has to furnish the manufacturer warranty letter, LM 79 and LM 80 certificates.LUMINAIRE MAKE : PHILIPS / OSRAM / GE Venture / CROMPTON / BAJAJ / Surya / Wipro / Jaquar / Eveready / Halonix / Keselec / HAVELLS /POLYCAB / SURYA / SYSKA./ Capart /Fortune Arrt / FIEM / Arraystorm / GM /Goldmedal / Panasonic / Silicon / Leksa /Orient / HPL / Valmont / Transrail LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG / LG LEDs.

ELEC-8.6.2 : Supply and fixing of suitable out door feeder piller box of size made with 14 SWG CRCA sheet with double door arrangement, making powder coating after processing of 7 Tank process, lock and key, hinges, rubber gasket, danger board,suitable angle iron stand for mounting the feeder pillar for connecting the nature switch with following. with cement concrete, including Supply and fixing of Legrand / Schnieder make 40A-63A, 4 Pole MCB as incomer, 6 Nos6-32A SP MCBs as out goings, indication lamps, din channel, 6 Sqmm 3 core copper cable for invidual light control, connectors, bus bars, shroudings, gland plates and provision for 3 phase energy meter etc., complete for finished item of work and suitable wiring provision

Supply of ISI marked 16sqmm 4 core XLPE insulated 1100V grade armored alluminium cable as per specification confirming to IS: 7098 (Part -I) makes: Torrent/Uncab/Polycab/Havells)ELEC.4.1.1(f))

Supply and Transportation of Outer dia 50mm and Inner dia 38mm double walled corrugated HDPE duct made as per specification BSEN - 500 86/IS 16205 Part- 24 : 2017 with all accessories like couplers,bends, end caps, Ts etc., complete.Makes: Bajaj / CPE(ELEC-4.9.1)

Supply and Delivery of Plants including Digging , Transportation Charges, Loading and Unloading Charges , Filling of Soil , Carpet grass and Sticks cost and conveyance of all material charge etc.,completed

Excavation for roadway in soil using manual means for carrying of cut earth to embankment site with initial lift of 3 mts and lead upto 50 m as per Technical Specification Clause 302.3 MORD

Laying of CC (1:5:10) using 40mm SS:5 HBG machine crushed metal and OPC including cost and convince of all materials, labours charges, centering machinery, laying in position, curing for 7 days and all incidental charges etc, complete for lean concrete.

PCC M15 using 20mm gauge HG metal including cost & conveyance of all materials, machine mixing, laying, vibrating, curing etc. complete

Supply filling & Spreading of good gravel including cost and conveyance etc complete.

Suppy, fabracation and fixing in position MS tubular trusses inculding cost and convenyance of all material, synthetic anamel paint, nuts and bolts and transport all labour charge etc Completed.

Supply of pre-painted gavaluma trapezoidal profile roofing sheets with point 0.50mm thickness,coating alu-zinc coting AZ150 GSM tensilar strenth 550 MPA,paint coating regular modified polister painting length maxium 12.00mtrs with regular range colours finished item work, but exculding the coast of purlins, trusses and cost of convenyance all material.

Brick masonry in C.M (1:6) prop. Using IInd class traditional size bricks of locally available size of 23x11x7cm having a crushing strength of not less than 35 Kg/cm² including cost and conveyance of materials to site, seigniorage fee, mixing of cement mortar and laying of bricks and mortar to specified thickness, watering, curing, including all scaffolding, hire and operational charges of machinery, all labour charges and all water lead charges etc., complete for finished item of work.

PCC M15 using 20mm gauge HG metal including cost & conveyance of all materials, machine mixing, laying, vibrating, curing etc. complete

Plastering to even surface of walls with 12mm thick in single coat in CM (1:3) finished smooth including cost and conveyance of all materials to site, Cost of seigniorage charges on all materials, all taxes, finishing, curing, scaffolding and all operational, incidental, labour charges etc., including cutting grooves where ever necessary etc., complete for finished item of work. (As per SS 903.)

Painting to new walls with 2 coats of water proof cement paint of apporved brand and shade over a base coat of approved cement primer grade I making making 3 coats in all to give an even shade after thourughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 912 for internal walls

Vinyl Flooring Sheets/ tiles having a nominal total thickness of 2 mm with a wearing surface impregnated polyurethane homogeneous mixture of PVC, Plasticizers, Urethane, colour pigments with wearing resistance and Fire Resistance as per standards

ELEC-3.3.7 Supply and transportation of (18W +/-10%) LED slimline panel Light with System Lumens≥1000lm, Housing made of Powder coated, round / Square with Protruded plastic Diffuser, IP20, Inbuilt Electrical protections like Over/Under voltage, short circuit, Over load, Open Circuit, Miswiring, LG7 standard applicable, operating voltage range of 150 to 265 Volts AC, P.F ≥ 0.9,Surge protection: 2KV, THD<10%, with high power LED's having efficacy of ≥ 90 lumens/watt,CCT: 0K/4000K/5600K ±300K, CRI≥70...Manufacture has to submit LM79,LM80 & Photobiological Safety Report. Luminaire Performance Complies to IS10322 (Part 5/Sec 3) & IEC 60598- 1,IEC 60529 & ISO certified company.LUMINAIRE MAKE : Trinic /Avni / Krips Lights / Stanjo / Cosmo / VRILISO / Pro-Lite / Goldwyn / Scintilla / JSTC Solar.LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM /SAMSUNG / LG LEDs.

Supply and Fixing of 1200 mm (48") sweep 230V, A.C 50 Hz.Ceiling fan with 3 Blades and double ball bearings with all standard accessoriesand 400W Mini Modular Stepped type Electronic Regulator with Cover Frame including providing fan hook of 12/15mm dia M.S. rod / bar grouted in RCC slab with making the slab as original and 19/20mm steel tube down rod of one meter length with bolts & nuts duly painted with matching colour of fan etc,. complete

ELEC-1.3.3 Supply of 6M Modular Cover Frame. Makes : Legrand Arteor / Schneider Zen celo / Honeywell Blenge Plus / Crabtree Murano / Logus Platina / Gold Medal GIFA / GM-Zenova / LK (L&T) Englaze / Million M-Vee

ELEC-1.3.2 Supply of Surface Mounted PVC Modular Gang Box Makes : Similar to Switches Make 6M

ELEC-1.5.5 Supply of 1.5 Sq.mm FRLSH PVC insulated 1100V grade as per IS:694 / 2010 specification for Copper cable. Makes : RPG / Anchor / Power Flex / Sun Cab / Delton / Benlo / Gloster / Gemini / Unistar / Windsor / Payal / SPM / Elleys / Fybros / Gold Medal / GM / Million / Sudhakar / Nakoda / Bonton