PROVN OF SENTRY POSTS AND RCC PLATFORM WITH GALVALUME SHEET SHED

Amount

M&L for Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in any type of soil.

M&L for cement concrete Type B2 1:2:4 (40mm graded aggregates) in foundations, filling and mass, complete all as specified.

M & L for Flat Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, complete all as specified.

M & L for cement concrete of M-25 grade (20mm graded aggregates) for Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete, complete all as specified.

M & L for flat Formwork to rough concrete surfaces sides of pillars, posts, struts, piers, columns and stanchions , complete all as specified.

M & L for cement concrete of M-25 grade (20mm graded aggregates) for Columns, pillars, piers, posts and struts, complete all as specified.

M & L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified.

M & L for Mild steel TMT bars 06mm dia to 08mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified.

M & L for Flat Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping, complete all as specified.

M & L for cement concrete of M-30 grade (20mm graded aggregates) for C Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified.

M & L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:4,complete all as specified.

M & L for Rendering work 10mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6, rendering is to be finished even and smooth (without using extra lime or cement) complete all as specified.

M & L for Rendering work 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4, rendering is to be finished even and smooth (without using extra lime or cement) complete all as specified.

M & L for Rendering work 05mm thick on fair faces of brick work or concrete surfaces (Celling) in cement mortar 1:3, rendering is to be finished even and smooth (without using extra lime or cement) complete all as specified.

Supply only integral water proofing compound.

M & L for Hardcore of gauge n exc. 63 mm, broken stone or boulder deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface, complete all as specified.

M & L for 100mm thick Cement concrete type D- 2, 1:4:8 (40mm graded aggregate) as sub base in floor, complete all as specified..

M & L for 50mm thick Cement concrete type B-1, 1:2:4 (20mm graded aggregate) as floor,Finishing cement concrete surface even and smooth without using extra cement complete all as specified..

M & L for Preparing newly surfaces plastered or unplastered wall for three coat of white wash, complete all as specified.

M & L for Preparing newly surfaces plastered or unplastered celling and applying three coat of white wash, complete all as specified.

M & L prepation of new plastered wall surfaces and applying two coats of cement base paint over a coat of primer complete all as specified and as directed directed by Engr-in-charge.

M&L 75mm thick cement concrete type C-2 , 1:3:6 (using 40mm graded stone aggregate as in plinth protection in alternative bay and surface finish even and smooth with out using extra cement complete all specified and directed.

M&L for Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm. complete all specified and directed.

M&L for Removing excavated material (soil) n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all specified and directed.

M & L for Apply APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application over evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sq.m including cleaning surface over 15 mm thick Screed bed or bedding layer in 1:4 cemnt mortar, complete all as specified.

Surface excavation not exc 30 cm and averaging 15 cm deep and getting out in Hard/Dense soil, all as specified.

M&L for 100mm thick Hardcore of broken bricks of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface

M&L for plain cement concrete 75 mm thick of 1:4:8, type D-2 (using 40mm graded crushed stone aggregate) as in levelling course of sub floors, sub-base, floors and paving etc., complete all as specified and directed.

M&L for 50 mm thick sand felling under floors or in foundation including watering and consolidation, complete ,all as specified.

M&L for 60mm thick M-35 grade machine pressed concrete interlocking paver block any shape and size confirming to IS 15658-2006, jointed with grey cement and no pigment, complete, all as specified.

M&L for Providing cement concrete of 1:2:4, type B1 (20mm greaded aggregate) in coping, roof kerbs or mud stops, rounded or chamfered on edges, complete, all as specified and directed.

M&L for riddled earth filling in trenches above and below the cable as in cable protection. Note:- Punned thickness shall be mesured and paid.

Material and Labour in replacement for XLPE insulated, armoured heavy duty electric cable with aluminium conductor, multi stranded, 1100 volts grade, cross-sectional area 10 Sqmm, 2 core with and including making connection by using necessary thimbles complete all as specified and directed

Supply and laid well burnt bricks sub-class 'B' designation 75 for cable protection, brick shall be laid dry flat as width of brick eqals to the length of cable and the gap between two adjacent brick shall not exceeded 10 mm, complete all as specified and as directed.

M&L for GI pipe 50 mm dia light grade with all fittings for cable protection laid under road/path/hard standing or fixed with wall/pole etc complete.

