PROVN OF PARKING SHED WITH HARD STANDING AT HQ MB AREA URC AND PROVN OF LED STREET LIGHTS IN MALKIT COLONY UNDER GE (WEST) JABALPUR

Amount

Excavating over areas, n exc 1.5 m deep and getting out in any type of soil complete etc all as specified and directed.

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m depth for foundation etc or for shafts, wells cesspits manholes pier holes etc not exceeding 10 sqm on plan and not exceeding 1.5 m depth in any type of soil etc complete all as specif

Supply of laying Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete etc all as specified and directed.

Supply of laying Hardcore of Broken stone or boulders gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for PCC 1:4:8 type D2 (using 40 mm graded stone aggregate) as in foundations, sub base complete all as specified and directed.

M & L for 100mm thick Cement concrete type B-2, 1:2:4, using 40mm graded stone aggregate as in hardstanding complete all as specified and directed.

M&L for sand filling under floors or in foundation including watering and consolidation etc complete all as specified and directed.

M&L for RCC (Design mix) M-25 using 20 mm graded stone aggregates as in foundations, including rafts, footings, foundation beams, plinth beams, bases for columns, etc, basement slabs, under reamed piles and mass concrete complete all as specified and directed

M&L for RCC (Design mix) M-25 using 20 mm graded stone aggregates as in foundations, including Columns, pillars, piers, posts and struts , etc, basement slabs, under reamed piles and mass concrete complete all as specified and directed

Use and waste of Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed.

Use and waste of Formwork to sides of Formwork to sides of pillars, posts, struts, piers, columns and stanchions; and similar work; vertical or to batter complete all as specified and directed.

S&F TMT bar 10mm dia and over cut to length bent to shape required including cranking, bending spirally for hoping for columns hooking ends and binding with & including Mild Steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

S&F TMT bar 5mm dia and over upto and including 10mm dia as in stirrups, spacers & binders cut to length bent to shape required including cranking, bending spirally for hoping for columns hooking ends and binding with & including Mild Steel wire (annealed) not less than 0.9mm dia or securing with clips complete

S&F for machine pressed precast cement concrete interlocking coloured paver block rubberised any shape and size confirming to IS 15658-2006 of 80mm thickness, M-40 Grade over and including 40mm thick sand coushioning complete all as specified and directed.

M&L for precast cement concrete blocks 1:2:4 Type B-I (20mm graded stone agg) as in curb stone set in CM 1:3 complete all as specified and directed.

M & L for 25mm thick Cement concrete type B-0, 1:2:4, using 12.50mm graded stone aggregate as in hardstanding complete all as specified and directed.

S&F ENDURA out door tiles 60 cm x 60 cm x 12 mm thick rubberised mould set, jointed and pointed in neat cement slurry as in floors fixed over and including screed bed 15mm thick in CM 1:6 etc complete all as specified and directed. Make H & R Johnson, Brand-Endura designer digital series as approved by GE.

Excavating in post holes (or similar holes) in any type of soil each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface complete all as specified and directed.

M&L for Cement concrete Type B2, 1:2:4 using 40 mm graded stone aggregate as in grouting of post complete all as specified and directed.

S&F Structural steel work as in tubular trusses incl special shaped washer etc. complete using ERW or induction butt welded tubes confirming to IS 1161-1979 grade St-240 complete all as specified and directed.

M&L for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming Fe 410 -W (GdeE- 250) qualityA complete all as specified and directed.

M&L for Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment conforming Fe 410 -W (GdeE- 250) qualityA complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-16 complete all as specified and directed.

M&L for Pre-cast cement concrete block masonry with solid blocks, exc. 10 cm in cement concrete Type C1, 1:3:6 (using 20mm graded aggregate) in width and setting in cement mortar 1:6, complete complete all as specified and directed.

M & L for Providing, cement concrete PCC Type B-1 1:2:4 (using 20mm graded aggregate) as in in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed.

M & L for Cement concrete in surface channels and drains in type B2, 1:2:4 (using 40mm graded aggregate) as in benching and haunching complete all as specified and directed.

M&L for extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, incl forms, moulds, mitred stopped ends complete all as specified and directed.

M&L for brickwork with fly ash bricks(modular), straight or curved on plan exc 6m mean radius, built in Cement mortar 1:4 complete all as specified and directed.

M&L for rendering 15mm thick on brick work or concrete surface in CM 1:4 finished fair& even surface including mixing with water proofing compound as per manufacture instruction complete all as specified and directed. (WPC paid separately )

Supply only liquid water proofing compound ISI marked.

