Construction of Modern Toilet Complex in Herbal Park, Swaraj Majra, Ward No 3, Baddi

Amount

Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. All kinds of Soil

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size)

Centering and shuttering including strutting, propping etc. and removal of form for :Suspended floors, roofs, landings, balconies and access platform

Centering and shuttering including strutting, propping etc. and removal of form for :Lintels, beams, plinth beams, girders, bressumers and cantilevers with water proof ply 12mm thcik.

Centering and shuttering including strutting, propping etc. and removal of form for :Columns, Pillars, Piers, Abutments, Posts and struts.

Centering and shuttering including strutting, propping etc. and removal of form for :Edges of slabs and breaks in floors and walls.Under 20 cm wide

Providing and laying in position cement of sprcified grade excluding the cost of centering and shuttering- all work up to plinth level: 1:4:8 (1 cement : 4 sand : 8 graded stone aggregate 40 mm nominal size) plinth including carriage of material in all leads & lifts.

Providing & laying cement concrete having strength of M-20 mixed design aggregate mechanically mixed and vibrated and curing complete excluding cost of form work and reinforcement for reinforced concrete works including carriage of material in all leads & lifts. Suspended floor, roofs, landings, shelves and their support, balconies, beams, girdirs, bressumers and cantilevers in all heights.

Column, pillars, posts and struts upto all heights.

Reinforced cement concrete work in beams, suspendedfloors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand) : 3 graded stone aggregate

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Mild steel and Medium Tensile steel bars

Applying cement slurry on R.C.C slab or cement cocrete work using 2.75 kg of cement per sqm. Of floor area before laying cement concrete flooring including cleaning of the concrete surfaces complete including carriage of material in all leads & llifts.

Brick work with common burnt clay machine moulded perforated bricks of class designation 12.5 conforming to IS: 2222 in superstructure above plinth level up to floor five level in cement mortar 1:6 (1 cement : 6 coarse sand) : with modular brick

Brick work with common burnt clay modular bricks of class designation 7.5 in foundation and plinth in Cement Mortar 1:6 (1 cement : 6 coarse sand).

Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 4.0 mm thick glass panes.

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate.

Cement plaster skirting up to 30 cm height, with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement. 18 mm thick

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.

Applying Jk/ Birla/ white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete including carriage of material in all leads and lifts.

Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives. New work (Two or more coats applied @ 1.43 litre/ 10 sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm.

15 mm cement plaster on rough/fair side of wall of mix: 1:6 (1 cement: 6 coarse sand) i/c carriage of material in all leads & lifts.

20 mm cement plaster of mix : 1:6 (1 cement: 6 coarse sand) i/c carriage of material in all leads & lifts.

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade: New work (two or more coats) over and including water thinnable priming coat with cement primer.

Providing and fixing Powder coated in aluminium door, window,ventilator shutters, frames ,glazing i/c glass panes and both sides limited board for doors/partition etc with PVC/neoprens gasket etc.complete as per the architectural drawings and the directions of Engineer-In_charge . Aluminum FRAME OF DOOR AND WINDOW ETC. i/c Handles , Tower bolts, locks complete in all respect. ( Market rates)

Providing and fixing 10mm thick anti skid water proof stain and impect resistent heavy duty vetrified tiles Nitco or equivalant 600x600mmx10mm manufactured of approved shade and colour of NITCO, NTC, GICO in flooring, treads of steps and landings laid over 12mm thick cement mortar 1:3 (1 cement : 3 sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete including cost of tiles where required to be cut i/c carriage of material in all leads & lifts.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with rey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

NARESH KUMAR

RAJ KUMAR