M&L for cutting of existing bituminous road/path/hard standing suitable for laying cable protection pipe 50 mm dia under the road/path/hard satnding at a depth not less than 60 CM below the normal ground level, Returning filling soil and making good the disturbed surface of road/path/hardstanding by using cement concrete mortar 1:3:6 type C2, using 40 mm graded stone aggregate 0.30 mtr wide and 0.30 mtr thick complete all as specified and directed.

M&L for concealed Point wiring one light point controlled by one, one way switch complete with 1.5 sqmm single core PVC insulted FRLS cable 1100 volts grade multistranded copper conductor drawn through in and including 20mm dia PVC rigid non metallic conduit concealed with all accessories such as internal bend, end caps etc complete concealed in walls and surface in ceiling/roof/etc including 1.5 Sqmm single core PVC insulated FRLS cable 1100 volts grade with multistranded copper conductor cable as earth continuity conductor including fabricated branded modular metal flush box concealed in walls with suitable modular plate with cover with suitable screws for housing switches, socket outlets, fan regulators etc all as specified and as directed. Note : Cutting chases and making good in wall / floor will be Measured and paid seperately.

All as per item No 37 herein before but one ceiling/exhaust fan point controlled by one, one way switch.

All as per item No 37 herein before but one switch socket outlet point 5 Amps on independent board.

S&F Switch Modular 6A single pole, one way, 1 module complete all as specified and as directed.

S&F socket Modular 6/16A 2/3 pin combined 2 module complete all as specified and as directed.

S & F module white cover plate with frame 3 module

S & F flush box 3 module

Supply and fixing LED lights fitting 1 x 22W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.

Supply and fix MCB DB, SPN, 4 ways, double door, 240 volt, Isolated neutral bar with IP54 protection, door earthing arrangement with cement spill protector, mechanical impact strength IK09 complete. Make: L&T/Legrand/ Havells

Supply and fix MCB SP 6 to 32 Amps, 240Volts, 10 KA, "B" Curve complete. Make: L&T/Legrand/ Havells

Supply and fixing SPN 32 Amp rating 240 V, 10 KA 'C' curve miniature circuit breaker (MCB) complete. Make: L&T/Legrand/ Havells

Supply and fix ceiling rose surface type bakelite 65 x 50mm with three terminals.

M & L Earthing complete with galvanised steel earth plate electrode 60cmx60cmx6mm thick burried directly in ground vertically to a depth not less than 2.25 metre below ground level with top edge of the earth plate at a depth not less than 1.5 M below ground level, earth plate surrounded by 15cm thick and packed with layers of charcoal dust and common salt , earth lead GI wire 4mm dia ( 8 SWG) connectd to GI earth plate elcectrode by means of bolts, nuts, check nuts, washers of galvanised iron, thimbles and other end of earth wire connected to main switch board/ feedar pillar and protected by galvanised iron pipe medium grade 15mm bore and 20mm bore medium grade GI pipe with funnel and wire mesh for watering including necessary excavation and earth works. PCC Chamber in cement concrete 1:2:4 type B-1 & RCC cover and all as shown in Electrical Plate No. 3 of SSR ( Part-I) of 2009. (i) The unit rate includes earthing wire, and protection pipe upto 7.5 metre.

Supply and fixCeiling Fans complete with blades, down rods, electroic regulator and accessories 230V, 1200mm sweep Min air delivery 210 FM with service value 6.00 BEE Five star rated with brushless direct current motor (BLDC)

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills,sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring,etc., and making good, cutting not exc 10 cm girth

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft loose soil

M&L for RCC nominal mix, type B0 1:2:4 (20 mm graded aggregate) in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete

S & F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc to FE 410-W (Gde-E-250) quality -A

S & F Pre - painted galvalume aluminium zink coating GI based corrugated steel sheet 0.50 mm thick of any color having tensile stregth of 550 Mpa as in roof covering/cladding fixed to walls fixed with self tapping screws as specified.

M & L for preparing new steel and iron surfaces of any description over 10 cm in width or girth, priming with red oxide and applying two coats of synthetic enamel paint over a coat of red oxide primer

Removal of excavated soil to a distance n. exc 100m and depositing where directed at a level not exceeding 1.50m above the starting point including loading, unloading complete all as specified and as directed.

UNIQUE INDIA CONSTRUCTIONS (BID ID -3107121)

eurekaenterprises (BID ID -3121346)