Renovation and Repair works to the Community Hall at Thermal Nagar

Amount

Providing two legged scaffolding using 10 to 13cm dia casurina posts of best quality, the distance between the two rows being 1.25m and the spacing of posts being 2m in both the rows with horizontal posts with 0.5m overlap on either side and braces at 2m,c/c including longitudinal and transverse middle braces to step up and providing a platform with country wood planks of 40mm thick and 1m width etc., in a complete form using coir and nails including cost of all materials, lead, lift, etc., complete.

Earth work excavation in all soils such as sand, silt or other loose soil, sandy loam and ordinary soil and depositing on bank with an initial lead of 10m and initial lift of 2m and disposing the excavated earth 1Km away from the site Including cost of materials labour, lead, lift, etc., complete.

Dismantling the existing PCC floor, drain and road, disposal of debris with a lead of 1Km and roughening the surface thoroughly with reebaklence fosroc acid/ equivalent with all labour, lead, lift, etc., complete.

Providing plinth protection to around the Block with P.C.C1:3:6 using OP Cement with 20mm size machine crushed HBG metal including cost of all materials, labour, lead, lift, etc., complete.

Chipping of damaged concrete surface and roughening the surface clearing away the debris including cost of all labour, lead, lift, etc., complete.

Clean removal of cracked, damaged cement plaster from walls and clear away the debris including cost of all materials, labour, lead, lift, etc., complete.

Dismantling the existing damaged RCC Structure and clear away the debris from the site including cost of all labour, lead, lift, etc., complete.

Providing RCC 1:1.5:3 using OP/PP cement with 12 to 20mm metal including cost of all materials, labours, lead, lift, tools, curing etc. complete.

Supplying fabricating and fixing in position of RTS rod for reinforcement including cutting bending tying and fixing in position including cost of all materials, labour, binding wire, lead, lift, tools etc., complete.

Providing centering and shuttering arrangement for supporting the R.C.C. sunshade, slab, columns etc., including cost of all materials, labour, lead, lift, etc., complete.

RCC 1:1.5:3 using the 6mm HBGS Jelly to the Roof ceiling, lintel for average thickness of 2mm including the cost of all materials, labours, lead, lift, etc., complete.

Plastering with CM 1:5, 12mm thick including cost of all materials, labour, lead, lift, etc., complete.

Providing Brick work in CM 1:5 using second class ground moulded Chamber burnt bricks (9" x 4 ⅜" x 2 ¾") including cost of all materials, labours, lead, lift, curing, etc. complete

Providing wall with glazed tiles of approved make first quality printed design and colour laid in CM 1:2, 10mm thick and pointing with white cement of 0.4 Kg/Sqm including cost of materials labour, lead, lift, etc., complete.

Supply and fixing floor tiles of 305 x 305 x 6mm first quality design ceramic tiles of approved colours in CM 1:3, 10mm thick and pointing with white cement 0.4 Kg/Sqm including cost of tiles labour, lead, lift, tools etc., complete.

Providing false ceiling with Thermocoal 25mm thick over the Aluminium section 25 x 25 x 1mm ( T & L angle) with 50cm c/c in one direction with 6mm dia M.S rod as stiffner at a distance of 1.25m c/c including cost of all materials, labour, lead, lift, scaffolding charges etc., complete

Plastering with CM 1:3, 10 mm thick for RCC works, rate including cost of all materials, labours, lead, lift, hacking the area, curing, etc. complete.

Dismantling of PVC doors, including removal of frame, hinges and fastenings and stacking at site as directed by the engineer including cost of all labour, lead, lift, etc., complete.

Supplying and providing New PVC paneled door shutters hollow type 200 x 20mm panels with 1mm wall thickness for panels and styles and rails of suitable size with 2mm wall thickness suitably reinforced using MS Angle / flat including cost of necessary Aluminium hinges and other furniture fitting such as screw, bolt and nuts 3Nos 3" Aluminium hinges 2Nos.3" Aluminium Tower bolt 2Nos, 4"Aluminium handles including cost of all materials, lead, lift, etc., complete.

Dismantling the damaged AC sheets & providing new Asbestos corrugated sheets, 6mm thick including cost of rafters which will be collected from scrap including cost of all materials, labours, lead, lift, safety measures, etc. complete

Replacing the damaged Western water closet of size 450mm while glazed earth ware with `P ' trap with sand cushion and forming flooring around the fixing Western Water closet of approved quality and colour and size with 'P' or 'S' trap with double flapped seat & seat cover with brass hinges and 10 Lit. capacity PVC low level flushing tank with all internal fittings & 15mm ball valve using 20mm brick jelly in lime concrete and plastering with cm 1:3, 20mm thick including cost of all materials, labours, lead, lift, curing, etc. complete.

Replacing the damaged Indian Water closet of size 450mm while glazed earth ware with 'P' trap and pair of porcelain foot rest with sand cushion and forming flooring around the water closet using 20mm brick jelly in lime concrete and plastering with CM 1:3, 20mm TK, including cost of all materials, labours, lead, lift, etc., complete.

Supplying and laying of 110mm dia and 63mm dia PVC pipe (6kg/cm2) for external sanitary pipe line at sunshade in connection with bathroom and toilet line including dismantling of existing PVC line, cost of all material, labour, lift, etc., complete.

Providing two coats with ready mixed plastic emulsion (interior walls) of first class quality paint & approved colour over a priming coat including cost of all materials, scaffolding charges, through cleaning of surface, labours, lead, lift, curing, etc. complete.

Colour washing two coats with shell lime including cost of all materials, labour, through scrapping of old surface, lead, lift, etc., complete.

Dismantling one course of pressed tile roof in cement mortar and relaying with new pressed tiles of size 20 x 20 x 2cm in cement mortar 1:3 mixed with crude oil 10% by weight of cement over a bed of 25mm surkhi concrete and pointing with same mortar including cost of all labour, lead, lift, etc., complete.

S.MURUGESAN