M&L for Preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of cement primer complete all as specified and directed.

M&L for prepration of New or previously untreated surfaces of steel of any description, over 10cm in width or grith, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide complete all as directed.

Ditto all as per above but n exc 10 cm in girth etc complete all as specified and directed.

S&F 0.80mm thick plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 120 grm/sqm complete all as specified and directed.

S&F bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wind ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed.

S&F mild steel anchoring bolts (machine made) with any shape and any dia screwed one end, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, of required length complete all as specified and directed.

S&F 200mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints including bends fixed to walls or any other support with MS work complete all as specified and directed.

Returning filling in including spreading levelling watering and well ramming in layers not exceeding 25 cm thick complete all as specified and directed.

Removing excavated material exceeding 250m but n.exc 500mtr and depositing where directed complete all as specified and directed.

S&F Sub Main Wiring two single core PVC insulated cable of size 6.0 Sqmm multistranded copper conductor two run drawing into and including concealed rigid non-metallic PVC conduit, medium grade not less than 25mm dia with all conduit fitting,fixing accessories and one run of 4.0 Sqmm multistrand copper conductor cable as continuous earth wire complete all as specified and directed by Engineer in charge Note :-Two Nos of 6.0 Sqmm Wire and one No of 4.0 Sqmm Earth wire in One RM length Measured as one unit length.

M&L for Point wiring with PVC insulated 1.5 sq mm multi stranded copper conductor cable 1100 volts grade drawn into and including concealed PVC conduit not less than 20mm (ISI marked) including all fitting and fixing accessories including sunk in cast iron/pressed steel terminal boxes duly painted with two coats of antirorrrosive paint outside and two coats of aluminium paint inside, 2.8mm thick hylam brand laminated white bakelite sheet cover for mounting of switches, sockets, fan regulators etc and PVC insulated 1.5 Sqmm multistranded copper conductor cable as earth wire and making good the disturbed surfaces to match with the existing surfaces complete all as specified and directed by Engineer in charge.

(a) One light point controlled by one switch.

(b) One socket point controlled by one switch on Independent board.

S & F Switch piano flush type AC 230 volts 5 Amps single pole one way complete all as specified and directed by Engineer in charge.

S & F Socket outlet 3 pin, 5 Amps and AC 230 volts flush type complete all as specified and directed by Engineer in charge

S & F Ceiling rose surface bakelite 65 mm x50 mm three terminal AC 230 volts flush type complete all as specified and directed by Engineer in charge

S & F Smart bright Batten Series, LED luminaire using LEDs 22 watt 110 LM/watt with diffuser which ensures uniform distribution and comfort batten series features latest LEDs and delivers consistent light output, stable color start Extruded Aluminum housing, Energy efficient, Flicker free start Inbuilt driver unit Suitable for wall and ceiling mounting using brackets complete all as specified and as directed. Make : Philips Cat part BN 021 LED 22S 6500 PSU GR SI or equivalent in Jaquar, Lukar

Supply & fix LED Security Light Luminaire 25 watt 6000K with .high power LED cool white,CRI 75,+/- 5% supply voltage 220/240/50 Hz, light engine driver base.pole adapter,powder coated pressure die cast aluminium with heat resistant toughened glass with lens GI pipe 40 mm dia medium Grade not less than with 1.2 m.long in any shape with 2 nos of pole fitting clamps made out of MS flat , nuts and bolts and painting with aluminium paint. complete all as specified and as directed. Make:Havells cat part no: LHDAUU7PA7J025 or equivalent in philips or bajaj.

S & F Sheet metal enclosure DBs Single Pole and Neutral 8 way with 200 Amps rated bus bar 240 volts single pole and neutral complete double door complete all as specified and directed by Engineer in charge Make: Legrand cat no :5076 21 or eq in SEIMENS /GE

S & F MCB single pole and Neutral 240 volts 40 Amps, B Series complete all as specified and directed by Engineer in charge Legrand cat no :4086 18 or eq in SEIMENS /GE

Supply and fixing MCB single pole 240 volts upto 40 Amps, B Series complete all as specified and directed by Engineer in charge Make: Legrand cat no :4086 90/92/93/94/95/96 or eq in SEIMENS /GE

Earthing complete with galvanised steel earth plate electrode 60 cm x60 cm x 6 mm thick buried directly in ground ,(Earth pit not less than 2.25 meter deep below ground level) with top edge of plate not less than 1.5 meter below normal ground level ,connected to and including galvanised iron earth wire 4 mm dia by means of nut, bolts, check nuts and washers of galvanised iron or steel complete all as specified and directed including testing on completion including the material and labour of the following : - (a) Excavation and earth work for drilling hole for electrode in any type of Soil. -1, reinforced with welded steel wire fabric weighing not less than1.87 Kg/ Sq meter. (c) Funnel with watering pipe of GI 20 mm nominal bore light grade and lugs etc complete all as specified and directed (d) 15 mm nominal bore medium grade GI protection pipe 5 meter long for protection of earthing lead complete all as specified and directed. (e) Requisite quantity of common salt and charcoal. (f) Testing of earthing.

Supply and fixing connecting and testing of Automatic Street light switch using infrared Sensor based Nature Switch for automatic switching of street lights, Nature switch operation should be based on Natural light lux level. Required illumination level for switching on is < 30 lux and for switching off > 10 lux. The sensor should also have part night operation facility for 4 - 12 hours. The sensor alongwith suitable power contactor, incoming-outgoing MCBs should be enclosed in a pole/wall moutaed enclosure made out of Rust proof, electric shock proof, termite proof and FR grade SMC junction box conforming to IP-54, The circuit should be suitable enough to take 8 kw single phase load with contactor 63 Amps conforming to IEC-60947-4-1/IS-13947-4-1 & incoming and outgoing MCBs of rating 63 Amps conforming to IEC-60898/IS-8828 and circuit wiring of minimum 16sqmm coper conductor wire in and including providing of 50x6mm flat iron clamp, necessary nuts and bolts complete all as specified and directed by the Engr-in-charge. Make of nature switch - Model No Swadeep-02EC8kw1P of Kakatiya Energy System or equivalent make of Bajaj/Healer, Make for Contactor- BCH/L&T/Schneider, Make of MCBs- Hager/Schneider/L&T/C&S, Enclouser - Sintex or equivalent

Taking down carefully Mid Mast light with pole and refixing the same incl pole painting and material and labour for providing cement concrete of suitable specification for coping of poles complete all as specified and directed.

Supply & laying 40mm bore galvanized steel tubing "light grade" with GI fittings in trenches/ under roads/ along pole/ wall for cable protection including suitable clamps for fitting on wall etc all as specified & directed by Engineer in Charge

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16.0 sq mm 4 core complete all as specified and directed.

Ditto all as per above but of cable size 10sqmm 2 core

Supply,laying & fixing double wall corrugated (DWC) pipes made of high density polythyline (HDPE) with all accessories i.e. all type of joints,Sockets,Elbows,bends and End caps etc.. all as specified and directed by Engr in Charge.of size 50 mm outer dia and 38 mm inner dia of Make;-Telerex/Tirupati or E-in-C approved Make

Supply, fixing and connecting LED street light fitting 60-75 Watt having LED as light source, optical system, heat sink and drivers into one compact housing which ensure the LEDs have a long life, colour temperature - cool white (5700k), Nominal voltage 240 voltage, system efficay >75lm/W, pressure die cast aluminium housing, gear-integrated electronic driver, CRI-70, protection IP-65/66, CLASS-I including GI pipe bracket, made out of GI pipe 40mm dia light grade 1.5mtr long bend to the shape 120 degree angle all as per site requirement including MS clamps made of F1 50x6mm complete with nuts, bolts & washer as per requirement for mounting fittings. complete all as specified and directed by the Engr-in-Charge. Make - C&S Cat Part No INDUS/70W/LS LTESS 30x2.5HPLED/LS or Wipro Cat part No LR02-671-xxx-57-xx or Bajaj Cat Part No 169900 BRTFG 75W LED I

Supply and fixing junction box made out of polycarbonate with IP 55/IP 65 protection of size 200 x 160 x 98 mm, 5 way having terminals for termination of cable with necessary nuts and bolts, Make- Hansal including -02 Nos polycarbonate cable gland Make : Hansal, 01 Nos DIN rail for mounting of MCB and 01 No, MCB SP, 10 KA, 06 Amps Make - Legrand in and including fixing clamp of FI 50 X 6MM with necessary nuts and bolts complete in ad including taking down all as directed.

Supply, fixing and connecting PVC insulated, round, sheathed, multicore, industrial flexible cable with bright annealed copper conductor, 1100 volts grade cable of size 1.5sqmm, 3 core, confirming to IS 694-1990 complete all as specified and directed.

Rai Construction Co

DOBARIA BUILDCON

Kirti Chandeliya and Assosicates

DEEPAK CONSTRUCTION

M/s ESS KAY Construction

M/S RAJ BUILDERS

kamakshi construction